594788
12
Verklein
Vergroot
Pagina terug
1/214
Pagina verder
Operating Instructions
High Definition Video Camera
Model No.
HC-V550
Model No.
HC-V250
HC-V550M HC-V230
HC-V530
Please read these instructions carefully before using this product,
and save this manual for future use.
SQT0025
until
2014/1/24
- 2 -
About the recording format for
recording motion pictures
You can select from AVCHD
*1
, MP4 or iFrame
recording formats to record motion pictures
using this unit.
(l 70)
*1 It is compatible with the AVCHD
Progressive (1080/50p).
AVCHD:
It is suitable for viewing on a high-definition TV
or for saving to disc
*2
.
*2 The following methods are available for
saving an image recorded in 1080/50p:
j Copy the image to a disc using the
supplied software HD Writer LE 2.1.
j Copy the image to a Panasonic Blu-ray
disc recorder that supports AVCHD
Progressive.
MP4:
This is a recording format suitable for playing
back or editing on a PC.
It is not compatible with motion pictures
recorded in AVCHD format.
iFrame:
This is a recording format suitable for playing
back or editing on a Mac (iMovie etc.).
It is not compatible with motion pictures
recorded in AVCHD format.
Indemnity about recorded
content
Panasonic does not accept any responsibility
for damages directly or indirectly due to any
type of problems that result in loss of recording
or edited content, and does not guarantee any
content if recording or editing does not work
properly. Likewise, the above also applies in a
case where any type of repair is made to the
unit (including any other non-built-in memory
related component).
Handling of built-in memory
[HC-V550M]
This unit is equipped with the built-in memory.
When using this component, pay attention to
the following points.
Back up data periodically.
The built-in memory is temporary storage. In
order to avoid erasing data due to static
electricity, electromagnetic waves, breakage,
and failures, back up the data to a PC or DVD
disc. (l 174)
Access lamp [ACCESS] (l 6) illuminates
while the SD card or built-in memory is being
accessed (initialisation, recording, playback,
deleting etc.). Do not perform the following
operations when the lamp illuminates. It may
damage the built-in memory or cause a
malfunction in the unit.
j Turn the unit off (remove the battery)
j Insert and remove the USB cable
j Expose the unit to vibrations or shock
About disposing of or giving away this unit.
(l 200)
Read this first
- 3 -
About Condensation (When
the lens or the LCD monitor is
fogged up)
Condensation occurs when there is a change in
temperature or humidity, such as when the unit
is taken from outside or a cold room to a warm
room. Please be careful, as it may cause the
lens or LCD monitor to become soiled, moldy,
or damaged.
When taking the unit to a place which has a
different temperature, if the unit is accustomed
to the room temperature of the destination for
about one hour, condensation can be
prevented. (When the difference in temperature
is severe, place the unit in a plastic bag or the
like, remove air from the bag, and seal the bag.)
When condensation has occurred, remove the
battery and/or the AC adapter and leave the
unit like that for about one hour. When the unit
becomes accustomed to the surrounding
temperature, fogginess will disappear naturally.
Cards that you can use with
this unit
SD Memory Card, SDHC Memory Card and
SDXC Memory Card
4 GB or more Memory Cards that do not have
the SDHC logo or 48 GB or more Memory
Cards that do not have the SDXC logo are
not based on SD Memory Card
Specifications.
Refer to page 14 for more details on SD
cards.
For the purposes of these
operating instructions
SD Memory Card, SDHC Memory Card and
SDXC Memory Card are referred to as the
“SD card”.
The smartphone and tablet are indicated as
“smartphone”.
Function that can be used for Motion Picture
Recording Mode:
Function that can be used for Still Picture
Recording Mode:
Function that can be used for the Playback
Mode:
Function that can be used for the Playback
Mode (motion pictures only):
Function that can be used for the Playback
Mode (still pictures only):
Scene(s) recorded in the recording format
[AVCHD]: “AVCHD scene(s)”
Scene(s) recorded in the recording format
[MP4/iFrame], scene(s) saved in
MP4 (Low Quality): “MP4/iFrame scene(s)”
Pages for reference are indicated by an
arrow, for example: l 00
These operating instructions are designed for
use with models , ,
, and .
Pictures may be slightly different from the
original.
The illustrations used in these operating
instructions show model ,
however, parts of the explanation refer to
different models.
Depending on the model, some functions
are not available.
, and
correspond to Wi-Fi
®
functions.
Features may vary, so please read carefully.
Not all models may be available depending
on the region of purchase.
HC-V550
HC-V550M
HC-V530
HC-V250
HC-V230
HC-V550
HC-V550
HC-V250
- 4 -
Read this first ................................................. 2
Preparation
Names and Functions of Main Parts ............ 6
Power supply................................................ 10
Inserting/removing the battery ............... 10
Charging the battery .............................. 11
Charging and recording time ................. 12
Recording to a card ..................................... 14
Cards that you can use with this unit..... 14
Inserting/removing an SD card .............. 15
Turning the unit on/off ................................. 16
Selecting a mode ......................................... 17
Switching this unit between Recording
Mode and Playback Mode ..................... 17
Switching this unit between
Motion Picture Recording Mode and
Still Picture Recording Mode ................. 17
How to use the touch screen ...................... 18
About the Touch Menu........................... 19
Setting date and time................................... 20
Basic
Before recording .......................................... 21
Selecting a media to record
[HC-V550M]................................................... 22
Recording motion pictures ......................... 23
Recording still pictures ............................... 25
Recording still pictures in
Motion Picture Recording Mode ............ 26
Motion picture/Still picture playback ......... 27
Using the menu screen ............................... 30
Using the Setup Menu ................................. 31
Advanced (Recording)
Using the zoom ............................................ 41
Zoom ratio during the Still Picture
Recording Mode .................................... 41
Level Shot Function
[HC-V550]/[HC-V550M]/[HC-V530] .............. 42
Image Stabilizer Function
[HC-V250]/[HC-V230].................................... 43
Changing the Recording Mode................... 44
Intelligent Auto ....................................... 45
Intelligent Auto Plus ............................... 47
Creative Control ..................................... 47
Scene Mode........................................... 51
Endless Loop Recording........................ 53
Stop Motion Animation Assist
[HC-V550]/[HC-V550M]/[HC-V530]........ 54
Manual recording .........................................55
White Balance........................................ 56
Manual shutter speed/iris adjustment .... 57
Manual Focus adjustment...................... 58
Recording with the Touch Function ...........59
Touch function icons .............................. 59
Recording functions of operation icons ....65
Operation icons...................................... 65
Recording functions of menus ...................69
Advanced (Playback)
Playback Operations....................................79
Motion picture playback using
operation icon ........................................ 79
Creating still picture from
motion picture ........................................ 80
Highlight & Time Frame Index ............... 81
Repeat Playback.................................... 81
Resuming the previous playback ........... 82
Zooming in on a still picture during
playback (Playback zoom) ..................... 82
Various playback functions.........................83
Playing back motion pictures/
still pictures by date ............................... 83
Highlight Playback ................................. 84
Manual Edit ............................................ 90
Baby Calendar ....................................... 93
Changing the playback settings and
playing back the slide show ................... 95
Playing back still pictures recorded in
Stop Motion Animation Assist Mode
as a slide show
[HC-V550]/[HC-V550M]/[HC-V530]........ 96
Deleting scenes/still pictures......................97
Deleting part of a scene (AVCHD) ......... 99
Dividing a scene (AVCHD) ................... 100
Dividing a scene to partially delete
(MP4/iFrame) ....................................... 101
Protecting scenes/still pictures............. 102
Convert to MP4 ...........................................103
Relay scene combining [HC-V550M] ........104
Contents
- 5 -
Watching Video/Pictures on your TV ....... 106
Connecting with a HDMI mini cable..... 109
Playback using VIERA Link ...................... 110
Copy/Dubbing
Copying between SD card and Built-in
Memory [HC-V550M].................................. 112
Copying/playing back with a USB HDD ... 115
Preparing for copying/playing back ..... 115
Simple copy ......................................... 117
Copy selected files .............................. 118
Playing back the USB HDD ................. 119
Dubbing with a Blu-ray disc recorder,
video device, etc. ....................................... 120
Using the Eye-Fi™ card............................. 124
Wi-Fi [HC-V550]/[HC-V550M]/[HC-V250]
Wi-Fi
®
function ........................................... 127
[Remote Ctrl] .............................................. 129
Preparations before using
[Remote Ctrl] ....................................... 129
Using [Remote Ctrl] with
a direct connection .............................. 131
Using [Remote Ctrl] with
a wireless access point connection ..... 132
About [Remote Ctrl] ............................. 133
[Baby Monitor]............................................ 135
Preparations before using
[Baby Monitor] ..................................... 135
Using [Baby Monitor] ........................... 136
[Hom.Monitor] ............................................ 138
Preparations before using
[Hom.Monitor] ...................................... 138
Using [Hom.Monitor] ............................ 139
[DLNA Play] ................................................ 144
Preparations before using
[DLNA Play] ......................................... 144
Playing back on a TV........................... 144
[Copy].......................................................... 146
Preparations before using [Copy] ........ 146
Copying to a PC .................................. 148
[Live Cast]................................................... 150
Preparations before using
[Live Cast]............................................ 151
Broadcasting live ................................. 152
Install the “Image App” ............................. 156
Setting Up a Wi-Fi Connection..................157
Using the Network Easy Setup to
set up a connection.............................. 158
Connecting to a wireless
access point ......................................... 159
Setting up a direct connection to a
smartphone .......................................... 163
Connecting from the history ................. 165
How to Use the [Wi-Fi Setup] Menu..........168
With a PC
What you can do with a PC .......................174
End User License Agreement .............. 176
Operating environment..............................178
Installation ..................................................181
Connecting to a PC ....................................182
About the PC display ........................... 184
Starting HD Writer LE 2.1...........................186
Reading the operating instructions of
the software applications ..................... 186
If using Mac ................................................187
Others
Indications ..................................................188
Messages ....................................................191
About recovery..................................... 192
Troubleshooting .........................................193
Cautions for use .........................................199
About copyright .........................................204
Recording modes/approximate
recordable time ..........................................206
Approximate number of recordable
pictures .......................................................207
Optional accessories .................................208
About the Remote Pan Tilt Cradle ....... 209
- 6 -
1 Speaker
2 A/V connector [A/V] (l 106, 123)
3 Recording/playback button [ / ]
(l 17)
4 //
Level Shot Function button [ ]
(l 42)
/
Optical Image Stabilizer button
[ O.I.S.] (l 43)
5 Battery release lever [BATT] (l 10)
6 Power button [ ] (l 16)
7 HDMI mini connector [HDMI] (l 106)
8 USB terminal
[] (l 115, 121, 182)
9 //
Status indicator (l 16, 157)
/
Status indicator (l 16)
10 Recording start/stop button (l 23)
11 Battery holder (l 10)
12 Tripod receptacle
Attaching a tripod with a screw length of
5.5 mm or more may damage the unit.
13 SD card cover (l 15)
14 Access lamp [ACCESS] (l 15)
15 Card slot (l 15)
Preparation
Names and Functions of Main Parts
1
2
3
4
5
6
7
8
10
9
11
12
13
14
15
HC-V550
HC-V530
HC-V250
HC-V230
HC-V550
HC-V250
HC-V530
HC-V230
- 7 -
16 DC input terminal [DC IN] (l 11)
Do not use any other AC adaptors except the
supplied one.
17 Shoulder strap fixture
18 Grip belt
Adjust the length of the grip belt so that it fits
your hand.
1 Flip the belt.
2 Adjust the length.
3 Replace the belt.
19 Photoshot button [ ] (l 25)
20 Zoom lever [W/T] (In Motion Picture
Recording Mode or Still Picture
Recording Mode) (l 41)/
Thumbnail display switch [ / ]
(l 28)/
Volume lever [sVOLr] (In Playback
Mode) (l 29)
2019
16
17 18
- 8 -
// /
21 LCD monitor (Touch screen) (l 18)
It can open up to 90o.
It can rotate up to 180o A towards the lens or
90o B towards the opposite direction.
//
22 Lens cover
The lens cover opens in Motion Picture
Recording Mode or Still Picture
Recording Mode. (l 17)
23 Lens
24 Internal stereo microphones
HC-V550
HC-V550M
HC-V530
HC-V250 HC-V230
21
21

HC-V550
HC-V550M
HC-V530
22
23
24
- 9 -
/
25 Lens cover opening/closing switch
When not using the unit, close the lens cover to
protect the lens.
Slide the opening/closing switch to open/
close the cover.
26 Lens cover
27 Lens
28 Internal stereo microphones
//
29 Wi-Fi button [Wi-Fi]
(l 129, 135, 138, 144, 146, 150, 165, 168)
30 Wi-Fi Transmitter (l 128)
31 NFC touch area [ ] (l 131, 139)
HC-V250 HC-V230
26
27
28
25
HC-V550
HC-V550M
HC-V250
29
30
31
- 10 -
About batteries that you can use with this unit
The battery that can be used with this unit is VW-VBT190/VW-VBT380.
The unit has a function for distinguishing batteries which can be used safely. The
dedicated battery (VW-VBT190/VW-VBT380) supports this function. The only batteries
suitable for use with this unit are genuine Panasonic products and batteries manufactured
by other companies and certified by Panasonic. Panasonic cannot in any way guarantee
the quality, performance or safety of batteries which have been manufactured by other
companies and are not genuine Panasonic products.
Inserting/removing the battery
Press the power button to turn off the unit. (l 16)
Install the battery by inserting it in the direction shown in the figure.
Preparation
Power supply
It has been found that counterfeit battery packs which look very similar to the genuine
product are made available to purchase in some markets. Some of these battery packs
are not adequately protected with internal protection to meet the requirements of
appropriate safety standards. There is a possibility that these battery packs may lead to
fire or explosion. Please be advised that we are not liable for any accident or failure
occurring as a result of use of a counterfeit battery pack. To ensure that safe products are
used we would recommend that a genuine Panasonic battery pack is used.
Removing the battery
Be sure to hold down the power button until
the status indicator goes off. Then remove the
battery while supporting the unit to prevent it
from dropping.
Move the battery release lever in the
direction indicated by the arrow and
remove the battery when unlocked.
ャモヵヵ
Insert the battery until it clicks and locks.
- 11 -
Charging the battery
The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always
“live” as long as the AC adaptor is connected to an electrical outlet.
Important:
Do not use the AC adaptor/DC cable with any other equipment as it is designed only for
this unit. Also, do not use the AC adaptor/DC cable from other equipment with this unit.
The battery will not be charged if the unit is turned on.
