577947
28
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
Read Before Using 02
SAFETY PRECAUTIONS 04
Washing Instructions 14
Optional Functions 22
Maintenance 23
Troubleshooting 27
Installation Instructions 31
Operating Instructions
& Installation Instructions
Washing Machine
(Domestic use)
Model No.
NA - 148VB4
NA - 147VB4
NA - 128VB4
NA - 127VB4
®
Thank you for purchasing this appliance.
- For optimum performance and safety, please read these instructions
carefully.
- Before connecting, operating or adjusting this appliance, please read the
instructions completely. Please keep this manual for future reference.
En g l i s h
NA-148VB4_English.indb 1 2011-12-26 13:58:14
2 - Read Before Using
Consider the Environment
Disposing of packaging
The packaging used to protect the
washing machine from damage during
transportation is all recyclable. For
information on recycling, contact your local
authority.
Disposing of Waste
Electrical & Electronic
Equipment
Information on disposal for users of
waste electrical & electronic equipment
(private households)
This symbol on the products and/or
accompanying documents means that
used electrical and electronic products
should not be mixed with general
household waste.
For proper treatment, recovery and
recycling, please take these products to
designated collection points, where they
will be accepted on a free of charge basis.
Alternatively, in some countries you may be
able to return your products to your local
retailer upon the purchase of an equivalent
new product.
Disposing of this product correctly will
help to save valuable resources and
prevent any potential negative effects on
human health and the environment which
could otherwise arise from inappropriate
waste handling. Please contact your local
authority for further details of your nearest
designated disposable point.
Penalties may be applicable for incorrect
disposal of this waste, in accordance with
national legislation.
Information on disposal in other
countries outside the European Union
This symbol is only valid in the European
Union.
If you wish to discard this product, please
contact your local authorities or dealer and
ask for the correct method of disposal.
Eco-friendly Laundry
Keep to the load limit of each -
programme.
The washing machine automatically -
adjusts the operating time of each
programme depending on the load.
You only need to use a preliminary wash -
if your laundry is heavily soiled.
Using the 60°C Cotton programme -
instead of the 90°C Cotton one will save
energy, and will remove ordinary stains.
For lightly soiled laundry, using the 15°C -
Wash programme instead of the 40°C
Quick programme will save more energy.
Detergent amount
Use the correct amount of detergent -
based on the detergent pack instructions
and local water hardness.
Adjust the amount of detergent -
depending on how soiled your laundry is.
When using a tumble dryer
To save energy, please select the correct
spin-dry revolution speed according to the
instruction of your tumble dryer.
This product complies with the directives
2006/95/EC and 2004/108/EC.
NA-148VB4_English.indb 2 2011-12-26 13:58:14
Read Before Using - 3
Contents
Read Before Using
Consider the Environment........2
SAFETY PRECAUTIONS ........4
Checking Your Washing Machine . . 7
Your washing machine .............7
Accessories......................7
Before You Start Washing ........8
Checking before use ...............8
Before initial use . . . . . . . . . . . . . . . . . .8
Preparing the laundry ..............8
Adding Detergent and Other
Chemicals ....................9
Detergent compartment ............9
Softener compartment.............11
Prewashing compartment ..........11
Using the Buttons and Dials .....12
Unlocking the door ...............13
Washing Instructions
Washing.....................14
Setting washing..................14
Required time ...................15
Setting the buzzer ................15
Changing settings while washing ....15
Selecting the Programme .......16
Power and Water Consumption...17
Details of Programmes .........18
Washing Delicates.............20
Wool programme.................20
Wool laundry loads ...............20
Tips for washing delicates..........20
Washing Blankets
and Bedspreads ..............21
Bedding programme . . . . . . . . . . . . . .21
Putting bedding into the drum .......21
Optional Functions.............22
Extra Rinse function ..............22
Child lock.......................22
Preset timer.....................22
Maintenance
Maintenance .................23
Cleaning the outside of the
appliance.......................23
Cleaning the door seal and window . .23
Cleaning the drain filter ............23
Cleaning the drum................24
Cleaning the detergent drawer ......24
Cleaning the water-supply filter......26
Preventing a frozen water-supply
hose ..........................26
Troubleshooting
Fault Checklist................27
Error Display .................30
Installation Instructions
Choosing the Right Location .....31
Carrying the appliance ............31
The right place for the appliance.....31
Installing a built-in washing machine..31
Moving and Installing...........32
Removing the anchor bolts .........32
Moving the appliance .............32
Levelling the appliance . . . . . . . . . . . .33
Connecting Hoses and Power
Supply . . . . . . . . . . . . . . . . . . . . . . 34
Hoses and cable lengths...........34
Water-supply hose ...............34
Water-drain hose.................35
Connecting to the power supply .....36
Checking After Installation.......37
Installation checklist ..............37
Specifications ................38
NA-148VB4_English.indb 3 2011-12-26 13:58:14
4 - Read Before Using
SAFETY PRECAUTIONS
Please read and follow these safety
precautions.
WARNING
This describes issues which could
cause death or serious injury.
General Use
This appliance is not intended for use -
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use
of the appliance by a person responsible
for their safety.
Children should be supervised to ensure -
that they do not play with the appliance.
Do NOT place a stand or a chair close to -
the appliance.
Children may be able to reach the
control panel or climb onto or into the
appliance.
Turn off the water supply to the -
appliance if it is not going to be used
for a prolonged period, such as during
a holiday. This is especially important
if there is no drainage around the
appliance.
If the water supply is left on, the water
pressure may unnecessarily increase
and result in a leak.
Do NOT install the appliance in a damp -
location or in a location exposed to the
weather.
This may result in malfunction,
deterioration, electric shock, or fire.
Do NOT pour or spill water directly onto -
any part of the appliance.
This may result in malfunction, electric
shock, or fire.
Keep sources of ignition, such as -
candles or cigarettes, away from the
appliance.
They may cause a fire or damage to the
appliance.
Keep flammable materials away from -
the appliance, for example, gasoline,
thinner, alcohol, or clothing soaked with
these materials.
They may cause an explosion or a fire.
NA-148VB4_English.indb 4 2011-12-26 13:58:14
Read Before Using - 5
SAFETY PRECAUTIONS
Power source and cable
Unplug the mains lead when cleaning -
the appliance.
Check the mains lead and mains plug for -
any damage.
If the mains lead is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified person to
aviod a hazard.
Do NOT use a mains plug adaptor or -
extension cable. There is a possibility of
overheating which may cause a fire. Use
an unused household mains socket, fully
rated at AC 220 V to 240 V. If you are
not sure, contact a qualified electrician.
