511010
92
Verklein
Vergroot
Pagina terug
1/100
Pagina verder
Operating Instructions
Model shown is KX-TG7622.
Link-to-Cell Cellular Convergence Solution
Model No. KX-TG7622
KX-TG7623
KX-TG7624
KX-TG7642
KX-TG7643
KX-TG7644
KX-TG7645
Before initial use, see “Getting
Started” on page 10.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save
them for future reference.
Consulte “Guía Rápida Española”, página 82.
This unit is compatible with Caller ID. You must subscribe to the appropriate
service offered by your service provider/telephone company.
For assistance, visit our Web site: http://www.panasonic.com/help for
customers in the U.S.A. or Puerto Rico.
Please register your product: http://www.panasonic.com/prodreg
Introduction
Model composition ..............................3
Accessory information .........................4
Important Information
For your safety ....................................7
Important safety instructions ...............8
For best performance ..........................8
Other information ................................9
Specifications ......................................9
Getting Started
Setting up ..........................................10
Note when setting up ........................12
Intelligent eco mode ..........................12
Controls .............................................13
Initial settings ....................................17
Link to Cell
Link to cell feature .............................19
Registering a cellular phone .............19
Link to cell settings ............................20
Making/Answering Calls
Using the Handset
Making cellular calls ..........................24
Making landline calls .........................24
Answering calls .................................25
Useful features during a call .............25
Power back-up operation ..................28
Making/Answering Calls
Using the Base Unit
Making cellular calls ..........................31
Making landline calls .........................31
Answering calls .................................32
Useful features during a call .............32
Shared Phonebook
Shared phonebook ............................35
Programming
Programmable settings .....................39
Special programming ........................46
Registering a unit ..............................48
Caller ID Service
Using Caller ID service ......................
49
Caller list ...........................................50
Using Bluetooth Devices
Copying phonebook from a cellular
phone (phonebook transfer) ..............54
Using a Bluetooth wireless headset
(optional) for landline calls ................55
Answering System for
Landline
Answering system for landline ..........57
Turning the answering system on/
off ......................................................57
Greeting message .............................58
Listening to messages using the base
unit ....................................................58
Listening to messages using the
handset .............................................59
Voice memo ......................................60
Remote operation .............................60
Answering system settings ...............62
Voice Mail Service for
Landline
Voice mail service for landline ..........64
Intercom/Locator
Intercom ............................................66
Handset locator .................................66
Transferring calls, conference
calls ...................................................67
Useful Information
Wall mounting ...................................68
Error messages .................................71
Troubleshooting ................................72
FCC and other information ................80
Guía Rápida Española
Guía Rápida Española ......................82
Appendix
Customer services ............................94
Warranty (For United States and Puerto
Rico) ..................................................95
Index
Index..................................................97
2
Table of Contents
Model composition
n K
X-TG7621 series
n K
X-TG7641 series
R M
odel shown is KX-TG7622. R Model shown is KX-TG7642.
Series Model No.
Base unit Handset
Part No. Part No. Quantity
KX-TG7621 series KX-TG7622 KX-TG7621 KX-TGA410 2
KX-TG7623 KX-TG7621 KX-TGA410 3
KX-TG7624 KX-TG7621 KX-TGA410 4
KX-TG7641 series KX-TG7642 KX-TG7641 KX-TGA660 2
KX-TG7643 KX-TG7641 KX-TGA660 3
KX-TG7644 KX-TG7641 KX-TGA660 4
KX-TG7645 KX-TG7641 KX-TGA660 5
Feature differences
Series
Power back-up
mode during power
failure
Call using
b
ase unit
*1
Base unit
d
isplay
*2
Intercom
«
*3
KX-TG7621
s
eries
KX-TG7641
s
eries
*1 A call can be made or answered with the base unit.
*
2 Base unit display shows date and time, phonebook entries, caller information,
and messages recorded on the answering system.
*3 Intercom calls can be made between the base unit and handset.
For assistance, please visit http://www.panasonic.com/help
3
Introduction
Accessory information
Supplied accessories
No.
Accessory item/
O
rder number
Quantity
KX-TG7622
K
X-TG7642
KX-TG7623
K
X-TG7643
KX-TG7624
K
X-TG7644
KX-TG7645
A AC adaptor/
P
NLV226Z
2 3 4 5
B Telephone line
c
ord/
PQJA10075Z
1 1 1 1
C Rechargeable
b
atteries/
HHR-4DPA
4 6 8 10
D
Handset c
over
*1, *2
2 3 4 5
E Belt clip/
P
NKE1098Z2
(–)
*
3
/2 (–)
*3
/3 (–)
*3
/4
5
F
Charger
*
4
1 2 3 4
G Wall mounting
a
daptor/
PQKL10088Z1
1/(–)
*
5
1/(–)
*5
1/(–)
*5
*1 The handset cover comes attached to the handset.
*
2 KX-TG7621 series: page 3
PNYNTGA410BR: Black
KX-TG7641 series: page 3
PNYNTGA660MR: Metallic gray
*3 The belt clip is not supplied with KX-TG7621 series (page 3).
*4 KX-TG7621 series: page 3
PNLC1018ZB: Black
KX-TG7641 series: page 3
PNLC1017ZM: Metallic gray
*5 The wall mounting adaptor is not supplied with KX-TG7641 series (page 3).
A
B C D E F G
4
For assistance, please visit http://www.panasonic.com/help
Introduction
Additional/replacement accessories
P
lease contact your nearest Panasonic dealer for sales information (page 94).
Accessory item Order number
Rechargeable
b
atteries
HHR-4DPA
*
1
R To order, please call 1-800-332-5368 or visit
http://www.panasonic.com/batterystore
Battery type:
Nickel metal hydride (Ni-MH)
2 x AAA (R03) size for each handset
Headset KX-TCA60, KX-TCA93, KX-TCA94, KX-TCA400, KX-TCA430
T-adaptor KX-J66
Range extender
KX-TGA405
*
2
*1 Replacement batteries may have a different capacity from that of the supplied
b
atteries.
*2 By installing this unit, you can extend the range of your phone system to include
areas where reception was previously not available. This product can be
purchased online. Please visit our Web site:
http://www.panasonic.com/RangeExtender
Expanding your phone system
Optional handset feature overview
Y
ou can expand your phone system by registering optional handsets (6 max.) to a
single base unit.
R Optional handsets may be a different color from that of the supplied handsets.
Feature KX-TGA410 KX-TGA660
Handset
Power back-up mode during power
f
ailure
*1
*1 During a power failure, this feature allows you to make or receive calls by
t
emporarily powering the unit with a charged handset placed on the base unit if
both the base unit and handset have the power back-up mode.
For assistance, please visit http://www.panasonic.com/help
5
Introduction
Bluetooth
®
devices
You can expand your phone system by registering the following units to a single
base unit.
Your Bluetooth cellular phone
*
1
: 2 max.
(for cellular calls: page 19)
Your Bluetooth headset
*
1
: 1 max.
(for a wireless hands-free conversation: page 55)
*1 Your cellular phone and headset must be Bluetooth wireless technology
c
ompatible. For more details and the list of compatible cellular phones, please
visit our Web site: http://www.panasonic.com/link2cell
6
For assistance, please visit http://www.panasonic.com/help
Introduction
For your safety
T
o prevent severe injury and loss of life/
property, read this section carefully before
using the product to ensure proper and safe
operation of your product.
WARNING
Power connection
R U
se only the power source marked on the
product.
R Do not overload power outlets and
extension cords. This can result in the risk
of fire or electric shock.
R Completely insert the AC adaptor/power
plug into the power outlet. Failure to do so
may cause electric shock and/or excessive
heat resulting in a fire.
R Regularly remove any dust, etc. from the
AC adaptor/power plug by pulling it from
the power outlet, then wiping with a dry
cloth. Accumulated dust may cause an
insulation defect from moisture, etc.
resulting in a fire.
R Unplug the product from power outlets if it
emits smoke, an abnormal smell, or makes
an unusual noise. These conditions can
cause fire or electric shock. Confirm that
smoke has stopped emitting and contact
the Panasonic Call Center at
1-800-211-PANA (1-800-211-7262).
R Unplug from power outlets and never touch
the inside of the product if its casing has
been broken open.
R Never touch the plug with wet hands.
Danger of electric shock exists.
Installation
R T
o prevent the risk of fire or electrical
shock, do not expose the product to rain or
any type of moisture.
R Do not place or use this product near
automatically controlled devices such as
automatic doors and fire alarms. Radio
waves emitted from this product may cause
such devices to malfunction resulting in an
accident.
R Do not allow the AC adaptor or telephone
line cord to be excessively pulled, bent or
placed under heavy objects.
Operating safeguards
R U
nplug the product from power outlets
before cleaning. Do not use liquid or
aerosol cleaners.
R Do not disassemble the product.
R Do not spill liquids (detergents, cleansers,
etc.) onto the telephone line cord plug, or
allow it to become wet at all. This may
cause a fire. If the telephone line cord plug
becomes wet, immediately pull it from the
telephone wall jack, and do not use.
Medical
R C
onsult the manufacturer of any personal
medical devices, such as pacemakers or
hearing aids, to determine if they are
adequately shielded from external RF
(radio frequency) energy. (The product
operates in the frequency range of 1.92
GHz to 1.93 GHz, and the RF transmission
power is 115 mW (max.).)
R Do not use the product in health care
facilities if any regulations posted in the
area instruct you not to do so. Hospitals or
health care facilities may be using
equipment that could be sensitive to
external RF energy.
CAUTION
Installation and location
R N
ever install telephone wiring during an
electrical storm.
R Never install telephone line jacks in wet
locations unless the jack is specifically
designed for wet locations.
R Never touch uninsulated telephone wires or
terminals unless the telephone line has
been disconnected at the network interface.
R Use caution when installing or modifying
telephone lines.
R The AC adaptor is used as the main
disconnect device. Ensure that the AC
outlet is installed near the product and is
easily accessible.
R This product is unable to make calls when:
the handset batteries need recharging or
have failed.
there is a power failure.
Battery
R W
e recommend using the batteries noted
on page 5. USE ONLY rechargeable
Ni-MH batteries AAA (R03) size.
R Do not mix old and new batteries.
For assistance, please visit http://www.panasonic.com/help
7
Important Information
R D
o not open or mutilate the batteries.
Released electrolyte from the batteries is
corrosive and may cause burns or injury to
the eyes or skin. The electrolyte is toxic and
may be harmful if swallowed.
R Exercise care when handling the batteries.
Do not allow conductive materials such as
rings, bracelets, or keys to touch the
batteries, otherwise a short circuit may
cause the batteries and/or the conductive
material to overheat and cause burns.
R Charge the batteries provided with or
identified for use with this product only, in
accordance with the instructions and
limitations specified in this manual.
R Only use a compatible base unit (or
charger) to charge the batteries. Do not
tamper with the base unit (or charger).
Failure to follow these instructions may
cause the batteries to swell or explode.
Attention:
A nickel metal hydride battery that is
recyclable powers the product you have
purchased.
Please call 1-800-8-BATTERY
(1-800-822-8837) for information on how to
recycle this battery.
Important safety
i
nstructions
When using your product, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1. Do not use this product near water for
example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet
basement or near a swimming pool.
2. Avoid using a telephone (other than a
cordless type) during an electrical storm.
There may be a remote risk of electric
shock from lightning.
3. Do not use the telephone to report a gas
leak in the vicinity of the leak.
4. Use only the power cord and batteries
i
ndicated in this manual. Do not dispose of
batteries in a fire. They may explode.
Check with local codes for possible special
disposal instructions.
SAVE THESE INSTRUCTIONS
For best performance
Base unit location/avoiding noise
T
he base unit and other compatible Panasonic
units use radio waves to communicate with
each other.
R For maximum coverage and noise-free
communications, place your base unit:
at a convenient, high, and central
location with no obstructions between
the handset and base unit in an indoor
environment.
away from electronic appliances such as
TVs, radios, personal computers,
wireless devices, or other phones.
facing away from radio frequency
transmitters, such as external antennas
of mobile phone cell stations. (Avoid
putting the base unit on a bay window or
near a window.)
R Coverage and voice quality depends on the
local environmental conditions.
R If the reception for a base unit location is
not satisfactory, move the base unit to
another location for better reception.
Environment
R K
eep the product away from electrical noise
generating devices, such as fluorescent
lamps and motors.
R The product should be kept free from
excessive smoke, dust, high temperature,
and vibration.
R The product should not be exposed to
direct sunlight.
R Do not place heavy objects on top of the
product.
R When you leave the product unused for a
long period of time, unplug the product from
the power outlet.
R The product should be kept away from heat
sources such as heaters, kitchen stoves,
etc. It should not be placed in rooms where
the temperature is less than 0 °C (32 °F) or
greater than 40 °C (104 °F). Damp
basements should also be avoided.
R The maximum calling distance may be
shortened when the product is used in the
8
For assistance, please visit http://www.panasonic.com/help
Important Information
following places: Near obstacles such as
h
ills, tunnels, underground, near metal
objects such as wire fences, etc.
R Operating the product near electrical
appliances may cause interference. Move
away from the electrical appliances.
Routine care
R W
ipe the outer surface of the product
with a soft moist cloth.
R Do not use benzine, thinner, or any
abrasive powder.
Other information
CAUTION: Risk of explosion if battery is
replaced by an incorrect type. Dispose of used
batteries according to the instructions.
Notice for product disposal, transfer, or
r
eturn
R This product can store your private/
confidential information. To protect your
privacy/confidentiality, we recommend that
you erase information such as phonebook
or caller list entries from the memory before
you dispose of, transfer, or return the
product.
Notice
ENERGY STAR
A
s an ENERGY STAR
®
Partner, Panasonic
has determined that this product meets the
ENERGY STAR guidelines for energy
efficiency. ENERGY STAR is a U.S.
registered mark.
Specifications
n S
tandard:
DECT 6.0 (Digital EnhancedCordless
Telecommunications 6.0)
Bluetooth wireless technology 2.0
n Frequency range:
1.92 GHz to 1.93 GHz (DECT)
2.402 GHz to 2.48 GHz (Bluetooth)
n RF transmission power:
115 mW (max.)
n Power source:
120 V AC, 60 Hz
n Power consumption:
Base unit:
Standby: Approx. 1.5 W
Maximum: Approx. 4.8 W
Charger:
Standby: Approx. 0.1 W
Maximum: Approx. 2.0 W
n Operating conditions:
0 °C – 40 °C (32 °F – 104 °F), 20 % –
80 % relative air humidity (dry)
Note:
R Design and specifications are subject to
change without notice.
R The illustrations in these instructions may
vary slightly from the actual product.
For assistance, please visit http://www.panasonic.com/help
9
Important Information
Setting up
Connections
R U
se only the supplied Panasonic AC
adaptor PNLV226.
R If you do not connect the telephone
line cord and use only cellular lines,
set the cellular line only mode to use
this unit more conveniently
(page 21).
Base unit (KX-TG7621 series: page 3)
DSL/ADSL filter*
Hook
Hooks
“Click”
Press plug
firmly.
(120 V AC, 60 Hz)
To single-line
telephone jack
(RJ11C)
“Click”
Correct Wrong
*DSL/ADSL filter (not supplied) is
r
equired if you have DSL/ADSL service.
Base unit (KX-TG7641 series: page 3)
DSL/ADSL filter*
“Click”
Press plug firmly.
(120 V AC, 60 Hz)
To single-line
telephone jack
(RJ11C)
“Click”
Correct Wrong
Hooks
*DSL/ADSL filter (not supplied) is
required if you have DSL/ADSL service.
Charger
(120 V AC, 60 Hz)
Hooks
10
For assistance, please visit http://www.panasonic.com/help
Getting Started
Battery installation
R U
SE ONLY Ni-MH batteries AAA
(R03) size.
R Do NOT use Alkaline/Manganese/
Ni-Cd batteries.
R Confirm correct polarities (
, ).
Rechargeable Ni-MH ONLY
R W
hen the date and time setting is
displayed, see page 17.
Battery charging
C
harge for about 7 hours.
R When the batteries are fully charged,
the charge indicator goes off and
Fully charged is displayed.
KX-TG7621 series (page 3)
Confirm "Charging" is displayed.
Charge indicator
KX-TG7641 series (page 3)
Charge indicator
OR
Confirm "Charging" is displayed.
For assistance, please visit http://www.panasonic.com/help
11
Getting Started
Note when setting up
Note for connections
R T
he AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
R The AC adaptor should be connected
to a vertically oriented or
floor-mounted AC outlet. Do not
connect the AC adaptor to a
ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to
become disconnected.
During a power failure
W
e recommend connecting a
corded-type telephone (without AC
adaptor) to the same telephone line or to
the same telephone line jack using a
Panasonic T-adaptor (page 5).
Note for battery installation
R U
se the supplied rechargeable
batteries. For replacement, we
recommend using the Panasonic
rechargeable batteries noted on
page 5, 7.
R Wipe the battery ends (
, ) with a
d
ry cloth.
R Avoid touching the battery ends (
,
) or the unit contacts.
Note for battery charging
R I
t is normal for the handset to feel
warm during charging.
R Clean the charge contacts of the
handset, base unit, and charger with a
soft and dry cloth once a month.
Clean more often if the unit is
exposed to grease, dust, or high
humidity.
Battery level
Icon Battery level
High
Medium
Low
Needs charging.
Empty
Panasonic Ni-MH battery
p
erformance (supplied batteries)
Operation Operating time
In continuous use
13 hours max.
*
1
Not in use
(
standby)
11 days max.
*
1
*1 If Eco mode is on.
N
ote:
R Actual battery performance depends
on usage and ambient environment.
R Even after the batteries are fully
charged, the handset can be left on
the base unit or charger without any ill
effect on the batteries.
R The battery level may not be
displayed correctly after you replace
the batteries. In this case, place the
handset on the base unit or charger
and let it charge for at least 7 hours.
Intelligent eco mode
T
his feature automatically reduces
handset power consumption by
suppressing handset transmission
power when the handset is close to the
base unit.
R When this feature is activated,
is
d
isplayed. However, during a cellular
call,
is not displayed even though
t
his feature is activated.
12
For assistance, please visit http://www.panasonic.com/help
Getting Started
R E
co mode is turned off when the
clarity booster is activated (page 26).
Controls
Handset
n
KX-TG7621 series (page 3)
B C
M
A
G
D
E
J
K
I
H
L
A
B
n
KX-TG7641 series (page 3)
Charge indicator
R
inger indicator
Message indicator
Nonslip pad
R N
onslip pad offers support when
you cradle the handset between
your shoulder and ear.
Speaker
M N
(TALK)
M N
(SP-PHONE: Speakerphone)
Headset jack
Dial keypad (*:
TONE)
Receiver
Display
MO
FFN
MF
LASHN MCALL WAITN
For assistance, please visit http://www.panasonic.com/help
13
Getting Started
Microphone
Charge contacts
n C
ontrol type
Soft keys
T
he handset features 3 soft keys. By
pressing a soft key, you can select
the feature shown directly above it on
the display.
Navigator key
MDN,
MCN, MFN, or MEN: Scroll
through various lists and items.
VOL. (Volume: MDN
or MCN):
Adjust the receiver or speaker
volume while talking.
MFN CID (Caller ID): View the
caller list.
MEN REDIAL: View the redial list.
Base unit
n
KX-TG7621 series (page 3)
A CB E FD
G H I LJ K
Charge contacts
HEADSET indicator
Speaker
Message counter
CELL 1 indicator
CELL 2 indicator
ME
RASEN
MnN
(STOP)
MjN/M
kN (Volume up/down)
M
N/M N
(Repeat/Skip)
M N
(PLAY)
Message indicator
ML
OCATORN
MA
NSWER ON/OFFN
ANSWER ON/OFF indicator
n KX-TG7641 series (page 3)
L MN O PQ S T UR
AB
A
E
F
J
I
K
D
C
G
H
Charge contacts
Speaker
Display
MH
EADSETN
HEADSET indicator
ME
RASEN MCLEARN
MnN
(STOP) (EXIT)
MC
ELL 1N
CELL 1 indicator
MC
ELL 2N
CELL 2 indicator
MA
NSWER ON/OFFN
ANSWER ON/OFF indicator
14
For assistance, please visit http://www.panasonic.com/help
Getting Started
M N
(PLAY)
Message indicator
ML
OCATORN MINTERCOMN
MF
LASHN MCALL WAITN
MM
EMON
MC
ONFN (Conference)
M N
(Phonebook)
Dial keypad (*: TONE)
Microphone
MSP-PHONEN (Speakerphone)
SP-PHONE indicator
MM
UTEN MDISPLAYN
MH
OLDN MEDITN
Bracket
*
1
*1 The base unit has an unremovable
bracket for desk or wall mounting.
To mount on a wall, see page 69.
n Control type
Navigator key
MDN,
MCN, M
N,
or M
N:
Scroll
through various lists and items.
MDN or MCN (Volume): Adjust the
speaker volume while talking.
M
N
CID (Caller ID): View the
caller list.
M
N
REDIAL: View the redial list.