It is recommended to charge the battery in a temperature between 10 oC and 30 oC. (The
battery temperature should also be the same.)
A DC input terminal
1 Connect the DC cable to the AC adaptor and to the DC input terminal of this
unit.
Insert the plugs as far as they will go.
2 Insert the AC adaptor into an AC outlet.
The status indicator will flash red at an interval of approximately 2 seconds (approximately
1 second on, approximately 1 second off), indicating that charging has begun.
It will turn off when the charging is completed.
Connecting to the AC outlet
It is possible to use this unit with power supplied from the AC outlet by turning on the unit with the
AC adaptor connected.
Even when you use the AC adaptor for recording images, keep the battery connected.
This allows you to continue the recording even if a power failure occurs or the AC adaptor is
unplugged from the AC outlet by accident.
To charge by connecting to other device
It is possible to charge by connecting to other device with the USB cable (supplied).
Please refer to page 183.
If the status indicator flashes at a particularly fast or slow rate, refer to page 201.
We recommend using Panasonic batteries (l 12, 13).
If you use other batteries, we cannot guarantee the quality of this product.
Do not heat or expose to flame.
When this unit is purchased, the battery is not charged. Charge the battery fully before
using this unit for the first time.
- 12 -
Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with
doors and windows closed.
Charging and recording time
Charging/Recording time
Temperature: 25 oC/humidity: 60%RH
Charging times in parentheses are when charging from the USB terminal.
HC-V550/HC-V550M/HC-V530
Battery model
number
[Voltage/Capacity
(minimum)]
Charging
time
Recording
format
Recording
mode
Maximum
continuous
recordable
time
Actual
recordable
time
Supplied battery/
VW-VBT190
(optional)
[3.6 V/1940 mAh]
2h20min
(5h20min)
[AVCHD]
[1080/50p] 2 h 10 min 1 h 5 min
[PH]
2h10min
1h5min
[HA] 1 h 10 min
[HG],[HE] 2 h 15 min 1 h 10 min
[MP4/
iFrame]
[1080] 2h10min 1h5min
[720]
2h35min 1h20min
[iFrame]
VW-VBT380
(optional)
[3.6 V/3880 mAh]
3h45min
(9h45min)
[AVCHD]
[1080/50p] 4 h 30 min 2 h 20 min
[PH],[HA],
[HG]
4h40min
2h25min
[HE] 4 h 45 min
[MP4/
iFrame]
[1080] 4h35min 2h20min
[720] 5h25min
2h50min
[iFrame] 5 h 30 min
- 13 -
“h” is an abbreviation for hour, “min” for minute and “s” for second.
These times are approximations.
The indicated charging time is for when the battery has been discharged completely.
Charging time and recordable time vary depending on the usage conditions such as high/
low temperature.
The actual recordable time refers to the recordable time when repeatedly starting/stopping
recording, turning the unit on/off, moving the zoom lever etc.
The batteries heat up after use or charging. This is not a malfunction.
HC-V250/HC-V230
Battery model
number
[Voltage/Capacity
(minimum)]
Charging
time
Recording
format
Recording
mode
Maximum
continuous
recordable
time
Actual
recordable
time
Supplied battery/
VW-VBT190
(optional)
[3.6 V/1940 mAh]
2h20min
(5h20min)
[AVCHD]
[1080/50p] 2 h 10 min 1 h 5 min
[PH],[HA],
[HG]
2h15min
1h10min
[HE] 2 h 20 min
[MP4/
iFrame]
[1080] 2h10min 1h10min
[720] 2h40min 1h20min
[iFrame] 2h45min 1h25min
VW-VBT380
(optional)
[3.6 V/3880 mAh]
3h45min
(9h45min)
[AVCHD]
[1080/50p] 4 h 30 min 2 h 20 min
[PH] 4h35min 2h20min
[HA],[HG],
[HE]
4h40min 2h25min
[MP4/
iFrame]
[1080] 4h30min 2h20min
[720] 5h20min 2h45min
[iFrame] 5h30min 2h50min
Battery capacity indication
The display changes as the battery capacity reduces. ####
If there is less than 3 minutes remaining, then will become red. If the battery
discharges, then will flash.
Screen display will disappear when no touch operation is performed for a specific period of
time. However, it will be constantly displayed when the remaining battery time becomes less
than 30 minutes.
The remaining battery capacity is displayed when using the Panasonic battery that you can
use for this unit. The actual time can vary depending on your actual use.
When using the AC adaptor or batteries made by other companies, the remaining battery
capacity will not be shown.
- 14 -
The unit can record still pictures or motion pictures to an SD card or built-in memory. To record to an
SD card, read the following.
Cards that you can use with this unit
Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating* for motion
picture recording.
* SD Speed Class Rating is the speed
standard regarding continuous writing. Check
via the label on the card, etc.
Please check the latest information on the support website below.
http://panasonic.jp/support/global/cs/e_cam
(This website is in English only.)
When using an SDHC Memory Card/SDXC Memory Card with other equipment, check the
equipment is compatible with these Memory Cards.
An Eye-Fi X2 series SD card is required to use functions related to Eye-Fi. (l 124)
We do not guarantee the operation of SD cards other than the ones above. Further, SD cards
with a capacity of less than 32 MB cannot be used for motion picture recording.
4 GB or more Memory Cards that do not have the SDHC logo or 48 GB or more Memory Cards
that do not have the SDXC logo are not based on SD Memory Card Specifications.
When the write-protect switch A on SD card is locked, no recording, deletion
or editing will be possible on the card.
Keep the Memory Card out of reach of children to prevent swallowing.
Preparation
Recording to a card
Card type Capacity
SD Memory Card 512 MB/1 GB/2 GB
SDHC Memory Card 4GB/6GB/8GB/12GB/16GB/24GB/32GB
SDXC Memory Card 48 GB/64 GB
e.g.:
32
- 15 -
Inserting/removing an SD card
Caution:
Check that the access lamp has gone off.
1 Open the SD card cover and insert (remove) the SD card into (from) the card
slot B.
Face the terminal side C in the direction shown in the illustration and press it straight in as far as
it will go.
Press the centre of the SD card and then pull it straight out.
2 Securely close the SD card cover.
Securely close it until it clicks.
Do not touch the terminals on the back of the
SD card.
Do not apply strong shocks, bend, or drop the
SD card.
Electrical noise, static electricity or the failure
of this unit or the SD card may damage or
erase the data stored on the SD card.
When the card access lamp is lit, do not:
j Remove the SD card
j Turn the unit off
j Insert and remove the USB cable
j Expose the unit to vibrations or shock
Performing the above while the lamp is on
may result in damage to data/SD card or this
unit.
Do not expose the terminals of the SD card to
water, dirt or dust.
Do not place SD cards in the following areas:
j In direct sunlight
j In very dusty or humid areas
j Near a heater
j Locations susceptible to significant
difference in temperature (condensation
can occur.)
j Where static electricity or electromagnetic
waves occur
To protect SD cards, return them to their
cases when you are not using them.
About disposing of or giving away the SD
card. (l 202)
When using an SD card not from Panasonic, or one previously used on other equipment, for the
first time on this unit, format the SD card. (l 38) When the SD card is formatted, all of the
recorded data is deleted. Once the data is deleted, it cannot be restored.
Access lamp
[ACCESS] A
When this unit is accessing
the SD card or built-in
memory, the access lamp
lights up.
- 16 -
You can turn the unit on and off using the power button or by opening and closing the LCD monitor.
Open the LCD monitor and press the power button to turn on the unit.
A The status indicator lights on.
The unit is turned on when the LCD monitor is opened, and unit is turned off when it is closed.
During normal use, opening and closing of the LCD monitor can be conveniently used to
turn the unit on/off.
//
The unit will not turn off while recording motion pictures or connecting to Wi-Fi even if the LCD
monitor is closed.
/
The unit will not turn off while recording motion pictures even if the LCD monitor is closed.
In the following cases, opening the LCD monitor does not turn on the unit. Press the power button
to turn on the unit.
j When the unit is originally purchased
j When you have turned off the unit using the power button
Preparation
Turning the unit on/off
Turning the unit on and off with the power button
Turning the unit on and off with the LCD monitor
To turn off the unit
Hold down the power button until the status
indicator goes off.
HC-V550
HC-V550M
HC-V250
HC-V530 HC-V230
- 17 -
You can switch this unit between Recording Mode (Motion Picture Recording Mode/Still Picture
Recording Mode) and Playback Mode by pressing the recording/playback button.
If you touch the recording mode switching icon in Recording Mode, this unit can be switched
between Motion Picture Recording Mode and Still Picture Recording Mode.
Switching this unit between Recording Mode and
Playback Mode
Switching this unit between Motion Picture Recording
Mode and Still Picture Recording Mode
Touch the recording mode switching icon displayed on the LCD monitor (touch screen) to switch this
unit between Motion Picture Recording Mode and Still Picture Recording Mode.
1 Press the recording/playback button to
switch this unit to Recording Mode.
The recording mode switching icon A is displayed on
the screen.
2 Touch the recording mode switching icon.
Refer to page 18 for touch screen operation.
Preparation
Selecting a mode
Motion Picture Recording Mode (l 23) Recording motion pictures.
Still Picture Recording Mode (l 25) Recording still pictures.
Playback Mode (l 27, 79) Motion picture/Still picture playback.
Motion Picture Recording Mode
Still Picture Recording Mode
Recording/playback button
Press the button to switch this unit between
Recording Mode and Playback Mode.
When you turn on this unit, it starts up in
Recording Mode.
(Motion Picture Recording Mode)
- 18 -
To display the recording mode switching icon
Display of the recording mode switching icon will disappear when no touch operation is performed
for a specific period of time. To display it again, touch the screen.
If the recording start/stop button is pressed in Still Picture Recording Mode or Playback Mode,
this unit will be switched to Motion Picture Recording Mode. During motion picture/still picture
playback or in other conditions, even if the recording start/stop button is pressed, the recording
mode may not be switched.
You can operate by directly touching the LCD monitor (touch screen) with your finger.
Touch
Touch and release the touch screen to select icon or
picture.
Touch the centre of the icon.
Touching the touch screen will not operate while you
are touching another part of the touch screen.
Slide while touching
Move your finger while pressing on the touch screen.
About the operation icons
///:
Touch when changing a page or performing settings.
:
Touch to return to the previous screen.
Preparation
How to use the touch screen
- 19 -
About the Touch Menu
Touch (left side)/ (right side) of on the Touch Menu to switch the
operation icons.
It is also possible to switch the operation icons by sliding the Touch Menu right or left while
touching it.
B You can change the operation icons to display. (l 36)
C Displayed only in Intelligent Auto Plus Mode (l 47) and [Miniature Effect]/[8mm movie]/
[Silent movie] of the Creative Control Mode (l 47).
D Displayed only in [Time Lapse Rec] of the Creative Control Mode (l 47), Scene Mode
(l 51), Endless Loop Recording Mode (l 53), Stop Motion Animation Assist Mode
*
(l 54) and Manual Mode (l 55).
*/ / only
To display the Touch Menu
Do not touch on the LCD monitor with hard pointed tips, such as ball point pens.
A Touch Menu
Recording Mode Playback Mode
Display of the Touch Menu will disappear when no
touch operation is performed for a specific period of
time during recording of motion picture/still picture. To
display it again, touch .
T
W
MENU
T
W
FOCUS
WB
SHTR
IRIS
MENU
ALL
HC-V550
HC-V550M
HC-V530
- 20 -
The clock is not set at the time of purchase. Make sure to set the clock.
1 Select the menu. (l 30)
2 Touch the date or time to be set, then set the desired value using / .
A Displaying the World Time setting (l 31):
[HOME]/ [DESTINATION]
The year can be set between 2000 and 2039.
3 Touch [ENTER].
A message prompting for World Time setting may be
displayed. Perform the World Time setting by touching the
screen. (l 31)
Touch [EXIT] to complete the setting.
When the unit is turned on for the first time, a message asking you to set the date and time will
appear. Select [YES] and perform Steps 2 to 3 to set the date and time.
The date and time function is driven by a built-in lithium battery.
If the time display becomes [- -], the built-in lithium battery needs to be charged. To recharge the
built-in lithium battery, connect the AC adaptor or attach the battery to this unit. The battery is still
being recharged even if the unit is off. Leave the unit as it is for approx. 24 hours and the battery
will maintain the date and time for approx. 4 months.
Preparation
Setting date and time
: [SETUP] # [CLOCK SET]
MENU
- 21 -
Basic camera positioning
1 Hold the unit with both hands.
2 Put your hand through the grip belt.
3 It is convenient to use the Recording button icon A when holding the unit at waist level.
When recording, make sure your footing is stable and there is no danger of colliding with another
person or object.
When you are outdoors, record pictures with the sunlight behind you. If the subject is backlit, it will
become dark in the recording.
Keep your arms near your body and separate your legs for better balance.
Do not cover the microphones with your hand etc.
Basic motion picture recording
The unit should normally be held steady when recording.
If you move the unit when recording, do so slowly, maintaining a constant speed.
The zoom operation is useful for recording subjects you cannot get close to, but overuse of zoom
in and zoom out can make the resulting motion picture less enjoyable to watch.
Recording Yourself
Rotate the LCD monitor towards the lens side.
The image is horizontally flipped as if you see a mirror image.
(However the image recorded is the same as a normal
recording.)
Only some indications will appear on the screen. When
appears, return the direction of the LCD monitor to normal
position and check the warning/alarm indication. (l 191)
Basic
Before recording

- 22 -
The card and built-in memory can be selected separately to record motion pictures or still pictures.
1 Set this unit to Recording Mode. (l 17)
2 Select the menu. (l 30)
3 Touch the media to record motion pictures
or still pictures.
The media selected separately for motion pictures or
still pictures is highlighted in yellow.
4 Touch [ENTER].
Basic
Selecting a media to record [HC-V550M]
: [MEDIA SELECT]
MENU
- 23 -
/
Open the lens cover before turning on the unit. (l 9)
1 Open the LCD monitor, and set this
unit to Motion Picture Recording
Mode. (l 17)
2 Press the recording start/stop
button to start recording.
3 Press the recording start/stop
button again to pause recording.
Recording can also be started/stopped by touching the recording button icon.
Screen indications in the Motion Picture Recording Mode
Screen display will disappear when no touch operation is performed for a specific period of time.
To display it again, touch the screen. (l 31)
It will be constantly displayed when the remaining recordable time becomes less than 30 minutes.
If the recording/playback button is pressed during motion picture recording, the recording
will stop and this unit will be switched to Playback Mode.