ENSURE the mains plug is fully inserted -
into the household mains socket. If the
mains plug is not fully pushed in, a loose
connection may overheat and cause an
electric shock or fire.
Do NOT touch the mains lead or mains -
plug with wet hands.
Possibility of an electric shock.
Do NOT pull the mains lead but hold the -
mains plug to unplug the appliance.
Otherwise, there is possibility of damage
to the mains lead, which may lead to an
electric shock or fire.
To Prevent Injury
The installation of the appliance should -
be done by the manufacturers dealer or
service agent.
If the installation, test run and inspection
of the appliance are not carried out
following the installation method outlined
in these instructions, the manufacturer
will not be liable for any accident or
damage caused.
Do NOT dismantle, repair or modify the -
appliance.
There is a possibility the appliance may
malfunction which may result in a fire or
an injury. If repairs are needed, contact
your local Customer Service Centre.
Do NOT touch the laundry inside the -
drum until it has completely stopped,
as there is a possibility of injury. Keep
children away from the rotating laundry.
NA-148VB4_English.indb 5 2011-12-26 13:58:14
6 - Read Before Using
SAFETY PRECAUTIONS
CAUTION
This describes issues which could
cause injury or damage your
belongings.
General Use
Prior to use, turn on the tap and check -
the hose and connections for any leaks.
Improper connection could cause leaks.
The new hose-sets supplied with the -
appliance are to be used and that old
hose-sets should not be reused.
This appliance is only suitable for textiles -
labelled washing machine washable.
Do not connect to the hot water supply. -
This appliance works ONLY with cold
water.
Do NOT apply pesticide, hair spray or -
deodorant to the appliance.
Do NOT put any electrical equipment, -
for example, TVs, radios or battery
chargers, on or near the appliance.
Do NOT put too much laundry or -
detergent into the appliance.
This may cause damage to the
appliance.
REMOVE the anchor bolts before -
installing the appliance using a spanner
or similar tool. The anchor bolts are used
to transport the appliance.
If the anchor bolts are not removed, the
appliance will strongly vibrate during
use.
To Prevent Injury
Do NOT climb onto the appliance. -
This may cause injury or damage to the
appliance.
Keep fingers away from the door hinge -
when opening and closing the door.
Do NOT slide your hand (or unprotected -
foot) underneath the appliance when in
use.
Check all washing and remove all -
objects such as nails, pins, coins, clips,
metal wires, etc.
They may cause damage to other
laundry or the appliance.
Do NOT use the appliance to wash -
waterproof sheets or clothing. There is
a possibility of excessive vibration or
failure during the spin-drying cycle that
may result in an injury, damage to the
appliance or a water leak.
BE CAREFUL when draining hot water -
or any detergent out of the drum.
BE CAREFUL not to get laundry caught -
in the door seal when it is closed. This
may result in a water leak or damage to
the laundry during the wash cycle.
NA-148VB4_English.indb 6 2011-12-26 13:58:14
Read Before Using - 7
Checking Your Washing Machine
Your washing machine
Caution
Do NOT bend the mains lead when the appliance is running.
Accessories
Make sure that all the accessories are
supplied with the appliance.
Elbow (see page 35)
For fixing the water-drain hose
Liquid detergent level plate
(see page 10)
Cover cap (x4) (see pages 32-33)
Water-supply hose (see page 34)
Either one of these hoses is supplied with
the appliance.
Detergent drawer
(see page 9)
Door
Water-drain hose
Adjustable feet
(see page 33)
Drain filter cover
(see page 23)
Mains lead/
Mains plug
Door seal
Drum
(Washing/
spin-drying tub)
Standard
Hose
Hose with
water-supply valve
NA-148VB4_English.indb 7 2011-12-26 13:58:15
8 - Read Before Using
Before You Start Washing
Checking before use
For the appliance’s initial operation or
after a prolonged period of non-operation,
perform the following procedures:
Secure the water-supply hose.1.
Open the tap.2.
Connect the power.3.
Make sure that the water-drain hose 4.
is positioned towards a drain.
For more details, see page 35.
Before initial use
For the appliance’s initial operation,
operate the Cotton programme with the
default temperature setting, which is 40ºC,
WITHOUT any detergent or clothing to
rinse out residue or moisture.
Note
There may be drops of water or
condensation in the appliance due
to the factory inspection prior to
shipment. This is not a malfunction.
Preparing the laundry
Sorting clothing
Read clothing washing labels to help -
you sort them into different loads.
Sort the laundry by colour, by type of -
fabric, and by how soiled it is. Doing
so will help you choose the correct
programme and temperature for each
wash.
Clothes that are not colour fast should -
be washed separately. Wash denim
separately.
You should put bras with metal wires, -
tights, lace clothing and small items of
clothing into a laundry net to prevent
them or the appliance from getting
damaged.
Caution
Do NOT wash water-repellent
clothing.
There is a possibility of excessive
vibration or failure during the spin-
drying cycle that may result in an
injury, damage to the appliance or a
water leak.
Treating stains
Apply stain remover to stained portions.
For dirt and solid stains, wash lightly by
hand first.
Checking clothing
Check that pockets on clothing do not -
contain any objects that may damage
the clothes or the appliance.
Tie up any loose strings on the clothing -
and close zippers. Turn clothing with
raised fabrics and zippers inside out.
Otherwise, the clothes may be
damaged.
Remove any hair, animal fur, sand, -
and other materials with a brush before
washing.
NA-148VB4_English.indb 8 2011-12-26 13:58:15
Read Before Using - 9
Adding Detergent and Other Chemicals
Pull out the detergent drawer and add detergent or softener to the correct
compartment. Check the packages for the appropriate recommended amounts.
Caution
Do NOT use the appliance when the detergent drawer is removed.
This may result in a water leak.
Detergent compartment
The following detergents and additives may
be added to this compartment:
Detergent -
Water softening agent -
Stain remover -
Tub cleaning detergent or bleach -
If you use multiple chemicals in this
compartment for washing, add them in the
following order:
1. Detergent
2. Water softening agent
3. Stain remover
Detergent
Use only detergents that are recommended
for fully-automated washing machines.
Please use low suds detergents.
Caution
If the instructions on the package
indicate that detergent should be
placed in the drum, do NOT put it
into the detergent drawer.
These detergents may not flow well
and remain in the detergent drawer.
Liquid detergent1.
Note
Do NOT use liquid detergent with the -
Prewash function. It may flow away
during the prewash.