M
N/M N:
Repeat/skip messages
during playback.
Belt clip
Available for:
K
X-TG7641 series (page 3)
n T
o attach n To remove
Display/Indicators
Handset display items
Item Meaning
Within base unit range
Out of base unit range
The landline is in use.
R W
hen flashing:
The call is put on hold.
R When flashing rapidly:
An incoming call is now
being received.
A cellular line is in use.
R W
hen flashing:
The cellular call is put on
hold.
R When flashing rapidly:
A cellular call is being
received.
1
A cellular phone is
c
onnected.
*1
Ready to
make/receive cellular calls.
R When turned off:
A cellular phone is not
connected to the base
unit (page 21).
The cellular line is
s
elected for the ringer
setting.
A cellular call is being
received on that line.
Eco mode is on.
*
2
(page 12)
Equalizer is set.
(
page 27)
Speakerphone is on.
(
page 24)
Ringer volume is off.
*
3
(page 41, 43)
Silent mode is on.
(
page 46)
For assistance, please visit http://www.panasonic.com/help
15
Getting Started
Item Meaning
Call sharing mode is off.
(
page 44)
Alarm is on. (page 46)
Handset number
Battery level
Blocked call (page 47)
Clarity booster is on.
*
2
(page 26)
In use
Answering system is being
u
sed by another handset
or the base unit.
Cell1
i
n use
Someone is using the
c
ellular line.
Cell2
i
n use
Line
i
n use
Someone is using the
l
andline.
*1 Corresponding cellular line(s) is
i
ndicated next to the item.
*2 During a cellular call, the item is not
displayed even though the feature is
activated.
*3 Corresponding lines (1, 2: cellular
line, L: landline) are indicated next to
the item. If all lines are turned off, no
line is indicated.
Base unit display item
n
KX-TG7621 series: page 3
Item Meaning
Answering system
a
nswers calls with a
greeting message and
caller messages are not
recorded. (“Selecting
Greeting only ”,
page 62)
n
KX-TG7641 series: page 3
Item Meaning
Ringer volume is off.
*
1
(page 32)
Call sharing mode is off.
(
page 44)
In use
Answering system is being
u
sed by a handset.
Line &
C
ell1
in use
Someone is using the land
l
ine and cellular line.
Line &
C
ell2
in use
Cell1
i
n use
Someone is using the
c
ellular line.
Cell2
i
n use
Line
i
n use
Someone is using the line.
Answering system
a
nswers calls with a
greeting message and
caller messages are not
recorded. (“Selecting
Greeting only ”,
page 62)
*1 Corresponding lines (1, 2: cellular
l
ine, L: landline) are indicated next to
the item. If all lines are turned off, no
line is indicated.
16
For assistance, please visit http://www.panasonic.com/help
Getting Started
CELL 1/CELL 2 indicators on the
b
ase unit
The CELL 1/CELL 2 indicators show
each cellular line status.
Status Meaning
Green
(
On)
A cellular phone is
connected. Ready to
make/receive cellular calls.
Green
(
Flashing)
The cellular line is in
use.
Phonebook entries are
being copied from a
cellular phone
(page 54).
Green
(
Flashing
rapidly)
A cellular call is being
received.
Amber
(
On)
A cellular phone is not
connected to the base unit
(page 21).
Amber
(
Flashing
rapidly)
The base unit is searching
for the registered cellular
phone.
Red
(
Flashing)
The base unit is
registering a cellular
phone.
A cellular call is put on
hold.
Light off A cellular phone is not
r
egistered to the base unit.
HEADSET indicator on the base unit
T
he HEADSET indicator shows the
Bluetooth headset status.
Status Meaning
Green
(
On)
A Bluetooth headset is
connected to the base
unit. Ready to use it.
Green
(
Flashing)
A Bluetooth headset is in
use.
Status Meaning
Green
(
Flashing
rapidly)
A landline call is being
received.
Amber
(
On)
The Bluetooth headset is
not connected to the base
unit.
Amber
(
Flashing
rapidly)
The base unit is searching
for the registered
Bluetooth headset.
Red
(
Flashing)
The base unit is
registering a headset.
Mute is turned on.
Light off A Bluetooth headset is not
r
egistered to the base unit.
Initial settings
n D
irect command code:
Programmable settings can be
accessed by pressing MMENUN, #
and then the corresponding code on
the dial keypad (page 39).
Example: Press MMENUN#101.
n Symbol meaning:
Symbol Meaning
Perform with the
h
andset.
Perform with the base
u
nit.
Example:
MbN:
Off
Press MCN or MDN to
select the words in
quotations.
Date and time
I
mportant:
R When you install the batteries for the
first time, the handset may prompt
you to set date and time. First press
MSELECTN, then proceed to step 2.
For assistance, please visit http://www.panasonic.com/help
17
Getting Started
1 MM
ENUN#101
2 Enter the current month, date, and
year by selecting 2 digits for each.
Example: July 15, 2011
07 15 11
3 MOKN
4 Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30
09 30
5 MAM/PMN: Select AM or PM.
6 MSAVEN a MOFFN
Note:
R When English is selected as the
display language, 12-hour clock
format is used. When Spanish is
selected, 24-hour clock format is used.
R The date and time may be incorrect
after a power failure. In this case, set
the date and time again.
Display language
Y
ou can select either English or
Español as the display language.
The default setting is English.
Handset
1 MM
ENUN#110
2 MbN: Select the desired setting. a
MSAVEN
3 MOFFN
Base unit
*
1
*1 KX-TG7641 series: page 3
1 MDISPLAYN
2 MbN: Change language a M
N
3 MbN:
Select the desired setting. a
M
N
Voice guidance language
Y
ou can select either English or
Español as the voice guidance
language of the answering system. The
default setting is English.
1 MMENUN#112
2 MbN: Select the desired setting. a
MSAVEN
3 MOFFN
Dialing mode
If you cannot make calls, change this
setting according to your telephone line
service. The default setting is Tone.
Tone: For tone dial service.
Pulse: For rotary/pulse dial service.
1 MMENUN#120
2 MbN: Select the desired setting.
3 MSAVEN a MOFFN
18
For assistance, please visit http://www.panasonic.com/help
Getting Started
Link to cell feature
T
o use this feature, you must first
register and connect your cellular
phones to the base unit (page 19).
Your cellular phones must be Bluetooth
wireless technology compatible with this
product.
This feature allows you to:
make or answer cellular calls using
your home phone (handset or base
unit) with better reception.
maximize the benefits of cellular
services (such as free night and
weekend calls, or cellular to cellular
call plans) by utilizing unused peak
minutes with your home phone.
conserve the battery power of your
cellular phone while the unit is on a
cellular call. (We recommend
charging your cellular phone during
the cellular call as your cellular phone
battery is being consumed.)
Important:
R Up to 2 cellular phones can be
registered. However, only one
Bluetooth device (cellular phone or
headset) can be connected to the
base unit at a time.
R Locate your cellular phone near the
base unit. If the cellular phone is too
close to the base unit during a cellular
call, you may hear noise. For best
performance, we recommend placing
the cellular phone between 0.6 m to 3
m (2 feet to 10 feet) away from the
base unit.
Trademarks
R The Bluetooth
®
word mark and logos
are owned by the Bluetooth SIG, Inc.
and any use of such marks by
Panasonic Corporation is under
license. All other trademarks identified
herein are the property of their
respective owners.
Registering a cellular
p
hone
Important:
R For more details and the list of
compatible cellular phones, please
visit our Web site:
http://www.panasonic.com/link2cell
R Before registering a Bluetooth
enabled cellular phone to the base
unit:
we recommend you change the
PIN (page 22).
make sure that no Bluetooth device
such as a Bluetooth headset is
connected to your cellular phone.
1 Handset:
MMENUN
For CELL 1: #6241
For CELL 2: #6242
R After the CELL 1 or CELL 2
indicator on the base unit starts
flashing red, the rest of the
procedure must be completed
within 5 minutes.
2 Your cellular phone:
While the CELL 1 or CELL 2
indicator is flashing red, follow the
instructions of your cellular phone to
enter the registration mode.
R Depending on your cellular
phone, it may ask you to enter the
base unit PIN (default: 0000).
3 Handset:
Wait until a long beep sounds.
R It may take more than 10 seconds
to complete registration.
R When the CELL 1 or CELL 2
indicator lights green, the cellular
phone is connected to the base
unit. You are ready to make
cellular calls.
4 To select which unit receives calls
for the cellular line, press MOKN then
continue from step 3, “Selecting
For assistance, please visit http://www.panasonic.com/help
19
Link to Cell
which unit receives cellular calls”,
p
age 20.
R If not required, go to step 5.
5 MOFFN
Note:
R Make sure that your cellular phone is
set to connect to this product
automatically. Refer to your cellular
phone’s operating instructions.
R Make sure you cancel your cellular
phone’s current registration if you
want to register it to the other line
(page 23).
Link to cell settings
Selecting which unit receives
c
ellular calls
You can select which unit rings and
receives calls for a cellular line. When
All is selected, all handsets and the
base unit ring.
1 MMENUN
2 For CELL 1: #6271
For CELL 2: #6272
3 MbN: Select the desired handset or
All.
4 MSAVEN a MOFFN
Note:
R When you select a specific handset to
receive calls for a cellular line:
other handsets cannot answer the
calls.
the base unit can answer the calls
even though it does not ring.
However, you can make the base
unit ring by adjusting the base unit
ringer volume (page 41).
(KX-TG7641 series: page 3)
R When you change the setting to
All, the base unit ringer volume
also returns to the lowest level even if
t
he ringer volume has been changed.
Ring as cell mode
O
nce this feature is turned on, the
handset and base unit ring using the
same ringer tone as your cellular phone.
The following settings are available:
Off: Turn this feature off to use the
ringer tones of the handset and base
unit. Caller information is announced
depending on the Talking Caller ID
setting (page 43).
On (with Talking CID)
(default): The handset and base unit
use your cellular phone’s ringer tone.
Caller information is announced even
if the Talking Caller ID is turned off.
On (without Talking CID):
The handset and base unit use your
cellular phone’s ringer tone. Caller
information is not announced even if
the Talking Caller ID is turned on.
Important:
R To use this feature, your cellular
phone must support Bluetooth in-band
ringtone. Refer to your cellular
phone’s operating instructions.
1 MMENUN
2 For CELL 1: #6141
For CELL 2: #6142
3 MbN: Select the desired setting.
4 MSAVEN a MOFFN
Note:
R The units use the preset ringer tones
(page 43) instead of your cellular
phone’s ringer tone when a cellular
call is being received if:
your cellular phone is in silent mode
(depending on your cellular phone).
the base unit is in use.
2 handsets are sharing a landline
call.
20
For assistance, please visit http://www.panasonic.com/help
Link to Cell
R I
f your cellular phone is in silent mode
with On (with Talking CID)
set, the unit announces caller
information even when Talking Caller
ID is turned off (page 43).
To use the handset ringer tone
i
nstead of your cellular phone’s
ringer tone
Select Off in step 3, “Ring as cell
mode”, page 20.
To change the handset ringer tone for a
cellular line, see page 41.
Auto connection to the
c
ellular phone
After registration, your cellular phone is
connected to the base unit. If you move
the cellular phone out of base unit
range, the cellular phone is
disconnected from the base unit. This
feature allows the base unit to try to
reconnect the cellular phone at regular
intervals when it returns within base unit
range. You can set the interval. The
default setting is 1 min.
Important:
R When you are using a cellular line or
a Bluetooth headset, the base unit
loses its connection from other
Bluetooth devices (cellular phone or
headset). To automatically resume
the connection to cellular phones,
leave the auto connection on.
R Some cellular phones lose connection
after usage, please check the
specification of your cellular phone for
more details.
1 MMENUN#632
2 MbN: Select the desired setting.
3 MSAVEN a MOFFN
Note:
R S
ome cellular phone may ask you if
you accept the connection
requirement from the base unit. In that
case, select Off in step 2. Check
the specification of your cellular
phone.
Connecting/disconnecting the
cellular phone manually
When you make or answer calls with
your cellular phone, we recommend
disconnecting it from the base unit,
otherwise received audio may not be
heard on your cellular phone.
You can also manually reconnect the
cellular phone to the base unit without
waiting for the auto connection feature to
resume the connection.
1 MMENUN
2 To connect/disconnect:
For CELL 1: #6251
For CELL 2: #6252
R A long beep sounds.
3 MOFFN
Cellular line only mode (If you
d
o not use the landline)
If you do not use the landline, we
recommend setting the unit to the
cellular line only mode.
1 MMENUN#157
2 To turn on:
MbN: On a MSELECTN a
MbN: Yes a MSELECTN
To turn off:
MbN: Off a MSELECTN
Note:
R Once you set this mode, you can use
the following buttons to make cellular
calls:
for the handset, press M
N
or M
N
i
nstead of MCELLN (page 24).
For assistance, please visit http://www.panasonic.com/help
21
Link to Cell
for the base unit, press
MS
P-PHONEN instead of the line
button (MCELL 1N or MCELL 2N) set
for the cellular line selection
(page 22, 31).
(KX-TG7641 series: page 3)
R Once you set this mode, the following
features cannot be used:
Landline features (page 45)
Answering system (page 57)
Messages cannot be received.
However, you can only record voice
memo messages (page 60).
Voice mail features (page 64)
R After this mode is turned on or off, the
base unit reboots.
Bluetooth connections from cellular
phones or headset are
disconnected. If the auto
connection is turned on (page 21),
the cellular phones are
reconnected.
will be displayed on the handset
m
omentarily. The handset can be
used once
is displayed.
When you use the landline again
B
efore connecting the telephone line to
the base unit, select Off in step 2,
“Cellular line only mode (If you do not
use the landline)”, page 21.
Cellular line selection
T
his feature determines which cellular
line is selected to make cellular calls
when:
you press MCELLN on the handset.
you press M
N
or M
N
on the
handset while the cellular line only
mode is turned on.
you press MSP-PHONEN on the base
unit while the cellular line only mode is
turned on. (KX-TG7641 series: page 3)
The following settings are available:
M
anual (handset only: default):
You can select the desired cellular
line when making a call.
“Cellular phone 1” (base unit default):
CELL 1 is selected.
“Cellular phone 2”: CELL 2 is selected.
1 MMENUN
2 For handset: #634
For base unit
*1
: #*634
3 MbN: Select the desired setting.
4 MSAVEN a MOFFN
*1 KX-TG7641 series: page 3
Storing your area code (for
d
ialing only a 7-digit phone
number to make a local call)
You need to add your area code when
making cellular calls to a phone number
in your area. Once you store your area
code, it is automatically added to the
beginning of the 7-digit phone number
when making cellular calls.
1 MMENUN#633
2 Enter the 3-digit area code.
R To correct a digit, press MCLEARN.
3 MSAVEN a MOFFN
Changing the Bluetooth PIN
(
Personal Identification
Number)
The PIN is used to register cellular
phones to the base unit. The default PIN
is 0000. To prevent unauthorized
access to this product, we recommend
that you change the PIN, and keep it
confidential.
Important:
R Please make note of your new PIN.
The unit does not reveal the PIN to
you. If you forget your PIN, see
page 79.
1 MMENUN#619
22
For assistance, please visit http://www.panasonic.com/help
Link to Cell
2 E
nter the new 4-digit PIN. a MOKN
3 Enter the new 4-digit PIN again. a
MSAVEN
4 MOFFN
Changing the PIN for the second time
F
ollow step 1, “Changing the Bluetooth
PIN (Personal Identification Number)”,
page 22. Enter the current 4-digit PIN,
then continue from step 2.
Deregistering Bluetooth
d
evices
A handset can cancel a registration of
another Bluetooth devices (cellular
phone or headset) that is stored to the
base unit.
1 MMENUN#134
2 MbN: Select the desired device. a
MSELECTN
R
indicates a cellular phone, and
indicates a headset.
3 MbN:
Yes a MSELECTN
R When the cellular phone is
deregistered, the CELL 1 or CELL
2 indicator is turned off.
R When the headset is
deregistered, the HEADSET
indicator is turned off.
4 MOFFN
For assistance, please visit http://www.panasonic.com/help
23
Link to Cell
Making cellular calls
I
mportant:
R Only 1 cellular line can be used at a
time.
R Before making calls, confirm that the
CELL 1 or CELL 2 indicator lights
green (page 17).
1 Lift the handset and dial the phone
number.
R To correct a digit, press MCLEARN.
2 MCELLN
R The unit starts dialing when:
only 1 cellular phone is
registered.
a specific line is set to make
cellular calls (page 22).
Go to step 4.
3 MbN: Select the desired cellular
phone. a MSELECTN
4 When you finish talking, press
MOFFN or place the handset on the
base unit or charger.
Note:
R To switch to the speaker, press M
N.
T
o switch back to the receiver, press
M
N/M N.
Adjusting the receiver or speaker
v
olume
Press M
N
or M
N
repeatedly while talking.
Making a cellular call using the redial
l
ist
The last 5 phone numbers dialed are
stored in the redial list (each 48 digits
max.).
1 MEN REDIAL
2 MbN: Select the desired phone
number.
3 MCELLN
R The unit starts dialing when:
only 1 cellular phone is
r
egistered.
a specific line is set to make
cellular calls (page 22).
4 MbN: Select the desired cellular
phone. a MSELECTN
Erasing a number in the redial list
1 M N
REDIAL
2 MbN: Select the desired phone
number. a MERASEN
3 MbN: Yes a MSELECTN
4 MOFFN
Making landline calls
1 Lift the handset and dial the phone
number.
R To correct a digit, press MCLEARN.
2 M N
3 W
hen you finish talking, press
MOFFN or place the handset on the
base unit or charger.
Using the speakerphone
1 Dial the phone number and press
M N.
R Speak alternately with the other
party.
2 When you finish talking, press
MOFFN.
Note:
R For best performance, use the
speakerphone in a quiet environment.
R To switch back to the receiver, press
M N/M N.
Making a call using the redial list
1 MEN
REDIAL
2 MbN: Select the desired phone
number.
3 M
N
24
For assistance, please visit http://www.panasonic.com/help
Making/Answering Calls Using the Handset
Pause (for PBX/long distance service
u
sers)
A pause is sometimes required when
making calls using a PBX or long
distance service. When storing a calling
card access number and/or PIN in the
phonebook, a pause is also needed
(page 38).
Example: If you need to dial the line
access number “9” when making outside
calls with a PBX:
1 9 a MPAUSEN
2 Dial the phone number. a M
N
N
ote:
R A 3.5 second pause is inserted each
time MPAUSEN is pressed. Repeat as
needed to create longer pauses.
Answering calls
W
hen a call is being received, the ringer
indicator flashes rapidly.
1 Lift the handset and press M
N or
M N when the unit rings.
R To answer a cellular call, you can
also press MCELLN.
R You can also answer the call by
pressing any dial key from 0 to
9, *, or #. (Any key answer
feature)
2 When you finish talking, press
MOFFN or place the handset on the
base unit or charger.
Auto talk
Y
ou can answer calls simply by lifting
the handset off the base unit or charger.
You do not need to press M
N.
To turn
this feature on, see page 44.
Adjusting the handset ringer volume
n W
hile the handset is ringing for an
incoming call:
Press MDN or MCN repeatedly to select
the desired volume.
n Programming the volume
beforehand:
1 To change the cellular line
ringer volume:
For CELL 1:
MMENUN#6281
For CELL 2:
MMENUN#6282
To change the landline ringer
volume:
MMENUN#160
2 MbN: Select the desired volume.
3 MSAVEN a MOFFN
Temporary handset ringer off
W
hile the handset is ringing for a call,
you can turn the ringer off temporarily by
pressing M
N.
Useful features during
a
call
Hold
T
his feature allows you to put an outside
call on hold.
1 Press MMENUN during an outside
call.
2 MbN: Hold a MSELECTN
3 To release hold on the cellular
line:
Press MCELLN.
R Another handset user can take
the call: MCELLN
*1
a MSELECTN
*1
The call is taken when:
only 1 cellular phone is
registered.
For assistance, please visit http://www.panasonic.com/help
25
Making/Answering Calls Using the Handset
the line is set to make
c
ellular calls (page 22).
R The base unit user can take the
call by pressing MCELL 1N or
MCELL 2N. (KX-TG7641 series:
page 3)
To release hold on the landline:
Press M
N.
R A
nother handset user can take
the call by pressing M
N.
R T
he base unit user can take the
call by pressing MSP-PHONEN.
(KX-TG7641 series: page 3)
Note:
R If a call is kept on hold for more than 9
minutes, an alarm tone starts to
sound and the ringer indicator flashes
rapidly. After 1 additional minute on
hold, the call is disconnected.
R If another phone is connected to the
same line, you can also take the call
by lifting its handset.
Mute
W
hile mute is turned on, you can hear
the other party, but the other party
cannot hear you.
1 Press MMUTEN during conversation.
R MMUTEN flashes.
2 To return to the conversation, press
MMUTEN again.
Note:
R MMUTEN is a soft key visible on the
handset display during a call.
Flash for landline calls
MF
LASHN allows you to use the special
features of your host PBX such as
transferring an extension call, or
accessing optional telephone services.
