R When the unit is turned on, the
indicator and indicator light amber
for about 2 seconds.
2 Confirm that the
indicator and
indicator light green. (The unit is ready
for use.)
R If the indicators do not light green,
re-position the unit in a place where
the indicators light green.
Note:
R The AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected.
R The unit can support a maximum of 3
handsets at a time.
Setting the repeater mode
This repeater is pre-registered to the base unit
and the default setting of repeater mode is
“On”. You do not need to change this setting
for initial use.
1 (middle soft key) #138
2 MbN: Select the desired setting. a
a M N
Note:
R After turning the repeater mode on or off,
is displayed on the handset
momentarily. This is normal and the
handset can be used once
is displayed.
Wall mounting
Note:
R Make sure that the wall is strong enough to
support the weight of the unit.