To change the recording format, change the
[REC FORMAT] or [REC MODE]. (l 70, 71)
Still pictures can be recorded while recording the motion picture. (l 26)
The images recorded between pressing the recording start/stop button to start recording and
pressing it again to pause recording become one scene.
When you record with the [REC FORMAT] set to [MP4/iFrame], the scenes longer than
approximately 20 minutes will be automatically divided. (Recording will continue.)
Basic
Recording motion pictures
Recording mode
R1h20m
Approximate remaining recordable time
When the remaining time is less than
1 minute, R 0h00m flashes red.
0h00m00s
Recording time elapsed
“h” is an abbreviation for hour, “m” for
minute and “s” for second.
Each time the unit is put into recording
pause, the counter display will be reset
to 0h00m00s.
HC-V250
HC-V230
T
W
A When you begin recording, ; changes
to ¥.
B Recording button icon
0h00m00s
0h00m00s
0h00m00s
R 1h20m
R 1h20m
R 1h20m
- 24 -
While recording is in progress, the recording will not stop even if the LCD monitor is closed.
Please refer to page 206 for details about approximate recordable time.
(Maximum recordable scenes of a single SD card or built-in memory)
Recording format [AVCHD] [MP4/iFrame]
Recordable scenes Approx. 3900 Approx. 89100
Different dates (l 83) Approx. 900 Approx. 900
Maximum number of recordable scenes and maximum number of different dates will be less than
above table when there are both MP4/iFrame scenes and still pictures recorded on an SD card or
the built-in memory.
- 25 -
/
Open the lens cover before turning on the unit. (l 9)
1 Open the LCD monitor, and set this unit
to Still Picture Recording Mode. (l 17)
2 Press the button halfway. (For Auto
Focus only)
Focus indication:
3 Press the button fully.
//
If you set the Optical Image Stabilizer function (l 60) to ([MODE1]), then the Image
Stabilizer function will be more effective. ( (MEGA Optical Image Stabilizer) will be
displayed when the button is pressed halfway.)
/
If you set the Optical Image Stabilizer function (l 43) to ([MODE1]), then the Image
Stabilizer function will be more effective. ( (MEGA Optical Image Stabilizer) will be
displayed when the button is pressed halfway.)
Using a tripod is recommended when recording still pictures in dark places because the shutter
speed becomes slow.
You can also take a picture just by touching the subject to focus. (Touch Shutter: l 64)
The still picture recording time may be long depending on the picture size.
The focus indication and the focus area may not be displayed depending on the recording
conditions or the menu settings.
Basic
Recording still pictures
A Focus indication:
± (The white lamp flashes.): Focusing
¥ (The green lamp lights up.): When in focus
No mark: When focusing is unsuccessful.
B Focus area (area inside brackets)
HC-V250
HC-V230
HC-V550
HC-V550M
HC-V530
MEGA
HC-V250 HC-V230
MEGA
- 26 -
About the screen indications in Still Picture Recording Mode
About the focusing area
When there is a contrasting object ahead or behind the subject in the focus area, the subject may
not be focused. If so, move the contrasting object out of the focus area.
Recording still pictures in Motion Picture Recording
Mode
¬ Set this unit to Motion Picture Recording Mode (l 17)
Press the button fully (press to the bottom) to take the picture.
It is possible to record still pictures while recording motion pictures.
(Simultaneous recording)
While still pictures are being recorded, turns red and the remaining number
of recordable pictures is displayed.
No shutter sound is emitted when recording still pictures.
Self-timer (l 67) do not work.
While recording motion pictures or during the PRE-REC operation, image quality is different from
ordinary still pictures so that motion picture recording takes preference over still picture recording.
If simultaneous recording is performed during motion picture recording, the remaining recordable
time will be shortened. If this unit is turned off or the recording/playback button is pressed, the
remaining recordable time may be lengthened.
The still picture recording time may be long depending on the picture size.
Maximum number of recordable pictures that can be displayed is 9999. If the number of
recordable pictures exceeds 9999, R 9999+ is displayed. The number will not change when the
picture is taken until the number of recordable pictures is 9999 or less.
The recording time may be long depending on the recording condition.
Still picture operation indicator (l 188)
R3000
Remaining number of still pictures
Flashes in red when [0] appears.
Size of still pictures (l 77)
MEGA Optical Image Stabilizer (l 25)
//
Optical Image Stabilizer (l 60)
/
Optical Image Stabilizer (l 43)
R3000R3000R3000
MEGA
10M
Screen display will disappear when
no touch operation is performed for a
specific period of time. To display it
again, touch the screen.
It will be constantly displayed when
the remaining number of still pictures
that can be recorded becomes 200
or less.
10M
MEGA
HC-V550
HC-V550M
HC-V530
HC-V250
HC-V230
- 27 -
1 Set this unit to Playback Mode (l 17).
2 Touch the play mode select icon A (l 19).
You can also set by touching , selecting [VIDEO
SETUP] or [PHOTO SETUP] # [MEDIA, VIDEO/
PICTURE]. (l 30)
3 ///
Select the still picture C or the recording
format of the motion picture D you wish to
play back.
Select the media type E and then select the
still picture C or the recording format of the
motion picture D you wish to play back.
Touch [Enter].
4 (When [AVCHD] or [MP4/iFrame] is touched)
Touch the desired recording format for playback.
When [AVCHD] is selected
When [MP4/iFrame] is selected
The recording mode icon B is displayed in the thumbnail display when the item is touched.
( , , , , , , and )
The following icons are displayed on thumbnails when [ALL AVCHD] or [1080/50i] is touched:
j AVCHD [1080/50p] scene:
j AVCHD [PH] scene:
j AVCHD [HA] scene:
j AVCHD [HG] scene:
j AVCHD [HE] scene:
The following icons are displayed on thumbnails when [ALL MP4/iFrame] is touched:
j MP4 [1080/50p] scene:
j MP4 [720/25p] scene:
j MP4 [360/25p] scene:
j iFrame scene:
Basic
Motion picture/Still picture playback
[ALL AVCHD]/[1080/50p]/[1080/50i]
[ALL MP4/iFrame]/[1080/50p]/[720/25p]/[360/25p]/[iFrame]
ALL
MENU
HC-V550
HC-V530
HC-V250
HC-V230
HC-V550M
50p
- 28 -
5 Touch the scene or the still picture to be played back.
To display the next (previous) page:
j Slide the thumbnail display upward (downward) while touching it.
j Switch the Touch Menu, and then touch (up) / (down) on the thumbnail scroll
lever.
6 Select the playback operation by touching
the operation icon.
Operation icons and screen display will disappear when
no touch operation is performed for a specific period of
time. To display them again, touch the screen.
* When touched two times, the fast rewind/fast forward speed increases. (The screen display
changes to / .)
Change the thumbnail display
While the thumbnail is displayed, the thumbnail display changes in the
following order if the zoom lever is operated to side or side.
20 scenes () 9 scenes () 1 scene () Highlight & Time Frame Index*
(l 81)
* Highlight & Time Frame Index can only set in Motion Picture Playback
Mode.
If the recording/playback button is pressed, the thumbnail display will return to the one that
displays 9 scenes.
By displaying in 1 scene or touching and holding the thumbnail in the 20 scenes or 9 scenes
display, recording date and time are displayed when playing back motion pictures, and recording
date and file number when playing back still pictures.
0h01m30s0h01m30s0h01m30s
Operation icon
Motion picture playback Still picture playback
1/;: Playback/Pause
6: Fast rewind playback*
5: Fast forward playback*
: Stops the playback and shows the
thumbnails.
1/;: Slide show (playback of the still
pictures in numerical order) start/
pause.
2;: Plays back the previous picture.
;1: Plays back the next picture.
: Stops the playback and shows the
thumbnails.
- 29 -
Speaker volume adjustment
Operate the volume lever to adjust the speaker
volume during Motion Picture Playback Mode.
Sound will be heard only during normal playback.
If pause play is continued for approx. 5 minutes, the screen returns to the thumbnails.
The elapsed time for playback indication will be reset to 0h00m00s each scene.
When played back with [ALL AVCHD] or [ALL MP4/iFrame] selected, the screen may become
black momentarily at the time the scene switches.
Towardsr”: Increases the volume
Towardss”: Decreases the volume
Motion picture compatibility
This unit is based on AVCHD Progressive/AVCHD format/MPEG-4 AVC file format.
Even if the devices used have compatible standards, when playback of motion pictures
recorded using another device is performed using this unit, or when motion pictures recorded
using this unit is played back in another device, playback may not proceed normally, or may
not be possible. (Please check compatibility in the operating instruction of your device.)
The only MP4 scenes that can be played back on this unit are those recorded with this unit.
Still picture compatibility
This unit is compliant with the unified standard DCF (Design rule for Camera File system)
established by JEITA (Japan Electronics and Information Technology Industries Association).
The file formats of still pictures supported by this unit is JPEG. (Not all JPEG formatted files
will be played back.)
This unit may degrade or not play back still pictures recorded or created on other products
and other products may degrade or not play back still pictures recorded on this unit.
Depending on the playback device, still pictures may be played back with picture sizes
different from the ones with which they were recorded.
- 30 -
Touch (left side)/ (right side) of on the Touch Menu to display . (l 19)
1 Touch .
2 Touch the top menu A.
3 Touch the submenu B.
Next (previous) page is displayed by touching
/.
4 Touch the desired item to enter the
setting.
5 Touch [EXIT] to exit the menu
setting.
About guide display
After touching , touching the submenus
and items will cause function descriptions and
settings confirmation messages to appear.
After the messages have been displayed, the
guide display is cancelled.
Basic
Using the menu screen
MENU
MENU
MENU
- 31 -
Set the display method for the screen information display.
Please refer to page 20.
It is possible to display and record the time at the travel destination by selecting your home region
and the travel destination.
1 Select the menu.
If the clock is not set, adjust the clock to the current time. (l 20)
When the [HOME] (your home region) is not set, the message appears. Touch [ENTER] and
proceed to Step 3.
2 (Only when setting your home region)
Touch [HOME].
Touch [ENTER].
3 (Only when setting your home region)
Touch / to select your home
region and touch [ENTER].
Touch [SUMMER TIME SET] to set daylight
saving time. is displayed and the
summer time setting is turned on, the time
difference between the current time and GMT
will be set forward by 1 hour. Touch [SUMMER
TIME SET] again to return to the normal time
setting.
If you set [Link Clock to Summertime] to [ON],
the current time will also be set forward by
1hour. (l 32)
4 (Only when setting the region of your travel destination)
Touch [DESTINATION].
Touch [ENTER].
Basic
Using the Setup Menu
[DISPLAY]
: [SETUP] # [DISPLAY] # desired setting
[5 SECONDS]: Information is displayed on the screen for 5 seconds after starting the
Motion Picture Recording Mode or Still Picture Recording Mode, starting
to playback, or touching the screen.
[ON]: Constantly displayed.
[CLOCK SET]
[SET WORLD TIME]
: [SETUP] # [SET WORLD TIME]
MENU
MENU
A The current time
B The time difference from GMT
(Greenwich Mean Time)
- 32 -
When the home region is set for the first time, the screen for selecting home/travel destination
appears after setting the home region successively. If the home region has already been set
once, execute the menu operation for Step 1.
5 (Only when setting the region of your travel
destination)
Touch / to select your travel
destination and touch [ENTER].
Touch [SUMMER TIME SET] to set daylight
saving time. is displayed and the
summer time setting is turned on, the time
difference between the travel destination and
the home region will be set forward by 1 hour.
Touch [SUMMER TIME SET] again to return to
the normal time setting.
If you set [Link Clock to Summertime] to [ON],
the time at the travel destination will also be set
forward by 1 hour.
Close the setting by touching [EXIT].
appears and the time of the travel destination is indicated.
To return the display to the home setting
Set the home region using Steps 1 to 3, and close the setting by touching [EXIT].
If you cannot find your travel destination in the area shown on the screen, set it by using the time
difference from your home region.
If you set this function to [ON] and turn on the summer time setting in [SET WORLD TIME], the
following times will be set forward by 1 hour:
j When setting your home region: the current time
j When setting the region of your travel destination: the time at the travel destination
[Link Clock to Summertime]
: [SETUP] # [Link Clock to Summertime] # desired display
[ON]: The times are adjusted when the summer time setting is turned on.
[OFF]: The times are not adjusted when the summer time setting is turned on.
C The local time at the selected
travel destination
D The time difference between the
travel destination and the home
region
MENU
- 33 -
It is possible to change the date and time display mode.
The date and time are not displayed while the recording mode switching icon is displayed. (l 17)
When the Touch Shutter is enabled, the recording mode switching icon is constantly displayed.
This causes the date and time to disappear from the screen.
It is possible to change the date format.
You can set the display method of the zoom button icons ( / ) and recording button icon
().
Please refer to page 63.
Please refer to page 108.
[DATE/TIME]
: [SETUP] # [DATE/TIME] # desired display
[DATE]/[D/T]/[OFF]
[DATE FORMAT]
: [SETUP] # [DATE FORMAT] # desired setting
[Y/M/D]/[M/D/Y]/[D/M/Y]
[ZOOM/REC DISPLAY]
: [SETUP] # [ZOOM/REC DISPLAY] # desired setting
[ON]: Constantly displayed.
[OFF]: Icons will disappear after approx. 5 seconds without any touch operation.
[O.I.S. LOCK DISPLAY]
[EXT. DISPLAY]
MENU
MENU
T
W
MENU
- 34 -
When about 5 minutes have passed without any operation, this unit automatically turns off to save
battery life.
This unit will not automatically turn off even if [ECONOMY (BATT)] is set to [ON] in following
cases:
j Using the AC adaptor*
j Using the USB cable for PC etc.
j PRE-REC is used
j During slide show playback
j //
Using the Wi-Fi function
* When [ECONOMY (AC)] is activated, this unit automatically turns off.
When about 30 minutes have passed without any operation while connecting AC adaptor with this
unit, this unit automatically turns off.
This unit will not automatically turn off even if [ECONOMY (AC)] is set to [ON] in following cases:
j Using the USB cable for PC etc.
j PRE-REC is used
j During slide show playback
j //
Using the Wi-Fi function
[ECONOMY (BATT)]
: [SETUP] # [ECONOMY (BATT)] # [ON]
[ECONOMY (AC)]
: [SETUP] # [ECONOMY (AC)] # [ON]
MENU
HC-V550
HC-V250
MENU
HC-V550
HC-V250
- 35 -
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened.
When in Quick Start Standby Mode about 50% of the power used in recording pause mode
is being consumed, so the recording time will be reduced.
///
Quick Start will not work if there is no SD card inserted.
Quick Start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if there is no
SD card inserted.
