For your safety, please read the
following text carefully.
This appliance is supplied with a mould
three pin mains plug for your safety and
convenience.
A 13-ampere fuse is fitted in this plug.
Should the fuse need to be replaced,
please ensure that the replacement fuse
has a rating of 13 ampere and that it is
approved by ASTA or BSI to BS1362.
Check for the ASTA mark
or the BSI
mark
on the body of the fuse.
If the plug contains a removable fuse cover
you must ensure that it is refitted when the
fuse is replaced.
If you lose the fuse cover, the plug must
not be used until a replacement cover is
obtained. A replacement fuse cover can be
purchased from your local dealer.
Warning
If the fitted mould plug is unsuitable
for the mains socket in your home
then the fuse should be removed
and the plug cut off and disposed
of safely.
There is a danger of severe
electrical shock if the cut off plug is
inserted into any 13-ampere socket.
How to replace the fuse
The location of the fuse differs according
to the type of AC mains plug (figures A and
B).
Confirm the AC mains plug fitted and follow
the instructions below. Illustrations may
differ from actual AC mains plug.
Open the fuse cover with a screwdriver
and replace the fuse and close or attach
the fuse cover.
Figure A -
Figure B -