Add liquid detergent before you start -
washing.
Prewashing compartment
Softener compartment
Detergent compartment
NA-148VB4_English.indb 9 2011-12-26 13:58:15
10 - Read Before Using
Adding Detergent and Other Chemicals
Fit the liquid detergent level plate (included
with the accessories) into the detergent
compartment and use it as a mark to set
the amount of liquid detergent. Make sure
to detach the plate before running the
programme.
Note
Leaving the liquid detergent level
plate in the detergent drawer while the
programme is running may result in
water leakage, or diminished washing
and spinning performance.
For the Wool programme, use mild liquid
detergent.
Powdered detergent2.
Detergent reaches the drum only when
water flushes through the detergent
drawer. Thus, if you forget to add
detergent, run the Drain programme.
Then, add detergent and start washing
again.
To prevent powdered detergent from
remaining in the drawer, perform the
following:
Dry the inside of the drawer with a cloth. -
Make sure that the detergent is not -
lumpy when you add it as this may
cause a blockage over time.
Amount of Detergent
The amount of detergent you should use
depends on the following factors:
How soiled the laundry is -
The amount of the laundry -
Water hardness -
The amount of foam varies according to
the amount and type of detergent, how
soiled the laundry is, and the hardness and
temperature of the water.
Water softening agent
If you live in a hard water area (total
hardness of 1.3 mmol/L or higher), we
recommend the usage of a water softening
agent. For more details on water hardness,
contact your local water authority.
Use of a water softening agent can help
reduce the amount of detergent that is
required for each wash and help prevent
the formation of limescale deposits, which
may damage the appliance.
NA-148VB4_English.indb 10 2011-12-26 13:58:16
Read Before Using - 11
Adding Detergent and Other Chemicals
Undiluted
softener
Water
Softener compartment
The following additives may be added to
this compartment:
Fabric softener -
Laundry starch -
Fabric Softener
To prevent static, add softener before you
start washing. It will be automatically added
in the final rinse cycle.
Dilute concentrated softeners before you
add them. Add up to only 110 ml to the
compartment to avoid overflowing.
Rinse out the remaining softener with
a splash of water or a damp cloth after
washing. If it sticks to the compartment,
pull out the drawer and clean it out. (See
page 24-25.)
Note
Follow the directions on the softener
packages for the appropriate amounts.
If too much softener is added, it may
remain in the detergent drawer.
Laundry starch
Simply add laundry starch to the softener
compartment. It will be automatically added
to the clothing as part of the final rinsing
process. Make sure that you do not fill the
compartment over the MAX level.
If it is hard to pour, you can dilute the
starch slightly with water before adding it.
Note
After using starch, clean the detergent
drawer, especially the softener cover
(see page 24-25). Then, run the Rapid
15 programme WITHOUT detergent to
remove any excess starch in the drum.
Prewashing compartment
Detergent for prewashing
Whenever you use the Cotton (Prewash)
programme (
+
) always put
detergent for the prewash in this
compartment.
NA-148VB4_English.indb 11 2011-12-26 13:58:16
12 - Read Before Using
Using the Buttons and Dials
Colours
Rapid 15
Shirts
Bedding
Wool
Rinse
Easy-care
Quick
0
500
800
10001200
1400
Start/Pause
Sportswear
Spin
Drain
Off
Cotton
Cotton
Cotton-Eco
15ºC Wash
4
5
6
3 2
1
7 8
Model NA-148VB4
Programme selection dial1.
Use this dial to choose the best
programme for the laundry. (See pages
16.)
Spin speed dial2.
Use this dial to choose the spin speed
for the programme you have selected.
The spin speeds for each of the models
are as follows (5 levels):
148VB4 and 147VB4: 500, 800, 1000, -
1200, and 1400 rpm
128VB4 and 127VB4: 500, 600, 800, -
1000, and 1200 rpm
If you select a spin speed which is
higher than the speed available (see
page 18-19), then the max. speed is
applied.
Extra Rinse/Child Lock button 3.
Press this button to select the Extra -
Rinse function. (See page 22.)
Press and hold this button for 5 seconds -
to set the child lock. The controls will be
locked but the door will not be locked.
Perform the same operation to release
the child lock. (See page 22.)
Time button 4.
Press this button to preset the time for
when the washing starts. (See page 22.)
Temperature button5.
Press this button to choose water
temperatures ranging from cold (Cld)
to 90ºC. (90ºC is available only with
the Cotton and the Cotton (Prewash)
programmes.) You can choose hotter
temperatures for whites, cottons, or
soiled laundry.
Start/Pause button6.
Press this button to start or pause the
wash programme. The button blinks if
the wash is paused.
Water cut off/low water pressure 7.
warning light
This light flashes when water is not
supplied or insufficiently supplied. (See
page 30.)
Blocked drain filter warning light8.
This light flashes when the water-drain
hose or drain filter is blocked. (See page
30.)
NA-148VB4_English.indb 12 2011-12-26 13:58:16
Read Before Using - 13
Using the Buttons and Dials
Display on NA-148VB4
Start/Pause
9 10
Process indicator9.
This indicator shows the current process -
of the programme. The process consists
of wash
, rinse , and spin .
The light goes off when the wash is -
finished.
Remaining time indicator10.
This indicator shows the approximate -
time until the washing finishes. For
example, ‘200’ means 200 minutes.
Unlocking the door
The door automatically locks while in use,
and the
symbol is shown while the door
is locked. A click will be heard when the
door locks or unlocks.
Note
While the door is locked, if the -
appliance is switched off, or if there
is a power interruption, the door will
unlock after 1 or 2 minutes.
Press the Start/Pause button to unlock
the door during operation.
In the following cases, the door can’t be
unlocked even if operations are paused.
During spin-drying -
When the water level is beyond a certain -
level
Note
If you want to unlock the door, set -
the programme selection dial to Off,
and then select a programme (ex.
Cotton).
Caution
If you have to unlock the door
mid-programme, make sure that
water from the drum does not
overflow onto the floor.
Water and soap suds might come out
of the door and the door opening. You
may need a towel to soak them up.
NA-148VB4_English.indb 13 2011-12-26 13:58:16
14 - Washing Instructions
Washing
Open the door and put the laundry 1.
into the drum.
For details about preparing and sorting
the laundry, see pages 8 and 16.
Caution
Make sure that no laundry gets -
caught in the door.
Do NOT overload the drum. -
This may cause excessive vibration
or damage to the appliance.
Close the door.2.
Turn the programme selection dial 3.
either way to switch on the appliance
and select the programme.