1 Select the menu.
2 Close the LCD monitor.
The status indicator A flashes green and the unit goes into
Quick Start Standby Mode.
//
The lens cover does not close.
3 Open the LCD monitor.
The status indicator A lights red and the unit is put
into recording pause.
About 5 minutes have passed, the Quick Start Standby Mode is cancelled, and the unit is turned
off.
Depending on the recording conditions and menu settings, time for Quick Start may be longer
than 0.6 seconds.
It may take some time for Automatic White Balance to adjust.
In the Quick Start Mode, the zoom magnification becomes approx. 1k.
When it has gone into Quick Start Standby Mode automatically with the [ECONOMY (BATT)]
(l 34)/[ECONOMY (AC)] (l 34), close the LCD monitor once and open it again.
Turn the unit off using the power button.
Touch screen operation, starting and stopping of recording and unit on/off can be confirmed with this
sound.
When [OFF] is selected, the sound is not output at the start/end of recording, etc.
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. (l 191)
[QUICK START]
: [SETUP] # [QUICK START] # [ON]
HC-V550 HC-V530 HC-V250
HC-V230
HC-V550M
MENU
HC-V550
HC-V550M
HC-V530
[ALERT SOUND]
: [SETUP] # [ALERT SOUND] # desired setting
(Volume low)/ (Volume high)/[OFF]
MENU
- 36 -
You can change the operation icons (l 65) to display in the Touch Menu.
Register 3 favourite operation icons.
The default settings are, (Fade), (PRE-REC) and (Backlight Compensation) for
Motion Picture Recording Mode, and (Self-timer), (Backlight Compensation) and
(Tele Macro) for Still Picture Recording Mode.
1 Select the menu.
2 Touch the operation icon you would like to change to cancel the setting.
3 Touch the operation icon to be set.
Name of the function is displayed by touching and holding on the operation icon.
To cancel, touch the operation icon again.
4 Touch [ENTER].
This makes it easier to view the LCD monitor in bright places including outdoors.
These settings will not affect the images actually recorded.
When the AC adaptor is in use, the LCD monitor is set to automatically.
Recordable time with the battery is shortened when the LCD is made brighter.
It adjusts brightness and colour density on the LCD monitor.
These settings will not affect the images actually recorded.
1 Select the menu.
2 Touch / to adjust settings.
3 Touch [ENTER].
Touch [EXIT] to exit the menu screen.
[SELECT OPERATION ICONS]
: [SETUP] # [SELECT OPERATION ICONS]
[POWER LCD]
: [SETUP] # [POWER LCD] # desired setting
(Makes brighter)/ (Normal)/ (Makes less bright)
[LCD SET]
: [SETUP] # [LCD SET] # desired setting
[BRIGHTNESS]: Brightness of the LCD monitor
[COLOUR]: Colour level of the LCD monitor
MENU
MENU
+1
0
-
1
+1
MENU
- 37 -
Please refer to page 109.
Please refer to page 110 .
Please refer to page 108.
Set to [YES] for changing the menu settings back to the default condition.
Settings for [MEDIA SELECT]
*
, [CLOCK SET] and [LANGUAGE] will not be changed.
*For users who have ///, this menu is not displayed.
If you restore the default settings, this unit will switch to the Motion Picture Recording Mode.
Set to [YES] for changing the Wi-Fi settings back to the default condition.
The “LUMIX CLUB” Login ID and Wi-Fi Password are also deleted.
The entered character is confirmed in approx. 1 second after character input, and the cursor is
moved to the right.
It makes the input easy without moving the cursor when characters on the same key are to be
entered again.
Character input screen is displayed in following conditions:
j When setting [TITLE SETUP] for the Highlight Playback (l 88)
j When entering a name in the Baby Calendar (l 93)
j //
When you configure the Wi-Fi function (l 148, 160, 161, 169, 170, 171
, 172)
[HDMI RESOLUTION]
[VIERA Link]
[TV ASPECT]
[INITIAL SET]
: [SETUP] # [INITIAL SET]
//
[Reset Wi-Fi Settings]
: [SETUP] # [Reset Wi-Fi Settings]
[Auto Cursor Position]
: [SETUP] # [Auto Cursor Position] # [ON]
MENU
HC-V550
HC-V530
HC-V250
HC-V230
HC-V550
HC-V550M
HC-V250
MENU
MENU
HC-V550
HC-V250
- 38 -
Set the file number of the MP4/iFrame and still picture recorded next to 0001.
Folder number is updated and file number will start from 0001. (l 184)
To reset the folder number, format the SD card and built-in memory, and then perform [NUMBER
RESET].
//
The file numbers of still pictures you record in Stop Motion Animation Assist Mode are not reset.
Please be aware that if a medium is formatted, then all the data recorded on the medium will be
erased and cannot be restored. Back up important data on a PC, DVD disc etc. (l 174)
*1 only.
*2 Displayed when connecting a USB HDD. (l 115)
///
Media selection screen is not displayed when the USB HDD is not connected. Touch [YES].
When formatting is complete, touch [EXIT] to exit the message screen.
Perform a physical formatting of the SD card when the SD card is to be disposed/ transferred.
(l 202)
Perform a physical formatting of the built-in memory when this unit is to be disposed/ transferred.
(l 200)
Do not turn this unit off or remove the SD card, while formatting. Do not expose the unit to
vibrations or shock.
[NUMBER RESET]
: [SETUP] # [NUMBER RESET]
[FORMAT MEDIA]
: [SETUP] # [FORMAT MEDIA] # desired media
[Built-inMemory]
*1
/[SD CARD]/[HDD]
*2
Use this unit to format media.
Formatting built-in memory is only available with this unit.
Do not format an SD card using any other equipment such as a PC. The card may not be
used on this unit.
MENU
HC-V550
HC-V550M
HC-V530
MENU
HC-V550M
HC-V550 HC-V530 HC-V250
HC-V230
HC-V550M
- 39 -
The used space and remaining recordable time of the SD card and
built-in memory
can be checked.
Touching [CHANGE MEDIA] switches the unit between the display for the SD card and the
display for the built-in memory.
The remaining recordable time in the currently set Recording Mode is displayed only in the
Motion Picture Recording Mode.
Touch [EXIT] to close the indication.
The SD card or built-in memory requires some space to store information and manage system
files, so the actual usable space is slightly less than the indicated value. The usable SD card/built-
in memory space is generally calculated as 1 GB=1,000,000,000 bytes. The capacities of this
unit, PCs and software are expressed as 1 GB=1,024k1,024k1,024=1,073,741,824 bytes.
Therefore, the indicated value of the capacity appears to be smaller.
The firmware version of this unit is displayed.
You can update the firmware version of this unit.
[MEDIA STATUS]
: [SETUP] # [MEDIA STATUS]
[Version Disp.]
: [SETUP] # [Version Disp.]
[Version Up]
: [SETUP] # [Version Up]
For the latest update information, check the support website below. (As of November
2013)
http://panasonic.jp/support/global/cs/e_cam
(This Site is English only)
MENU
HC-V550M
MENU
MENU
- 40 -
This item is used to start the unit demonstration.
If [DEMO MODE] is switched to [ON] and you touch [EXIT] when there is no SD card inserted and
while this unit is connected to the AC adaptor, the demonstration automatically starts.
If any operation takes place, the demonstration is cancelled. However if no operations take place
for approx. 10 minutes, the demonstration automatically starts again. To stop the demonstration,
set [DEMO MODE] to [OFF] or insert an SD card.
//
When Demo Mode is in operation, the lens cover remains open.
This item is used to start the Optical Image Stabilizer demo.
Touch [O.I.S. DEMO], the demonstration automatically starts.
When you touch [EXIT], the demonstration will be cancelled.
This item is displayed only when an Eye-Fi card is inserted.
Please refer to page 124.
This item is displayed only when an Eye-Fi card is inserted.
Please refer to page 125.
You can select the language on the screen display and the menu screen.
[DEMO MODE]
: [SETUP] # [DEMO MODE] # [ON]
[O.I.S. DEMO]
: [SETUP] # [O.I.S. DEMO]
[Eye-Fi TRANSFER]
[Eye-Fi DIRECT]
[LANGUAGE]
: [SETUP] # [LANGUAGE] # desired language
MENU
HC-V550
HC-V550M
HC-V530
MENU
MENU
- 41 -
A Zoom bar
Maximum zoom ratio for recording motion pictures can be set with [ZOOM MODE]. (l 70)
About the zoom bar
The zoom bar is displayed during the zoom operation.
About the zoom speed
The zoom speed varies depending on the range over which the zoom lever is moved.
The zoom operation using the zoom button icons will be performed at a constant speed
respectively.
Zoom ratio during the Still Picture Recording Mode
The zoom ratio can be expanded up to 100k without degrading the picture quality for the Still
Picture Recording Mode. (Extra Optical Zoom)
Maximum zoom ratio in Still Picture Recording Mode varies depending on the setting of
[PICTURE SIZE]. (l 77)
If you take your finger off the zoom lever during zoom operation, the operation sound may be
recorded. When returning the zoom lever to the original position, move it quietly.
When the zoom magnification is at its maximum, the subjects are focused at about 2.2 m or more.
When the zoom magnification is 1k, this unit can focus on a subject approx. 2 cm away from the
lens.
Advanced (Recording)
Using the zoom
T
W
T
W
6
W
T
6
W
T
Zoom lever/Zoom button icons
T side:
Close-up recording (zoom in)
W side:
Wide-angle recording (zoom out)
T
W

B i.Zoom off
C i.Zoom/Digital zoom/Extra Optical Zoom (Blue)
- 42 -
This function detects the horizontal tilt of the unit, and automatically corrects it to the level
position.
The icon changes when the tilt exceeds the correction range.
When the tilt exceeds the correction range, move the unit to the position where / is
displayed.
This function's default setting is (Normal).
The range that this icon can be displayed correctly the slope is about 45 o to the horizontal
direction.
Level Shot Function is cancelled when [LEVEL GAUGE] is set to [ON]. (l 73)
When recording horizontal images using a tripod, attach the unit on the tripod using [LEVEL
GAUGE] (l 73), and then set Level Shot Function to (Normal) or (Strong) before
use.
When you switch the setting of the Level Shot Function, the screen may become black
momentarily.
If you set the option to (Normal)/ (Strong), the angle of view will change.
Advanced (Recording)
Level Shot Function
[HC-V550]/[HC-V550M]/[HC-V530]
(When setting (Normal)) (When setting (Strong))
: With Level Shot Function
: Without Level Shot Function
/ When the tilt is corrected
/ / / When the tilt is above the correction range
Level Shot Function button
Each press of this button switches Level Shot Function.
(Normal) # (Strong) # Off
(Normal): Corrects the tilt.
(Strong): Strengthen tilt correction.
Off: Cancel the setting.
- 43 -
Optical Image Stabilizer can stabilize the image without decreasing the image quality as much.
Changing Image Stabilizer Mode
(Motion Picture Recording Mode)
(Still Picture Recording Mode)
The Image Stabilizer can also be turned on/off using the Touch Function. (l 61)
Please refer to page 63 for details about Optical Image Stabilizer Lock.
Advanced (Recording)
Image Stabilizer Function [HC-V250]/[HC-V230]
: [RECORD SETUP] # [O.I.S.] # [Standard] or [Active]
[Standard]: Compensates for blurring caused by hand-shake
[Active]: Compensates for even greater blurring caused by hand-shake.
: [RECORD SETUP] # [O.I.S.] # [MODE1] or [MODE2]
[MODE1]: The function works all the time.
[MODE2]: The function works when the button is pressed. We recommend
using this mode when you are recording yourself or recording with a tripod
in Still Picture Recording Mode.
Optical Image Stabilizer button
Press the button to turn Optical Image Stabilizer on/off.
(Motion Picture Recording Mode)
/ # (setting cancelled)
When [O.I.S.] is set to [Standard], is displayed; when
[O.I.S.] is set to [Active], is displayed.
When recording with a tripod in Motion Picture Recording
Mode, we recommend that you set the Image Stabilizer
(off).
(Still Picture Recording Mode)
/ # (setting cancelled)
When [O.I.S.] is [MODE1], is displayed. When
[O.I.S.] is [MODE2], is displayed.
O.I.S.
MENU
MENU
- 44 -
1 Touch the Recording Mode button icon.
2 Touch the desired Recording Mode button icon.
*1 In Motion Picture Recording Mode only
*2 / / only
*3 In Still Picture Recording Mode only
Advanced (Recording)
Changing the Recording Mode
Mode Effect
Intelligent Auto
You can switch the mode to the Intelligent Auto Mode,
which optimises settings to the recording environment
you are in. (l 45)
Intelligent Auto Plus
You can add manually-adjusted brightness and colour
balance settings to the Intelligent Auto Mode, and
record. (l 47)
*1
Creative Control
You can record motion pictures with added effects.
(l 47)
Scene Mode
This option allows this unit to automatically adjust the
shutter speed and aperture, etc. according to the scene
you want to record. (l 51)
Manual
You can set the shutter speed, focus, White Balance
and brightness (iris/gain). (l 55)
*1
Endless Loop
Recording
No matter how long you record, you can only record
scenes for the last 1 hour to SD card. (l 53)
*2, 3
Stop Motion
Animation Assist
You can set a recorded still picture as the background,
and record the next picture while looking at that
recorded picture as the background. (l 54)
MENU
MNL
HC-V550
HC-V550M
HC-V530
- 45 -
Intelligent Auto
The following modes (appropriate for the condition) are set just by pointing the unit to what you want
to record.
*1 In Motion Picture Recording Mode only
*2 In Still Picture Recording Mode only
Depending on the recording conditions, the unit may not enter the desired mode.
In the Portrait, Spotlight, or Low Light Mode, the face will be surrounded by a white frame when
detected. In the Portrait Mode, a subject that is bigger and close to centre of the screen will be
surrounded by an orange frame. (l 72)
Using a tripod is recommended in Night Scenery Mode.
Faces cannot be detected depending on the recording conditions, such as when faces are of
certain sizes or at certain tilts or when digital zoom is used.
Mode Effect
Portrait Faces are detected and focused automatically, and the brightness is
adjusted so it is recorded clearly.
Scenery The whole landscape will be recorded vividly without whiting out the
background sky, which may be very bright.
*1
Spotlight Very bright object is recorded clearly.
*1
Low Light It can record very clearly even in a dark room or twilight.
*2
Night Scenery You can record night scenery vividly by slowing the shutter speed.
*2
Macro This allows recording at very close proximity to the object of recording.
*1
*2
Normal
Normal
In modes other than those described above, the contrast is adjusted to
give a clear picture.
