– Stop the alarm sound. (page 32)
– Stop paging. (page 51)
n When the NR indicator flashes slowly in
standby mode, you can:
– Listen to new messages.
*1
(page 44)
– Read new SMS messages. (page 40)
– View the caller list when there are
missed calls. (page 37)
To activate these features, their Smart
Function Key must be “On”. (page 17)
*1 KX-TG6821 series: page 3
Using the Smart Function Key
(NR key)
When the NR indicator flashes rapidly/slowly,
press M
N.
R The above features can be activated
depending the situation.
R If you answer a call using the Smart
Function Key, the speakerphone is
activated.
R Even if the handset is placed on the base
unit or charger, the feature can be
activated. You can talk or listen to new
messages
*1
without lifting up the handset. If
you want to perform further operations, lift
up the handset.
R When the unit has new messages
*1
, new
SMS messages, and missed calls, the unit
can be operated to play the new messages
first, show the new SMS messages next,
and then show the missed calls.
*1 KX-TG6821 series: page 3
Note:
R While key lock is on (page 21), incoming
calls can be answered, but the following
features are disabled even when the NR
indicator flashes slowly.
– Listen to new messages.
*1
(page 44)
– Read new SMS messages. (page 40)
– View the caller list when there are
missed calls. (page 37)
*1 KX-TG6821 series: page 3
Setting the Smart Function Key
The Smart Function Key for the following
features must be “On”.
– “New Message”
*1
(Default: On)
– “New SMS” (Default: On)
– “Missed Call” (Default: Off)
The settings can be set for each handset.
*1 KX-TG6821 series: page 3
1 M
N#278
2 MbN: Select the desired setting and press
M
N.
R “
” is displayed next to the selected
features.
R To cancel a selected feature, press
M
N again. “ ” disappears.
3 MOKN a MeN
Note:
R If the NR indicator flashes when the
handset is not placed on the base unit or
charger, battery consumption is faster than
usual.
One touch eco mode
When the handset is on the base unit, the
base unit transmission power is reduced up to
99.9 % if only one handset is registered.
Even when the handset is not on the base unit
or several handsets are registered, the base
unit transmission power in standby mode can
be reduced up to 90 % by activating one touch
eco mode.
You can turn on/off one touch eco mode by
just pressing MR/ECON. The default setting is
“Normal”.
– When the one touch eco mode is on: “Low”
is temporarily displayed and
is shown
on the handset display instead of
.
– When the one touch eco mode is off:
“Normal” is temporarily displayed and
goes off from the handset display.
Note:
R When there is another cordless phone
nearby and it is in use, the base unit
transmission power may not be reduced.
R Activating one touch eco mode reduces the
range of the base unit in standby mode.
R If you set the repeater mode to “On” (page
35):
– One touch eco mode is cancelled.
17
Getting Started