Note:
R To change the flash time, see
page 44.
For call waiting or Call
W
aiting Caller ID service users
To use call waiting or Call Waiting Caller
ID, you must first subscribe with your
service provider/telephone company.
This feature allows you to receive calls
while you are already talking on the
phone. If you receive a call while on the
phone, you will hear a call waiting tone.
If you subscribe to both Caller ID and
Call Waiting with Caller ID services,
the 2nd caller’s information is displayed
after you hear the call waiting tone on
the handset.
1 Press MCALL WAITN to answer the
2nd call.
2 To switch between calls, press
MCALL WAITN.
Note:
R Please contact your service provider/
telephone company for details and
availability of this service in your area.
Temporary tone dialing for
l
andline calls (for rotary/pulse
service users)
You can temporarily switch the dialing
mode to tone when you need to access
touch-tone services (for example,
answering services, telephone banking
services, etc.).
Press * (TONE) before entering
access numbers which require tone
dialing.
Handset clarity booster
T
his feature can improve sound clarity
when the handset is used in an area
where there may be interference. During
an outside call, this feature is turned on
automatically when necessary.
R When this feature is turned on,
is displayed. However, during a
26
For assistance, please visit http://www.panasonic.com/help
Making/Answering Calls Using the Handset
cellular call, is not displayed
e
ven though the feature is activated.
Handset equalizer
T
his feature clarifies the voice of the
person you are talking to, producing a
more natural-sounding voice that is
easier to hear and understand.
1 Press MMENUN while talking.
2 MbN: Equalizer a MSELECTN
3 MbN: Select the desired setting.
4 Press MOKN to exit.
Note:
R When this feature is activated,
is
d
isplayed while talking.
R Depending on the condition and
quality of your telephone line, this
feature may emphasize existing line
noise. If it becomes difficult to hear,
turn this feature off.
R This feature is not available while
using the speakerphone.
Call share
Y
ou can join an existing outside call.
n While another unit is on a cellular
call:
1 To join the conversation, press
MCELLN.
R You can join the conversation
when:
only 1 cellular phone is
registered.
the line is set to make
cellular calls (page 22).
2 MbN: Select the desired cellular
phone. a MSELECTN
n While another unit is on a landline
call:
To join the conversation, press M
N.
Note:
R A
maximum of 3 parties (including 1
outside party) can join a conversation
using 2 extensions. (3-way
conference)
R To prevent other users from joining
your conversations with outside
callers, turn call sharing mode off
(page 44).
Transferring a cellular call
b
etween the handset and a
cellular phone
Transferring a cellular call from the
h
andset to a cellular phone
1 Press MMENUN during a cellular call.
2 MbN: Transfer to cell a
MSELECTN
R The cellular call is transferred to
the cellular phone.
Note:
R Depending on your cellular phone
type, you may need to set the cellular
phone ready to talk before
transferring. For example, if your
cellular phone has a top cover, open it
beforehand.
Transferring a cellular call from a
c
ellular phone to the handset
During a conversation using a cellular
phone, the call cannot be transferred to
the handset by the cellular phone.
Perform the following with the handset.
1 During a conversation using a
cellular phone, press MCELLN.
R The call is transferred to the
handset when:
only 1 cellular phone is
registered.
the line is set to make cellular
calls (page 22).
For assistance, please visit http://www.panasonic.com/help
27
Making/Answering Calls Using the Handset
2 MbN:
Select the desired cellular
phone. a MSELECTN
R The call is transferred to the
handset.
Using the other line during a
c
onversation
You can handle a cellular call and a
landline call at the same time. When
another call is being received during a
conversation, the interrupt tone sounds
(page 43), and the 2nd caller’s
information is displayed if you subscribe
to Caller ID (page 49). You can
answer the 2nd call while holding the 1st
call.
Making/answering a cellular call
d
uring a conversation on the landline
1 Press MMENUN during a landline call.
2 MbN: Hold a MSELECTN
3 To make a 2nd call:
Dial the phone number. a
MCELLN
*1
a MbN: Select the desired
cellular phone. a MSELECTN
*1
The unit starts dialing when:
only 1 cellular phone is
registered.
a specific line is set to make
cellular calls (page 22).
To answer a 2nd call:
MCELLN
R To hold the 2nd call: MMENUN a
MbN: Hold a MSELECTN
4 To hang up the 2nd call and return
to the 1st call (landline call), press
MOFFN, then press M
N.
Making/answering a landline call
d
uring a conversation on a cellular line
1 Press MMENUN during a cellular call.
2 MbN: Hold a MSELECTN
3 T
o make a 2nd call:
Dial the phone number. a M
N
T
o answer a 2nd call:
M
N
R T
o hold the 2nd call: MMENUN a
MbN: Hold a MSELECTN
4 To hang up the 2nd call and return
to the 1st call (cellular call), press
MOFFN, then press MCELLN.
Power back-up
o
peration
Available for:
K
X-TG7641 series (page 3)
When a power failure occurs, the
c
harged handset temporarily supplies
power to the base unit (power back-up
mode). This allows you to make and
receive landline calls using a handset
during a power failure. The base unit will
not perform any other functions.
However, some functions such as Caller
ID and shared phonebook are available
only when using a handset other than
the handset supplying power to the base
unit. You can program Power
failure and the default setting is
Auto (page 44).
Important:
R If a handset is not placed on the base
unit when a power failure occurs,
Base no power Press OFF is
displayed. After pressing MOFFN on
the handset, place it on the base unit
to start power back-up mode.
R Power back-up mode will not work if
the battery level of the power
supplying handset is
or .
R D
o not lift the power supplying
handset from the base unit during
power back-up mode.
28
For assistance, please visit http://www.panasonic.com/help
Making/Answering Calls Using the Handset
R D
o not touch the handset’s charge
contacts during power back-up mode.
R If the battery level is low, the unit will
not work sufficiently during power
back-up mode. In addition, in case
handset battery power runs out, we
recommend connecting a corded-type
telephone (without AC adaptor) to the
same telephone line or to the same
telephone line jack using a Panasonic
T-adaptor (page 5).
Panasonic Ni-MH battery
p
erformance (supplied batteries)
during power back-up mode
When the batteries are fully charged,
operating time of the handset in power
back-up mode varies depending on
usage.
Continuous use of the handset in
power back-up mode: 2 hours max.
Continuous use of the handset other
than a handset in power back-up
mode: 3 hours max.
Not in use in power back-up mode: 3
hours max.
Note:
R Actual battery performance depends
on usage and ambient environment.
Making calls during a power
f
ailure
n When only 1 handset is registered:
1 Lift the handset and dial the
phone number.
2 Within 1 minute, place the
handset on the base unit.
R Wait until speakerphone is
turned on automatically and
the call is made.
3 When the other party answers
the call, keep the handset on the
base unit and talk using the
speakerphone.
4 W
hen you finish talking, press
MOFFN.
Note:
R In step 2, if you do not place the
handset on the base unit within 1
minute, the power back-up mode
turns off. In this case, press MOFFN on
the handset and dial the phone
number. Then try again from step 2.
n When 2 or more handsets are
registered:
You should leave one handset on the
base unit for supplying the power,
and use another handset for making
calls. For the operation, please see
“Making landline calls”, page 24.
Note:
R During a call with the handset placed
on the base unit (power back-up
mode), the call may be disconnected
if you touch the handset. In such
case, try to call back.
R The range of the base unit is limited
during a power failure. Please use the
handset close to the base unit.
Making a call using the redial list
n W
hen only 1 handset is registered:
1 Lift the handset.
2 MEN REDIAL
3 MbN: Select the desired phone
number.
4 Within 1 minute, place the
handset on the base unit.
R Wait until speakerphone is
turned on automatically and
the call is made.
n When 2 or more handsets are
registered:
You should leave one handset on the
base unit for supplying the power,
For assistance, please visit http://www.panasonic.com/help
29
Making/Answering Calls Using the Handset
and use another handset for making
c
alls.
For the operation, please see
“Making a call using the redial list”,
page 24.
Making a call using the shared
p
honebook
Only when 2 or more handsets are
registered to the base unit, you can
use the shared phonebook feature
during a power failure.
You should leave one handset on the
base unit for supplying the power, and
use another handset for making calls.
For the operation, please see “Finding
and calling from a phonebook entry”,
page 36.
Answering calls during a
p
ower failure
n When only 1 handset is registered:
1 When the unit rings, keep the
handset on the base unit and
press M
N
or M
N.
R S
peakerphone is turned on.
2 When you finish talking, press
MOFFN.
n When 2 or more handsets are
registered:
When the unit rings, use a handset
which is not supplying power to the
base unit. For the operation, please
see “Answering calls”, page 25.
R Do not use or lift the handset
which is placed on the base unit
during power back-up mode.
Note:
R During a call with the handset placed
on the base unit (power back-up
mode), the call may be disconnected
if you touch the handset. In such
case, try to call back.
R T
he range of the base unit is limited
during a power failure. Please use the
handset close to the base unit.
30
For assistance, please visit http://www.panasonic.com/help
Making/Answering Calls Using the Handset
Making cellular calls
Available for:
K
X-TG7641 series (page 3)
1 D
ial the phone number. a Press
MCELL 1N or MCELL 2N.
2 When the other party answers,
speak into the microphone.
R Speak alternately with the other
party.
3 When you finish talking, press
MSP-PHONEN.
Note:
R For best performance, use the
speakerphone in a quiet environment.
R While on a call, you can switch from
the base unit to the handset:
With the call sharing mode on
(page 33), press MCELLN on the
handset. a MbN: Select the desired
cellular phone. a MSELECTN a
Press MSP-PHONEN on the base unit.
When only 1 cellular phone is
registered or the line is set to make
cellular calls (page 22), press
MCELLN on the handset, then press
MSP-PHONEN on the base unit.
If the handset is on the base unit,
simply lift it.
Adjusting the speaker volume
P
ress MDN or MCN repeatedly while talking.
Making a cellular call using the redial
l
ist
The last 10 phone numbers dialed are
stored in the redial list (each 48 digits
max.).
1 M
N
REDIAL
2 MbN: Select the desired phone
number.
3 Press MCELL 1N or MCELL 2N.
Erasing a number in the redial list
1 M N
REDIAL
2 MbN: Select the desired phone
number. a MERASEN
3 MbN: Yes a M
N
4 MnN (EXIT)
Making landline calls
1 D
ial the phone number. a
MSP-PHONEN
2 When the other party answers,
speak into the microphone.
3 When you finish talking, press
MSP-PHONEN.
Note:
R While on a call, you can switch from
the base unit to the handset:
Press M
N
on the handset, then
press MSP-PHONEN on the base unit
with the call sharing mode on
(page 33).
If the handset is on the base unit,
simply lift it.
Making a call using the redial list
1 M N
REDIAL
2 MbN: Select the desired phone
number.
3 MSP-PHONEN
Pause (for PBX/long distance service
u
sers)
A pause is sometimes required when
making calls using a PBX or long
distance service. When storing a calling
card access number and/or PIN in the
phonebook, a pause is also needed
(page 38).
For assistance, please visit http://www.panasonic.com/help
31
Making/Answering Calls Using the Base Unit
Example: I
f you need to dial the line
access number “9” when making outside
calls with a PBX:
1 9 a MCONFN
2 Dial the phone number. a
MSP-PHONEN
Note:
R A 3.5 second pause is inserted each
time MCONFN is pressed. Repeat as
needed to create longer pauses.
Answering calls
W
hen a call is being received, the
SP-PHONE indicator flashes rapidly.
When a cellular call is being received,
the CELL 1 or CELL 2 indicator and
SP-PHONE indicator flash rapidly.
1 Press MSP-PHONEN when the unit
rings.
R You can also answer the cellular
call by pressing MCELL 1N or
MCELL 2N.
2 Speak into the microphone.
3 When you finish talking, press
MSP-PHONEN.
Adjusting the base unit ringer volume
n W
hile the base unit is ringing for an
incoming call:
KX-TG7621 series: page 3
Press MjN or MkN repeatedly to
select the desired volume.
R To turn the ringer off, press and
hold MkN until the unit beeps.
KX-TG7641 series: page 3
Press MDN or MCN repeatedly to select
the desired volume.
R To turn the ringer off, press and
hold MCN until the unit beeps.
n P
rogramming the volume
beforehand:
1 To change the cellular line
ringer volume:
For CELL 1:
MMENUN#*6281
For CELL 2:
MMENUN#*6282
To change the landline ringer
volume:
MMENUN#*160
2 MbN: Select the desired volume.
3 MSAVEN a MOFFN
Useful features during
a
call
Hold
T
his feature allows you to put an outside
call on hold.
1 Press MHOLDN during an outside
call.
2 To release hold on the cellular
line:
Press MCELL 1N or MCELL 2N.
R A handset user can take the call:
MCELLN
*1
a MSELECTN
*1
The call is taken when:
only 1 cellular phone is
registered.
the line is set to make
cellular calls (page 22).
To release hold on the landline:
Press MSP-PHONEN.
R A handset user can take the
landline call by pressing M
N.
N
ote:
R While a cellular line is on hold, the
CELL 1 or CELL 2 indicator flashes
red. While a landline call is on hold,
the SP-PHONE indicator flashes.
32
For assistance, please visit http://www.panasonic.com/help
Making/Answering Calls Using the Base Unit
R I
f a call is kept on hold for more than 9
minutes, an alarm tone starts to
sound. After 1 additional minute on
hold, the call is disconnected.
R If another phone is connected to the
same line, you can also take the call
by lifting its handset.
Mute
W
hile mute is turned on, you can hear
the other party, but the other party
cannot hear you.
1 Press MMUTEN during conversation.
R The SP-PHONE indicator on the
base unit flashes.
2 To return to the conversation, press
MMUTEN again.
Flash for landline calls
MF
LASHN allows you to use the special
features of your host PBX such as
transferring an extension call, or
accessing optional telephone services.
Note:
R To change the flash time, see
page 44.
For call waiting or Call
W
aiting Caller ID service users
To use call waiting or Call Waiting Caller
ID, you must first subscribe with your
service provider/telephone company.
This feature allows you to receive calls
while you are already talking on the
phone. If you receive a call while on the
phone, you will hear a call waiting tone.
If you subscribe to both Caller ID and
Call Waiting with Caller ID services,
the 2nd caller’s information is displayed
after you hear the call waiting tone on
the base unit.
1 Press MCALL WAITN to answer the
2nd call.
2 T
o switch between calls, press
MCALL WAITN.
Note:
R Please contact your service provider/
telephone company for details and
availability of this service in your area.
Temporary tone dialing for
l
andline calls (for rotary/pulse
service users)
You can temporarily switch the dialing
mode to tone when you need to access
touch-tone services (for example,
answering services, telephone banking
services, etc.).
Press * (TONE) before entering
access numbers which require tone
dialing.
Call share
Y
ou can join an existing outside call.
To select the line that is being used for
the call:
for a cellular line press MCELL 1N or
MCELL 2N.
for the landline press MSP-PHONEN.
Note:
R A maximum of 3 parties (including 1
outside party) can join a conversation
using 2 extensions. (3-way
conference)
R To prevent other users from joining
your conversations with outside
callers, turn call sharing mode off
(page 44).
For assistance, please visit http://www.panasonic.com/help
33
Making/Answering Calls Using the Base Unit
Transferring a cellular call
b
etween the base unit and a
cellular phone
Transferring a cellular call from the
b
ase unit to a cellular phone
During a cellular call, press and hold
MCELL 1N or MCELL 2N until the
SP-PHONE indicator goes out.
R The cellular call is transferred to the
cellular phone.
Transferring a cellular call from a
c
ellular phone to the base unit
During a conversation using a cellular
phone, press MCELL 1N or MCELL 2N.
R The cellular call is transferred to the
base unit.
Using the other line during a
c
onversation
You can handle a cellular call and a
landline call at the same time. When
another call is being received during a
conversation, the interrupt tone sounds
(page 43). You can answer the 2nd
call while holding the 1st call.
Making/answering a cellular call
d
uring a conversation on the landline
1 Press MHOLDN during a landline call.
2 To make a 2nd call:
Dial the phone number. a Press
MCELL 1N or MCELL 2N.
To answer a 2nd call:
Press MCELL 1N or MCELL 2N.
R To hold the 2nd call, press
MHOLDN.
3 To hang up the 2nd call and return
to the 1st call (landline call), press
MSP-PHONEN 2 times.
Making/answering a landline call
d
uring a conversation on a cellular line
1 Press MHOLDN during a cellular call.
2 To make a 2nd call:
MSP-PHONEN a Dial the phone
number.
To answer a 2nd call:
MSP-PHONEN
R To hold the 2nd call, press
MHOLDN.
3 To hang up the 2nd call and return
to the 1st call (cellular call), press
MSP-PHONEN, then press MCELL 1N
or MCELL 2N.
34
For assistance, please visit http://www.panasonic.com/help
Making/Answering Calls Using the Base Unit
Shared phonebook
T
he shared phonebook allows you to
make calls without having to dial
manually. The base unit
*1
and any
handset registered to the base unit can
use the shared phonebook. You can add
3050 names and phone numbers to the
shared phonebook, and assign each
phonebook entry to the desired group
(Home, Cell 1, Cell 2).
*1 KX-TG7641 series: page 3
Important:
R Only 1 person can access the shared
phonebook at a time.
R Caller ID subscribers can use group
ringer tone features (page 50).
R You can copy phonebook entries from
a Bluetooth cellular phone to the unit’s
shared phonebook (page 54).
R When a handset is supplying power to
the base unit during a power failure,
groups name are changed as follows:
Home a Group 1
Cell 1 a Group 2
Cell 2 a Group 3
Other groups (4 to 9) are displayed
but cannot be used. (KX-TG7641
series: page 3)
Adding entries
Handset
1 M N a MA
DDN
2 Enter the party’s name (16
characters max.). a MOKN
3 Enter the party’s phone number (24
digits max.). a MOKN
4 MbN: Select the desired group. a
MSELECTN 2 times
R To add other entries, repeat from
step 2.
5 MOFFN
Character table for entering names
W
hile entering characters, you can
switch between uppercase and
lowercase by pressing * (A®a).
Key Character
1 & ( ) H ,
. / 1
2 A B C 2
a b c 2
3 D E F 3
d e f 3
4 G H I 4
g h i 4
5 J K L 5
j k l 5
6 M N O 6
m n o 6
7 P Q R S 7
p q r s 7
8 T U V 8
t u v 8
9 W X Y Z 9
w x y z 9
0
0
# #
R T
o enter another character that is
located on the same dial key, first
press MEN to move the cursor to the
next space.
R If you do not press any dial key within
5 seconds after entering a character,
the character is fixed and the cursor
moves to the next space.
R
in the above table represents a
s
ingle space.
For assistance, please visit http://www.panasonic.com/help
35
Shared Phonebook
Erasing the character or number
P
ress MFN or MEN. a MCLEARN
R Press and hold MCLEARN to erase all
characters or numbers.
Groups
G
roups can help you find entries in the
phonebook quickly and easily. When
adding an entry to the phonebook, you
can assign it to one of 3 groups. You
can search for phonebook entries by
group. The group ringer tone feature is
available for Caller ID subscribers
(page 50).
Finding and calling from a
phonebook entry
Scrolling through all entries
n Using a cellular line
Handset
1 M N
2 MbN: Select the desired entry.
3 MCELLN
R The unit starts dialing when:
only 1 cellular phone is
registered.
a specific line is set to make
cellular calls (page 22).
4 MbN: Select the desired cellular
phone. a MSELECTN
Base unit
*1
*1 KX-TG7641 series: page 3
1 M N
2 MbN:
Select the desired entry.
3 Press MCELL 1N or MCELL 2N.
n U
sing the landline
Handset / Base unit
*1
*1 KX-TG7641 series: page 3
1 M N
2 MbN:
Select the desired entry.
3 Proceed with the operation for your
unit.
Handset: M
N
Base unit: MSP-PHONEN
Searching by first character
Handset / Base unit
*
1
*1 KX-TG7641 series: page 3
1 M
N
2 P
ress the dial key (09 or #)
which contains the character you
are searching for (page 35).
R Press the same dial key
repeatedly to display the first
entry corresponding to each
character located on that dial key.
R If there is no entry corresponding
to the character you selected, the
next entry is displayed.
3 MbN: Scroll through the phonebook if
necessary.
4 To make a cellular/landline call,
continue from step 3, “Scrolling
through all entries”, page 36.
Searching by query
You can narrow down the search to
enter the first characters of a name.
Handset / Base unit
*1
*1 KX-TG7641 series: page 3
1 M N a *
2 T
o search for the name, enter the
first characters (up to 4) in
uppercase (page 35).
R Characters cannot be entered in
lowercase.
36
For assistance, please visit http://www.panasonic.com/help
Shared Phonebook
R I
f there is no entry corresponding
to the characters you selected,
the next entry is displayed.
3 Proceed with the operation for your
unit.
Handset: MOKN
Base unit: M
N
4 MbN:
Scroll through the phonebook if
necessary.