A wash time will be displayed.
For more details about each
programme, see pages 18-19.
15°C Wash programme
This programme achieves the same
cleaning strength with 15°C low-
temperature washing as 40°C programme
(except for greasy filth).
Spin programme
With the Spin programme, the operation
starts from the drain process whether
there is water in the drum or not. After the
water drains out to a preset level, the spin
process starts.
Select a spin speed.4.
If you select a spin speed which is
higher than the speed available (see
page 18-19), then the max. speed is
applied.
Select optional functions.5.
Extra Rinse function (See page 22.) -
Temperature (See page 12.) -
Preset timer (See page 22.) -
Add detergent to the detergent 6.
drawer.
(See pages 9-11.)
Press the Start button.7.
The appliance starts supplying water
after draining.
Note
Whenever you start washing, the -
process display flashes to show
which function is in progress.
Before any programme is started, the -
appliance first drains out any water.
The buzzer will sound and “END”
will flash on the display when the
programme has finished, and the door
will unlock immediately.
Setting washing
Colours
Rapid 15
Shirts
Bedding
Wool
Rinse
Easy-care
Quick
0
500
800
10001200
1400
Start/Pause
Sportswear
Spin
Drain
Off
Cotton
Cotton
Cotton-Eco
15ºC Wash
7
5
4
3
Model NA-148VB4
NA-148VB4_English.indb 14 2011-12-26 13:58:16
Washing Instructions - 15
Washing
Caution
After a high temperature wash, be
careful to not burn yourself when
handling the laundry or touching
the inside of the drum.
Note
If the detergent is not completely -
removed from the laundry by using
the basic programme, use the Extra
Rinse function.
If the load is big, the laundry may -
stick to the inside of the drum. This
is normal.
Leave the appliance door open -
to allow the drum to dry out after
removing the laundry.
Remove the laundry and rearrange -
where necessary. Do not leave it in
the drum too long after the programme
ends, because colours may run.
Required time
Times depend on the programmes and
temperature settings that have been
selected.
Actual times may differ slightly from -
those shown.
The displayed times include the time -
needed for the water to fill up and to
drain out, thus they vary depending on
water pressure, drainage and amount of
laundry.
If the laundry in the drum needs to be -
balanced, times will be extended.
Setting the buzzer
To turn on or turn off the buzzer which
sounds when the programme has finished,
follow these instructions.
Simultaneously press and hold the
Temperature and Time buttons for at
least 3 seconds.
The buzzer setting will be turned off after
a beep is heard.
The buzzer setting will be turned on after
two beeps are heard.
Changing settings while
washing
After washing has started, the programme,
temperature, preset time and Extra Rinse
function cannot be changed.
To change the programme, temperature,
preset time, or Extra Rinse function
settings, turn the appliance off and then on
again.
NA-148VB4_English.indb 15 2011-12-26 13:58:17
16 - Washing Instructions
Selecting the Programme
Programme Description
148VB4
128VB4
Max load
147VB4
127VB4
Max load
Cotton
Daily washing for cotton, linen and
cotton blend items (For examples,
T-shirts, underwear, towels,
tablecloths)
8 kg 7 kg
+
Cotton
(Prewash)
Cotton programme with prewash
process for heavily soiled laundry
8 kg 7 kg
Cotton-Eco
Washing takes longer but consumes
less energy and water than the Cotton
programme.
8 kg 7 kg
Colours
For washing coloured cottons or
coloured cotton blend items separately
4 kg 3.5 kg
Easy-care
Gentle washing for cotton, linen, and
synthetics
4 kg 3.5 kg
Wool
Gentle washing for hand wash only
wool, machine washable wool, and
wool blends
2 kg 2 kg
Rinse Rinses washed laundry. 8 kg 7 kg
Drain Drains water from the drum.
Spin Spin-dries washed laundry. 8 kg 7 kg
Sportswear For synthetic sportswear 3 kg 3 kg
Bedding
For large items, for example, blankets,
curtains, and bedspreads
3 kg 3 kg
Shirts For shirts and blouses 2 kg 2 kg
Rapid 15
Washes a few lightly soiled items in 15
minutes.
2 kg 2 kg
Quick
Washes lightly soiled items in 68
minutes.
4 kg 3.5 kg
15°C Wash
For lightly soiled cottons, and linen
blends
4 kg 3.5 kg
NA-148VB4_English.indb 16 2011-12-26 13:58:17
Washing Instructions - 17
Power and Water Consumption
Programme
Temperature
Load
(kg)
Power
consumption
(kWh)
Water
consumption
(L)
Time
(mins)
148VB4
128VB4
147VB4
127VB4
148VB4
128VB4
147VB4
127VB4
Cotton 40°C 8 or 7 0.92 0.92 58 60 120
Cotton
(Prewash)
40°C 8 or 7 0.98 0.98 70 69 138
Cotton-Eco 60°C 8 or 7 0.76 0.80 48 45 200
Colours 40°C 4 or 3.5 0.91 1.00 48 52 100
Easy-care 40°C 4 or 3.5 0.60 0.61 55 47 85
Wool 30°C 2 0.10 0.15 50 50 40
Sportswear 40°C 3 0.63 0.62 42 42 100
Bedding 30°C 3 0.28 0.30 57 50 65
Shirts 40°C 2 0.70 0.60 45 44 80
Rapid 15 30°C 2 0.10 0.10 30 30 15
Quick 40°C 4 or 3.5 0.48 0.48 38 38 68
15°C Wash Cold 4 or 3.5 0.21 0.22 42 42 100
1) Results calculated regarding the maximum spin-dry revolution comply with EN 60456.
2) The power, water consumption, and times indicated in the table may vary depending on
variations in pressures, water hardness and temperatures, room temperatures, types and
amounts of laundry, voltage fluctuations, and which optional functions are used.