- 46 -
Intelligent Auto Mode
When switching to Intelligent Auto Mode, the Automatic White Balance and Auto Focus operate and
automatically adjust the colour balance and focusing.
Depending on the brightness of the subject etc., the aperture and shutter speed are automatically
adjusted for an optimum brightness.
Colour balance and focus may not be adjusted automatically depending on light sources or
scenes. If so, manually adjust these settings. (l 56, 58)
Automatic White Balance
The illustration shows the range over which Automatic White Balance functions.
1) The effective range of Automatic White Balance adjustment
on this unit
2) Blue sky
3) Cloudy sky (rain)
4) Sunlight
5) White fluorescent lamp
6) Halogen light bulb
7) Incandescent light bulb
8) Sunrise or sunset
9) Candlelight
If the Automatic White Balance is not functioning normally, adjust
the White Balance manually. (l 56)
Auto Focus
The unit focuses automatically.
Auto Focus does not work correctly in the following situations.
Record pictures in the Manual Focus Mode. (l 58)
j Recording distant and close-up objects at the same time
j Recording a subject behind dirty or dusty window
j Recording a subject that is surrounded by objects with glossy surfaces or by highly reflective
objects
4)
5)
6)
7)
8)
10 000K
9 000K
8 000K
7 000K
6 000K
5 000K
4 000K
3 000K
2 000K
2)
1)
3)
9)
- 47 -
Intelligent Auto Plus
Please refer to page 45 for details about the effect of each mode.
(Portrait)/ (Scenery)/ (Spotlight)
*1
/(Low Light)
*1
/
(Night Scenery)
*2
/ (Macro)
*2
/(Normal)
*1
/(Normal)
*2
*1 In Motion Picture Recording Mode only
*2 In Still Picture Recording Mode only
Change the Recording Mode to . (l 44)
1 (When adjusting the brightness)
Touch .
(When adjusting the colour balance)
Touch .
R side: Sets the balance to a reddish tone.
B side: Sets the balance to a bluish tone.
Except for when adjusting the brightness or colour balance, if you do not touch the screen for a
while, the Touch Menu will disappear. To display it again, touch .
2 Touch / to adjust settings.
Touch while adjusting the brightness, or touch while adjusting the colour balance to
make the display of the adjustment bar disappear.
3 Start recording.
Creative Control
Set [REC FORMAT] to [AVCHD]. (l 70)
Change the Recording Mode to . (l 44)
Select the desired Creative Control Mode, then touch [Enter].
Still pictures cannot be taken.
Mode Effect
[Miniature Effect]
You can record motion pictures with a diorama effect like recording a
miniature by intentionally creating focused area and out of focused
area in the peripheral of the image and recording motion picture with
an interval. (l 48)
Motion pictures recorded with this function will look as if the frame
rate is low.
[8mm movie] You can record motion pictures with a faded retro effect. (l 49)
[Silent movie]
You can record motion pictures that are similar to black-and-white
silent films by lowering the amount of incoming light. (l 49)
[Time Lapse Rec]
You can record a scene that moves slowly over a long period of time
as a short time motion picture by recording one frame at each set
time lapse. (l 50)
- 48 -
1 Touch to adjust the horizontal position of
the in-focus portion.
If you touch the screen, you can adjust the horizontal
position of the in-focus portion.
When no touch operations are performed for approximately
1 second, [Reset], [SIZE], and [ENTER] are displayed. If
you touch the screen, you can readjust the horizontal
position of the in-focus portion.
Position of the in-focus portion will return to original position when you touch [Reset].
2 Touch [SIZE].
The size of the in-focus portion is switched every time you touch [SIZE].
Medium size # Large size # Small size
If you touch the screen, you can adjust the horizontal position of the in-focus portion.
If you touch [Reset], the in-focus portion is reset to the original position and [SIZE] is reset to the
medium size.
3 Touch [ENTER].
4
(When adjusting the brightness)
Touch .
The level of brightness is switched every time you touch the icon.
(Standard) # (Bright) # (Dark)
5 (When adjusting the vividness)
Touch .
The level of vividness is switched every time you touch the icon.
(Standard) # (Vivid) # (Most vivid)
6 Start recording.
It will record with an interval. 1 second will be recorded for approximately every 6 seconds of
recording.
To make the Miniature Effect easier to gain, record objects incorporating a distant view or those
that can provide depth or a skewed perspective. Also, use a tripod and avoid zooming.
You may see a lot of noise in the in-focus portion when recording dark subjects such as night
scenes.
Audio cannot be recorded.
[REC MODE] is set to [HA].
The maximum recordable time is 12 hours.
Motion pictures recorded with this function will look as if the frame rate is low.
Setting Miniature Effect will set [RELAY REC] to [OFF]. (l 72)
[Miniature Effect]
MINI
HC-V550M
- 49 -
1 (When adjusting the brightness)
Touch .
The level of brightness is switched every time you touch the icon.
(Standard) # (Bright) # (Dark)
2 (When adjusting the colour balance)
Touch .
The level of colour balance is switched every time you touch the icon.
(Blue) # (Red) # (Yellow)
3 Start recording.
The sound is monaural.
1 (When adjusting the brightness)
Touch .
The level of brightness is switched every time you touch the icon.
(Standard) # (Bright) # (Dark)
2 Start recording.
Audio cannot be recorded.
[8mm movie]
[Silent movie]
8mm
SILN
- 50 -
Touch the desired setup time.
Touch [ENTER].
A frame is recorded with a set recording interval. 25 frames will make up motion picture of
1 second.
“h” is an abbreviation for hour, “min” for minute and “s” for second.
These times are approximations.
Maximum recordable time is 12 hours.
Audio cannot be recorded.
[REC MODE] is set to [HA].
The shortest motion picture recording time is 1 second.
The colour balance and focus may not be adjusted automatically depending on the light source or
scene. If so, manually adjust those settings. (l 56, 58)
Setting Time Lapse Recording will set [RELAY REC] to [OFF]. (l 72)
When recording for a long time, we recommend recording with the AC adaptor connected.
[Time Lapse Rec]
[1 SECOND]/[10 SECONDS]/[30 SECONDS]/[1 MINUTE]/[2 MINUTES]
Setup example
Setup time
(recording
interval)
Recording time Recorded time
Sunset 1s 1h 2min
Blooming 30 s 3 h 12 s
INTV
HC-V550M
- 51 -
Scene Mode
Change the Recording Mode to . (l 44)
Touch the desired Scene Mode.
Touch [ENTER].
(Sports/Portrait/Soft Skin/Spotlight/Snow/Beach/Sunset/Scenery)
j The shutter speed is 1/6 or more in Still Picture Recording Mode.
(Sunset/Low Light)
j The shutter speed is 1/25 or more in Motion Picture Recording Mode.
(Sunset/Scenery/Fireworks/Night Scenery)
j Image may get blurry when close object is recorded.
(Sports)
j During normal playback, the image movement may not look smooth.
j Colour and screen brightness may change under indoor lighting.
j If the brightness is insufficient, the Sports Mode does not function. The display flashes.
(Portrait)
j Colour and screen brightness may change under indoor lighting.
(Soft Skin)
j If the background or anything else in the scene has colours similar to the skin colour, they will
also be smoothed.
j If the brightness is insufficient, the effect may not be clear.
j If you record a person in the distance, the face may not be recorded clearly. In this case, cancel
Soft Skin Mode or zoom in on the face (close-up) to record.
(Fireworks)
j The shutter speed is 1/25.
j Image may get washed out when recorded in bright surrounding.
Mode Effect
5Sports: To make fast moving scenes less shaky with slow playback and
pause of playback
Portrait: To make people stand out against the background
Soft Skin: To makes skin colours appear softer for a more attractive
appearance
Spotlight: Improved quality when subject is brightly illuminated.
Snow: Improved image quality when shooting in snowy locations.
Beach: To make blue in the sea or sky vibrant
Sunset: To make red in the sunrise or sunset vibrant
Scenery: For spatial scenery
Fireworks: To capture the fireworks in the night sky beautifully
Night Scenery: To capture the evening or night scenery beautifully
Low Light: For dark scenes, such as at dusk
(In Motion Picture Recording Mode only)
- 52 -
(Night Scenery)
j The shutter speed is 1/2 or more in Still Picture Recording Mode.
j Using a tripod is recommended.
- 53 -
Endless Loop Recording
Insert an SD card.
Change the Recording Mode to . (l 44)
1 Select sound in loop recording setting.
2 Start recording.
Once you start recording, the scene will be automatically divided every 2 minutes. The divided
scenes will be saved in the SD card. (Each time you use Endless Loop Recording, a set of up to
30 scenes will be saved.)
When the period between the time you start recording and the time you stop recording is longer
than 1 hour (approximate), only the last 1 hour (approximate) part up to the end of the recording
will be saved. The part before the 1 hour part will be deleted.
Recording stops automatically when approximately 24 hours have passed since the start of the
recording.
During recording, the blinks.
The remaining recordable time and elapsed recording time are not displayed. (l 23)
Only when sound in loop recording is set to [ON], (microphone input level meter) is
displayed.
To switch sound in loop recording
The menu can be set to switch to sound in loop recording.
Still pictures cannot be taken.
[REC FORMAT] is set to [MP4/iFrame], and [REC MODE] is set to [720].
//
Image Stabilizer Function is set to (setting cancelled) and Level Shot Function is set to off.
/
Image Stabilizer Function is set to (setting cancelled).
Endless Loop Recording is not possible in the following cases:
j When the SD card is not inserted
j When the approximate remaining recordable time on the SD card is less than 1 hour
(The time between R 0h00m and R 0h59m flashes red.)
Since each set of loop-recorded scenes is displayed separately on the date list, it is convenient to
play back loop-recorded scenes by date. (l 83)
(The date displayed on the date list will be the one on which you started Endless Loop
Recording.)
[ON]: Records sound.
[OFF]: Recording of sound is off.
: [RECORD SETUP] # [Sound In Loop Recording] # [ON] or [OFF]
MENU
HC-V550
HC-V550M
HC-V530
HC-V250 HC-V230
- 54 -
Stop Motion Animation Assist
[HC-V550]/[HC-V550M]/[HC-V530]
Change the Recording Mode to . (l 44)
1 Press the button to record the still pictures. (l 25)
2 Touch [Enter].
A still picture will be recorded, and it will be displayed in a semi-transparent state on the recording
screen. Look at the picture to estimate how far you should move the subject for the next
recording.
If you have already recorded still pictures in the recording group, the last still picture will be
displayed in a semi-transparent state on the recording screen.
To record again, touch and record again.
3 Move the subject and determine the composition of the picture.
Repeat Steps 1-3 to continue recording.
You can save still pictures in the same recording group until you use [Create Stop Motion].
Creating a new recording group
If you touch [YES], a new recording group will be created and the recording screen will be
displayed.
Once you create a recording group, you cannot save still pictures in any of the older recording
groups.
[PICTURE SIZE] is set to (1920k1080).
///
When you want to record still pictures in a separate recording group, use a different SD card.
When you want to record still pictures in a separate recording group, change the recording media
or use a different SD card.
For details on playback of the Stop Motion Animation Assist Mode, refer to page 96.
Before recording in Stop Motion Animation Assist Mode
You can create a slideshow that appears to be moving by recording the subject while moved a
little at a time.
Each recording group can store up to 999 still pictures recorded in Stop Motion Animation
Assist Mode.
Recording groups for the SD card and the built-in memory are created separately.
: [PICTURE] # [Create Stop Motion]
HC-V550M
MENU
2.1M
HC-V550
HC-V530
HC-V250
HC-V230
HC-V550M
- 55 -
The Manual Focus, White Balance, Shutter Speed, Brightness (Iris and Gain) settings are
retained when you change between Motion Picture Recording Mode and Still Picture
Recording Mode.
Touch the to switch to Manual Mode. (l 44)
Advanced (Recording)
Manual recording
MNL
FOCUS
WB
SHTR
IRIS
MNL
A Manual icon
Focus (l 58)
White Balance (l 56)
Manual Shutter Speed (l 57)
Iris Adjustment (l 57)
FOCUS
WB
SHTR
IRIS
- 56 -
White Balance
Automatic White Balance function may not reproduce natural colours depending on the scenes or
lighting conditions. If so, you can adjust the White Balance manually.
Switch to Manual Mode. (l 55)
1 Touch [WB].
2 Touch / to select White Balance Mode.
Touch [WB] to select the mode.
To return to auto setting, set to or change the Recording Mode to the Intelligent Auto
Mode. (l 44)
To set the White Balance manually
1 Select , fill the screen with a white subject.
2 Touch and set the blinking .
When the screen turns black instantly and the display
stops flashing and then lights constantly, the setting is
complete.
If the display continues flashing, the White Balance
cannot be set. In this case, use other White Balance Modes.
/
If you turn on the unit with the lens cover closed, the Auto White Balance will not be performed
correctly. Always open the lens cover before turning on the unit.
When the display flashes, the Manual White Balance previously adjusted is stored.
Whenever recording conditions change, re-set the White Balance.
When setting both the White Balance and the iris/gain, set the White Balance first.
is not displayed on the screen when is being set.
AWB
FOCUS
WB
SHTR
IRIS
MNL
Icon Mode/Recording conditions
Automatic White Balance adjustment
Sunny mode:
Outdoors, under a clear sky
Cloudy mode:
Outdoors, under cloudy sky
Indoor mode 1:
Incandescent light, video lights like in the studio, etc.
Indoor mode 2:
Colour fluorescent lamps, sodium lamps in gymnasiums etc.
Manual adjustment mode:
Mercury-vapor lamps, sodium lamps, some fluorescent lights
Lights used for wedding receptions at hotels, stage spotlights in theaters
Sunrise, sunset, etc.
AWB
AWB
FOCUS
WB
SHTR
IRIS
MNL
HC-V250 HC-V230
AWB
AWB
- 57 -
Manual shutter speed/iris adjustment
Shutter Speed:
Adjust it when recording fast-moving subjects.
Iris:
Adjust it when the screen is too bright or too dark.
Switch to Manual Mode. (l 55)
1 Touch [SHTR] or [IRIS].
2 Touch / to adjust settings.
Touch [SHTR]/[IRIS] to end the adjustment.
: Shutter speed:
1/50 to 1/8000
If [AUTO SLOW SHTR] is set to [ON], the shutter speed will be set between 1/25 and 1/8000.
The shutter speed closer to 1/8000 is faster.
The shutter speed will be set between 1/2 and 1/2000 in Still Picture Recording Mode.
: Iris/Gain value:
CLOSE
!#
(F16 to F2.0)
!#
OPEN
!#
(0dB to 18dB)
Value closer to CLOSE darken the image.
