n Weekly:
MbN: Select the desired day of the week
and press MSelectN. a MOKN
5 Set the desired time.
6 *: Select “AM” or “PM”. a MOKN
7 Enter a text memo (30 characters max.).
a MOKN
8 MbN: Select the desired alarm tone. a
MSelectN
R We recommend selecting a different
ringer tone from the one used for
outside calls.
9 MbN: Select the desired snooze setting.
a MSelectN
10 MSelectN a MOFFN
Note:
R Press MStopN to stop the alarm completely.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
R Press any dial key or MSnoozeN to stop the
sound but keep the snooze function
activated.
R If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.
Silent mode
Silent mode allows you to select a period of
time during which the handset will not ring for
outside calls. This feature is useful for time
periods when you do not want to be disturbed,
for example, while sleeping. Silent mode can
be set for each handset.
Using the phonebook’s group feature
(page 18), you can also select groups of
callers whose calls override silent mode and
ring the handset (Caller ID subscribers only).
Important:
R Make sure the unit’s date and time setting
is correct (page 12).
R If you have set the alarm, the alarm sounds
even if the silent mode is turned on.
Turning silent mode on/off
1 MMenuN (right soft key) #238
2 MbN: Select the desired setting. a MSaveN
R If you select “Off”, press MOFFN to
exit.
3 Enter the desired hour and minute you
wish to start this feature.
4 *: Select “AM” or “PM”. a MOKN
5 Enter the desired hour and minute you
wish to end this feature.
6 *: Select “AM” or “PM”.
7 MSaveN a MOFFN
Changing the start and end time
1 MMenuN (right soft key) #237
2 Continue from step 3, “Turning silent
mode on/off”, page 28.
Selecting groups to bypass silent
mode
1 MMenuN (right soft key) #241
2 Select your desired groups by pressing
1 to 9.
R “
” is displayed next to the selected
group numbers.
R To cancel a selected group, press the
same dial key again. “
” disappears.
3 MSaveN a MOFFN
Call block
This feature allows the unit to reject calls when:
– the unit receives a call from a phone
number stored in the call block list as
unwanted (“Storing unwanted callers”,
page 29).
– the unit receives a call without phone
number (“Blocking incoming calls without
phone number”, page 29).
When a call is received, the unit rings for a
short time
*1
while the caller is being identified.
If the phone number matches an entry in the
call block list, the unit emits no sound to the
28
For assistance, please visit http://www.panasonic.com/help
Programming
