telephone banking services, etc.).
Press * before entering access numbers
which require tone dialling.
Handset equalizer
This feature clarifies the voice of the person
you are talking to, producing a more
natural-sounding voice that is easier to hear
and understand.
1 Press
while talking.
2 MbN: “Equalizer” a
3 MbN: Select the desired setting.
4 Press to exit.
Note:
R When this feature is turned on,
is
displayed while talking.
R Depending on the condition and quality of
your telephone line, this feature may
emphasise existing line noise. If it becomes
difficult to hear, turn this feature off.
R This feature is not available while using the
speakerphone.
Recording a telephone
conversation
Available for:
KX-TG8561 series (page 3)
Important:
R Before recording a conversation, you
should inform the other party that the
conversation is to be recorded. In case you
record without informing the other party, it
will cause the infringement of privacy and
civil liability.
1 Press
during an outside call.
2 MbN: “Record Call” a
3 To stop recording, press .
Note:
R To listen to the recorded conversation, see
page 48, 49.
Call share
You can join an existing outside call.
To join the conversation, press M
N when
the other handset is on an outside call.
Note:
R A 2nd handset cannot join an outside call
that is being recorded (page 20).
(KX-TG8561 series: page 3)
R To prevent other users from joining your
conversations with outside callers, turn the
privacy mode on (page 31).
Key lock
The handset can be locked so that no calls or
settings can be made. Incoming calls can be
answered, but all other functions are disabled
while key lock is on.
To turn key lock on, press for about 3
seconds.
R
is displayed.
R To turn key lock off, press
for about 3
seconds.
Note:
R Calls to emergency numbers cannot be
made until key lock is turned off.
Power back-up operation
When a power failure occurs, the charged
handset temporarily supplies power to the
base unit (power back-up mode). This allows
you to make and receive calls using a handset
during a power failure. The base unit will not
perform any other functions. You can program
“Power Failure” and the default setting is
“Auto” (page 32).
Important:
R If a handset is not placed on the base unit
when a power failure occurs, “Base no
power Press e” is displayed. After
pressing M
N on the handset, place it
on the base unit to start power back-up
mode.
20
Making/Answering Calls