5 To make a cellular/landline call,
continue from step 3, “Scrolling
through all entries”, page 36.
Searching by group
Handset
1 M N a MG
ROUPN
2 MbN: Select the group you want to
search. a MSELECTN
R If you select All, the unit ends
the group search.
3 MbN: Select the desired entry.
4 To make a cellular/landline call,
continue from step 3, “Scrolling
through all entries”, page 36.
Base unit
*
1
*1 KX-TG7641 series: page 3
1 M
N
2 times.
2 MbN: Select the group you want to
search. a M
N
R I
f you select All groups, the
unit ends the group search.
3 MbN: Select the desired entry.
4 To make a cellular/landline call,
continue from step 3, “Scrolling
through all entries”, page 36.
Editing entries
Handset
1 Find the desired entry (page 36). a
MMENUN
2 MbN: Edit a MSELECTN
3 Edit the name if necessary (16
characters max.; page 35). a MOKN
4 Edit the phone number if necessary
(24 digits max.). a MOKN
5 MbN: Select the desired group
(page 36). a MSELECTN 2 times
6 MOFFN
Erasing entries
Erasing an entry
Handset
1 F
ind the desired entry (page 36). a
MERASEN
2 MbN: Yes a MSELECTN
3 MOFFN
Base unit
*
1
*1 KX-TG7641 series: page 3
1 Find the desired entry (page 36). a
MERASEN
2 MbN: Yes a M
N
3 MnN
(EXIT)
Erasing all entries in a group
Handset
1 M N a MM
ENUN
2 MbN: Erase all a MSELECTN
3 MbN: Select the desired group. a
MSELECTN
4 MbN: Yes a MSELECTN
5 MbN: Yes a MSELECTN
6 MOFFN
For assistance, please visit http://www.panasonic.com/help
37
Shared Phonebook
Base unit
*
1
*1 KX-TG7641 series: page 3
1 M
N a ME
RASEN
2 MbN: Select the desired group. a
M
N
3 MbN:
Yes a M
N
4 MbN:
Yes a M
N
Chain dial
T
his feature allows you to dial phone
numbers in the phonebook while you are
on a call. This feature can be used, for
example, to dial a calling card access
number or bank account PIN that you
have stored in the phonebook, without
having to dial manually.
Handset / Base unit
*
1
*1 KX-TG7641 series: page 3
1 Proceed with the operation for your
unit.
During an outside call:
Handset: MMENUN a
MbN: Phonebook a MSELECTN
Base unit: M
N
2 MbN:
Select the desired entry.
3 Proceed with the operation for your
unit.
Handset: Press MCALLN to dial the
number.
Base unit: Press M
N
to dial the
number.
Note:
R When storing a calling card access
number and your PIN in the
phonebook as one phonebook entry,
press MPAUSEN to add pauses after
the number and PIN as necessary
(page 25).
R If you have rotary/pulse service, you
need to press * (TONE) before
pressing MMENUN on the handset or
M N
on the base unit in step 1 to
change the dialing mode temporarily
to tone. When adding entries to the
phonebook, we recommend adding
* (TONE) to the beginning of phone
numbers you wish to chain dial
(page 35).
38
For assistance, please visit http://www.panasonic.com/help
Shared Phonebook
Programmable settings
Y
ou can customize the unit by programming the following features using the handset.
To access the features, there are 2 methods:
n Scrolling through the display menus
1 MMENUN
2 Press MCN or MDN to select the desired main menu. a MSELECTN
3 Press MCN or MDN to select the desired item from the next sub-menus. a
MSELECTN
4 Press MCN or MDN to select the desired setting. a MSAVEN
R This step may vary depending on the feature being programmed.
R To exit the operation, press MOFFN.
n Using the direct command code
1 MMENUN a Enter the desired code.
Example: Press MMENUN#101.
2 Select the desired setting. a MSAVEN
R This step may vary depending on the feature being programmed.
R To exit the operation, press MOFFN.
Note:
R In the following table, < > indicates the default settings.
R In the following table,
indicates the reference page number.
R D
isplay menu order and sub-menu may vary depending on your model.
Display the menu tree and direct command code table
M
ain menu:
C
aller list
Operation Code
Viewing the caller list. #213 50
Main menu: A
nswering device
Sub-menu 1 Sub-menu 2 Settings Code
Play new msg.
(m
sg.: message)
#323 59
Play all msg.
#324 59
Erase all
m
sg.
*1
#325 60
For assistance, please visit http://www.panasonic.com/help
39
Programming
Sub-menu 1 Sub-menu 2 Settings Code
Greeting
Record greeting
*
1
#302 58
Check greeting
#303 58
Pre-recorded
*
1
(Reset to pre-recorded
greeting)
#304 58
Settings
Ring count
*
1
2–7: 2
-7 rings
<4 rings>
0: Toll saver
#211 62
Recording time
*
1
1: 1
min
3: <3 min>
0: Greeting
only
*2
#305 62
Remote code
*
1
<1
11> #306 60
Screen call
1: <O
n> 0: Off #310 57
Answer on
*
1
#327 57
Answer off
*
1
#328 57
Main menu: V
.M. access
*3
(V.M.: Voice mail)
Operation Code
Listening to voice mail messages. #330 65
Main menu: Intercom
Operation Code
Paging the desired unit. #274 66
40
For assistance, please visit http://www.panasonic.com/help
Programming
Main menu: B
luetooth
Sub-menu 1 Sub-menu 2 Settings Code
Link to cell
1
: Add new
device
*4
(for CELL 1)
2: Add new
device
*4
(for CELL 2)
Connect
*
1
/
Disconnect
*1
#6251
*5
21
#6252
*
6
Ringer volume
H
andset
*7
0–6: Off–6 <6>
#6281
*
5
25
#6282
*
6
Ringer volume
B
ase unit
*1, *7
0–6: Off–6 <1>
#G6
281
*5
32
#G6
282
*6
Ringer tone
*
8, *9
1–5: T
one 1-5
<Tone 2>
*5
<Tone 4>
*6
6–0: Melody 1-5
#6291
*
5
#6292
*
6
Select unit to
r
ing
*1
1–6: H
andset 1-6
G: <All>
#6271
*
5
20
#6272
*
6
Ring as cell
(
limited)
*1
1:
<On (with
Talking CID)>
2: On (without
Talking CID)
0: Off
#6141
*
5
20
#6142
*
6
Registration
#6241
*
5
19
#6242
*
6
Phonebook
t
ransfer
#618 54
Headset Add new
d
evice
*4
#621 55
Connect
*
1
/
Disconnect
*1
#622 55
Registration
#621 55
For assistance, please visit http://www.panasonic.com/help
41
Programming
Sub-menu 1 Sub-menu 2 Settings Code
Settings
Auto connect
*
1
1:
<1 min>
2: 3 min
3: 5 min
4: 10 min
0: Off
#632 21
Cell area
c
ode
*1
#633 22
Cell line only
m
ode
*1
1: O
n 0: <Off> #157 21
Cell line
s
elect
Handset
1: C
ellphone 1
*4
2: Cellphone 2
*4
0: <Manual>
#634 22
Cell line
s
elect
Base unit
*1, *10
1: C
ellphone 1
*4
2: Cellphone 2
*4
#G6
34
Set PIN
*1
<0
000> #619 22
Deregistration
*2
#134 23
Main menu: S
et date & time
Sub-menu 1 Sub-menu 2 Settings Code
Date and time
*
1
#101 17
Alarm
1: O
nce
2: Daily
0: <Off>
#720 46
Time
a
djustment
*1, *11
1:
<Caller ID
auto>
0: Manual
#226
42
For assistance, please visit http://www.panasonic.com/help
Programming
Main menu: I
nitial setting
Sub-menu 1 Sub-menu 2 Settings Code
Ringer setting
Ringer volume
H
andset
*3, *7
0–6: Off–6 <6> #160 25
Ringer volume
B
ase unit
*1, *3, *7
0–6: Off–6 <1> #G160 32
Ringer tone
*
3, *8,
*9, *12
(Handset)
1–5: T
one 1-5
<Tone 1>
6–0: Melody 1-5
#161
Interrupt tone
H
andset
*13
1:
<On> 0: Off #201 28
Interrupt tone
B
ase unit
*1, *10, *13
1:
<On> 0: Off #G201 34
Silent mode
O
n/Off
1: O
n 0: <Off> #238 46
Silent mode
S
tart/End
<1
1:00 PM/06:
00 AM>
#237 46
Set d
ate & time
Date and time
*
1
#101 17
Alarm
1: O
nce
2: Daily
0: <Off>
#720 46
Time
a
djustment
*1, *11
1:
<Caller ID
auto>
0: Manual
#226
Talking Caller
I
D
Handset
1:
<On> 0: Off #162 49
Base unit
*
1
1: O
n 0: <Off> #G162
Handset name
#104 47
Call block
*
1
#217 47
Block w/o num
*
1, *2
(Block calls without
phone number)
1: O
n 0: <Off> #240 48
Voice mail
*3
Store VM
a
ccess#
*1
(VM: Voice mail)
#331 64
VM tone detect
*
1
1:
<On> 0: Off #332 64
Message alert
1:
<On> 0: Off #340 63
LCD contrast
*
14
(Display contrast)
1–6: L
evel 1–6 <3> #145
For assistance, please visit http://www.panasonic.com/help
43
Programming
Sub-menu 1 Sub-menu 2 Settings Code
Key tone
*
15
1: <O
n> 0: Off #165
Caller ID edit
(
Caller ID number
auto edit)
Handset
1:
<On> 0: Off #214 52
Base unit
*
1, *10
1: <O
n> 0: Off #G214
Auto talk
*
16
1: O
n 0: <Off> #200 25
Set tel line
*3
Set dial mode
*1
1: P
ulse
2: <Tone>
#120 18
Set flash
t
ime
*1, *17
0: 9
00 ms
1: <700 ms>
2: 600 ms
3: 400 ms
4: 300 ms
5: 250 ms
G: 200 ms
#: 160 ms
6: 110 ms
7: 100 ms
8: 90 ms
9: 80 ms
#121 26
Set l
ine mode
*1, *18
1: A
2: <B> #122
Call sharing
*1
1: <O
n> 0: Off #194 27,
33
Registration Register handset
#130 48
Deregistration
*2
#131 48
Power
f
ailure
*10
1: <A
uto> 0: Off #152 28
Change
l
anguage
Display
(Handset)
1: <E
nglish>
2: Español
#110 18
Voice prompt
*
1
1: <E
nglish>
2: Español
#112 18
Main menu: Customer support
*19
Operation Code
Displaying customer support Web address. #680
*1 If you program these settings using one of the handsets, you do not need to
p
rogram the same item using another handset.
*2 This menu is not displayed when scrolling through the display menus. It is only
available in direct command code.
44
For assistance, please visit http://www.panasonic.com/help
Programming
*3 When the cellular line only mode is turned on, these menus are not displayed
(
page 21).
*4 After the Bluetooth device is registered, the device name is displayed.
*5 For CELL 1
*6 For CELL 2
*7 Ringer volume cannot be turned off for alarm, intercom calls, and paging.
*8 If you select one of the melody ringer tones, the ringer tone continues to play for
several seconds even if the caller has already hung up. You may either hear a
dial tone or no one on the line when you answer the call.
*9 The preset melodies in this product are used with permission of © 2009
Copyrights Vision Inc.
*10 KX-TG7641 series: page 3
*11 This feature allows the unit to automatically adjust the date and time each time
caller information including date and time is received.
To turn this feature on, select Caller ID auto. To turn this feature off,
select Manual. (Caller ID subscribers only)
To use this feature, set the date and time first (page 17).
*12 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a
tone (tone 1 to 5). If you select a melody, you cannot distinguish lines by their
ringers.
*13 This tone lets you know when you receive an outside call while you are on
another line or an intercom call. If you select On, the tone sounds 2 times.
*14 KX-TG7641 series base unit
You can adjust the contrast of the base unit display by performing the following
operation.
MDISPLAYN a MbN: Contrast a M
N a MbN:
Select the desired setting.
a M
N
*
15 Turn this feature off if you prefer not to hear key tones while you are dialing or
pressing any keys, including confirmation tones and error tones.
*16 If you subscribe to a Caller ID service and want to view the caller’s information
after lifting up the handset to answer a call, turn off this feature.
*17 The flash time depends on your telephone exchange or host PBX. Contact your
PBX supplier if necessary. The setting should stay at 700 ms unless pressing
MFLASHN fails to pick up the waiting call.
*18 Generally, the line mode setting should not be changed. This setting
automatically maintains receiver volume at the proper level depending on the
current telephone line condition. Set the line mode to A if telephone line
condition is not good.
*19 The handset can display the Internet address where you can download the
operating instructions or get further information for this product, using your
computer.
For assistance, please visit http://www.panasonic.com/help
45
Programming
Special programming
Alarm
A
n alarm sounds at the set time for 3
minutes once or daily. Alarm can be set
for each handset.
Important:
R Set the date and time beforehand
(page 17).
1 MMENUN#720
2 MbN: Select the desired alarm option.
a MSELECTN
Off
Turns alarm off. Go to
s
tep 7.
Once
An alarm sounds once at
t
he set time.
Daily
An alarm sounds daily at
t
he set time. Go to step 4.
3 Enter the desired month and date.
a MOKN
4 Set the desired time.
5 MAM/PMN: Select AM or PM. a
MOKN
6 MbN: Select the desired alarm tone.
a MSELECTN
R We recommend selecting a
different ringer tone from the one
used for outside calls.
7 MSELECTN a MOFFN
R When the alarm is set, is
d
isplayed.
Note:
R To stop the alarm, press MOFFN or
place the handset on the base unit or
charger.
R When the handset is in use, the alarm
will not sound until the handset is in
standby mode.
Silent mode
S
ilent mode allows you to select a
period of time during which the handset
will not ring for outside calls. This feature
is useful for time periods when you do
not want to be disturbed, for example,
while sleeping. Silent mode can be set
for each handset.
Important:
R Set the date and time beforehand
(page 17).
R We recommend turning the base unit
ringer off (page 41, 43) in addition to
turning the silent mode on.
R If you have set the alarm, the alarm
sounds even if the silent mode is
turned on.
Turning silent mode on/off
1 MM
ENUN#238
2 MbN: Select the desired setting. a
MSAVEN
R If you select Off, press MOFFN
to exit.
3 Enter the desired hour and minute
you wish to start this feature.
4 MAM/PMN: Select AM or PM. a
MOKN
5 Enter the desired hour and minute
you wish to end this feature.
6 MAM/PMN: Select AM or PM.
7 MSAVEN a MOFFN
R When the silent mode is set,
is
d
isplayed.
Changing the start and end time
1 MM
ENUN#237
2 Continue from step 3, “Turning silent
mode on/off”, page 46.
46
For assistance, please visit http://www.panasonic.com/help
Programming
Changing the handset name
E
ach handset can be given a
customized name (“Bob”, “Kitchen”,
etc.). This is useful when you make
intercom calls between handsets. You
can also select whether or not the
handset name is displayed in standby
mode. The default setting is No. If you
select Yes without entering any
handset name, Handset 1 to
Handset 6 is displayed.
1 MMENUN#104
2 Enter the desired name (max. 10
characters; see the character table,
page 35).
R If not required, go to step 3.
3 MSAVEN
4 MbN: Select the desired setting. a
MSELECTN 2 times
5 MOFFN
Call block (Caller ID
s
ubscribers only)
This feature allows the unit to reject calls
when:
the unit receives a call from a phone
number stored in the call block list as
unwanted (“Storing unwanted callers”,
page 47).
the unit receives a call without phone
number (“Blocking incoming calls
without phone number”, page 48).
When a call is received, the unit rings for
a short time while the caller is being
identified. If the phone number matches
an entry in the call block list:
cellular calls are rejected.
landline calls are disconnected after
the unit first sends out a busy tone to
the caller.
Important:
R When the unit receives a call from a
number that is stored in the call block
list or a call without a recognized
p
hone number, the call is logged in
the caller list (page 50) with
after
t
he call is disconnected.
Storing unwanted callers
Y
ou can store up to 30 phone numbers
in the call block list.
Important:
R We recommend storing 10 digits
(including an area code). If only 7
digits are stored, all numbers that
have the same last 7 digits will be
blocked.
n From the caller list:
1 MFN CID
2 MbN: Select the entry to be
blocked.
R To edit the number, press
MSELECTN, then press MEDITN
repeatedly until the phone
number is shown in the
10-digit format.
3 MSAVEN
4 MbN: Call block a
MSELECTN
5 MbN: Yes a MSELECTN
6 Edit the phone number if
necessary (24 digits max.).
7 MSAVEN a MOFFN
n By entering phone numbers:
1 MMENUN#217 a MADDN
2 Enter the phone number (24
digits max.).
R To erase a digit, press
MCLEARN.
3 MSAVEN a MOFFN
For assistance, please visit http://www.panasonic.com/help
47
Programming
Blocking incoming calls without
p
hone number
You can reject a call when no phone
number is provided, such as a call just
showing Out of area.
1 MMENUN#240
2 MbN: Select the desired setting. a
MSAVEN a MOFFN
Viewing/editing/erasing call block
n
umbers
1 MMENUN#217
2 MbN: Select the desired entry.
R To exit, press MOFFN.
3 To edit a number:
MEDITN a Edit the phone number.
a MSAVEN a MOFFN
To erase a number:
MERASEN a MbN: Yes a
MSELECTN a MOFFN
Note:
R When editing, press the desired dial
key to add, MCLEARN to erase.
R When viewing, Block w/o num is
displayed if the blocking incoming
calls without phone number feature is
turned on. To turn the feature off:
MERASEN a MCN a MSAVEN a
MOFFN
Registering a unit
Operating additional units
Additional handsets
U
p to 6 handsets can be registered to
the base unit.
Important:
R See page 5 for information on the
available model.
Registering a handset to the
b
ase unit
The supplied handset and base unit are
pre-registered. If for some reason the
handset is not registered to the base
unit, re-register the handset.
1 Handset:
MMENUN#130
2 Base unit:
Press and hold MLOCATORN for
about 5 seconds until the
registration tone sounds.
R If all registered handsets start
ringing, press MLOCATORN again
to stop, then repeat this step.
R The next step must be completed
within 90 seconds.
3 Handset:
Press MOKN, then wait until a long
beep sounds.
Note:
R While registering, Base in
registering is displayed on all
registered handsets.
R When you purchase an additional
handset, refer to the additional
handset’s installation manual for
registration.
Deregistering a handset
A
handset can cancel its own
registration to the base unit, or other
handsets registered to the same base
unit. This allows the handset to end its
wireless connection with the system.
1 MMENUN#131
R All handsets registered to the
base unit are displayed.
2 MbN: Select the handset you want to
cancel. a MSELECTN
3 MbN: Yes a MSELECTN
4 MOFFN
48
For assistance, please visit http://www.panasonic.com/help
Programming
Using Caller ID service
I
mportant:
R This unit is Caller ID compatible. To
use Caller ID features, you must
subscribe to a Caller ID service.
Contact your service provider/
telephone company for details.
Caller ID features
Handset / Base unit
*
1
*1 KX-TG7641 series: page 3
When an outside call is being received,
the caller’s name and phone number are
displayed.
Caller information for the last 50 callers
is logged in the caller list from the most
recent call to the oldest.
R If the unit cannot receive caller
information, the following is displayed:
Out of area: The caller dials
from an area which does not
provide a Caller ID service.
Private caller: The caller
requests not to send caller
information.
Long distance: The caller
makes a long distance call.
R If the unit is connected to a PBX
system, caller information may not be
properly received. Contact your PBX
supplier.
Missed calls
Handset / Base unit
*
1
*1 KX-TG7641 series: page 3
If a call is not answered, the unit treats it
as a missed call. The display shows
Missed call. This lets you know if
you should view the caller list to see who
called while you were away.
Note:
R E
ven when there are unviewed
missed calls, Missed call
disappears from the standby display if
the following operation is performed
by one of the units:
A handset is replaced on the base
unit or charger.
Pressing MOFFN on a handset.
Pressing MnN (EXIT) on the base
unit.
Phonebook name display
W
hen caller information is received and
it matches a phone number stored in the
phonebook, the stored name in the
phonebook is displayed and logged in
the caller list.
Talking Caller ID
Handset / Base unit
T
his feature lets you know who is calling
without looking at the display.
To use this feature, you must:
subscribe to a Caller ID service of
your service provider/telephone
company.
turn this feature on (page 43).
When caller information is received, the
handsets and base unit announce the
caller’s name or phone number received
from your service provider/telephone
company following every ring.
The unit announces in English only.
R Name pronunciation may vary. This
feature may not pronounce all names
correctly.
R Caller ID service has a limit of how
many characters can be displayed. If
the caller’s name is too long:
the handset may not be able to
display or announce the entire
name.
For assistance, please visit http://www.panasonic.com/help
49
Caller ID Service
the base unit may not be able to
d
isplay
*1
or announce the entire
name.
R The announcement is heard at the
same level as the ringer volume
(page 41, 43).