NA-148VB4_English.indb 17 2011-12-26 13:58:18
18 - Washing Instructions
Details of Programmes
Programme
Auto setting Manual setting
Temperature
Number
of
rinses
Approximate
time (min)
Temperature
Spin-dry revolutions
*1
(rpm)
Preset
Timer
Extra
Rinse
148VB4
147VB4
128VB4
127VB4
Cotton 40°C 2 120 Cold - 90°C 0 - 1400 0 - 1200
+
Cotton
(Prewash)
40°C 2 138 Cold - 90°C 0 - 1400 0 - 1200
Cotton-Eco 60°C 2 200 Cold - 60°C 0 - 1400 0 - 1200
Colours 40°C 2 100 Cold - 40°C 0 - 1400 0 - 1200
Easy-care 40°C 2 85 Cold - 60°C 0 - 800 0 - 800
Wool 30°C 3 40 Cold - 40°C 0 - 600
*2
0 - 600
Rinse Cold 3 36 Cold 0 - 1400 0 - 1200
Drain Cold 3 Cold
Spin Cold 15 Cold 0 - 1400 0 - 1200
Sportswear 40°C 2 100 Cold - 40°C 0 - 1400 0 - 1200
Bedding 30°C 3 65 Cold - 40°C 0 - 800 0 - 800
Shirts 40°C 2 80 Cold - 60°C 0 - 600
*2
0 - 600
Rapid 15 30°C 1 15 Cold - 30°C 0 - 800 0 - 800
Quick 40°C 2 68 Cold - 60°C 0 - 1400 0 - 1200
15°C Wash Cold 2 100 Cold 0 - 1400 0 - 1200
NA-148VB4_English.indb 18 2011-12-26 13:58:18
Washing Instructions - 19
Details of Programmes
1 If you select a spin speed *
which is higher than the
speed available, then the
max. speed is applied.
2 If you select a spin speed of *
800 rpm or higher with the
Wool or Shirt programme,
600 rpm is applied.
Programme
Auto setting Manual setting
Temperature
Number
of
rinses
Approximate
time (min)
Temperature
Spin-dry revolutions
*1
(rpm)
Preset
Timer
Extra
Rinse
148VB4
147VB4
128VB4
127VB4
Cotton 40°C 2 120 Cold - 90°C 0 - 1400 0 - 1200
+
Cotton
(Prewash)
40°C 2 138 Cold - 90°C 0 - 1400 0 - 1200
Cotton-Eco 60°C 2 200 Cold - 60°C 0 - 1400 0 - 1200
Colours 40°C 2 100 Cold - 40°C 0 - 1400 0 - 1200
Easy-care 40°C 2 85 Cold - 60°C 0 - 800 0 - 800
Wool 30°C 3 40 Cold - 40°C 0 - 600
*2
0 - 600
Rinse Cold 3 36 Cold 0 - 1400 0 - 1200
Drain Cold 3 Cold
Spin Cold 15 Cold 0 - 1400 0 - 1200
Sportswear 40°C 2 100 Cold - 40°C 0 - 1400 0 - 1200
Bedding 30°C 3 65 Cold - 40°C 0 - 800 0 - 800
Shirts 40°C 2 80 Cold - 60°C 0 - 600
*2
0 - 600
Rapid 15 30°C 1 15 Cold - 30°C 0 - 800 0 - 800
Quick 40°C 2 68 Cold - 60°C 0 - 1400 0 - 1200
15°C Wash Cold 2 100 Cold 0 - 1400 0 - 1200
NA-148VB4_English.indb 19 2011-12-26 13:58:19
20 - Washing Instructions
Washing Delicates
Wool programme
The drum spins gently in the Wool
programme.
For details about washing instructions, see
pages 14-15.
Wool laundry loads
Wool programme: 2 kg or less
Approximate weights
Wool sweater: 400 g
Tips for washing delicates
Putting laundry in the drum
Pile them one on top of each other.
Detergents
For wool items, use a mild liquid -
detergent. Other detergents may
damage the clothes.
With Wool programme, you may need to -
use the Extra Rinse function to remove
excess detergent from the laundry. (See
page 22.)
Hanging the laundry
Hang out white or light-coloured wool -
and nylon items away from direct heat or
sunlight.
After washing, lay out wool and nylon -
clothes, and return them to their normal
shape before hanging in the shade. This
saves on ironing too.
Hang wool items without folds or -
creases, or spread them out to dry.
Use hangers for shirts, blouses and -
trousers.
You may wrap a towel around the
hanger to approximate the clothing’s
shoulder width so that it will retain its
shape as it dries.
If clothing shrinks in the wash
Spread the item out to its original size on
an ironing board. Use dress pins to hold
the size and shape. Then, use an iron to
steam it and leave it to dry.
NA-148VB4_English.indb 20 2011-12-26 13:58:19
Washing Instructions - 21
Washing Blankets and Bedspreads
Bedding programme
For details about washing instructions, see
pages 14-15.
Make sure that the label of each item -
to be washed shows either the wash or
handwash symbol (
, ).
Wash only one blanket at a time. -
Washable
100% synthetic fibre blankets – up to -
3 kg
100% synthetic fibre futons and 100% -
cotton blankets – up to 1.5 kg (single
bed size)
Sheets -
Bedspreads -
100% synthetic fibre undersheets -
Non-washable
100% wool blankets -
Long-piled blankets -
Electric blankets (including cover) -
Putting bedding into the
drum
Fold down blankets or bedspreads 1.
into a quarter of their original size.
Put the blanket or bedspread to the 2.
drum.
Fold it while putting it into the drum.
Both ends of blanket should be directed
inward the drum
Caution
Do NOT roll blankets or bedspreads
into balls, nor haphazardly fold
them.
This may cause excessive vibration
and damage the laundry or the
appliance.
Note
Avoid using blanket nets. They prevent
the laundry from spinning properly.
NA-148VB4_English.indb 21 2011-12-26 13:58:19
22 - Washing Instructions
Optional Functions
Extra Rinse function
Note
Extra Rinse functions cannot be used
with certain programmes. (See pages
18-19.)
If you select it when it is unavailable,
an error alarm will sound.
Press the Extra Rinse button
to
select the function.
The button will flash.
Function
Description
Extra
Rinse
Rinse your laundry more
thoroughly with an extra
rinsing process.
Child lock
When the child lock is activated, the
controls are locked (the door will not
be locked). This prevents children from
changing the wash settings or playing with
the appliance.
Activating/deactivating child lock
Switch on the appliance.1.
Press and hold the Extra Rinse 2.
button for at least 5 seconds.
The
symbol light up to show that the
child lock is activated.
To deactivate, hold down the Extra 3.
Rinse button again for 5 seconds
(please ignore three beeps heard,
keep Extra Rinse button pressed until
it deactivates).
Preset timer
You can use the timer to preset the wash to
start anywhere from 1 to 24 hours later.
Note
Do NOT use detergent which does not
dissolve thoroughly with the preset
function, because the detergent might
cake up before the wash starts and not
flow out.
Setting a preset time
Set a preset time after you have selected
the programmed and optional functions
(see page 14).
Continuously press the Time button 1.
until the desired preset time is
displayed.
Press the Temperature button or the 2.
Extra Rinse button to set the preset
time.