Value closer to 18dB brighten the image.
When the iris value is adjusted to brighter than OPEN, it changes to the gain value.
To return to auto setting, change the Recording Mode to the Intelligent Auto Mode. (l 44)
When setting both the shutter speed and the iris/gain value, set the shutter speed and then set
the iris/gain value.
Manual shutter speed adjustment
When the shutter speed is set lower than 1/12 in the Still Picture Recording Mode, using a tripod
is recommended. The shutter speed will be set to 1/25 when the unit is turned on again or when
the Quick Start is performed.
You may see a band of light around an object that is shining very bright, or highly reflective.
During normal playback, image movement may not look smooth.
If you record an extremely bright object or record under indoor lighting, colour and screen
brightness may change or a horizontal line may appear on the screen. In this case, record in the
Intelligent Auto Mode or set the shutter speed to 1/100 in areas where the power supply
frequency is 50 Hz, or 1/125 in areas of 60 Hz.
Brightness of the image displayed on the LCD monitor may be different from brightness of the
image actually recorded during the Still Picture Recording Mode. Confirm the image on the
playback screen after recording.
Manual iris/gain adjustment
If the gain value is increased, the noise on the screen increases.
Depending on the zoom magnification, there are iris values that are not displayed.
SHTR
IRIS
- 58 -
Manual Focus adjustment
If auto focusing is difficult due to the conditions, then use Manual Focus.
Switch to Manual Mode. (l 55)
1 (When MF assist function is used)
Select the menu.
Touch to display the Manual icon.
2 Touch [FOCUS].
3 Touch [MF] to change to Manual Focus.
MF appears on the screen.
4 Adjust the focus by touching / .
The in-focus area is displayed in blue. The normal screen
returns approximately 2 seconds after you finish bringing
the subject into focus.
Touch [FOCUS] to end the adjustment.
When [MF ASSIST] is [OFF], the blue area is not
displayed.
To restore Auto Focus, touch [AF] in Step 3 or change the Recording Mode to the Intelligent Auto
Mode. (l 44)
The blue display does not appear on the images actually recorded.
: [RECORD SETUP] # [MF ASSIST] # [ON]
: To focus on a close subject
: To focus on a faraway subject
MENU
MNL
FOCUS
WB
SHTR
IRIS
A Part displayed in blue
MF
MF
MF
MF
- 59 -
You can record using convenient functions just by the easy operation of touching the screen.
1 Touch (left side)/ (right side) of on the Touch Menu to display
Touch Function icons. (l 19)
2 Touch the Touch Function icon.
(e.g. AF/AE tracking)
To cancel, touch the Touch Function icon again. (Optical
Image Stabilizer Lock is cancelled by releasing the finger
touching .)
Touch function icons
*1 In Motion Picture Recording Mode only
*2 In Still Picture Recording Mode only
Advanced (Recording)
Recording with the Touch Function
Image Stabilizer Function
AF/AE tracking
Optical Image Stabilizer Lock
*1
Touch Shutter
*2
- 60 -
Use the Image Stabilizer to reduce the effects of shake during recording.
This unit is equipped with Hybrid Optical Image Stabilizer.
Hybrid Optical Image Stabilizer is a hybrid of Optical and Electrical Image Stabilizer.
Touch to switch the Image Stabilizer on/off.
The icon at position A is switched.
Changing Image Stabilizer Mode
(Motion Picture Recording Mode)
Setting [HYBRID O.I.S.]
When set to [ON], you can further improve image stabilization for recording while walking, or
holding the unit and recording a distant subject with zoom.
This function’s default setting is [ON].
Setting [O.I.S.]
//
Image Stabilizer Function
HC-V550
HC-V550M
HC-V530
(Motion Picture Recording Mode)
(/), (/) # (setting cancelled)
When [O.I.S.] is set to [Standard], is displayed; when [O.I.S.] is set to [Active], is
displayed.
When [HYBRID O.I.S.] is set to [ON] and [O.I.S.] is set to [Active], is displayed;
When [HYBRID O.I.S.] is set to [ON] and [O.I.S.] is set to [Standard], is displayed.
When recording with a tripod in Motion Picture Recording Mode, we recommend that you set
the Image Stabilizer (off).
(Still Picture Recording Mode)
/ # (setting cancelled)
When [O.I.S.] is [MODE1], is displayed. When [O.I.S.] is [MODE2], is displayed.
: [RECORD SETUP] # [HYBRID O.I.S.] # [ON] or [OFF]
: [RECORD SETUP] # [O.I.S.] # [Standard] or [Active]
[Standard]: Compensates for blurring caused by hand-shake
[Active]: Compensates for even greater blurring caused by hand-shake.
MENU
MENU
- 61 -
(Still Picture Recording Mode)
Optical image stabilizer can stabilize the image without decreasing the image quality as much.
Touch to switch the Image Stabilizer on/off.
The icon at position A is switched.
For details about the icons to be displayed, refer to page
43.
: [RECORD SETUP] # [O.I.S.] # [MODE1] or [MODE2]
[MODE1]: The function works all the time.
[MODE2]: The function works when the button is pressed. We recommend
using this mode when you are recording yourself or recording with a tripod
in Still Picture Recording Mode.
/
Image Stabilizer Function
MENU
HC-V250
HC-V230
- 62 -
It is possible to set the focus and exposure to the subject specified on the touch screen.
The focus and exposure will keep following the subject automatically even if it moves.
1 Touch .
An icon is displayed B.
2 Touch the object and lock the target.
When you touch the head of the object, the target frame
on the head gets locked and tracking starts.
Touch the object to be changed again when you want to
change the target.
When the Intelligent Auto Mode or Intelligent Auto Plus
Mode is selected, the setting becomes /
(Normal) and touched object is tracked. Selection
becomes / (Portrait) when target frame is locked
on a face. (It may turn to / (Normal) even if the
target is locked on the face when a spotlight is shining or
with a dark scene.)
3 Start recording.
About target frame
When target lock fails, the target frame blinks in red and then disappears. Touch a characteristic
part (colour etc.) on the object to lock onto it again.
When the button is pressed halfway in Still Picture Recording Mode, the focus is set to the
object that is locked. The target frame turns green when it focuses, and the target cannot be
changed.
This function cannot be used in Manual Mode. In Still Picture Recording Mode, it can only be
used with some settings in Scene Mode.
It may track different objects or may not lock the target depending on the recording conditions
such as the following:
j When the object is too large or too small
j When colour of the object is similar to the background
j When the scene is dark
When the target is locked in Still Picture Recording Mode, the screen may become dark.
If you use the Fade function while the target is locked, the target lock will be cancelled. (l 66)
AF/AE tracking will be cancelled in the following cases.
j When the unit is turned off
j Press the recording/playback button
j Touch the recording mode switching icon
j Touch the Recording Mode button icon
j Switch to recording of yourself
AF/AE tracking
A Target frame
- 63 -
In Motion Picture Recording Mode, you can further improve optical image stabilization by
touching and holding . With this function, you can further reduce the effects of the
shake that tends to occur when using zoom.
1 //
Touch to turn the Image Stabilizer on. (l 60)
/
Touch to turn the Image Stabilizer on. (l 61)
2 Touch and hold .
Icon is displayed in A while you are touching and holding .
Optical Image Stabilizer Lock is released when you remove your finger from the icon.
To make the display of disappear
Display of will not disappear even when no operation is performed for specific time with the
default setting. To make the display of disappear, change the setting of the [O.I.S. LOCK
DISPLAY].
Stabilization may not be possible under strong shaking conditions.
To record while moving the unit quickly, release Optical Image Stabilizer Lock.
Optical Image Stabilizer Lock
: [SETUP] # [O.I.S. LOCK DISPLAY] # desired setting
[ON]: Constantly display.
[OFF]: The icon will disappear after approx. 5 seconds without any touch operation.
HC-V550
HC-V550M
HC-V530
HC-V250
HC-V230
MENU
- 64 -
It is possible to focus and record a still picture of a subject that is touched.
1 Touch .
An icon is displayed A.
2 Touch the subject.
Focus area is displayed at the touched position, and a
still picture is recorded.
Depending on the recording conditions or recognition of the touched position, it may not be
possible to record the intended picture.
This will not operate for recording yourself.
Touch Shutter
- 65 -
Select the operation icons to add different effects to the images to be recorded.
1 Touch (left side)/ (right side) of on the Touch Menu to display the
operation icons. (l 19)
2 Touch an operation icon.
(e.g. PRE-REC)
The operation icons that are displayed in the Touch
Menu can be changed.
([SELECT OPERATION ICONS]: l 36)
Select the operation icon again to cancel the function.
Refer to the respective pages for cancelling the following
functions.
j Self-timer (l 67)
j Guidelines (l 68)
The icon is displayed when the operation icon is set.
Operation icons
*1 Not displayed in Still Picture Recording Mode.
*2 Not displayed in Motion Picture Recording Mode.
If you turn off the unit or press the recording/playback button,
PRE-REC, Backlight Compensation, Night Mode, Self-timer and Tele Macro functions are
cancelled.
If you turn off the unit, the Fade function is cancelled.
It is possible to set from the menu.
Advanced (Recording)
Recording functions of operation
icons
PRE-REC
Fade
*1
Intelligent Contrast Control
*1
PRE-REC
*1
Self-timer
*2
Intelligent Exposure
*2
Backlight Compensation
Tele Macro
Guidelines
Night Mode
*1
- 66 -
When you start recording, the image/audio gradually
appears. (Fade in)
When you pause recording, the image/audio gradually
disappears. (Fade out)
The Fade setting is cancelled when the recording stops.
To select the colour for fade in/out
The thumbnails of scenes recorded using fade in become black (or white).
This brightens parts that are in shadow and difficult to see and suppresses white saturation
in bright parts at the same time. Both bright and dark parts can be recorded clearly.
If there are extremely dark or bright parts or the brightness is insufficient, the effect may not be
clear.
Fade
: [RECORD SETUP] # [FADE COLOUR] #
[WHITE] or [BLACK]
Intelligent Contrast Control
(Fade in)
(Fade out)
MENU
- 67 -
This allows recording of the pictures and sound to start approximately 3 seconds before the
recording start/stop button is pressed.
appears on the screen.
Aim the unit at the subject beforehand.
There is no beep sound.
PRE-REC is cancelled in the following cases.
j Press the recording/playback button
j Touch the recording mode switching icon
j ///
If you remove the SD card
j
If you remove the SD card while [MEDIA SELECT] is set to [VIDEO]/[SD CARD]
j If you touch
j //
If you press
the
Wi-Fi button
j If you turn the unit off
j If you start recording
j After 3 hours have passed
After setting PRE-REC, if recording starts in less than 3 seconds, motion pictures taken
3 seconds before pressing the recording start/stop button cannot be recorded.
Images displayed on the thumbnail in Playback Mode will differ from the motion pictures
displayed at the start of playback.
This is for recording still pictures using the timer.
Each time the icon is selected, the indication changes by one setting in the following order:
Ø10 (Records after 10 seconds) # Ø2 (Records after 2 seconds) # setting cancelled
When you press the button, Ø10 or Ø2 flashes for the set period before a still picture is
recorded. After recording, the Self-timer is cancelled.
In Auto Focus Mode, if the button is pressed halfway once and then fully, the lens focuses
on the subject when the button is pressed halfway. If the button is pressed fully all at once,
the lens focuses on the subject just before recording.
To stop the timer midway through
Touch [CANCEL].
Setting the Self-timer to Ø2 is a good way to prevent image shake when the button is
pressed while using a tripod etc.
This brightens dark areas so the image can be recorded clearly.
If there are extremely dark parts or the brightness is insufficient, the effect may not be clear.
PRE-REC
This prevents you from missing a shot.
Self-timer
Intelligent Exposure
PRE-REC
HC-V550
HC-V530
HC-V250
HC-V230
HC-V550M
MENU
HC-V550
HC-V250
- 68 -
This makes the image brighter to prevent darkening of a backlit subject.
A more impressive image can be obtained by focusing on the object only in close-up and
shading off the background.
The unit can focus on the subject at a distance of approx. 1.1 m.
When you set Tele Macro, the zoom magnification automatically changes to one of the following
levels. In Still Picture Recording Mode, the level depends on the picture size setting. If you lower
the zoom magnification to a level below the following values, Tele Macro will be cancelled.
(Motion Picture Recording Mode)
j
62k
*
(when the zoom magnification before you set Tele Macro was 62k or lower)
(Still Picture Recording Mode)
j 62k (when the picture size is set to [ 10M]/[ 2.1M] and the zoom magnification before
you set Tele Macro was 62k or lower)
j 52k (when the picture size is set to [ 7.4M]/[ 0.3M] and the zoom magnification before
you set Tele Macro was 52k or lower)
j 51k (when the picture size is set to [ 7.7M]/[ 2M] and the zoom magnification before
you set Tele Macro was 51k or lower)
*/ /
Scale factor when [O.I.S.] is set to [Standard] and Level Shot Function is set to off.
/
Scale factor when [O.I.S.] is set to [Standard].
You can check if the image is level while recording motion pictures and still pictures. The
function can also be used to estimate the balance of the composition.
It will switch every time the icon is touched.
# # # Setting cancelled
The guidelines do not appear on the images actually recorded.
This function allows you to record colour images in very low light situations. (Minimum
required illumination: approx. 1 lx)
Recorded scene is seen as if frames were missed.
If set in a bright place, the screen may become washed out for a while.
Bright dots that are usually invisible may be seen, but this is not a malfunction.
Using a tripod is recommended.
In darker areas, Auto Focus may focus a bit slower. This is normal.
Backlight Compensation
Tele Macro
Guidelines
Night Mode
16:9
16:9
4:3
4:3
3
:
2
3
:
2
HC-V550
HC-V550M
HC-V530
HC-V250
HC-V230
- 69 -
This function is identical to Scene Mode in Recording Mode. (l 44)
The shutter speed and aperture, etc. are automatically adjusted to match the scene you want to
record.
This item is displayed in the menu only when [Time Lapse Rec] in Creative Control Mode is
set. (l 50)
Please refer to page 51 for details about the effect of each mode.
Advanced (Recording)
Recording functions of menus
[SCENE MODE]
: [RECORD SETUP] # [SCENE MODE] # desired setting
[OFF]: Cancel the setting
5Sports: To make fast moving scenes less shaky with slow playback and
pause of playback
Portrait: To make people stand out against the background
Soft Skin: To makes skin colours appear softer for a more attractive
appearance
Spotlight: Improved quality when subject is brightly illuminated.
Snow: Improved image quality when shooting in snowy locations.