R If you turn on the answering system
and set the number of rings 2
rings (page 62), the unit does not
announce the caller information from
the landline. If Toll saver is
selected and there is a new message,
the unit does not announce the caller
information from the landline.
R When you receive a call while on the
phone, the 2nd caller’s name is not
announced even if you subscribe to
both Caller ID and Call Waiting with
Caller ID services.
*1 KX-TG7641 series: page 3
Phonebook name announcement
W
hen caller information is received and
it matches a phone number stored in the
phonebook, the stored name in the
phonebook is announced.
Ringer ID
Y
ou can select the desired ringer tone to
a group that each phonebook entry is
assigned (page 36). When a call is
received from a caller assigned to a
group, the ringer tone you selected for
that group rings instead of the called
line’s ringer tone (page 20, 41, 43) after
caller information is displayed. If you
select Current ringer (default),
the unit uses the called line’s ringer tone
when calls from this group are received.
1 M
N a MMENUN
2 MbN: Group a MSELECTN
3 MbN: Select the desired group. a
MSELECTN
4 MbN: Select the desired ringer tone.
a MSAVEN
5 MO
FFN
Caller list
I
mportant:
R Only 1 person can access the caller
list at a time.
R Make sure the unit’s date and time
setting is correct (page 17).
Viewing the caller list and
c
alling back
n Using a cellular line
Handset
1 MFN
CID
2 Press M
N to search from the most
recent call, or M N to search from the
oldest call.
3 To call back, press MSELECTN.
To exit, press MOFFN.
4 MCELLN
R The unit starts dialing when:
only 1 cellular phone is
registered.
a specific line is set to make
cellular calls (page 22).
5 MbN: Select the desired cellular
phone. a MSELECTN
Base unit
*
1
*1 KX-TG7641 series: page 3
1 M
N
CID
2 Press MCN to search from the most
recent call, or MDN to search from the
oldest call.
3 To call back, press MCELL 1N or
MCELL 2N.
To exit, press MnN (EXIT).
50
For assistance, please visit http://www.panasonic.com/help
Caller ID Service
n U
sing the landline
Handset
1 MFN
CID
2 Press MCN to search from the most
recent call, or MDN to search from the
oldest call.
3 To call back, press M
N.
T
o exit, press MOFFN.
Base unit
*
1
*1 KX-TG7641 series: page 3
1 M
N
CID
2 Press MCN to search from the most
recent call, or MDN to search from the
oldest call.
3 To call back, press MSP-PHONEN.
To exit, press MnN (EXIT).
Note for handset and base unit:
R If the entry has already been viewed
or answered, “
” is displayed, even if
i
t was viewed or answered using
another unit.
R In step 2, if
is displayed, not all of
t
he information is shown. To see the
remaining information:
Handset:
Press MEN. To return to the previous
screen, press MFN.
Base unit:
Press M
N.
To return to the previous
screen, press M
N.
R or indicates the caller
i
nformation was received from the
cellular line.
Editing a caller’s phone
n
umber before calling back
You can edit a phone number in the
caller list by removing its area code and/
or the long distance code “1”.
Handset
1 MFN
CID
2 MbN: Select the desired entry.
3 Press MSELECTN, then press
MEDITN repeatedly until the phone
number is shown in the desired
format.
A
B
C
Local phone number
E
xample: 321-5555
Area code – Local phone number
Example: 555-321-5555
1 – Area code – Local phone
number
Example: 1-555-321-5555
4 U
sing a cellular line:
To make a cellular call, continue
from step 4, “Viewing the caller list
and calling back”, page 50.
Using the landline:
M
N
Base unit
*
1
*1 KX-TG7641 series: page 3
1 M
N
CID
2 MbN: Select the desired entry.
3 Press MEDITN repeatedly until the
phone number is shown in the
desired format.
A
B
C
Local phone number
E
xample: 321-5555
Area code – Local phone number
Example: 555-321-5555
1 – Area code – Local phone
number
Example: 1-555-321-5555
For assistance, please visit http://www.panasonic.com/help
51
Caller ID Service
4 U
sing a cellular line:
To make a cellular call, continue
from step 3, “Viewing the caller list
and calling back”, page 50.
Using the landline:
MSP-PHONEN
Caller ID number auto edit
f
eature
Handset / Base unit
*
1
*1 KX-TG7641 series: page 3
Once you call back an edited number,
the unit which was used to call back
remembers the area code and format of
the edited number. The next time
someone calls from the same area
code, caller information is customized by
the unit as follows:
When the call is being received, the
Caller ID number is displayed in the
same format as the edited number.
After the call has ended, the caller’s
phone number is displayed in the
same format as the edited number,
when reviewed from the caller list.
For example, you can use this feature to
set the unit to ignore the area code of
callers in your area, so that you can call
these local numbers using caller
information without dialing the area code.
To activate this feature, you must edit an
entry in the caller list, then call that
number. After that, phone numbers from
that caller’s area code are edited
automatically.
This feature can be set for each unit
(page 44). The default setting is On.
Note:
R Phone numbers from the 4 most
recently edited area codes are
automatically edited.
R If you move to another area, you can
turn this feature off to erase previously
edited area codes. To use this feature
again, turn it on and reprogram the
a
rea codes you want to edit once
again.
Erasing selected caller
i
nformation
Handset
1 MFN
CID
2 MbN: Select the desired entry.
3 MERASEN a MbN: Yes
4 MSELECTN a MOFFN
Base unit
*
1
*1 KX-TG7641 series: page 3
1 M
N
CID
2 MbN: Select the desired entry.
3 MERASEN a MbN: Yes
4 M
N a MnN
(EXIT)
Erasing all caller information
Handset
1 MFN
CID
2 MERASEN a MbN: Yes
3 MSELECTN a MOFFN
Base unit
*1
*1 KX-TG7641 series: page 3
1 M N CID
2 MERASEN a MbN: Yes
3 M N
Storing caller information to
t
he phonebook
Handset
1 M N
CID
2 MbN: Select the desired entry.
R To edit the number, press
MSELECTN, then press MEDITN
52
For assistance, please visit http://www.panasonic.com/help
Caller ID Service
repeatedly until the phone
n
umber is shown in the desired
format.
3 MSAVEN
4 MbN: Phonebook a MSELECTN
5 Continue from step 3, “Editing
entries”, page 37.
Base unit
*1
*1 KX-TG7641 series: page 3
1 M N
CID
2 MbN: Select the desired entry.
R To edit the number, press MEDITN
repeatedly until the phone
number is shown in the desired
format.
3 M
N a MbN:
Yes a M
N
4 MnN
(EXIT)
Note:
R If you stored caller information to the
phonebook using the base unit, the
entry is automatically assigned to
Home.
For assistance, please visit http://www.panasonic.com/help
53
Caller ID Service
Copying phonebook
f
rom a cellular phone
(phonebook transfer)
You can copy phonebook entries from
the registered cellular phones or other
cellular phones (not registered) to the
unit’s shared phonebook. A cellular
phone must be Bluetooth wireless
technology compatible.
Important:
R If a copied entry has 2 or more phone
numbers, each phone number (6
max.) is stored as a separate entry
with the same name.
R If a phonebook entry includes
additional data such as a picture, that
entry may fail to copy to the base unit.
1 Handset:
MMENUN#618
2 Handset:
To copy from registered cellular
phones:
MbN: Select the desired cellular
phone. a MSELECTN
R Copied items are stored to the
group (Cell 1 or Cell 2)
which the cellular phone is
registered to.
To copy from other cellular
phones (not registered):
MbN: Other cell a MSELECTN
a MbN: Select the group you want
to copy to. a MSELECTN
3 WhenTransfer phonebook
from cell.” is displayed:
Go to step 4.
WhenSelect modemenu is
displayed:
MbN: Select Auto or Manual.
a MSELECTN
A
uto: Download all entries from
the cellular phone automatically. Go
to step 5.
Manual: Copy entries you
selected.
R Select mode menu is
displayed only when the cellular
phone supports PBAP (Phone
Book Access Profile) for Bluetooth
connection.
4 Cellular phone:
Follow the instructions of your
cellular phone to copy phonebook
entries.
R For other cellular phones (not
registered), you need to search
for and select the base unit. The
base unit PIN (default: 0000)
may be required.
R The entries being copied are
displayed on the handset.
5 Handset:
Wait until Completed is
displayed.
R You can continue copying other
entries if necessary.
6 Handset: MOFFN
Note:
R Some copied entries may have
characters which do not exist in the
character table (page 35). These
characters can be displayed but
cannot be entered when editing an
entry.
R The unit does not support some
characters. If a copied entry includes
those characters, they are replaced
with other available characters orH”.
R If you receive a call while copying
phonebook entries, the copying
procedure stops. Try again after
finishing the call.
54
For assistance, please visit http://www.panasonic.com/help
Using Bluetooth Devices
Using a Bluetooth
w
ireless headset
(optional) for landline
calls
By registering a Bluetooth headset to the
base unit, you can have a hands-free
conversation wirelessly for landline calls.
Important:
R 1 headset can be registered to the
base unit. However, only one
Bluetooth device (cellular phone or
headset) can be connected to the
base unit at a time.
R For best performance, we
recommend using a Bluetooth
headset within 1 m (3.3 feet) of the
base unit. A headset can
communicate with the base unit within
a range of approximately 10 m (33
feet).
Registering a headset to the
b
ase unit
Important:
R Make sure that the Bluetooth headset
is not connected to any other
Bluetooth device.
1 Your headset:
Set your headset to registration
mode.
R Refer to the headset operating
instructions.
2 Handset:
MMENUN#621
3 Enter your headset PIN.
R Typically, default PIN is 0000.
Refer to the headset operating
instructions.
4 Press MOKN, then wait until a long
beep sounds.
5 MO
FFN
R When the HEADSET indicator on
the base unit lights green, you are
ready to use the headset.
Connecting/disconnecting a headset
I
f you cannot connect the headset and
base unit using the headset, you can
connect using the unit.
To use your headset with another
Bluetooth device such as a cellular
phone, you may need to disconnect it
from the base unit.
Important:
R Make sure that the headset is turned
on.
Base unit
*
1
*1 KX-TG7641 series: page 3
To connect:
Press MHEADSETN.
To disconnect:
Press and hold MHEADSETN until a long
beep sounds.
Handset
1 T
o connect/disconnect:
MMENUN#622
R A long beep sounds.
2 MOFFN
Deregistering a headset
Y
ou can cancel a registration of the
headset that is stored to the base unit.
See “Deregistering Bluetooth devices”,
page 23.
Operating a Bluetooth
w
ireless headset using a
landline
Important:
R Refer to your headset operating
instructions for headset operations.
For assistance, please visit http://www.panasonic.com/help
55
Using Bluetooth Devices
Answering landline calls with your
h
eadset
To answer a landline call, turn on your
headset referring to your headset
operating instructions.
When you finish talking, turn off your
headset referring to your headset
operating instructions.
Note:
R If you cannot hang up the call using
your headset;
press MnN (STOP) on the base unit.
(KX-TG7621 series: page 3)
press MSP-PHONEN on the base
unit 2 times. (KX-TG7641 series:
page 3)
Switching between the base unit and
y
our headset
You can switch between the base unit
and your headset:
during a landline call with the base
unit speakerphone. (KX-TG7641
series: page 3)
during an intercom call between the
base unit and handset. (KX-TG7641
series: page 3)
while listening to messages recorded
on the base unit answering system.
*1
n KX-TG7641 series: page 3
To switch to your headset:
Press MHEADSETN on the base unit.
To switch to the base unit:
Press MSP-PHONEN on the base unit.
*1 KX-TG7621 series: page 3
R You can only switch from the
base unit to your headset. Turn
on the headset referring to your
headset operating instructions.
Call sharing between your headset
a
nd the handset
Important:
R To activate this feature, you should
set call sharing mode to on
beforehand (page 44).
n While the handset is on a landline
call:
To join the conversation with your
headset, turn on the headset
referring to your headset operating
instructions.
n While your headset is on a landline
call:
To join the conversation with the
handset, press M
N.
Adjusting your headset receiver
v
olume
Base unit
n K
X-TG7621 series: page 3
Press MjN or MkN repeatedly while
using your headset.
n KX-TG7641 series: page 3
Press MDN or MCN repeatedly while
using your headset.
56
For assistance, please visit http://www.panasonic.com/help
Using Bluetooth Devices
Answering system for
l
andline
The answering system can answer and
record calls for you when you are
unavailable to answer the phone.
You can also set the unit to play a
greeting message but not to record
caller messages by selecting
Greeting only as the recording
time setting (page 62).
Important:
R Only 1 person can access the
answering system (listen to
messages, record a greeting
message, etc.) at a time.
R When callers leave messages, the
unit records the day and time of each
message. Make sure the date and
time have been set correctly
(page 17).
R When the cellular line only mode is
set (page 21), the answering system
cannot be used and any messages
are not received. You can record
voice memo messages (page 60).
Memory capacity (including
y
our greeting message)
The total recording capacity is about 18
minutes. A maximum of 64 messages
can be recorded.
Note:
R When message memory becomes full:
Messages full is shown on
the handset and base unit
*1
display.
The ANSWER ON/OFF indicator
on the base unit flashes rapidly if
the answering system is turned on.
The message counter on the base
unit flashes if the answering system
is turned on. (KX-TG7621series:
page 3)
If you use the pre-recorded greeting
m
essage, the unit automatically
switches to another pre-recorded
greeting message asking callers to
call again later.
If you recorded your own greeting
message, the same message is still
announced to callers even though
their messages are not recorded.
*1 KX-TG7641 series: page 3
Turning the answering
s
ystem on/off
Base unit
P
ress MANSWER ON/OFFN to turn on/
off the answering system.
Handset
1 T
o turn on:
MMENUN#327
To turn off:
MMENUN#328
2 MOFFN
Note for base unit and handset:
R When the answering system is turned
on:
The ANSWER ON/OFF indicator
on the base unit lights up.
The message counter on the base
unit displays the total number of
messages (old and new).
(KX-TG7621 series: page 3)
Call screening
W
hile a caller is leaving a message, you
can listen to the call through the unit’s
speaker.
Handset
T
o adjust the speaker volume, press MDN
or MCN repeatedly. You can answer the
call by pressing M
N.
Call screening
For assistance, please visit http://www.panasonic.com/help
57
Answering System for Landline
can be set for each handset. The default
s
etting is On.
1 MMENUN#310
2 MbN: Select the desired setting. a
MSAVEN a MOFFN
Base unit
*
1
*1 KX-TG7641 series: page 3
To adjust the speaker volume, press MDN
or MCN repeatedly. You can answer the
call by pressing MSP-PHONEN.
To turn off while screening a call, press
M
N
repeatedly until the sounds goes off.
R If you adjust the speaker volume while
listening to messages or having a
conversation, the speaker volume for
call screening is turned on again.
Greeting message
W
hen the unit answers a call, a greeting
message is played to callers.
You can use either:
your own greeting message
a pre-recorded greeting message
Recording your greeting
m
essage
1 MMENUN#302
2 MbN: Yes a MSELECTN
3 After a beep sounds, hold the
handset about 20 cm (8 inches)
away and speak clearly into the
microphone (2 minutes max.).
4 Press MSTOPN to stop recording.
5 MOFFN
Using a pre-recorded greeting
m
essage
The unit provides 2 pre-recorded
greeting messages:
If you erase or do not record your own
g
reeting message, the unit plays a
pre-recorded greeting asking callers
to leave a message.
If the message recording time
(page 62) is set to Greeting
only, callers’ messages are not
recorded and the unit plays a different
pre-recorded greeting message
asking callers to call again.
Resetting to a pre-recorded greeting
m
essage
If you want to use a pre-recorded
greeting message once you record your
own greeting message, you need to
erase your own greeting message.
1 MMENUN#304
2 MYESN a MOFFN
Playing back the greeting
m
essage
1 MMENUN#303
2 MOFFN
Listening to messages
u
sing the base unit
When new messages have been
recorded:
M
N
on the base unit flashes.
New message is displayed.
(KX-TG7641 series: page 3)
Press M
N.
R I
f new messages have been recorded,
the base unit plays back new
messages.
R If there are no new messages, the
base unit plays back all messages.
58
For assistance, please visit http://www.panasonic.com/help
Answering System for Landline
Operating the answering
s
ystem during playback
Key Operation
MjN
or MkN
*1
MDN or MCN
*2
Adjust the speaker
v
olume
M
N
Repeat message
*
3
M
N Skip message
MC
ONFN
*2
Pause message
T
o resume playback,
press M N.
MnN
(STOP) Stop playback
ME
RASEN Erase currently playing
message
*1 KX-TG7621 series: page 3
*
2 KX-TG7641 series: page 3
*3 If pressed within the first 5 seconds
of a message, the previous
message is played.
Calling back (Caller ID
s
ubscribers only)
Available for:
K
X-TG7641 series (page 3)
If caller information was received for the
c
all, you can call the caller back while
listening to a message.
Press MSP-PHONEN during playback.
R To edit the number before calling
back, press MEDITN repeatedly until
the phone number is shown in the
desired format (page 51).
Erasing all messages
P
ress MERASEN 2 times while the unit is
not in use.
Listening to messages
u
sing the handset
When new messages have been
recorded:
New message is displayed.
The message indicator on the
handset flashes slowly if the message
alert feature is turned on (page 63).
1 To listen to new messages:
MMENUN a MPLAYN
or
MMENUN#323
To listen to all messages:
MMENUN#324
2 When finished, press MOFFN.
Note:
R To switch to the receiver, press M
N.
Operating the answering
s
ystem
MMENUN a MbN: Answering
device a MSELECTN
Key Operation
MDN
or MCN Adjust the receiver/
speaker volume
(during playback)
1
or MFN Repeat message
(during playback)
*1
2
or MEN Skip message
(during playback)
3 Enter the S
ettings
menu
4 Play new messages
5 Play all messages
6 Play greeting message
76 Record greeting message
8 Turn answering system on
MP
AUSEN
Pause message
*
2
For assistance, please visit http://www.panasonic.com/help
59
Answering System for Landline
Key Operation
9
or
MSTOPN
Stop recording
Stop playback
0 Turn answering system off
*4
*3
Erase currently playing
m
essage
*5 Erase all messages
*6 Reset to a pre-recorded
g
reeting message
*1 If pressed within the first 5 seconds
o
f a message, the previous
message is played.
*2 To resume playback:
MbN: Playback a MSELECTN
*3 You can also erase as follows:
MERASEN a MbN: Yes a
MSELECTN
Calling back (Caller ID
s
ubscribers only)
If caller information is received for the
call, you can call the caller back while
listening to a message.
1 Press MPAUSEN during playback.
2 MbN: Call back a MSELECTN
Editing t
he number before calling back
1 Press MPAUSEN during playback.
2 MbN: Edit & Call a MSELECTN
3 Press MEDITN repeatedly until the
phone number is shown in the
desired format (page 51). a M
N
R T
o call back using a cellular line,
continue from step 2, “Making
cellular calls”, page 24.
Erasing all messages
1 MM
ENUN#325
2 MbN: Yes a MSELECTN a MOFFN
Voice memo
Available for:
K
X-TG7641 series (page 3)
Recording a voice memo
Y
ou can use the base unit to leave a
voice memo (voice message) for
yourself or someone else (3 minutes
max.). Voice memos can be played back
later with the same operation used to
play back answering system messages.
1 MMEMON
2 After the unit beeps, speak clearly
about 20 cm (8 inches) away from
the microphone.
3 To stop recording, press MnN
(STOP).
Remote operation
U
sing a touch-tone phone, you can call
your phone number from outside and
access the unit to listen to messages or
change answering system settings. The
unit’s voice guidance prompts you to
press certain dial keys to perform
different operations.
Remote access code
A
3-digit remote access code must be
entered when operating the answering
system remotely. This code prevents
unauthorized parties from listening to
your messages remotely. The default
setting is 111.
Important:
R To prevent unauthorized access to
this product, we recommend that you
regularly change the remote code.
1 MMENUN#306
60
For assistance, please visit http://www.panasonic.com/help
Answering System for Landline
2 E
nter the desired 3-digit remote
access code.
3 MSAVEN a MOFFN
Deactivating remote operation
P
ress * in step 2 on “Remote access
code”, page 60.
R The entered remote access code is
deleted.
Using the answering system
r
emotely
1 Dial your landline phone number
from a touch-tone phone.
2 After the greeting message starts,
enter your remote access code.
3 Follow the voice guidance prompts
as necessary or control the unit
using remote commands
(page 61).
4 When finished, hang up.
Voice guidance
n W
hen the English voice guidance
is selected
During remote operation, the unit’s
voice guidance starts and prompts
you to press 1 to perform a specific
operation, or press 2 to listen to
more available operations.
n When the Spanish voice guidance
is selected
To start the voice guidance, press
9. The voice guidance announces
the available remote commands
(page 61).
Note:
R If you do not press any dial keys
within 10 seconds after a voice
guidance prompt, the unit disconnects
your call.
Remote commands
Y
ou can press dial keys to access
certain answering system functions
without waiting for the voice guidance to
prompt you.
