628266
161
Verklein
Vergroot
Pagina terug
1/172
Pagina verder
Message Cause and Solution
Sub-Camera source is not
compatible.
A cable or cord is not properly connected.
Check that all cables to the unit are connected properly
(Page 84).
The signal input from the sub video camera is invalid.
A valid signal cannot be received from the connected sub video camera.
Contact your dealer.
Check display resolution.
The computer’s display resolution or refresh rate is incompatible with
the unit.
Set
your computer’s resolution and refresh rate to a setting compatible
with the unit (Page 78).
If any of the other parties is using a software version older than 3.00
(not including 3.00), you cannot use HD or WXGA for PC input
resolutions.
Set your computer’s resolution to VGA, SVGA, or XGA (Page 78).
n is already in use.
Note
The IP address is
represented by n.
On the network you are using, another device is already using the IP
address you have input for the unit.
Make sure that all devices on the network have unique IP addresses
assigned.
Cooling Fan Malfunction.
Please turn off the system
and call for service.
The CPU cooling fan within the device has stopped.
Quickly turn off the power. Contact your dealer.
Check main camera setting.
<Check camera>
Set the main camera
HDMI output to 1080i.
<Safe Mode>
If [#] is pressed, the system
enters
safe mode after restart.
A
standard definition (640 ´ 480p, 720 ´ 480p) video camera signal has
been detected.
Change the video camera’s resolution to HD (1920 ´ 1080i).
Note
If you enter Safe Mode during a video conference call, the call will
be disconnected.
Check main camera setting.
<Check camera>
Set camera operating
frequency to nHz.
<Safe Mode>
If [#] is pressed, the system
enters
safe mode after restart.
Note
The field frequency
setting of the unit (50
or 60) is represented
by n.
A video camera with a different field frequency to the unit has been
detected.
Use a video camera with the same field frequency as the unit.
Note
If you enter Safe Mode during a video conference call, the call will
be disconnected.
Check sub camera setting.
<Check camera>
Set the sub camera HDMI
output to 1080i.
<Safe Mode>
If [#] is pressed, the system
enters
safe mode after restart.
A
standard definition (640 ´ 480p, 720 ´ 480p) video camera signal has
been detected.
Change the video camera’s resolution to HD (1920 ´ 1080i).
Note
If you enter Safe Mode during a video conference call, the call will
be disconnected.
Document Version 2013-09 User Manual 161
Additional Information
161

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic KX-VC300 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic KX-VC300 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info