Beach: To make blue in the sea or sky vibrant
Sunset: To make red in the sunrise or sunset vibrant
Scenery: For spatial scenery
Fireworks: To capture the fireworks in the night sky beautifully
Night Scenery: To capture the evening or night scenery beautifully
Low Light: For dark scenes, such as at dusk
MENU
- 70 -
Set the maximum zoom ratio for the Motion Picture Recording Mode.
*/ /
The zoom magnification when [O.I.S.] is set to [Standard] and Level Shot Function is set to off.
/
The zoom magnification when [O.I.S.] is set to [Standard].
The larger the digital zoom magnification, the more the image quality is degraded.
This function cannot be used in Still Picture Recording Mode.
Switch the recording format of motion picture.
This function’s default setting is [AVCHD] mode.
[ZOOM MODE]
: [RECORD SETUP] # [ZOOM MODE] # desired setting
[i.Zoom OFF]: Up to 62k
*
[i.Zoom 90k]: This zoom function allows you to maintain high-definition
picture quality. (Up to 90k)
[D.Zoom 150k]: Digital zoom (Up to 150k)
[D.Zoom 3000k]: Digital zoom (Up to 3000k)
[REC FORMAT]
: [RECORD SETUP] # [REC FORMAT] # desired setting
[AVCHD]: Set the recording format to AVCHD. (l 2)
[MP4/iFrame]: Set the recording format to MP4/iFrame. (l 2)
MENU
HC-V550
HC-V550M
HC-V530
HC-V250
HC-V230
MENU
- 71 -
Switch the picture quality and recording format of the motion pictures to record. The recording
formats that can be set change according to [REC FORMAT] setting.
When [REC FORMAT] is set to [AVCHD]
A Favours image quality
B Favours Recording time
When [REC FORMAT] is set to [MP4/iFrame]
*1 This option allows you to record in 1080/50p (1920k1080/50 progressive), which is the highest
picture quality for this unit.
*2 [1080] and [720] are recording modes suitable for playing back or editing on a PC.
*3 [iFrame] is a format suitable for Mac (iMovie etc.). It is recommended for when using a Mac.
Recordable time using the battery (l 12)
This function’s default setting is [HG] mode.
Please refer to page 206 for details about approximate recordable time.
When the unit is moved a lot or moved quickly, or when a fast-moving subject is recorded,
mosaic-type noise may appear at playback.
[REC MODE]
: [RECORD SETUP] # [REC MODE] # desired setting
[PH]/[HA]/[HG]/[HE]:
(AB)
Set the recording format to 1080/50i.
[1080/50p]
*1
: Set the recording format to 1080/50p.
[1080]
*2
: Set the recording format to 1080/50p.
[720]
*2
: Set the recording format to 720/25p.
[iFrame]
*3
: Set the recording format to iFrame.
MENU
- 72 -
It is possible to continuously record motion picture to an SD card when there is no space available
in the built-in memory. (It allows you to record only to SD card from built-in memory.)
Set [MEDIA SELECT] to [Built-inMemory].
Set [REC FORMAT] to [AVCHD]. (l 70)
Insert an SD card.
is displayed on the screen. will disappear when space in the built-in memory is gone
and the recording to the SD card starts.
Relay Recording can only be performed once.
Combine the scenes that were relay-recorded using the [RELAY SCENE COMBINE] into
the SD card. (l 104, 112)
Once you have performed [RELAY SCENE COMBINE], you can use the Relay Recording
function again. If the [RELAY REC] is set to [ON] without performing the [RELAY SCENE
COMBINE], a message is displayed. You will be able to perform Relay Recording by touching
[YES], but you will not be able to perform the [RELAY SCENE COMBINE] after that.
Still pictures are recorded to the SD card after Relay Recording.
is displayed on the thumbnail display during the playback of the scene that was relay-
recorded on the built-in memory.
Detected faces appear with frames.
Up to 5 frames are indicated. Larger faces and faces nearer to the centre of the screen take
preference over others.
Prioritised face framing
Prioritised face framing is displayed as orange frames. Focus and adjustment of brightness will be
performed against the prioritised face framing.
The prioritised face frame is displayed only with Portrait Mode in Intelligent Auto Mode or
Intelligent Auto Plus Mode.
The white frame is for face detection only.
Focus will be set to prioritised face framing when the button is pressed halfway when
recording still pictures. Prioritised face framing will turn to green when the focus is set.
[RELAY REC]
: [RECORD SETUP] # [RELAY REC] # [ON]
[FACE FRAMING]
: [RECORD SETUP] # [FACE FRAMING] # desired setting
[PRIMARY]:
Only the prioritised face framing is displayed.
[ALL]:
All face detection framings are displayed.
[OFF]:
Cancel the setting.
HC-V550M
MENU
MENU
- 73 -
This function displays the horizontal/vertical tilt of the unit with the electronic level.
To correct the tilt
The horizontal tilt display A and vertical tilt display B appear yellow when there is a tilt, and
appear green when there is almost no tilt.
The maximum tilt display angles are approximately 45 o in horizontal direction and 10 o in vertical
direction.
The electronic level does not affect the actual recorded images.
The electronic level is not displayed when recording yourself or the LCD monitor is closed with
the screen facing outward.
Even when the tilt is in the corrected state, an error of approximately 1 o may occur.
In the following cases, the electronic level may not be displayed correctly:
j When moving this unit
j When pointing this unit up or down at an angle closer to perpendicular
If the unit continues to be tilted upside down from the normal horizontal position while recording
motion pictures, it is automatically put into recording pause.
The AGS function may activate and cause the unit to pause the recording if you are recording a
subject right above or right below you.
//
[LEVEL GAUGE]
: [RECORD SETUP] # [LEVEL GAUGE] # [ON]
(Horizontal direction) (Vertical direction)
When correcting the leftward tilt When correcting the downward tilt
[AGS]
: [RECORD SETUP] # [AGS] # [ON]
HC-V550
HC-V550M
HC-V530
MENU
MENU
- 74 -
You can record bright pictures even in dark places by slowing the shutter speed.
Switch to Manual Mode. (l 55)
The shutter speed is set to 1/25 or more depending on the surrounding brightness.
This function cannot be used in Still Picture Recording Mode.
When the shutter speed becomes 1/25, the screen may be seen as if frames are missed and
afterimages may appear.
Recording motion pictures with more vivid colours, using x.v.Colour™ technology.
Switch to Manual Mode. (l 55)
Set [REC FORMAT] to [AVCHD]. (l 70)
For more realistic colours, use an HDMI mini cable (supplied) with a TV that supports the
x.v.Colour™.
When motion pictures recorded while this function is turned [ON] are played back with a
TV not compatible with x.v.Colour™, colours may not be reproduced properly.
When these images are played back with devices other than ones compatible with x.v.Colour™, it
is recommended to record the images after this function is turned [OFF].
x.v.Colour™ is a name for devices that are compatible with the xvYCC format, an international
standard for expanded colour in motion pictures, and that follow the rules for signal transmission.
Message is displayed when this unit is moved rapidly.
When “CAMERA PANNING IS TOO FAST.” appears, move the unit slowly while recording.
Message will not appear while pausing the recording. (Message will appear even if it is pausing
the recording if [DEMO MODE] is set to [ON].)
[AUTO SLOW SHTR]
: [RECORD SETUP] # [AUTO SLOW SHTR] # [ON]
[Digital Cinema Colour]
: [RECORD SETUP] # [Digital Cinema Colour] # [ON]
[SHOOTING GUIDE]
: [RECORD SETUP] # [SHOOTING GUIDE] # [ON]
MENU
MENU
MENU
- 75 -
This is for reducing the wind noise coming into the built-in microphones.
Switch to Manual Mode. (l 55)
This function’s default setting is [ON].
When switching to Intelligent Auto Mode/Intelligent Auto Plus Mode, [WIND CUT] is set to [ON],
and the setting cannot be changed.
You may not see the full effect depending on the recording conditions.
Recording setting of the built-in microphone can be adjusted.
[MIC SETUP] will become [STEREO MIC] when the [REC FORMAT] is set to [MP4/iFrame].
[WIND CUT]
: [RECORD SETUP] # [WIND CUT] # [ON]
[MIC SETUP]
: [RECORD SETUP] # [MIC SETUP] # desired setting
[STEREO MIC]: Sound from two directions is recorded in 2 ch by forward-facing
stereo microphones.
[ZOOM MIC]: Sound is recorded with changing the directionality in conjunction
with the zoom operation. Sounds near the front of the unit are
recorded more clearly if you zoom in (close-up) and surrounding
sounds are recorded more realistically if you zoom out (wide angle).
MENU
MENU
- 76 -
When recording, the input level from the built-in microphones can be adjusted.
1 Select the menu.
2
(When [SET ]/[SET ] is selected)
Touch / to adjust.
Adjust the microphone input level so that the last
2 bars of the gain value are not red. (Otherwise, the sound
is distorted.) Select a lower setting for microphone input
level.
3 Touch [ENTER].
Touch [EXIT] to complete the setting.
(Microphone input level meter) appears on the
screen.
You cannot record with the audio completely muted.
Adjust the quality of the image while recording.
Adjust by outputting to a TV while adjusting the quality of the image.
This setting is retained when you change between Motion Picture Recording Mode and
Still Picture Recording Mode.
Switch to Manual Mode. (l 55)
1 Select the menu.
2 Touch the desired setting items.
3 Touch / to adjust settings.
[MIC LEVEL]
: [RECORD SETUP] # [MIC LEVEL] # desired setting
[AUTO]: AGC is activated, and the recording level is adjusted automatically.
[SET ]: The desired recording level can be set. AGC is activated, and sound
distortions are reduced.
[SET ]: The desired recording level can be set. Sounds are recorded in
natural quality.
MENU
A Left
B Right
C Microphone input level
[PICTURE ADJUST]
: [RECORD SETUP] # [PICTURE ADJUST]
[SHARPNESS]: Sharpness of the edge
[COLOUR]: Depth of the colour of the image
[EXPOSURE]: Brightness of the image
[WB ADJUST]: Picture colour balance
MENU
- 77 -
4 Touch [ENTER].
Touch [EXIT] to complete the settings.
appears on the screen.
The higher the number of pixels, the higher the clarity of the picture when printing.
Picture size and Maximum zoom ratio in Still Picture Recording
Mode
Aspect ratio will change depending on the picture size.
*1 Extra Optical Zoom cannot be used. The maximum zoom magnification is 62k.
*2 Extra Optical Zoom cannot be used. The maximum zoom magnification is 52k.
*3 Extra Optical Zoom cannot be used. The maximum zoom magnification is 51k.
This function’s default settings are [ 10M] in Still Picture Recording Mode.
Still pictures taken in Motion Picture Recording Mode are (1920k1080).
The recording will become longer depending on the picture size.
Please refer to page 207 for details about the number of recordable pictures.
When the picture size is [ 7.4M], [ 0.3M], [ 7.7M] or [ 2M] black bands may
appear on the left and right of the screen.
The edges of still pictures recorded on this unit with a 16:9 aspect ratio may be cut at printing.
Check the printer or photo studio before printing.
[PICTURE SIZE]
: [PICTURE] # [PICTURE SIZE] # desired setting
[16:9]: Aspect ratio of high-definition television, etc.
[4:3]: Aspect ratio of 4:3 television
[3:2]: Aspect ratio of conventional film camera or prints (such as L-size print)
Picture size Aspect ratio Extra Optical Zoom (l 41)
[ 10M] 4224k2376
[16:9]
*1
[ 2.1M] 1920k1080
*1
[ 7.4M] 3136k2352
[4:3]
*2
[ 0.3M] 640k480 100k
[ 7.7M] 3408k2272
[3:2]
*3
[ 2M] 1728k1152
*3
MENU
16:9
16:9
4:3
4:3
3
:
2
3
:
2
16:9
2.1M
4:3
4:3
3
:
2
3
:
2
- 78 -
You can add a shutter sound when recording still pictures.
No shutter sound is emitted in Motion Picture Recording Mode.
[SHTR SOUND]
: [PICTURE] # [SHTR SOUND] # desired setting
: Volume low
: Volume high
[OFF]: Cancel the setting.
MENU
- 79 -
Motion picture playback using operation icon
For details on the basic playback operations, refer to page 27.
Advanced (Playback)
Playback Operations
Playback operation
Playback display Operating steps
Skip Playback
(to the start of a
scene)
During Playback Touch the LCD monitor and slide from right
to left (from left to right) during playback.
Slow-motion
Playback
During Pause
With the playback paused, continue
touching .
( is for slow rewind playback)
Playback is slow while touching.
Normal playback is restored when you touch
.
When Slow-motion pictures are played back
in reverse, they will be shown continuously
at approximately 2/3
rd
the speed of normal
playback (intervals of 0.5 seconds).
Slow-motion Playback of scenes recorded in
MP4 [1080] or [720] will be shown in
intervals of 0.5 second.
Slow-motion Playback of iFrame scenes and
scenes saved in MP4 (Low Quality) will be
shown in intervals of 1 second.
Frame-by-frame
Playback
With the playback paused, touch .
(Touch to advance the frames one at a
time in the reverse direction.)
Normal playback is restored when you touch
.
When the frames are advanced one at a
time in the reverse direction, they will be
shown in intervals of 0.5 seconds.
Frame-by-frame Playback of scenes
recorded in MP4 [1080] or [720] will be
shown in intervals of 0.5 second.
Frame-by-frame Playback of iFrame scenes
and scenes saved in MP4 (Low Quality) will
be shown in intervals of 1 second.
- 80 -
Creating still picture from motion picture
A single frame from the recorded motion picture can be saved as a still picture.
For scenes recorded in AVCHD or MP4/iFrame, still pictures in (1920k1080) are recorded,
and for scenes saved in MP4 (Low Quality), still pictures in (640k360) are recorded.
Press the button fully at the location to be saved as a still picture during
playback.
It is convenient to use Pause, Slow-motion Playback and Frame-by-frame Playback.
Date the motion picture was recorded will be registered as date of the still picture.
Quality will be different from the normal still picture.
Playback operation
Playback display Operating steps
Direct Playback
During Pause Touch the direct playback bar or slide it
while touching.
The playback skips to the position touched
or slid to while touching.
2.1M
0.2M
- 81 -
Highlight & Time Frame Index
An image of one scene is displayed as a thumbnail at set search condition. Scene can be played
back from any midway point of the scene you wish to see.
Operate the zoom lever to side and change over the
thumbnail display to Highlight & Time Frame Index. (l 28)
1 Touch .
To display the next (previous) page:
j Slide the thumbnail display upward (downward) while
touching it.
j Touch (up) / (down) on the thumbnail scroll lever. (l 28)
2 Touch the desired search condition.
* It cannot be set while playing back MP4/iFrame scenes.