Key Operation
1 Repeat message
(
during playback)
*1
2 Skip message
(
during playback)
4 Play new messages
5 Play all messages
9
Stop playback
*
2
Start voice guidance
*3
0 Turn answering system off
*4 Erase currently playing
message
*5 Erase all messages
*# End remote operation
(
or hang up)
*1 If pressed within the first 5 seconds
of a message, the previous
message is played.
*2 For English voice guidance only
*3 For Spanish voice guidance only
Turning on the answering
s
ystem remotely
If the answering system is off, you can
turn it on remotely.
1 Dial your phone number from a
touch-tone phone.
2 Let the phone ring 15 times.
R A long beep is heard.
3 Enter your remote access code
within 10 seconds after the long
beep.
R The greeting message is played
back.
For assistance, please visit http://www.panasonic.com/help
61
Answering System for Landline
R Y
ou can either hang up, or enter
your remote access code again
and begin remote operation
(page 60).
Answering system
s
ettings
Number of rings before the
u
nit answers a call
You can change the number of times the
phone rings Ring count before the
unit answers calls. You can select 2 to 7
rings, or Toll saver.
The default setting is 4 rings.
Toll saver: The unit’s answering
system answers at the end of the 2nd
ring when new messages have been
recorded, or at the end of the 5th ring
when there are no new messages. If you
call your phone from outside to listen to
new messages (page 60), you know that
there are no new messages when the
phone rings for the 3rd time. You can
then hang up without being charged for
the call.
1 MMENUN#211
2 MbN: Select the desired setting. a
MSAVEN a MOFFN
For voice mail service subscribers
I
f you subscribe to a flat-rate service
package that includes Caller ID, call
waiting, voice mail, and unlimited local/
regional/long distance calls, please note
the following:
R To use the voice mail service
provided by your service provider/
telephone company rather than the
unit’s answering system, turn off the
answering system (page 57).
R To use this unit’s answering system
rather than the voice mail service
provided by your service provider/
t
elephone company, please contact
your service provider/telephone
company to deactivate your voice mail
service.
If your service provider/telephone
company cannot do this:
Set this unit’s Ring count
setting so that this unit’s answering
system answers calls before the
voice mail service of your service
provider/telephone company does.
It is necessary to check the number
of rings required to activate the
voice mail service provided by your
service provider/telephone
company before changing this
setting.
Change the number of rings of the
voice mail service so that the
answering system can answer the
call first. To do so, contact your
service provider/telephone
company.
Caller’s recording time
Y
ou can change the maximum message
recording time allowed for each caller.
The default setting is 3 min.
1 MMENUN#305
2 MbN: Select the desired setting. a
MSAVEN a MOFFN
Selecting Greeting only
You can select Greeting only
which sets the unit to announce a
greeting message to callers but not
record messages.
Select Greeting only in step 2 on
“Caller’s recording time”, page 62.
Note:
R When you select Greeting only:
If you do not record your own
message, the unit will play the
pre-recorded greeting-only
62
For assistance, please visit http://www.panasonic.com/help
Answering System for Landline
message asking callers to call
a
gain later.
If you use your own message,
record the greeting-only message
asking callers to call again later
(page 58).
Message alert
Y
ou can select whether or not the
message indicator on the handset
flashes slowly when new messages are
recorded. The default setting is On.
Important:
R If you stored the voice mail access
number (page 64), the message
indicator also flashes for newly
recorded voice mail messages from
the landline (page 65).
1 MMENUN#340
2 MbN: Select the desired setting. a
MSAVEN a MOFFN
Note:
R While message alert is on, battery
operating time is shortened (page 12).
For assistance, please visit http://www.panasonic.com/help
63
Answering System for Landline
Voice mail service for
l
andline
Voice mail is an automatic answering
service offered by your service provider/
telephone company. After you subscribe
to this service, your service provider/
telephone company’s voice mail system
answers calls for you when you are
unavailable to answer the phone or
when your line is busy. Messages are
recorded by your service provider/
telephone company, not your telephone.
Please contact your service provider/
telephone company for details of this
service.
Important:
R To use the voice mail service
provided by your service provider/
telephone company rather than the
unit’s answering system, turn off the
answering system (page 57). For
details, see page 62.
R You need to store the voice mail
access number to activate the
message alert feature (page 63) for
voice mail service.
Storing the voice mail (VM)
a
ccess number
In order to listen to your voice mail
messages, you must dial your service
provider/telephone company’s voice
mail access number. Once you have
stored your voice mail access number,
you can dial it automatically (page 65).
1 MMENUN#331
2 Enter your access number (24 digits
max.). a MSAVEN a MOFFN
Note:
R When storing your voice mail access
number and your mailbox password,
press MPAUSEN to add pauses
(page 25) between the access
n
umber and the password as
necessary. Contact your service
provider/telephone company for the
required pause time.
Example:
1-222-333-4444
VM access
number
Pauses Password
PPPP 8888
To erase the voice mail access
n
umber
1 MMENUN#331
2 Press and hold MCLEARN until all
digits are erased. a MSAVEN a
MOFFN
Voice mail (VM) tone detection
Handset / Base unit
*
1
*1 KX-TG7641 series: page 3
Your service provider/telephone
company sends special signals
(sometimes called “voice mail tones” or
“stutter tones”) to the unit to let you
know you have new voice mail
messages. If you hear a series of dial
tones followed by a continuous dial tone
after you press M
N
on the handset or
press MSP-PHONEN on the base unit,
you have new voice mail messages.
Soon after you hang up a call or after
the phone stops ringing, your unit
checks the phone line to see if new
voice mail messages have been
recorded.
Turn this feature off when:
You do not subscribe to voice mail
service.
Your service provider/telephone
company does not send voice mail
tones.
Your phone is connected to a PBX.
64
For assistance, please visit http://www.panasonic.com/help
Voice Mail Service for Landline
If you are not sure which setting is
r
equired, contact your service provider/
telephone company.
Turning VM tone detection on/off
T
he default setting is On.
1 MMENUN#332
2 MbN: Select the desired setting. a
MSAVEN a MOFFN
Listening to voice mail
m
essages
The unit lets you know that you have
new voice mail messages in the
following ways:
New Voice Mail is displayed on
the handset and base unit
*1
if
message indication service is
available.
The message indicator on the
handset flashes slowly if the message
alert feature is turned on (“Message
alert”, page 63).
*1 KX-TG7641 series: page 3
Handset
1 MM
ENUN#330
R The speakerphone turns on.
2 Follow the pre-recorded instructions.
3 When finished, press MOFFN.
Base unit
*
1
*1 KX-TG7641 series: page 3
To listen to voice mail messages, you
have to dial your voice mail access
number manually.
Note for handset and base unit:
R If the handset and base unit
*1
still
indicate there are new messages
even after you have listened to all
new messages, turn it off by pressing
and holding # until the handset or
base unit
*1
beeps.
R I
f your voice mail service uses voice
mail tones and a message is over 3
minutes long, the unit may not
indicate new messages.
R If your voice mail service uses voice
mail tones, the tones are heard from
any phone connected to the same
line. If you want to use another phone
to listen to voice mail messages, you
have to dial your access number
manually.
*1 KX-TG7641 series: page 3
For assistance, please visit http://www.panasonic.com/help
65
Voice Mail Service for Landline
Intercom
I
ntercom calls can be made:
between handsets
between a handset and the base unit
(KX-TG7641 series: page 3)
Note:
R If you receive an outside call while
talking on the intercom, you hear 2
tones.
To answer the call with the
handset, press MOFFN, then press
M
N.
To answer the call with the base
unit, press MSP-PHONEN 2 times.
(KX-TG7641 series: page 3)
R When paging unit(s), the paged
unit(s) beeps for 1 minute.
Making an intercom call
Handset
1 MM
ENUN a MINTN
2 MbN: Select the desired unit. a
MSELECTN
R To stop paging, press MOFFN.
3 When you finish talking, press
MOFFN.
Base unit
*
1
*1 KX-TG7641 series: page 3
1 Press MINTERCOMN.
R To page a specific handset, enter
the handset number.
R To page all handsets, press 0 or
wait for a few seconds.
R To stop paging, press
MINTERCOMN.
2 When you finish talking, press
MINTERCOMN.
Answering an intercom call
Handset
1 Press M N
to answer the page.
2 When you finish talking, press
MOFFN.
Base unit
*1
*1 KX-TG7641 series: page 3
1 Press MINTERCOMN to answer the
page.
2 When you finish talking, press
MINTERCOMN.
Handset locator
Y
ou can locate a misplaced handset by
paging it.
1 Base unit:
Press MLOCATORN.
R All registered handsets beep for 1
minute.
2 To stop paging:
Base unit:
Press MLOCATORN.
Handset:
n KX-TG7621 series: page 3
Press MOFFN.
n KX-TG7641 series: page 3
Press M
N,
then press MOFFN.
66
For assistance, please visit http://www.panasonic.com/help
Intercom/Locator
Transferring calls,
c
onference calls
Outside calls can be transferred or a
conference call with an outside party can
be made:
between 2 handsets
between a handset and the base unit
(KX-TG7641 series: page 3)
Handset
1 D
uring an outside call, press MINTN
to put the call on hold.
2 MbN: Select the desired unit. a
MSELECTN
3 Wait for the paged party to answer.
R If the paged party does not
answer, press M
N
to return to
the outside call.
4 To complete the transfer:
Press MOFFN.
R The outside call is being routed to
the destination unit.
To establish a conference call:
MMENUN a MbN: Conference
a MSELECTN
R To leave the conference, press
MOFFN. The other 2 parties can
continue the conversation.
R To put the outside call on hold:
MMENUN a MbN: Hold a
MSELECTN
To resume the conference:
MMENUN a MbN: Conference
a MSELECTN
Base unit
*1
*1 KX-TG7641 series: page 3
1 During an outside call, press
MINTERCOMN.
R To page a specific handset, enter
the handset number.
R To page all handsets, press 0 or
wait for a few seconds.
2 W
ait for the paged party to answer.
R If paged party does not answer,
press MINTERCOMN to return to
the outside call.
3 To complete the transfer:
Press MSP-PHONEN.
R The outside call is being routed to
the handset.
To establish a conference call:
Press MCONFN.
R To leave the conference, press
MSP-PHONEN. The other 2 parties
can continue the conversation.
R To put the outside call on hold,
press MHOLDN. To resume the
conference, press MCONFN.
Answering a transferred call
Handset
P
ress M
N
to answer the page.
Base unit
*
1
*1 KX-TG7641 series: page 3
Press MSP-PHONEN to answer the page.
For assistance, please visit http://www.panasonic.com/help
67
Intercom/Locator
Wall mounting
N
ote:
R Make sure that the wall and the fixing
method are strong enough to support
the weight of the unit.
Base unit (KX-TG7621 series:
p
age 3)
1 Lead the AC adaptor cord and
telephone line cord through the hole
in the wall mounting adaptor in the
direction of the arrow.
2 T
uck the telephone line cord inside
the wall mounting adaptor (A).
Connect the AC adaptor cord and
telephone line cord (B).
Hooks
A
B
AC adaptor cord
3 I
nsert the hooks on the wall
mounting adaptor into holes
and
on the base unit.
2
1
2
1
4 A
djust the adaptor to hold the base
unit, then push it in the direction of
the arrow until it clicks into place.
68
For assistance, please visit http://www.panasonic.com/help
Useful Information
5 M
ount the unit on a wall then slide
down to secure in place.
83 mm
(3
1
/
4
inches)
or
102 mm
(4 inches)
AC adaptor cord
2
1
83 mm
(3
1
/4 inches)
102 mm
(4 inches)
2
1
Wall phone plate
To remove the wall mounting adaptor
W
hile pushing down the release levers
(A), remove the adaptor (B).
B
A
A
Base unit (KX-TG7641 series:
p
age 3)
The base unit can be mounted on a wall
by revolving the bracket to “WALL”
position (default: “DESK” stand position).
1 Turn the bracket 180 degrees
counterclockwise in the “WALL”
direction until a click is heard.
Bottom
R T
he bracket cannot be removed.
Do not turn the bracket more than
180 degrees.
2 Tuck in the telephone line cord (A).
Connect the AC adaptor cord and
telephone line cord (B).
A
B
Hooks
For assistance, please visit http://www.panasonic.com/help
69
Useful Information
3 M
ount the unit on a wall then slide
down to secure in place.
83 mm
(3
1
/
4
inches)
or
102 mm
(4 inches)
83 mm
(
3
1
/
4
inches
)
Wall phone plate
102 mm
(4 inches)
1
2
1
2
To stand on a desk
T
urn the bracket 180 degrees clockwise
from the “WALL” position to the “DESK
direction until a click is heard.
Bottom
Charger
D
rive the screws (not supplied) into the
wall.
25.4 mm
(1 inch)
Screws
Hooks
70
For assistance, please visit http://www.panasonic.com/help
Useful Information
Error messages
Display message Cause/solution
Base no power
o
r
No link. Re-connect
base AC adaptor.
or
No link.
R T
he handset has lost communication with the
base unit. Move closer to the base unit and try
again.
R Unplug the base unit’s AC adaptor to reset the
unit. Reconnect the adaptor and try again.
R The handset’s registration may have been
canceled. Re-register the handset (page 48).
R When No link. is displayed during a
power failure, place a handset on the base
unit to supply power to the base unit.
Busy
R N
o cellular phone is registered to the base
unit. Register a cellular phone (page 19).
R The called unit is in use.
R Other units are in use and the system is busy.
Try again later.
R The handset you are using is too far from the
base unit. Move closer and try again.
Call phone company for
y
our access #
R Y
ou have not stored the voice mail access
number. Store the number (page 64).
Check tel line
R T
he supplied telephone line cord has not been
connected yet or not connected properly.
Check the connections (page 10).
R If you do not connect the telephone line cord
and use only cellular lines, set the cellular line
only mode (page 21).
Error!!
R R
ecording was too short. Try again.
R Someone is using a cellular line or headset.
Try again later.
R The phonebook copy is incomplete (page 54).
The cellular phone is disconnected from the
base unit. Make sure that other Bluetooth
devices are not connected to the cellular
phone, and try again.
Failed
R A
lthough the unit tried to connect to the
cellular phone or headset, the connection has
been failed.
Someone is using a cellular line or headset.
Try again later.
Make sure that the cellular phone or
headset is not connected to other Bluetooth
devices.
For assistance, please visit http://www.panasonic.com/help
71
Useful Information
Display message Cause/solution
Invalid
R T
here is no handset registered to the base
unit matching the handset number you
entered.
R The handset is not registered to the base unit.
Register the handset (page 48).
Requires subscription
t
o Caller ID.
R Y
ou must subscribe to a Caller ID service.
Once you receive caller information after
subscribing to a Caller ID service, this
message will not be displayed.
Use rechargeable
b
attery.
R A
wrong type of battery such as Alkaline or
Manganese was inserted. Use only the
rechargeable Ni-MH batteries noted on
page 5, 7.
Troubleshooting
I
f you still have difficulties after following the instructions in this section, disconnect
the base unit’s AC adaptor, then reconnect the base unit’s AC adaptor. Remove the
batteries from the handset, and then insert the batteries into the handset again.
General use
Problem Cause/solution
The handset does not turn
o
n even after installing
charged batteries.
R Place the handset on the base unit or charger to
turn on the handset.
The unit does not work. R M
ake sure the batteries are installed correctly
(page 11).
R Fully charge the batteries (page 11).
R Check the connections (page 10).
R Unplug the base unit’s AC adaptor to reset the
unit. Reconnect the adaptor and try again.
R The handset has not been registered to the base
unit. Register the handset (page 48).
72
For assistance, please visit http://www.panasonic.com/help
Useful Information
Problem Cause/solution
I cannot register a cellular
p
hone to the base unit.
R Depending on the compatibility of the cellular
phone, you may not be able to register it to the
base unit. Confirm that your cellular phone
supports the hands-free profile (HFP) specification.
R Confirm that the Bluetooth feature of your cellular
phone is turned on. You may need to turn this
feature on depending on your cellular phone.
R The Bluetooth technology on your cellular phone
may not be functioning normally. Turn off and on
your cellular phone.
R If your cellular phone is already connected to
another Bluetooth device such as a Bluetooth
headset, turn it off or disconnect it from your
cellular phone.
R Some cellular phones may require you to enter the
base unit PIN to register. Confirm that you entered
the correct PIN.
I cannot connect a cellular
p
hone to the base unit.
R Confirm that your cellular phone is turned on.
R Confirm that your cellular phone is within base unit
range (page 15).
R Depending on the state of the wireless
environment, such as the presence of any
electrical interference, there may be a delay even
if the auto connection feature is turned on. You
can connect to the base unit manually (page 21).
R The cellular phone has not been registered to the
base unit. Register the cellular phone (page 19).
I cannot hear a dial tone. R M
ake sure the base unit’s AC adaptor is
connected properly (page 10).
R Make sure that the CELL 1 or CELL 2 indicator
lights green (page 17).
R Make sure the telephone line cord is connected
properly (page 10).
R Disconnect the base unit from the telephone line
and connect the line to a known working
telephone. If the working telephone operates
properly, contact our service personnel to have the
unit repaired. If the working telephone does not
operate properly, contact your service provider/
telephone company.
The indicator on the
h
andset flashes slowly.
R New messages have been recorded. Listen to the
new messages (page 59).
R New voice mail messages have been recorded.
Listen to the new voice mail messages (page 65).
For assistance, please visit http://www.panasonic.com/help
73
Useful Information
Programmable settings
Problem Cause/solution
The display is in a
l
anguage I cannot read.
R Change the display language (page 18).
I cannot register a handset
t
o a base unit.
R The maximum number of handsets (6) is already
registered to the base unit. Cancel unused
handset registrations from the base unit (page 48).
Battery recharge
Problem Cause/solution
The handset beeps and/or
flashes.
R B
attery charge is low. Fully charge the batteries
(page 11).
I fully charged the batteries,
b
ut
still flashes,
is displayed, or
the operating time
seems to be shorter.
R C
lean the battery ends (
, ) and the charge
c
ontacts with a dry cloth and charge again.
R It is time to replace the batteries (page 11).
Making/answering calls, intercom
Problem Cause/solution
is displayed. R T
he handset is too far from the base unit. Move
closer.
R The base unit’s AC adaptor is not properly
connected. Reconnect AC adaptor to the base unit.
R The handset is not registered to the base unit.
Register it (page 48).
Noise is heard, sound cuts
i
n and out.
R You are using the handset or base unit in an area
with high electrical interference. Re-position the
base unit and use the handset away from sources
of interference.
R Move closer to the base unit.
R If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base
unit and the telephone line jack. Contact your DSL/
ADSL provider for details.
74
For assistance, please visit http://www.panasonic.com/help
Useful Information
Problem Cause/solution
The handset or base unit
d
oes not ring.
R The ringer volume is turned off. Adjust the ringer
volume (page 41, 43).
R When one handset is selected to ring for cellular
calls, other units do not ring. To change the
selection, see page 20.
R Silent mode is turned on for the handset. Turn it off
(page 46).
I cannot make local calls
w
ith the handset or base
unit using a cellular line.
R You need to add your area code when making
cellular calls. Store your area code in order to
automatically add it to the beginning of the 7-digit
phone number when making cellular calls
(page 22).
I cannot make or answer
c
ellular calls with the
handset or base unit.
R Depending on the cellular phone’s compatibility,
you may not be able to make or answer cellular
calls even if the cellular phone is connected to the
base unit.
R Make sure that the CELL 1 or CELL 2 indicator
lights green and the cellular phone is connected to
the base unit (page 21).
R If someone is talking on a cellular call or using the
headset, you cannot use the cellular feature.
There can be only one active Bluetooth connection
at a time.
R The cellular phone is being used separately from
your system.
I can make and answer
c
ellular calls but cannot
hear a sound.
R The Bluetooth technology on your cellular phone
may not be functioning normally. Turn off and on
your cellular phone.
R Disconnect and reconnect the base unit AC
adaptor and try again.
I cannot switch cellular
c
alls from the unit to the
cellular phone.
R Your cellular phone may not support this feature.
Refer to the operating instructions of your cellular
phone.
I cannot make a call using
t
he landline.
R The dialing mode may be set incorrectly. Change
the setting (page 18).
R The handset is too far from the base unit. Move
closer and try again.
R The cellular line only mode is turned on. Turn it off
(page 21).
I cannot make long
d
istance calls.
R Make sure that you have long distance service.
For assistance, please visit http://www.panasonic.com/help
75
Useful Information
Caller ID/Talking Caller ID
Problem Cause/solution
Caller information is not
d
isplayed.
R You must subscribe to Caller ID service. Contact
your service provider/telephone company for
details.
R If your unit is connected to any additional
telephone equipment such as a Caller ID box or
cordless telephone line jack, plug the unit directly
into the wall jack.
R If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base
unit and the telephone line jack. Contact your DSL/
ADSL provider for details.
R The name display service for landline calls may
not be available in some areas. Contact your
service provider/telephone company for details.
R Other telephone equipment may be interfering with
this unit. Disconnect the other equipment and try
again.
Caller information is
d
isplayed or announced
late.
