53884
21
Verklein
Vergroot
Pagina terug
1/26
Pagina verder
21
Power save: To reduce the VCRs power
consumption when the VCR is
switched off.
Set Power save mode as follows:
[ON]: The power consumption is greatly
reduced when the VCR is turned off.
[OFF]: The power consumption is not
reduced when the VCR is turned off.
Refer to the followings when [Power save] is set to
[ON].
[VCR display] is automatically set to [OFF].
To turn the VCR on, keep the [VCR-ON/OFF] button
pressed on the VCR main unit. It is not possible to
turn it on with the remote control.
The Power save function does not work in the timer
recording standby mode. After all programmed timer
recordings have been made, and after all
programmed data have been erased, the VCR
switches over to the Power save mode.
When the VCR is off, Pay TV programmes cannot be
watched on the TV because the signal from the
connected decoder is not looped through. To watch
them, turn on the VCR.
VCR display: For automatic change of the
brightness of the VCR display when
the VCR is switched off.
Set the brightness of the VCR display as follows:
[ON]: Indications are brightly lit.
[OFF]: Indications are not lit.
[DIMMED]: Indications are dimly lit.
AV2: To select the type of external
source equipment which is
connected to the VCRs AV2 21-pin
socket.
Set the external source equipment as follows:
[DECODER]: When a decoder is connected.
[EXT LINK 1]: When a digital receiver which
transmits a special control signal
recordings via the 21-pin Scart
cable, for example the F.U.N.
receiver (TU-DSF30/S3) is
connected for the linked timer
recordings. (See page 13.)
[EXT LINK 2]: When an external equipment with a
timer function is connected for the
linked timer recordings.
(See page 13.)
[EXT]: When another VCR or a satellite
receiver is connected.
TV system: To select the type of colour TV
system to be used during playback
or during recording from an external
source.
Set the colour TV system as follows:
[AUTO]: The VCR automatically
distinguishes PAL, SECAM/
MESECAM system. If the picture
lacks colour, set to [PAL] or
[MESECAM].
[PAL]: When PAL system is used.
[MESECAM]: When SECAM system is used.
RFC system: To set RFC system the same as the
TV system of the connected TV.
Set the type of RFC system as follows:
[BG]: PAL B.G.H/SECAM B.G
[DK]: PAL D/SECAM D.K.K1.
[I]: PAL I
NTSC playback: To play back a video cassette
recorded in the NTSC signal.
Set the type of colour TV system as follows:
[PAL TV]: For TVs that can receive PAL
signal.
[4.43]: For TVs that can receive NTSC 4.43
signal.
Press the [OK] button to conclude the setting.
Press the [EXIT] button to exit the On Screen Display.
Language or Country Setting
Press the [MENU] button to display the Main menu
on the TV screen.
Press the [Cursor] buttons 34
to select [Other settings].
Press the [OK] button to display
Other settings menu.
Press the [Cursor] buttons 3421 to select
[Language] or [Country] and the entry field for
[Language] or [Country] in this order.
Press the [Cursor] buttons 34 to select the desired
language or country.
Press the [OK] button to conclude the setting.
Press the [EXIT] button to exit the On Screen Display.
Tape length
OSD
Power save
VCR display
AV2
TV system
RFC system
NTSC playback
Language
Country
: AUTO (2 E-240)
: 4:3
: OFF
: DIMMED
: DECODER
: AUTO
: DK
: PAL TV
: English
: others
Other settings
Panasonic VCR
MENU
OK
OK
EXIT
EXIT
OK
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic NV-HS820EE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic NV-HS820EE in de taal/talen: Engels als bijlage per email.

De handleiding is 0,52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info