The countdown has not started.
To cancel the preset time -
Press the Time button.
To change the preset time -
Press the Time button, then redo the
setting from step 1.
Press the Start/Pause button to 3.
activate the countdown.
To cancel the preset time -
Turn the programme selection dial to
‘Off’. (All settings will be cancelled.)
To change the preset time -
Turn the programme selection dial to
‘Off’. After reselecting the programme
and optional functions, redo the setting
from step 1.
NA-148VB4_English.indb 22 2011-12-26 13:58:19
Maintenance - 23
Maintenance
Cleaning the outside of the
appliance
Clean the outside of the appliance with a
soft cloth and mild detergent, for example,
kitchen detergent, and soapy water.
Warning
Do NOT splash water over the -
appliance.
Do NOT use cream cleansers, -
thinners, nor products containing
alcohol or paraffin oil.
Cleaning the door seal and
window
After each wash, perform the following:
Remove any objects from the door seal. -
Wipe the window and seal to remove lint -
and stains.
If lint builds up, it can cause leaks.
Cleaning the drain filter
We recommend cleaning the drain filter
every 1 month. Filter will have lint buildup,
reduces the water from the shower.
Switch off and unplug the appliance.1.
Open and remove the drain filter 2.
cover. Place a container to receive
the drain water in front of the drain
filter.
Carefully turn the drain filter 3.
anticlockwise to unscrew it.
Water may drain out. This is normal.
Then, remove the drain filter.4.
Remove any lint and debris.5.
Replace the drain filter and drain filter 6.
cover.
Reinsert the drain filter. Then turn it
clockwise until it touches the stopper.
Caution
BE CAREFUL when draining hot
water.
Drain filter
Stopper
NA-148VB4_English.indb 23 2011-12-26 13:58:19
24 - Maintenance
Maintenance
Cleaning the drum
If you keep using cold water in the
appliance, bacteria may build up inside
the drum and give off an odour. You can
avoid this by running the 90°C Cotton
programme once a month. (If you use a
scale remover, follow the manufacturer’s
instructions.)
Caution
Viruses and bacteria are not killed
in water temperature of 40°C.
Pathogens can spread via the
commingling of clothes and thus
transmit diseases.
Pathogens die at 60°C or higher.
However, using water temperatures up
to 90°C is unnecessary.
Note
Do NOT put laundry nor laundry
detergent into the appliance while it is
being cleaned.
If you use tub cleaning detergent or bleach,
put it into the detergent drawer before
starting the wash. The appropriate amount
to be used is about 30 ml. (See page 9.)
Cleaning the detergent
drawer
Detergent residue soon builds up if the
detergent drawer is not cleaned regularly.
Detergent build up may develop mould.
Depending upon which type of softener
cover the appliance is equipped with, follow
the corresponding instructions.
A Type B Type
Instructions for the A type
Pull out the detergent drawer.1.
Remove the detergent drawer by 2.
pulling it out while pressing down on
the middle of the softener cover.
Softener cover
NA-148VB4_English.indb 24 2011-12-26 13:58:20
Maintenance - 25
Maintenance
Pull your finger on the tab near the 3.
front of the softener cover then pull
it up to remove it from the detergent
drawer.
Wash out the old detergent with 4.
water.
Use a cloth to wipe the water from the
appliance.
Replace the softener cover.5.
Reinsert the detergent drawer while 6.
pressing down on the middle of the
softener cover.
Instructions for the B type
Pull the detergent drawer until it will 1.
not move anymore.
Then jiggle it until it is fully extended.2.
Move the detergent drawer up and 3.
down while pulling it out to remove it.
Pull your finger on the tab near the 4.
front of the softener cover then pull
it up to remove it from the detergent
drawer.
Wash out the old detergent with 5.
water.
Use a cloth to wipe the water from the
appliance.
Replace the softener cover.6.
Reverse the procedures to reinsert 7.
the detergent drawer.
Softener cover
NA-148VB4_English.indb 25 2011-12-26 13:58:20
26 - Maintenance
Maintenance
Reconnect the water-supply hose.8.
Tighten the plastic joint firmly.
Turn on the tap, then check for leaks.9.
Preventing a frozen
water-supply hose
If the appliance is delivered in freezing
weather conditions, after setting up, leave
it at room temperature for 24 hours before
using. This will ensure that the
water-supply hose does not get clogged up
with ice.
If your water-supply hose freezes, perform
the following procedures:
Wrap warm towels around the joints 1.
of the water-supply hose.
Add 2 to 3 litres of warm water to the 2.
drum.
Run the Drain programme. (See page 3.
14.)
Joints
Tap
Cleaning the water-supply
filter
Clean the filter if water is not supplied
properly.
Turn the tap off.1.
Switch on the appliance.2.
Select the Cotton programme, and 3.
then press the Start button. Drainage
begins when the appliance is started.
After 2 minutes, switch off the 4.
appliance. Water has been drained
out of the water-supply hose.
Disconnect the water-supply hose 5.
from the appliance.
Clean the filter, which is on the rear 6.
of the appliance.
Use a small brush, for example,
a toothbrush.
If the unit is supplied with the hose 7.
fitted with a water-supply valve turn
off the tap supplying the appliance,
disconnect the hose from the tap,
and then clean the filter on hose in
the same way.
about
50°C
Water-supply hose
NA-148VB4_English.indb 26 2011-12-26 13:58:20
Troubleshooting - 27
Fault Checklist
Problem Cause
Washing machine
Buttons do not work. The programme, temperature, preset time, or Extra Rinse -
function settings cannot be changed while washing is in
progress.
Child lock may be activated. (See page 22.) -
Door does not open. Door lock may be activated. (See page 13.) -
The water temperature or level may be too high. (See -
page 13.)
Unusual odour Rubber parts may give off a smell when you start using -
the appliance, but the smell will go away over time.
You can wash the drum by running the 90°C programme.
(See page 24.)
Wash
No water going into
the appliance.
The water tap might be turned off. -
The water-supply hose may be frozen. (See page 26.) -
The water supply may be disrupted. -
The water-supply filter may be clogged. (See page 26.) -
There is only a small
amount of water.
If you have paused the washing and then restart it, the -
appliance may drain out some water.
Do NOT pour water in through the door.
Water builds up
during the washing.
This is normal; water is automatically supplied if the -
amount of water has decreased. For heavy loads, the
water may fill up repeatedly.
Rinse/Spin
No water flows into
the appliance during
the rinsing process.
Before rinsing, the appliance spins to drain out remaining -
water. The water will fill up after that.
