13
Hot Surfaces
Take great care when removing hot food. Use oven gloves.
Multi-Stage (Sequential) Heating
The oven can be programmed with up to 3 different
stages to operate in sequence. These can be
MICROWAVE, GRILL, CONVECTION, FAN GRILL,
GRILL CONVECTION or COMBINATION functions.
If a required heating time is greater than 15 minutes on
HIGH or MEDIUM power, use 2 stage programming.
For 2 stage programming:
Follow steps 1-3 then enter the next heating
programme, and press START Pad.
For 3 stage programming:
Follow 2 stage programming and enter a 3rd heating
programme before pressing START Pad.
Recalling Convection Temperature
The temperature selected can be checked during
operation by pressing Convection Pad.
Temperature will be displayed for 3 seconds before
returning to remaining heating time.
The temperature cannot be altered during a programme.
Recalling Grill level is not available.
Preheat
For best results on Grill Convection the oven should be
preheated.
(see page 26)
Oven Lamp
The Oven Lamp switches off when the door is closed. If
you want to check the food, press Lamp Pad, it will
then illuminate for 10 seconds.
The Oven Lamp turns on whenever the door is opened.
Repeat Feature
You can repeat the same heating programme if you
press START Pad within 1 minute of the previous
programme finishing.
After 1 minute, if START Pad is not pressed the display
goes blank if the oven door is closed.
After 30 minutes returns to “0” if the oven door is open.
Stop/Reset Pad
Before heating: One press clears the display.
During heating: One press stops the heating cycle
and two presses clear the display.
N.B. see page 24 for operation whilst in Programme Lock.
Operating your Oven on Grill Convection
Grill Convection
