Important:
R When the unit receives a call from a
number that is stored in the call barred list,
the call is logged in the caller list
(page 35) with
after the call is
disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in the
call barred list.
Important:
R You must store the phone number with an
area code in the call barred list.
n From the caller list:
1 MFN (
)
2 MbN: Select the entry to be barred. a
a
3 MbN: “Caller Barred” a
4 MbN: “Yes” a a M N
n By entering phone numbers:
1
(middle soft key) #217 a
2 Enter the phone number (24 digits
max.). a
R To erase a digit, press .
3 M
N
Viewing/editing/erasing bar call
numbers
1
(middle soft key) #217
2 MbN: Select the desired entry.
R To exit, press M N.
3 To edit a number:
a Edit the phone number. a
a M N
To erase a number:
a MbN: “Yes” a a M N
Note:
R When editing, press the desired dial key to
add,
to erase.
Storing an area code to be
deleted automatically
In some situations, phone numbers stored
automatically in the caller list (page 35) will
include area codes. If you do not want to dial
the area code when making calls from the
caller list, you can store the area code which
you want the unit to delete automatically.
Example: You have stored the area code
“123”. If you make a call from the caller list to
the phone number “123-456-7890”, the unit
dials “456-7890”.
1
(middle soft key) #255
2 Enter an area code (5 digits max.). a
a M N
Setting call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1
(middle soft key) #256
2 Enter the base unit PIN (default: “0000”).
R If you forget your PIN, contact an
authorised service centre.
3 Select the handsets to be restricted by
pressing 1 to 6.
R All handsets registered to the base unit
are displayed.
R “
” is displayed next to the selected
handset numbers.
R To cancel a selected handset, press
the same dial key again. “
”
disappears.
4
5 Select a memory location by pressing 1
to 6. a
6 Enter the phone number or area code to
be restricted (8 digits max.). a
a
M
N
R To erase a restricted number, press
.
31
Programming