Rinsing begins
before the spin
process finishes.
After washing, excess foam may remain, so the water is -
drained out and refilled to wash it away. This feature is
called foam detection.
During spin-dry,
the drum stops and
rotates several times.
This is normal; the appliance has detected an unbalanced -
load and is trying to correct it.
Foam and water
remain in the door or
door seal.
Although some foam and water might remain depending -
upon the state of the laundry and the amount of detergent
used, the performance of the rinse cycle is unaffected.
Spin cycle repeatedly
starts and stops.
This is normal; intermittent spinning of the tub helps the -
spin process to operate quietly.
The laundry may be too light. If so, add one or two bath -
towels.
The laundry is still
wet after the spinning
finishes.
An unbalanced load is not corrected automatically. -
If the laundry is too light, add one or two bath towels. -
If the laundry gets tangled up, untangle it. -
NA-148VB4_English.indb 27 2011-12-26 13:58:20
28 - Troubleshooting
Fault Checklist
Problem Cause
Detergent and foam
There is no foam or
hardly any foam.
The amount of foam varies, depending on the -
temperature, level and softness of the water.
You may have put powdered detergent directly into the -
drum; you must put it in the detergent drawer.
You may not be using enough detergent. -
You may be using a reduced-foam type of detergent. -
Heavily soiled laundry and larger loads of laundry may -
reduce the amount of foam.
There is a lot of foam. The amount of foam varies, depending on the -
temperature, level and softness of the water.
You may have used too much detergent. -
The type of detergent you are using may cause excess -
foam.
Fabric softener
overflows.
The softener may have exceeded the MAX level for the -
detergent drawer. (See page 11.)
You may have spilt the liquid by closing the detergent -
drawer too strongly.
After the wash has
finished, powdered
detergent residue
remains.
You may have put powdered detergent directly into the -
drum; you must put it in the detergent drawer.
NA-148VB4_English.indb 28 2011-12-26 13:58:21
Troubleshooting - 29
Fault Checklist
Problem Cause
Time
The displayed
remaining time
changes.
The remaining time is estimated and corrected continually. -
Thus, the time displayed may change.
Noise
There is an unusual
noise or vibration.
There may be metal items in the drum. -
The anchor bolts may not have been removed. (See page -
32.)
The appliance may be on a sloping or unstable surface. -
If none of the above is the cause, contact your local
Customer Service Centre.
There is noise when
the water drains out.
This is normal; it is noise created by the operation of the -
drain pump.
There are noises
during washing or
rinsing.
This is normal; They are noises from the pump that -
circulates washing or rinsing water.
Others
The electricity supply
cuts out while the
appliance is on.
The appliance stops operating. When power is restored, it -
resumes operation from the point that it had stopped.
A circuit breaker
trips, interrupting the
power supply.
The appliance stops operating. When the breaker is reset, -
it resumes operation from the point that it had stopped.
However, we recommend finding and resolving the cause
of the trip before resetting the breaker.
The water supply is
disrupted.
When the water is supplied again, it may be impure at first. -
You have to disconnect the water-supply hose and drain
away the impure water through the tap. Make sure that the
water-supply hose has been reconnected before using the
appliance.
The display is not
clear.
The appliance may be in a brightly lit or sunlit area. -
NA-148VB4_English.indb 29 2011-12-26 13:58:21
30 - Troubleshooting
Error Display
Error What to do
Door is open
Make sure that the door is shut properly.
Unable to supply
water
Check for any of following problems.
The tap is closed. -
The water pipe or hose is frozen. -
The water supply has been disrupted. -
The water-supply filter is clogged. (See page 26.) -
If the red mark appears in the hose with water-supply valve, it
have been stop the water supply.
You should replace with a new hose.
Hose with water-supply valve
Unable to drain
Check the drain hose for any of following problems.
It clogs up. -
Its tip is immersed in water. -
It extends with joints. -
The water is frozen. -
Clean the drain filter if it clogs up. (See page 23.)
Overflow
Check for any of following problems.
The water-supply valve has failed. -
The water-supply valve triac has failed. -
Switch off and unplug the appliance. Shut off the tap and contact
your local Customer Service Centre.
Supply water is
cut-off or water
pressure is low.
If the light flashes, check for any of following problems.
The tap is closed. -
The supply water is cut-off. -
The supply water pressure is low. -
The water-supply hose is clogged or twisted. -
The water-supply filter is clogged. (See page 26.) -
Drain filter is
clogged.
If the light flashes, check for any of following problems.
The drain filter is clogged. (See page 23.) -
The water-drain hose is clogged or twisted. -
To restart the operation after an error message appears, set the programme selection dial to
Off, and then select a programme and start the operation.
NA-148VB4_English.indb 30 2011-12-26 13:58:21
Installation Instructions - 31
Choosing the Right Location
Carrying the appliance
The appliance must be carried by 2 or
more people.
Start by tilting the appliance backwards.
The appliance should be carried by two
people, one on each side holding it from
the bottom.
The right place for the
appliance
Make sure that there is enough space for
the appliance and that openings on the
base are not obstructed by a carpet.
186
597
602
547*
845
454
Dimension in millimetres
*for NA-127VB4 and NA-147VB4
Caution
Install the appliance on a flat, -
stable surface to avoid excessive
vibration and noise.
If the floor is not flat and stable,
contact your local Customer Service
Centre.
Do NOT install the appliance on a -
carpet or similar type of grounds.
Do NOT install the appliance in -
direct sunlight or in a place where
temperatures reach freezing.
Do NOT let metallic portions of the -
appliance come into contact with
metal sinks or other appliances.
Installing a built-in washing
machine
You need a space at least 60 cm wide. -
At least 2 mm of clearance on the sides,
and 5 mm of clearance above and
behind the appliance are required.
The counter above the appliance -
must be firmly fixed to the adjoining
cupboards.
Caution
Do NOT install the appliance as a
built-in washing machine with the
cover panel removed.
Cover panel
NA-148VB4_English.indb 31 2011-12-26 13:58:21
32 - Installation Instructions
Moving and Installing
Removing the anchor bolts
Four anchor bolts keep the interior of the
appliance in place while the appliance
is being moved. Remove them before
installation, using a spanner. Follow the
following instructions.
Note
The anchor bolts must be removed
before the appliance is operated.
They may cause excessive vibration.
Use the spanner to loosen the four 1.
bolts.
Rotate the bolts anti-clockwise.
Pull the bolts out horizontally.2.
Push each cover cap (included with 3.
the accessories) over each bolt hole.
