Other programming
Changing the handset name
The default handset name is “Handset 1” to
“Handset 3”. You can customise the name
of each handset (“Bob”, “Kitchen”, etc.). This is
useful when you make intercom calls between
handsets. To display the handset name in
standby mode, turn on the handset name
display feature (page 33).
1MMENUN#104
2Enter the desired name (10 characters
max.).
3MOKN a MN
Displaying the handset name
You can select whether or not the handset
name is displayed in standby mode. The
default setting is “Off”.
1MMENUN#105
2MbN: Select the desired setting. a MOKN
a MN
Call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1MMENUN#256
2Enter the base unit PIN (default: “0000”).
RIf you forget your PIN, see page 47.
3Select the handsets to be restricted by
pressing 1 to 3.
RAll handsets registered to the base unit
are displayed.
R“ ” is displayed next to the selected
handset numbers.
RTo cancel a selected handset, press
the same dial key again. “ ”
disappears.
4MOKN
5MbN: Select a memory location. a MOKN
6Enter the phone number or area code to
be restricted (8 digits max.). a MOKN a
MN
Enhancing security for phone
calls
You can increase the security of phone
conversations by setting this feature to
“Enhanced”. When “Enhanced” is selected,
is displayed. The default setting is
“Normal”.
1MMENUN#729
2MbN: Selected the desired setting. a MOKN
3MN
Note:
RIf you set repeater mode to “On”
(page 34):
– Security is set to “Normal” and is
displayed.
–“Security” is not displayed in the
display menu (page 27).
RWhen enhanced security is enabled, sound
may cut in and out during conversations.
Changing the base unit PIN
Important:
RIf you change the PIN (Personal
Identification Number), please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, see
page 47.
1MMENUN#132
2Enter the current 4-digit base unit PIN
(default: “0000”).
3Enter the new 4-digit base unit PIN. a
MOKN
4MbN: “Yes” a MOKN a MN
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333 33
Programming