R Depending on your service provider/telephone
company, the unit may display or announce the
caller’s information at the 2nd ring or later.
R Move closer to the base unit.
Caller information is not
a
nnounced.
R The handset or base unit’s ringer volume is turned
off. Adjust it (page 41, 43).
R When one handset is selected to ring for cellular
calls, other units do not announce caller
information. To change the selection, see page 20.
R The Talking Caller ID feature is turned off. Turn it
on (page 43).
R The ring as cell mode is set to On (without
Talking CID). To change the mode, see
page 20.
R The number of rings for the answering system is
set to 2 rings or Toll saver. Select a
different setting (page 62).
R Your unit does not announce caller information if
the base unit or 2 or more handsets are on a
call.
a headset is in use.
The caller list/incoming
p
hone numbers are not
edited automatically.
R The Caller ID number auto edit feature is turned
off. Turn it on and try again (page 44).
R You need to call back the edited number to
activate Caller ID number auto edit.
76
For assistance, please visit http://www.panasonic.com/help
Useful Information
Problem Cause/solution
I cannot dial the phone
n
umber edited in the caller
list.
R The phone number you dialed might have been
edited incorrectly (for example, the long distance
“1” or the area code is missing). Edit the phone
number with another pattern (page 51).
Time on the unit has
s
hifted.
R Incorrect time information from incoming Caller ID
changes the time. Set the time adjustment to
Manual” (off) (page 42).
The 2nd caller’s
i
nformation is not displayed
during an outside call.
R In order to use Caller ID, call waiting, or Call
Waiting Caller ID (CWID), you must first contact
your service provider/telephone company and
subscribe to the desired service.
After subscribing, you may need to contact your
service provider/telephone company again to
activate this specific service, even if you already
subscribed to both Caller ID and Call Waiting with
Caller ID services (CWID).
Using Bluetooth devices
Problem Cause/solution
I cannot copy phonebook
e
ntries from a cellular
phone.
R Confirm that the cellular phone supports Bluetooth
wireless technology.
R Confirm that the cellular phone supports the
Phone Book Access Profile (PBAP) or Object
Push Profile (OPP) specification.
R If the cellular phone is already connected to
another Bluetooth device such as a Bluetooth
headset, turn it off or disconnect it from the cellular
phone.
R Someone is using a cellular line or headset. Try
again later.
R Turn the cellular phone off, then turn it on and try
again.
R If an entry is already stored in the unit’s shared
phonebook, the entry cannot be copied even by
selecting another group.
I cannot have a
c
onversation using the
headset.
R Your Bluetooth headset is not registered. Register
it (page 55).
R Turn your headset off, then turn it on and try again.
Noise is heard during a call
o
n the headset.
R A Bluetooth headset can communicate with the
base unit within a range of approximately 10 m (33
feet). The connection may be subject to
interference from obstructions such as walls or
electronic devices. Move closer to the base unit.
For assistance, please visit http://www.panasonic.com/help
77
Useful Information
Problem Cause/solution
I cannot connect my
h
eadset to the base unit.
R Confirm that your headset is turned on.
R If your headset is already connected to another
Bluetooth device such as your cellular phone,
disconnect the headset from your cellular phone,
then perform the connecting procedure from the
base unit.
R If someone is using a cellular line, you cannot
connect the headset. There can be only one active
Bluetooth connection at a time.
R The headset has not been registered to the base
unit. Register the headset (page 55).
Some headset enhanced
f
eatures are not available.
R The base unit does not support enhanced features
such as Last number redial or Call reject.
An error tone is heard
w
hen I try to program the
Bluetooth feature.
R The bluetooth feature cannot be accessed
immediately after connecting the AC adaptor to
the base unit. Wait a few seconds and try again.
R The headset has not connected to the base unit
yet, even though you performed the connecting
procedure setting. Wait a few seconds and try
again.
Answering system
Problem Cause/solution
The unit does not record
n
ew messages.
R The answering system is turned off. Turn it on
(page 57).
R The answering system does not answer or record
calls from cellular lines.
R The message memory is full. Erase unnecessary
messages (page 59).
R The recording time is set to Greeting only”.
Change the setting (page 62).
R If you subscribe to a voice mail service, messages
are recorded by your service provider/telephone
company, not your telephone. Change the unit’s
number of rings setting or contact your service
provider/telephone company (page 62).
R The answering system will not answer incoming
calls while:
the base unit or 2 or more handsets are on a
cellular call or an intercom call.
a headset is in use.
Caller information is recorded in the caller list.
78
For assistance, please visit http://www.panasonic.com/help
Useful Information
Problem Cause/solution
I cannot operate the
a
nswering system.
R Someone is using the unit. Wait for the other user
to finish.
R A caller is leaving a message. Wait for the caller to
finish.
R The handset is too far from the base unit. Move
closer.
I cannot operate the
a
nswering system remotely.
R The remote access code is not set. Set the remote
access code (page 60).
R You are entering the wrong remote access code. If
you have forgotten your remote access code,
enter the remote access code setting to check
your current code (page 60).
R Press each key firmly.
R The answering system is turned off. Turn it on
(page 61).
R You cannot operate the answering system when
calling a cellular phone registered to the base unit.
Bluetooth PIN
Problem Cause/solution
I cannot remember the PIN. R C
hange the PIN using the following method.
1 MMENUN#619
2 *7000
3 Enter the new 4-digit PIN. a MOKN
4 Enter the new 4-digit PIN again. a MSAVEN a
MOFFN
Liquid damage
Problem Cause/solution
Liquid or other form of
m
oisture has entered the
handset/base unit.
R Disconnect the AC adaptor and telephone line
cord from the base unit. Remove the batteries
from the handset and leave to dry for at least 3
days. After the handset/base unit are completely
dry, reconnect the AC adaptor and telephone line
cord. Insert the batteries and charge fully before
use. If the unit does not work properly, contact an
authorized service center.
Caution:
R T
o avoid permanent damage, do not use a microwave oven to speed up the drying
process.
For assistance, please visit http://www.panasonic.com/help
79
Useful Information
FCC and other information
This equipment complies with Part 68 of the
FCC rules and the requirements adopted by
the ACTA. On the bottom of this equipment
is a label that contains, among other
information, a product identifier in the
format US:ACJ----------.
If requested, this number must be provided
to the telephone company.
L Registration No.............(found on the
bottom of the unit)
L Ringer Equivalence No. (REN).......0.1B
A plug and jack used to connect this
equipment to the premises wiring and
telephone network must comply with the
applicable FCC Part 68 rules and
requirements adopted by the ACTA. A
compliant telephone cord and modular plug
is provided with the product. It is designed
to be connected to a compatible modular
jack that is also compliant.
The REN is used to determine the number
of devices that may be connected to a
telephone line. Excessive RENs on a
telephone line may result in the devices not
ringing in response to an incoming call. In
most but not all areas, the sum of RENs
should not exceed five (5.0). To be certain
of the number of devices that may be
connected to a line, as determined by the
total RENs, contact the local telephone
company. For products approved after July
23, 2001, the REN for the product is part of
the product identifier that has the format
US:AAAEQ##TXXXX. The digits
represented by ## are the REN without a
decimal point (e.g., 03 is a REN of 0.3).
If this equipment causes harm to the
telephone network, the telephone company
will notify you in advance that temporary
discontinuance of service may be required.
But if advance notice isn't practical, the
telephone company will notify the customer
as soon as possible. Also, you will be
advised of your right to file a complaint with
the FCC if you believe it is necessary.
The telephone company may make changes
in its facilities, equipment, operations or
procedures that could affect the operation of
the equipment. If this happens the
telephone company will provide advance
notice in order for you to make necessary
modifications to maintain uninterrupted
service.
If trouble is experienced with this
equipment, for repair or warranty
information, please contact a Factory
Service Center or other Authorized Servicer.
If the equipment is causing harm to the
telephone network, the telephone company
may request that you disconnect the
equipment until the problem is resolved.
Connection to party line service is subject to
state tariffs. Contact the state public utility
commission, public service commission or
corporation commission for information.
If your home has specially wired alarm
equipment connected to the telephone line,
ensure the installation of this equipment
does not disable your alarm equipment. If
you have questions about what will disable
alarm equipment, consult your telephone
company or a qualified installer.
This equipment is hearing aid compatible as
defined by the FCC in 47 CFR Section
68.316.
When you hold the phone to your ear, noise
might be heard in your Hearing Aid. Some
Hearing Aids are not adequately shielded
from external RF (radio frequency) energy. If
noise occurs, use an optional headset
accessory or the speakerphone option (if
applicable) when using this phone. Consult
with your audiologist or Hearing Aid
manufacturer about the availability of
Hearing Aids which provide adequate
shielding to RF energy commonly emitted
by digital devices.
80
For assistance, please visit http://www.panasonic.com/help
Useful Information
WHEN PROGRAMMING EMERGENCY
NUMBERS AND(OR) MAKING TEST
CALLS TO EMERGENCY NUMBERS:
1) Remain on the line and briefly explain to
the dispatcher the reason for the call.
2) Perform such activities in the off-peak
hours, such as early morning or late
evenings.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Privacy of communications may not be
ensured when using this phone.
CAUTION:
Any changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority
to operate this device.
NOTE:
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the
instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
– Reorient or relocate the receiving
antenna.
– Increase the separation between the
equipment and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced
radio/TV technician for help.
Some cordless telephones operate at
frequencies that may cause interference to
nearby TVs and VCRs. To minimize or
prevent such interference, the base of the
cordless telephone should not be placed
near or on top of a TV or VCR. If
interference is experienced, move the
cordless telephone further away from the TV
or VCR. This will often reduce or eliminate
interference.
FCC RF Exposure Warning:
L This product complies with FCC radiation
exposure limits set forth for an
uncontrolled environment.
L To comply with FCC RF exposure
requirements, the base unit must be
installed and operated 20 cm (8 inches)
or more between the product and all
person’s body (excluding extremities of
hands, wrist and feet).
L This product may not be collocated or
operated in conjunction with any other
antenna or transmitter.
L The handset may be carried and operated
with only the specific provided belt-clip.
Other non-tested belt-clips or similar
body-worn accessories may not comply
and must be avoided.
Notice
L FCC ID can be found inside the battery
compartment or on the bottom of the
units.
Compliance with TIA-1083 standard:
Telephone handsets identified with this logo
have reduced noise and interference when
used with T-Coil equipped hearing aids and
cochlear implants.
T
Compatible with
Hearing Aid T-Coil
TIA-1083
For assistance, please visit http://www.panasonic.com/help
81
Useful Information
Guíapida Española
Instalación
Serie KX-TG7641: el diseño de la unidad base es distinto al de la serie KX-TG7621. Consulte
las instrucciones de operación para ver las conexiones y cómo cargar la batería.
Filtro DSL/ADSL*
CARGUE
APROXIMADAMENTE
DURANTE 7 HORAS
Auricular
Cargador
Unidad base
L Use solo el adaptador de corriente Panasonic PNLV226 incluido.
(120 V CA, 60 Hz)
A la toma de
teléfono de
línea única
(RJ11C)
L Use solo el adaptador de
corriente Panasonic
PNLV226 incluido.
L UTILICE SOLO baterías de Ni-MH tamaño AAA
(R03).
L NO utilice baterías Alcalinas, de Manganeso o de
Ni-Cd.
L Compruebe que las polaridades son las correctas
(S, T).
L El modelo ilustrado es el KX-TG7622.
(120 V CA, 60 Hz)
Confirme que
aparezca
Cargando.
Oprima
firmemente
el contacto.
“Clic”
“Clic”
Ganchos
Gancho
Correcto Incorrecto
L El modelo ilustrado es el
KX-TG7622.
SOLO baterías Ni-MH recargables
*Requiere un filtro DSL/ADSL (no incluido) si tiene este tipo de servicio.
82
Para obtener ayuda, visite http://www.panasonic.com/help (solo en ingls)
Guía Rápida Española
Sugerencias de operación
Teclas de función
El auricular incluye 3 teclas de función. Al oprimir una tecla
de función, puede seleccionar la función que aparece
directamente encima de ella en la pantalla.
{
C
}
,
{
MENU
}
,
{
CEL.
}
y otras funciones adicionales se
asignan a las teclas de función. Preste atención a la
pantalla para ver qué funciones están asignadas a las
teclas de función durante la operación del auricular.
Tecla navegadora
Auricular:
{^}
,
{V}
,
{
<
}
, o
{
>
}
: Navegue por diversas listas y
elementos.
?
VOL. (Volumen:
{^}
o
{V}
): Ajuste el volumen del
receptor o el altavoz mientras habla.
{
<
}
CID (identificador de llamadas): Vea la lista de
personas que llamaron.
{
>
}
REDIAL (Remarcación): Vea la lista de
remarcación.
Unidad base (serie KX-TG7641):
{^}
,
{V}
,
{
7
}
o
{
8
}
: Navegue por diversas listas y
elementos.
{^}
o
{V}
(Volumen): Ajuste el volumen del altavoz
mientras habla.
{
7
}
CID (identificador de llamadas): Vea la lista de
personas que llamaron.
{
8
}
REDIAL (Remarcación): Vea la lista de
remarcación.
{
7
}
/
{
8
}
: Repetir u omitir el mensaje durante la
reproducción.
Cambio de idiomas (predeterminado: “
English
”)
Cuando instale las baterías por primera vez, es posible que aparezca
Date and time
Press SELECT
. Oprima
{
OFF
}
para salir.
Idioma de la pantalla
Auricular:
{
MENU
}
(
11
)
s
{
r
}
:
Español
s
{
GUARDA
}
s
{
OFF
}
Unidad base (serie KX-TG7641):
{
DISPLAY
}
s
{
r
}
:
Change language
s
{
6
}
s
{
r
}
:
Español
s
{
6
}
Idioma de la guía de voz
Auricular:
{
MENU
}
(
112
s
{
r
}
:
Español
s
{
GUARDA
}
s
{
OFF
}
CEL.
Auricular
{V}
{^}
{{78}}
Subir volumen
Bajar volumen
Unidad base
Subir volumen
Bajar volumen
{V}
{^}
{<} >}
{
Para obtener ayuda, visite http://www.panasonic.com/help (solo en ingls)
83
Guía Rápida Española
Fecha y hora (Auricular)
1
{
MENU
}
(
1
)
1
2
Introduzca el día, mes y año actuales.
s
{
OK
}
3
Introduzca la hora y minuto actuales (formato de reloj de 24 horas).
4
{
GUARDA
}
s
{
OFF
}
Cómo grabar el mensaje de saludo del contestador de llamadas
para la línea terrestre (auricular)
Si utiliza un mensaje de saludo pregrabado, no es necesario que grabe su propio mensaje de
saludo.
1
{
MENU
}
(
3
)
2
s
{
r
}
:
s
{
SELEC.
}
2
Después de que suene un pitido, sostenga el auricular a una distancia aproximada de
20 cm (8 pulgadas) y hable con claridad en el micrófono (máx. de 2 minutos).
3
Oprima
{
ALTO
}
para dejar de grabar.
s
{
OFF
}
Enlace a celular
Puede usar la unidad para hacer o contestar llamadas usando una línea de teléfono celular.
Sus teléfonos celulares deben tener tecnología inalámbrica Bluetooth
®
compatible con este
producto. Para obtener más detalles, visite nuestro sitio web:
http://www.panasonic.com/link2cell
L
Coloque su teléfono celular cerca de la unidad base. Si su teléfono celular está demasiado
cerca de la unidad base durante la llamada celular, es posible que escuche ruido. Para un
mejor funcionamiento, le recomendamos que coloque su teléfono celular de 0.6 m a 3 m
(2 pies a 10 pies) de la unidad base.
Línea celular
del teléfono celular
Proveedor de servicio
84
Para obtener ayuda, visite http://www.panasonic.com/help (solo en ingls)
Guía Rápida Española
Cómo registrar un teléfono celular con Bluetooth
1
Auricular:
Para CELL 1:
{
MENU
}
(
6241
Para CELL 2:
{
MENU
}
(
6242
L
Después de que el indicador de CELL 1 o CELL 2 comience a parpadear en rojo en la
unidad base, el resto del procedimiento debe completarse en menos de 5 minutos.
2
Su teléfono celular:
Mientras el indicador de CELL 1 o CELL 2 está parpadeando en rojo, siga las instrucciones
de su teléfono celular para entrar al modo de registro.
L
Dependiendo de su teléfono celular, es posible que le pida que introduzca el NIP de la
unidad base (predeterminado:
0000
).
3
Auricular:
Espere a que se emita un pitido largo.
L
Es posible que tarde más de 10 segundos en completar el registro.
L
Cuando el indicador de CELL 1 o CELL 2 se ilumina en verde, esto significa que el
teléfono celular está conectado a la unidad base. Ya está listo para hacer llamadas
regulares de celular.
4
Para seleccionar qué unidad recibe llamadas para la línea celular (predeterminado:
Todo
):
{
OK
}
s
{
r
}
: Seleccione el auricular deseado o
Todo
.
s
{
GUARDA
}
L
Si no se requiere, vaya al paso 5.
5
{
OFF
}
Nota:
L
Asegúrese de que su teléfono celular está configurado para conectar este producto
automáticamente. Consulte las instrucciones de operación de su teléfono celular.
Marcas registradas
L
La marca denominativa y los logotipos de Bluetooth
®
son propiedad de Bluetooth SIG, Inc. y
cualquier uso de dichas marcas por parte de Panasonic Corporation se hace bajo licencia.
Todas las demás marcas comerciales que se identifican en el presente pertenecen a sus
respectivos propietarios.
Enlace a celular
Para obtener ayuda, visite http://www.panasonic.com/help (solo en ingls)
85
Guía Rápida Española
Unidad base: Indicadores CELL 1/CELL 2
Estado Significado
Verde (encendido) Un teléfono celular está conectado. Listo para hacer o recibir
llamadas celulares.
Verde (parpadea) La línea del celular se está usando.
Las entradas del directorio telefónico se están copiando desde
un teléfono celular.
Verde
(parpadea rápidamente)
Se está recibiendo una llamada de celular.
Ámbar (encendido) No hay un teléfono celular conectado a la unidad base.
Ámbar
(parpadea rápidamente)
La unidad base está buscando el teléfono celular registrado.
Rojo (parpadea) Una llamada de celular se pone en espera.
Luz apagada No hay un teléfono celular registrado en la unidad base.
Auricular: enlace a elementos de la pantalla del celular
t
Se está usando una línea de celular.
L
Cuando parpadea: La llamada de celular se pone en espera.
L
Cuando parpadea rápidamente: Se está recibiendo una llamada de celular.
Un teléfono celular está conectado.
*1
Listo para hacer o recibir llamadas celulares.
L
Cuando está apagado: No hay un teléfono celular conectado a la unidad base.
*1 La línea o líneas celulares correspondientes se indican enseguida del
elemento.
uv
Está recibiendo una llamada de celular en esa línea.
Enlace a celular
]
1
2
86
Para obtener ayuda, visite http://www.panasonic.com/help (solo en ingls)
Guía Rápida Española
Cómo conectar o desconectar el teléfono celular
Conexión automática al teléfono celular
La unidad se conecta al teléfono celular a intervalos regulares si se pierde la conexión.
Consulte las instrucciones de operación para cambiar el intervalo (predeterminado:
1 min
).
L
Cuando está usando una línea celular o un audífono con Bluetooth, la unidad base pierde la
conexión de otros dispositivos con Bluetooth (teléfono celular o audífono). Para restablecer
la conexión a los teléfonos celulares automáticamente, deje encendida la conexión
automática.
Cómo conectar o desconectar manualmente el teléfono celular
Cuando haga o conteste llamadas con su teléfono celular, le recomendamos que lo desconecte
de la unidad base; de lo contrario, es posible que no escuche el audio que reciba en su teléfono
celular.
También puede reconectar manualmente el teléfono celular a la unidad base sin esperar a que
la función de conexión automática reanude la conexión.
1
Para conectarlo o desconectarlo:
Para CELL 1:
{
MENU
}
(
6251
(suena un pitido largo.)
Para CELL 2:
{
MENU
}
(
6252
(suena un pitido largo.)
2
{
OFF
}
Modo exclusivo para la línea celular (si no utiliza la línea terrestre)
Si no utiliza la línea terrestre, configure el modo exclusivo para la línea celular para usar esta
unidad en forma más conveniente.
1
{
MENU
}
(
157
2
Para encenderlo:
{
r
}
:
Encendido
s
{
SELEC.
}
s
{
r
}
:
s
{
SELEC.
}
Para apagarlo:
{
r
}
:
Apagado
s
{
SELEC.
}
Operaciones básicas
Cómo hacer y contestar llamadas (Auricular)
Para hacer llamadas de
celular
1
Marque el número telefónico.
s
{
CEL.
}
L
Cuando el modo exclusivo para la línea celular está
configurado, también puede oprimir
{C}
/
{s}
en lugar de
{
CEL.
}
.
L
Cuando solo hay 1 teléfono celular registrado, la unidad
comienza a marcar.