Note
Make sure that you store the anchor
bolts, because they are used when
transporting the appliance. If the
appliance is passed on to another
person, make sure to give the anchor
bolts to that person.
Moving the appliance
Note
Make sure to install the anchor bolts in
the appliance.
Before you move the appliance
Shut the tap and run the appliance to -
drain the water. Drain any remaining
water from the drain filter. (See page
23.)
Depressurize the water-supply hose and -
remove it.
Disconnect the power cable. -
Install the anchor bolts. (See page 33.) -
NA-148VB4_English.indb 32 2011-12-26 13:58:22
Installation Instructions - 33
Moving and Installing
Installing the anchor bolts
Remove the four cover caps.1.
Insert the anchor bolts into each 2.
anchor bolt hole.
Tighten each bolt with the spanner.3.
Levelling the appliance
On each leg, loosen the plastic nut by 1.
turning it clockwise.
Adjust each foot by turning it 2.
clockwise or anticlockwise.
Use a spirit level to make sure that 3.
the appliance is properly levelled.
Tighten each plastic nut by turning it 4.
anticlockwise.
Caution
Make sure that all plastic nuts are -
tightened securely and the feet are
still bolted to the appliance.
If they are unbolted, the appliance
will move around.
Do NOT put cardboard, wood -
or similar materials under the
appliance to compensate for
unevenness.
Be careful not to destabilize the -
appliance when cleaning the floor.
Plastic nut
Foot
NA-148VB4_English.indb 33 2011-12-26 13:58:22
34 - Installation Instructions
Connecting Hoses and Power Supply
Water-supply hose
Caution
Do NOT connect the water-supply -
hose to a combination tap.
Do NOT twist, squash, modify, or -
cut the hose.
Optimum mains water pressure is 0.1 - -
1.0 MPa. If the water pressure exceeds
this value, install a pressure reducing
valve.
Water-flow from the tap should be more -
than 5 L/min.
Connecting the water-supply hose
Attach one end of the hose to 1.
the water inlet on the back of the
appliance and tighten the joint by
hand.
Attach the other end of the hose to 2.
the tap and tighten it the same way.
Standard hose -
Hose with water-supply valve -
Open the tap slowly and make sure 3.
that there are no leaks around the
joints.
The joints are subject to water pressure.
Follow the instructions in this section to prevent water leaks. If you are unsure, ask a service
agent to connect the hoses.
Hoses and cable lengths
Left side connections Right side connections
* for NA-147VB4, NA-127VB4 models
~ 95 cm ~ 140 cm
~ 145 cm ~ 95 cm
~ 90 cm ~ 145 cm
0 – max. 100 cm
min. 10 mm
min. 10 mm
3/4”
3/4”
~ 100 cm* ~ 155 cm*
Make sure the
filter is inside
the hose.
NA-148VB4_English.indb 34 2011-12-26 13:58:23
Installation Instructions - 35
Connecting Hoses and Power Supply
Leak-proof System
The appliance is installed with the
system that is designed to prevent water
leaks. The system includes the following
components.
1) Aquastop system
If a water leak is detected in the water
inlet hose, the system stops supplying
water automatically. This system is only
functions with hoses with water supply
valves.
2) Overflow detection
If water in the appliance increases to
a certain level, this function stops the
water supply and activates the drain
pump.
Water-drain hose
Caution
Do NOT twist, pull out, or bend the -
drain hose.
Do NOT use joints to extend the -
water-drain hose.
Draining to a sink or wash-basin
Caution
The water-drain hose must be -
removed from the hook on the
rear side of the appliance before
the appliance is operated.
If the water-drain hose is close to
the appliance, the hose may come
in contact with the appliance and
generate noise during the spin cycle
because of vibrations.
Secure the water-drain hose so -
that it will not come out of the
basin.
Do NOT block the basin, where -
the drain outlet is. Make sure
that drainage into the drain is
sufficient.
Do NOT let the tip of the -
water- drain hose dip into the
drained water.
This can cause water to flow back
into the appliance.
Draining to a drain hose
Elbow
NA-148VB4_English.indb 35 2011-12-26 13:58:23
36 - Installation Instructions
Connecting Hoses and Power Supply
Connecting to the power
supply
Caution
The name plate indicates the rated -
power that the appliance needs.
Make sure that the power supply
specifications in your residence
match the information mentioned
here. The information on the
power supply specifications are
also mentioned on page 38 of
these instructions.
If the product is not correctly -
grounded, the user will be liable
for any damage incurred.
Name
plate
NA-148VB4_English.indb 36 2011-12-26 13:58:23
Installation Instructions - 37
Checking After Installation
Installation checklist
3
2
4
65
7
1
5 6 5 6
5) Adjustable feet
Are they bolted securely to the
appliance?
6) Stand cushions
Are they standing flat?
If the appliance is not level, there may
be abnormal sounds when water is
drained out.
7) Power supply
Is the household dedicated mains
socket, fully rated at AC 220 V to 240 V?
1) Anchor bolts
Have you removed them and attached
the cover caps properly?
2) Location
Is the appliance on a flat, stable
surface?
Does it run without vibrating?
3) Water-supply hose
Is it free from leaks?
Is the water supply normal?
4) Water-drain hose
Is it free from leaks?
Does it drain normally?
NA-148VB4_English.indb 37 2011-12-26 13:58:23
38 - Installation Instructions
Specifications
NA - 148VB4
NA - 128VB4
NA - 147VB4
NA - 127VB4
Rated voltage 220 - 240 V
Rated frequency 50 Hz
Maximum energy rated power input 2200 W
Heating energy rated power input 2000 W
Product weight 77 kg 73 kg
Maximum mass of dry cloth 8 kg 7 kg
Product
dimensions
Height 845 mm
Width 597 mm
Depth 602 mm 547 mm
Water consumption Refer to “Power and Water Consumption”.
Pressure of tap water 0.1 - 1 MPa
NA-148VB4_English.indb 38 2011-12-26 13:58:23
NA-148VB4_English.indb 39 2011-12-26 13:58:24
Web Site: http://panasonic.net
Pursuant to the directive 2004/108/EC, article 9(2)
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
© Panasonic Corporation 2012
Printed in Turkey
March 2012
W9901-W8FA00
NA-148VB4_English.indb 40 2011-12-26 13:58:24
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic NA-127VB4 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic NA-127VB4 in de taal/talen: Engels als bijlage per email.

De handleiding is 8,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Panasonic NA-127VB4

Panasonic NA-127VB4 Gebruiksaanwijzing - Deutsch - 40 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info