Main menu: “C
aller List”
*15
Operation Code
Viewing the caller list. #213 38
*1 If you program these settings using one of the handsets, you do not need to program the
same item using another handset.
*2 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*3 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select “Caller ID”. To turn this feature off, select “Manual”.
(Caller ID subscribers only)
To use this feature, set the date and time first (page 13).
*4 The preset melodies in this product (“Ringtone 3” - “Ringtone 40”) are used with
permission of © 2012 Copyrights Vision Inc.
*5 If you do not want the unit to ring before the caller information is received, set to “Off”.
(Caller ID subscribers only)
You can only remove the first ring if the unit rings 2 times or more by default, which depends
on your service provider/telephone company.
*6 This setting is available when you have the key finder (KX-TGA20EX). Read the installation
manual for more information on the key finder.
*7 For models with supplied key finders, the display shows “1:Finder1”.
*8 If you register 2 or more key finders.
*9 If you have 2 or more key finders.
*10 This menu is not displayed when repeater mode is set to “On”.
*11 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*12 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
You can access your service provider/telephone company “call waiting” service by having
the recall/flash time set at “100 msec.”, and then follow your service provider/telephone
company “call waiting” instructions to operate this service. (for Australia)
*13 The default setting will be as follows if you select the following regional codes when
changing the unit’s region setting (page 35):
“NewZealand” = “600 msec.”
*14 To prevent other users from joining your conversations with outside callers, turn this feature
on.
*15 This menu icon is displayed when the key finder is not registered.
Alarm
A
n alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
t
ime.
Important:
R Make sure the unit’s date and time setting
is correct (page 13).
1 MMENUN#720
2 Select an alarm by pressing 1 to 3. a
MOKN
29
Programming