2
Cuando hay 2 teléfonos celulares registrados:
{
r
}
: Seleccione el teléfono celular deseado.
s
{
SELEC.
}
Para hacer llamadas por la
línea terrestre
Marque el número telefónico.
s
{C}
/
{s}
Para contestar llamadas
{C}
/
{s}
Para colgar
{
OFF
}
Para ajustar el volumen del
receptor o del altavoz
Oprima
{^}
o
{V}
repetidamente mientras habla.
Enlace a celular
Para obtener ayuda, visite http://www.panasonic.com/help (solo en ingls)
87
Guía Rápida Española
Cómo hacer y contestar llamadas (Auricular)
Cómo hacer una llamada
usando la lista de
remarcación
1
{
>
}
REDIAL
s
{
r
}
: Seleccione el número telefónico
deseado.
2
Para hacer una llamada celular:
Cuando solo hay 1 teléfono celular registrado:
{
CEL.
}
o
Cuando hay 2 teléfonos celulares registrados:
{
CEL.
}
s
{
r
}
: Seleccione el teléfono celular deseado.
s
{
SELEC.
}
Para hacer una llamada terrestre:
{C}
Cómo hacer y contestar llamadas (Unidad base): Serie KX-TG7641
Para hacer llamadas de
celular
Marque el número telefónico.
s
{
CELL 1
}
/
{
CELL 2
}
L
Cuando el modo exclusivo para la línea celular está
configurado, también puede oprimir
{
SP-PHONE
}
en lugar de
{
CELL 1
}
/
{
CELL 2
}
.
Para hacer llamadas por la
línea terrestre
Marque el número telefónico.
s
{
SP-PHONE
}
Para contestar llamadas
{
SP-PHONE
}
Para colgar
{
SP-PHONE
}
Para ajustar el volumen del
altavoz
Oprima
{^}
o
{V}
repetidamente mientras habla.
Cómo hacer una llamada
usando la lista de
remarcación
1
{
8
}
REDIAL
2
{
r
}
: Seleccione el número telefónico deseado.
3
Para hacer una llamada celular:
{
CELL 1
}
/
{
CELL 2
}
Para hacer una llamada terrestre:
{
SP-PHONE
}
Para ajustar el volumen del timbre (auricular)
Para ajustar el volumen del
timbre del auricular (línea de
celular)
1
Para CELL
1:
{
MENU
}
(
6281
Para CELL
2:
{
MENU
}
(
6282
2
{
r
}
: Seleccione el volumen deseado.
s
{
GUARDA
}
s
{
OFF
}
Para ajustar el volumen del
timbre del auricular (línea
terrestre)
1
{
MENU
}
(
16
)
2
{
r
}
: Seleccione el volumen deseado.
s
{
GUARDA
}
s
{
OFF
}
Operaciones básicas
88
Para obtener ayuda, visite http://www.panasonic.com/help (solo en ingls)
Guía Rápida Española
Para ajustar el volumen del timbre (auricular)
Para ajustar el volumen del
timbre de la unidad base
(línea celular)
1
Para CELL
1:
{
MENU
}
(*
6281
Para CELL
2:
{
MENU
}
(*
6282
2
{
r
}
: Seleccione el volumen deseado.
s
{
GUARDA
}
s
{
OFF
}
Para ajustar el volumen del
timbre de la unidad base
(línea terrestre)
1
{
MENU
}
(*
16
)
2
{
r
}
: Seleccione el volumen deseado.
s
{
GUARDA
}
s
{
OFF
}
Directorio telefónico compartido
Para añadir entradas
Auricular:
1
{
C
}
s
{
AÑAD.
}
2
Introduzca el nombre de la persona (máx. 16 caracteres).
s
{
OK
}
3
Introduzca el número telefónico de la persona (máx. 24
dígitos).
s
{
OK
}
4
{
r
}
: Seleccione el grupo deseado.
s
{
SELEC.
}
2 veces
s
{
OFF
}
Para hacer llamadas
Auricular:
1
{
C
}
s
{
r
}
: Seleccione la entrada deseada.
2
Para hacer una llamada celular:
Cuando solo hay 1 teléfono celular registrado:
{
CEL.
}
o
Cuando hay 2 teléfonos celulares registrados:
{
CEL.
}
s
{
r
}
: Seleccione el teléfono celular deseado.
s
{
SELEC.
}
Para hacer una llamada terrestre:
{C}
Unidad base (serie KX-TG7641):
1
{
C
}
s
{
r
}
: Seleccione la entrada deseada.
2
Para hacer una llamada celular:
{
CELL 1
}
/
{
CELL 2
}
Para hacer una llamada terrestre:
{
SP-PHONE
}
Contestador de llamadas de la línea terrestre (unidad base)
Contestador encendido/
apagado
Oprima
{
ANSWER ON/OFF
}
para encender y apagar el
contestador de llamadas.
Para escuchar mensajes
{
6
}
Contestador de llamadas de la línea terrestre (auricular)
Para escuchar mensajes
Para escuchar mensajes nuevos:
{
MENU
}
s
{
REPRO.
}
o
{
MENU
}
(
323
Para escuchar todos los mensajes:
{
MENU
}
(
324
Operaciones básicas
Para obtener ayuda, visite http://www.panasonic.com/help (solo en ingls)
89
Guía Rápida Española
Cómo usar dispositivos Bluetooth
Copiado de entradas del directorio telefónico desde un teléfono celular con Bluetooth
(transferencia del directorio telefónico)
Puede copiar entradas del directorio telefónico desde los teléfonos celulares registrados o
desde otros teléfonos celulares (no registrados) al directorio telefónico compartido de la
unidad.
Copiado de entradas del directorio telefónico desde un teléfono celular con
Bluetooth
1
Auricular:
{
MENU
}
(
618
2
Auricular:
Para copiar desde teléfonos celulares registrados:
{
r
}
: Seleccione el teléfono celular deseado.
s
{
SELEC.
}
L
Los elementos copiados se almacenan en el grupo (
Cel. 1
o
Cel. 2
) en el que
está registrado el teléfono celular.
Para copiar desde otros teléfonos celulares (no registrados):
{
r
}
:
Otro celular
s
{
SELEC.
}
s
{
r
}
: Seleccione el grupo al que desea copiar.
s
{
SELEC.
}
3
Cuando aparezca
Transf. datos del directorio del celular
:
Vaya al paso 4.
Cuando aparezca el menú
Selec. modo
:
{
r
}
: Seleccione
Auto
o
Manual
.
s
{
SELEC.
}
Auto
: Descargue todas las entradas del teléfono celular automáticamente. Vaya al paso
5.
Manual
: Copie las entradas que seleccionó.
L
El menú
Selec. modo
aparece solo cuando el teléfono celular soporta PBAP (Perfil de
Acceso a Directorio Telefónico) para la conexión Bluetooth.
4
Teléfono celular:
Siga las instrucciones de su teléfono celular para copiar las entradas del directorio
telefónico.
L
Para otros teléfonos celulares (no registrados), necesita buscar y seleccionar la unidad
base. Es posible que requiera el NIP de la unidad base (predeterminado:
0000
).
L
Las entradas que se están copiando aparecen en el auricular.
5
Auricular:
Espere a que aparezca
Completo
.
s
{
OFF
}
90
Para obtener ayuda, visite http://www.panasonic.com/help (solo en ingls)
Guía Rápida Española
Cómo usar un audífono Bluetooth (opcional) para llamadas por la línea terrestre
Al registrar un audífono Bluetooth en la unidad base, podrá tener conversaciones inalámbricas
a manos libres para llamadas por la línea terrestre.
L
La conexión del audífono con Bluetooth no está disponible mientras alguien se encuentra
usando la línea celular.
Cómo registrar un audífono en la unidad base
1
Su audífono:
Configure su audífono en modo de registro.
L
Consulte las instrucciones de operación de su
audífono.
2
Auricular:
{
MENU
}
(
621
3
Introduzca el NIP de su audífono.
L
Por lo general, el NIP predeterminado es
0000
. Consulte las instrucciones de
operación del audífono.
4
Oprima
{
OK
}
, y después espere a que se emita un pitido largo.
s
{
OFF
}
L
Cuando el indicador HEADSET de la unidad base se ilumina en verde, usted está listo
para usar el audífono.
Cómo operar un audífono inalámbrico con Bluetooth usando una línea terrestre
Consulte las instrucciones de operación de su audífono para ver cómo funciona.
N
Cómo contestar llamadas de la línea terrestre con su audífono
Para contestar una llamada de línea terrestre, encienda su audífono. Para ello, consulte las
instrucciones de operación de su audífono.
Cuando termine de hablar, apague su audífono. Para ello, consulte las instrucciones de
operación de su audífono.
L
Si no puede colgar la llamada usando su audífono;
oprima
{}
(STOP) en la unidad base. (serie KX-TG7621)
oprima
{
SP-PHONE
}
en la unidad base 2 veces. (serie KX-TG7641)
N
Cómo cambiar entre la unidad base y su audífono
Puede cambiar entre la unidad base y su audífono:
durante una llamada por una línea terrestre con el altavoz de la unidad base.
(serie KX-TG7641)
durante una llamada de intercomunicador entre la unidad base y el auricular.
(serie KX-TG7641)
mientras escucha los mensajes grabados en el contestador de llamadas de la unidad base.
*1
Serie KX-TG7641
Para cambiar a su audífono:
Oprima
{
HEADSET
}
en la unidad base.
Para cambiar a la unidad base:
Oprima
{
SP-PHONE
}
en la unidad base.
*1 Serie KX-TG7621
L
Solo puede cambiar entre la unidad base y su audífono. Encienda el audífono. Para ello,
consulte las instrucciones de operación de su audífono.
Cómo usar dispositivos Bluetooth
Registro
Registre usando el auricular.
Para obtener ayuda, visite http://www.panasonic.com/help (solo en ingls)
91
Guía Rápida Española
Preguntas frecuentes
Pregunta Causa y solución
¿Por qué aparece
_
?
L
El auricular está demasiado lejos de la unidad base. Acérquelo.
L
El adaptador para corriente de la unidad base no está
conectado correctamente. Conecte de nuevo el adaptador para
corriente a la unidad base.
L
El auricular no está registrado en la unidad base. Regístrelo.
1
Auricular:
{
MENU
}
(
13
)
2
Unidad base:
Oprima y mantenga oprimido
{
LOCATOR
}
durante aproximadamente 5 segundos hasta que suene el
tono de registro.
3
Auricular:
Oprima
{
OK
}
, y después espere hasta que
suene un pitido largo.
¿Por qué no es posible
registrar un teléfono
celular a la unidad base?
L
Dependiendo de la compatibilidad del teléfono celular, es
posible que no pueda registrarlo en la unidad base. Para
obtener más información, visite
http://www.panasonic.com/link2cell
L
Confirme que la función de Bluetooth de su teléfono celular esté
encendida. Es posible que necesite encender esta función
dependiendo de su teléfono celular.
¿Por qué no es posible
escuchar el tono de
marcación? (línea de
celular)
L
Asegúrese de que la luz indicadora de CELL 1 o CELL 2 se
ilumine en verde y de que el teléfono celular esté conectado a la
unidad base.
L
El teléfono celular no se ha registrado en la unidad base.
Regístrelo.
¿Cómo se incrementa el
nivel de volumen del
auricular?
L
Oprima la tecla de navegación
{^}
repetidamente mientras
habla.
¿Por qué hay ruido o se
corta la conversación?
L
Trate de reubicar la unidad base de forma que se minimice la
distancia al auricular.
L
Si ocurre el mismo problema aunque el auricular se encuentre
enseguida de la unidad base, llame a soporte al cliente de
Panasonic al 1-800-211-PANA (1-800-211-7262).
¿Es posible añadir otro
auricular accesorio a mi
unidad base?
L
Sí, puede añadir hasta 6 auriculares (incluyendo los que se
venden con su unidad base) a una sola unidad base.
L
Para adquirir auriculares accesorios adicionales
(KX-TGA410/KX-TGA660), visite
http://www.panasonic.com
o llame al 1-800-332-5368. Los usuarios TTY (usuarios con
impedimentos auditivos o del habla) pueden llamar al 1-866-
605-1277.
92
Para obtener ayuda, visite http://www.panasonic.com/help (solo en ingls)
Guía Rápida Española
Pregunta Causa y solución
¿Es posible mantener
cargando las baterías
todo el tiempo?
L
Puede dejar el auricular en la unidad base o el cargador en
cualquier momento. Esto no daña las baterías.
¿Cómo se contestan las
llamadas en espera
(segunda llamada)?
L
Oprima
{
CALL WAIT
}
cuando escuche el tono de llamada en
espera.
Para obtener más información acerca del registro, visite
http://www.panasonic.com/RegisterYourHandset
(solo en inglés)
Preguntas frecuentes
Para obtener ayuda, visite http://www.panasonic.com/help (solo en ingls)
93
Guía Rápida Española
Customer services
Customer Services Directory (United States and Puerto Rico)
Obtain Product Information and Operating Assistance; locate your nearest
Dealer or Service Center; purchase Parts and Accessories; or make Customer
Service and Literature requests by visiting our Web Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo
You may also contact us directly at: 1-800-211-PANA (1-800-211-7262),
Monday - Friday 9 am to 9 pm; Saturday - Sunday 10 am to 7 pm, EST.
TTY users (hearing or speech impaired users) can call 1-877-833-8855.
TTY users (hearing or speech impaired users) can call 1-866-605-1277.
Purchase Parts, Accessories and Instruction Books online for all
Panasonic Products by visiting our Web Site at:
http://www.pstc.panasonic.com
or, send your request by E-mail to:
npcparts@us.panasonic.com
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday - Friday 9 am to 9 pm, EST.)
Panasonic Service and Technology Company
20421 84th Avenue South, Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express, and
Personal Checks.)
Accessory Purchases (United States and Puerto Rico)
94
For assistance, please visit http://www.panasonic.com/help
Appendix
Warranty (For United States and Puerto Rico)
PANASONIC CORPORATION OF NORTH AMERICA
One Panasonic Way, Secaucus, New Jersey 07094
Limited Warranty Coverage
If your product does not work properly because of a defect in materials or
workmanship, Panasonic Corporation of North America (referred to as “the
warrantor”) will, for the length of the period indicated on the chart below, which
starts with the date of original purchase (“Limited Warranty period”), at its
option either (a) repair your product with new or refurbished parts, or
(b) replace it with a new or a refurbished product. The decision to repair or
replace will be made by the warrantor.
Parts Labor
One (1) Year One (1) Year
During the “Labor” Limited Warranty period there will be no charge for labor.
During the “Parts” Limited Warranty period, there will be no charge for parts.
You must mail-in your product prepaid during the Limited Warranty period. This
Limited Warranty excludes both parts and labor for batteries, antennas, and
cosmetic parts (cabinet). This Limited Warranty only applies to products
purchased and serviced in the United States or Puerto Rico. This Limited
Warranty is extended only to the original purchaser and only covers products
purchased as new.
For assistance in the continental United States and Puerto Rico in obtaining
repairs please ship the product prepaid to:
PSTC (Panasonic) Exchange Center,
4900 George McVay Drive, Suite B Door #12, McAllen, TX 78503
panacare@us.panasonic.com
When shipping the unit carefully pack in a padded shipping carton, include all
accessories, and send it prepaid. Include a letter detailing the complaint, a
return address and provide a day time phone number where you can be
reached. P.O. Boxes are not acceptable. Keep the tracking number for your
records. A copy of valid registered receipt is required under the 1 year parts
and labor Limited Warranty.
For Limited Warranty service for headsets if a headset is included with this
product please follow instructions above.
IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE
PURCHASER WILL BE REQUIRED TO FURNISH A SALES
RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE,
A
MOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE
CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH
PROOF OF PURCHASE.
Panasonic Telephone Products
Limited Warranty
Ship-In Service
For assistance, please visit http://www.panasonic.com/help
95
Appendix
Limited Warranty Limits And Exclusions
This Limited Warranty ONLY COVERS failures due to defects in materials or
workmanship, and DOES NOT COVER normal wear and tear or cosmetic
damage. The Limited Warranty ALSO DOES NOT COVER damages which
occurred in shipment, or failures which are caused by products not supplied by
the warrantor, or failures which result from accidents, misuse, abuse, neglect,
bug infestation, mishandling, misapplication, alteration, faulty installation, set-
up adjustments, misadjustment of consumer controls, improper maintenance,
power line surge, lightning damage, modification, introduction of sand, humidity
or liquids, commercial use such as hotel, office, restaurant, or other business or
rental use of the product, or service by anyone other than a Factory Service
Center or other Authorized Servicer, or damage that is attributable to acts of
God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER
“LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM
THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF
THIS LIMITED WARRANTY. (As examples, this excludes damages for lost
time, lost calls or messages, cost of having someone remove or re-install an
installed unit if applicable, travel to and from the servicer. The items listed are
not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED
WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY,
ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied warranty lasts,
so the exclusions may not apply to you.
This Limited Warranty gives you specific legal rights and you may also have
other rights which vary from state to state. If a problem with this product
develops during or after the Limited Warranty period, you may contact your
dealer or Service Center. If the problem is not handled to your satisfaction, then
write to the warrantor’s Consumer Affairs Department at the addresses listed
for the warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED
WARRANTY, ARE YOUR RESPONSIBILITY.
L Carefully pack your unit, preferably in the original carton.
L Attach a letter, detailing the symptom.
L Send the unit to PSTC (Panasonic) Exchange Center, prepaid and
adequately insured.
L Do not send your unit to Panasonic Corporation of North America
listed on the back cover or to executive or regional sales offices. These
locations do not repair consumer products.
When you ship the product
96
For assistance, please visit http://www.panasonic.com/help
Appendix
Index
# 3
-way conference: 27
A Additional handset: 48
Alarm: 46
Answering calls: 25, 32
Answering system
Call screening: 57
Erasing messages: 59, 60, 61
Greeting message: 58
Greeting only: 62
Listening to
messages: 58, 59, 61
MEMO: 60
Number of rings: 62
Recording time: 62
Remote access code: 60
Remote operation: 60
Ring count: 62
Toll saver: 62
Turning on/off: 57, 61
Auto talk: 25
B Battery: 11, 12
Belt clip: 15
Bluetooth wireless technology
Cellular phone (Link to cell): 19
Headset: 55
Phonebook transfer: 54
Booster (Clarity booster): 26
C Call block: 47
Call share: 27, 33
Call waiting: 26, 33
Call Waiting Caller ID: 26, 33
Caller ID number auto edit: 52
Caller ID service: 49
Caller list: 50
Caller list edit: 51
Cellular calls: 24, 31
Cellular phone
Deregistration: 23
Registration: 19
Chain dial: 38
CID (Caller ID): 50
Conference calls: 67
Control type: 14, 15
Customer support: 44
D D
ate and time: 17
Dialing mode: 18
Direct command code: 39
Display
Contrast: 43, 45
Language: 18
E Eco mode: 12
Equalizer: 27
Error messages: 71
F Flash: 26, 33
G Groups: 36, 50
H Handset
Deregistration: 48
Locator: 66
Name: 47
Registration: 48
Hold: 25, 32
I Intercom: 66
K Key tone: 44
L Landline calls: 24, 31
Line mode: 44
Link to cell
Area code: 22
Auto connection: 21
Cellular line only mode: 21
Cellular line selection: 22
Connection: 21
Ring as cell mode: 20
Select unit to ring: 20
M Making calls: 24, 31
Missed calls: 49
Mute: 26, 33
P Pause: 25, 31
Phonebook: 35
PIN: 22
Power failure (power back-up
operation): 28
R Redialing: 24, 31
Ringer ID: 50
Ringer tone: 41, 43, 50
Rotary/pulse service: 26
S Silent mode: 46
SP-PHONE (Speakerphone): 24
T Talking caller ID: 49
Temporary tone dialing: 26, 33
Time adjustment: 42
97
Index
Transferring calls: 67
T
roubleshooting: 72
TTY: 94
V VM (Voice mail): 64
Voice guidance language: 18
Voice mail: 62, 64
Volume
Receiver: 24
Ringer (Base unit): 32, 41, 43
Ringer (Handset): 25, 41, 43
Speaker: 24, 31
W Wall mounting: 68
98
Index
99
Notes
1 Reconnect AC adaptor to the base unit.
2 Check if telephone line cord is connected.
3 Use rechargeable Ni-MH batteries.
(Alkaline/Manganese/Ni-Cd batteries CANNOT be used.)
4 Read troubleshooting page in the Operating Instructions.
If your product is not working properly. . .
IMPORTANT!
Visit our Web site: http://www.panasonic.com/help
L
FAQ and troubleshooting hints are available.
For your future reference
W
e recommend keeping a record of the following information to assist with any repair
under warranty.
Serial No. Date of purchase
(found on the bottom of the base unit)
Name and address of dealer
Attach your purchase receipt here.
One Panasonic Way, Secaucus, New Jersey 07094
© Panasonic System Networks Co., Ltd. 2010
Printed in Malaysia
*TG7622*
*TG7622*
PNQX3168YA TT1210MG1011
92

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic KX-TG7624 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic KX-TG7624 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info