When select [FACE], it will select the portion for which Face Recognition was performed from the
scenes judged to be clearly recorded. This will then be displayed as a thumbnail.
A portion judged to be clearly recorded will be detected and displayed in thumbnail if you select
[HIGHLIGHT].
3 (When [MINUTES] is selected)
Touch / to set the time.
It can be set up to a maximum of 60 minutes.
Touch [ENTER].
4 Touch the thumbnail to be played back.
Next (Previous) thumbnail can be displayed by touching / .
Repeat Playback
Playback of the first scene starts after playback of the last scene finishes.
The indication appears on the full screen views.
All the scenes are played back repeatedly. (When playing back motion pictures by date, all the
scenes on the selected date are played back repeatedly.)
[3 SECONDS]/[6 SECONDS]/[12 SECONDS]/[MINUTES]/[FACE]
*
/[HIGHLIGHT]
*
: [VIDEO SETUP] # [REPEAT PLAY] # [ON]
MENU
- 82 -
Resuming the previous playback
If playback of a scene was stopped halfway, the playback can be resumed from where it was
stopped.
If playback of a motion picture is stopped, appears on the thumbnail view of the stopped
scene.
The memorised resume position is cleared if you turn off the unit or press the recording/playback
button.
(The setting of [RESUME PLAY] does not change.)
Zooming in on a still picture during playback
(Playback zoom)
You can zoom in by touching a still picture during playback.
1 Touch and hold the part you wish to zoom in on during still picture playback.
It will display enlarged in order of normal display (k1) # k2 # k4. Touch and hold the screen to
zoom in from the normal display (k1) to k2. Touch the screen to zoom in from k2 to k4.
The still picture is zoomed in on, centring on the part you touched.
2 Move to the zoomed in position by touching /
/ / or slide while touching the screen.
The location of the zoom displays for about 1 second when
zooming in (zooming out) or moving the displayed location.
Zooming out from the zoomed still picture
Touch to zoom out. (k4 # k2 # k1)
Touch to return to normal playback (k1).
You can also perform zoom operations using the zoom lever.
The more picture is enlarged, the more its quality deteriorates.
: [VIDEO SETUP] # [RESUME PLAY] # [ON]
MENU
2X
A Displayed location of
the zoom
- 83 -
Playing back motion pictures/still pictures by date
The scenes or the still pictures recorded on the same day can be played back in succession.
1 Touch the date select icon. (l 19)
2 Touch the playback date.
The scenes or the still pictures recorded on the date selected are displayed as thumbnails.
3 Touch the scene or the still picture to be played back.
If you press the recording/playback button when using the playback by date function, the date
selection will be cancelled.
In cases such as those described below, scenes and still pictures are grouped separately on the
date list, and –1, –2… may be added after the date:
j When the number of scenes exceeds 99
j When the number of still pictures exceeds 999
j When [REC MODE] in [AVCHD] is changed
j When recorded in Creative Control Mode.
j When recorded in Endless Loop Recording
j //
When recorded in Home Monitor function. (l 138)
j When saved in Manual Edit (l 92)
j When [NUMBER RESET] is performed
The following scenes and still pictures are grouped separately on the date list, and icons are
displayed according to the category:
j When [REC MODE] in [MP4/iFrame] mode is changed: / /
j //
Still pictures recorded in Stop Motion Animation Assist Mode (l 54):
j Still pictures created from motion pictures:
j Scenes saved in Highlight Playback (l 89):
j ///
Scenes saved in MP4 (Low Quality) (l 103):
Scenes saved in MP4 (Low Quality) (l 103, 112):
Advanced (Playback)
Various playback functions
ALL
A Date select icon
HC-V550
HC-V250
HC-V550
HC-V530
HC-V550 HC-V530 HC-V250
HC-V230
HC-V550M
- 84 -
Highlight Playback
Part that was recognised as clearly recorded is extracted from multiple scenes, and it can be played
back or stored in a short time with effects and music added.
It is also possible to create an original Highlight Playback by checking your favourite scenes and
setting up to extract those scenes.
Highlight Playback cannot be used for MP4/iFrame scenes.
1 Touch . (l 19)
2 Touch the desired effect.
The scenes matching the effect will be extracted and displayed in the thumbnail view.
Effects such as fade, slow-motion, still (pause), or digest playback are inserted.
The date at playback is the date that was last recorded in an extracted scene.
To change the settings, refer to page 86.
3 Touch in the thumbnail view.
4 Select the playback operation. (l 28)
When the playback is finished or stopped, the screen to select [REPLAY], [SAVE] (l 89),
[SELECT AGAIN] or [EXIT] is displayed. Touch the desired item.
If you press the recording/playback button when using the Highlight Playback function, the
Highlight Playback will be cancelled.
Skip Playback, Slow-motion Playback, Frame-by-frame Playback and Direct Playback are not
possible.
Motion pictures recorded with Creative Control Mode are not available for Highlight Playback.
[POP]: Recommended for party scene.
[NATURAL]: Recommended for scenery.
[CLASSICAL]: Recommended for slow moving scene.
[DYNAMIC]: Recommended for fast moving scene such as sports scene.
[CUSTOM]: Set the combination of the effect and the music. (l 85)
ALL
- 85 -
Setting up the custom effect
It is possible to enjoy the Highlight Playback with your favourite effect by setting up the combination
of an image effect and music.
1 Touch [CUSTOM].
2 Touch [EFFECT SETUP] or [MUSIC SELECT].
3
(When [EFFECT SETUP] is selected)
Touch the desired effect.
When [EFFECT SETUP] is changed, [MUSIC SELECT] will be
set the same as [EFFECT SETUP]. (To set [EFFECT SETUP]
and [MUSIC SELECT] to different settings, change
[MUSIC SELECT] after setting [EFFECT SETUP].)
(When [MUSIC SELECT] is selected)
Touch the desired sound.
When [EFFECT SETUP] is set to [NONE], you will be able to select [NO MUSIC]. When [NO
MUSIC] is selected, the audio recorded at the time of shooting is played back.
(To test the music audio)
Touch [START].
Touch the other music option to change the music to be tested.
When you touch [STOP], the music playback stops.
4 Touch [ENTER].
- 86 -
Touch [SET] to select the item to change.
*1 If you touch [SET] of Highlight Playback when the Baby Calendar is displayed, [SELECT DATE]
and [SELECT SCENES] will not be available. (l 93)
*2 If you touch [SET] of Highlight Playback when the Baby Calendar is displayed, these items will
not be displayed. (l 93)
When you have finished changing the settings, touch [EXIT].
Scene setting
1 (Only when Highlight Playback is started from [ALL AVCHD])
Touch the recording format of the scene to be played back.
2 Touch [SELECT DATE] or [SELECT SCENES].
3
(When [SELECT DATE] is selected)
Touch the date to be played back.
A maximum of 7 days can be selected.
When touched, the date is selected and surrounded by red. Touch the date again to cancel the
operation.
(When [SELECT SCENES] is selected)
Touch the scenes to be played back.
Up to 99 scenes can be selected in succession.
When touched, the scene is selected and is displayed. Touch the scene again to cancel the
operation.
4 Touch [Enter]/[ENTER].
Playing back with the settings changed
[SCENE SETUP]
*1
:
Select the scene or date to be played back.
[FAVOURITE SCENE SETUP]
*2
:
Set up the favourite scenes. (l 87)
[FAVOURITE SCENE PLAY]
*2
:
Set up if the favourite scenes are to be included in the Highlight
Playback or not. (l 87)
[PRIORITY SETUP]:
Select the target to give priority to play back. (l 87)
[PLAYBACK TIME]:
Select the time to play back. (l 88)
[TITLE SETUP]:
Select the cover image and enter the title.
They are displayed at the beginning. (l 88)
[1080/50p]/[1080/50i]
- 87 -
Checking the favourite scenes
1 Touch the scenes to be played back.
2 Touch [Add] and add the favourite part.
Approximately 4 seconds before and after touching [Add] will
be added as favourite.
Number of favourite scenes that can be added are 1 to 14.
(Number of scenes that can be added differs depending on the
scenes selected.)
Favourite check display (A) is displayed in orange, and
favourite check display B is displayed on the slide bar.
To cancel the favourite, play back to the position checked as
favourite, and touch [Cancel].
It is convenient to use Slow-motion Playback and Frame-by-
frame Playback. (l 79)
3 Touch and stop the playback.
It will return to the thumbnail display screen and ¡ is displayed
on the scenes added as favourite scenes.
4 Touch [Return].
All the scenes checked as favourite may not be played back depending on the playback time
setting. (l 88)
To clear the favourite scenes from the thumbnail display
1 Touch [Reset].
2 Touch [RESET ALL] or [RESET SELECTED].
The check on all the favourite scenes will be cleared when
[RESET ALL] is selected.
3 (When [RESET SELECTED] is selected in Step 2)
Touch the scene to be cleared.
Playing back the favourite scenes
Touch [ON] or [OFF].
Priority settings
Touch [NONE] or [FACE].
If you touch [FACE], priority is given to the part detected as a face.
0h01m30s0h01m30s0h01m30s
0h01m30s0h01m30s0h01m30s
[ON]: Include the scenes added in the [FAVOURITE SCENE SETUP] into the Highlight
Playback.
[OFF]: Do not include the scenes added in the [FAVOURITE SCENE SETUP] into the
Highlight Playback.
- 88 -
Playback time setting
Touch the playback time.
The playback time of [AUTO] is a maximum of approx. 5 minutes.
Playback time may become shorter than the setting, or it may not even be played back if the part
recognised as clearly recorded is short.
Setting up the title
1 Touch / to select your favourite title sheet.
Title and date will not be displayed when [NONE] is selected.
2 Touch [TITLE].
3 Enter the title.
Touch the text entry icon in the centre of the screen and enter
the title.
After entering the title, touch [Enter].
Entering text
The characters can be conveniently input without moving the cursor when the [Auto Cursor
Position] is set to [ON]. (l 37)
A maximum of 18 characters can be entered.
4 Touch [ENTER] to end registration.
The date of the first scene of the Highlight Playback will be displayed as the date.
The entered title will be cleared when the unit is turned off or the Highlight Playback is finished.
[APPROX 90 SEC.]/[APPROX 3 MIN.]/[AUTO]
[NONE]/[PICTURE 1]/[PICTURE 2]/[PICTURE 3]/[PICTURE 4]
A Text entry icon
Icon Description of operation
[A] etc. Enters a character.
/
Moves the cursor to left or right.
[A/a/1] Switches between [A]/[a] (alphabet) and [&/1] (symbols/numbers).
Enters a space.
[Delete]
Deletes a character.
Deletes the previous character if the cursor is in an empty space.
[Enter] Ends text entry.
- 89 -
The scenes put together as a Highlight Playback can be saved as a single scene.
///
The recorded scenes can be saved in the SD card.
The recorded scenes can be saved in the built-in memory.
1 Stop the playback of the Highlight Playback or wait until the Highlight
Playback is finished.
2 Touch [SAVE].
3 Select the format to save.
When [QUALITY (AVCHD)] is selected, scenes recorded in 1080/50p are converted to 1080/50i
(picture quality [HA] of [REC MODE]) and saved.
If you select [1080/50i] in [SCENE SETUP] (l 86), motion pictures are recorded in [HA]
regardless of [REC MODE] ([PH]/[HA]/[HG]/[HE]) of a scene.
4 Touch [YES].
5
///
Touch [EXIT].
Touch [COPY] or [EXIT].
The Highlight Playback saved in the built-in memory can be copied to the SD card. To copy
to the SD card, select [COPY].
Operate according to the message and touch [EXIT] at the end.
is displayed on the thumbnail of the scenes saved by the Highlight Playback.
Saving the Highlight Playback
[QUALITY (AVCHD)]: It will be saved in high-definition image quality.
[Compatibility (MP4/High)]: It will be saved with an image quality of 1280k720/25p,
allowing you to upload it on the Internet in higher image
quality. The format supports playback on a PC.
[Compatibility (MP4/Low)]: It will be saved with an image quality of 640k360/25p,
allowing you to upload it on the Internet faster. The format
supports playback on a PC.
HC-V550 HC-V530 HC-V250
HC-V230
HC-V550M
HC-V550 HC-V530 HC-V250
HC-V230
HC-V550M
- 90 -
Manual Edit
You can join desired scenes or parts of scenes in the order they were recorded to play back or save
as a single scene with music added.
Manual Edit cannot be used for MP4/iFrame scenes.
1 Select the menu.
2 Touch [1080/50p] or [1080/50i].
Touch [Enter].
Thumbnails are displayed by each scene.
3 Select the scene or part of the scene to play back, and set the music.
To select a scene (l 91)
To select part of a scene (l 91)
To set the music (l 92)
Touching [Return] after selecting a scene may cancel the selected scene.
4 Touch [Enter].
5 Touch [YES], and select the playback operation for the edited scene. (l 28)
In the following cases, the screen for selecting [PREVIEW], [SAVE] (l 92), [SELECT AGAIN],
and [EXIT] is displayed. Touch the desired item.
j Touch [NO]
j Playback finishes
j Stop playback
You can also select combinations of scenes and parts of scenes.
You can select up to 99 scenes. (Each 3 second thumbnail of part of a scene is treated as a
single scene.)
You can create a combined scene of up to about 6 hours long.
Skip Playback, Slow-motion Playback, Frame-by-frame Playback and Direct Playback are not
possible.
///
When saving a manually edited scene, check the free space on the SD card.
When saving a manually edited scene, check the free space on the built-in memory.
Before selecting the scene, check the table below and create sufficient free space for saving it.
(Approximate free space requirements for saving a manually edited scene)
“h” is an abbreviation for hour, “min” for minute and “s” for second.
: [EDIT SCENE] # [MANUAL EDIT]
Saving format
Total time of an edited
scene
Free space required
[QUALITY (AVCHD)]
30 min Approx. 4 GB
1 h Approx. 8 GB
[Compatibility (MP4/High)]
30 min Approx. 2 GB
1 h Approx. 4 GB
[Compatibility (MP4/Low)]
30 min Approx. 0.4 GB
1 h Approx. 0.8 GB
MENU
HC-V550 HC-V530 HC-V250
HC-V230
HC-V550M
- 91 -
To select a scene
Touch the scene to be played back.
The scene selection is made as you touch it, and the indication appears on the thumbnail. To
cancel the operation, touch the scene again.
When part of a scene has been selected, the indication appears on the thumbnail. If you
touch the thumbnail, the scene will be displayed by 3 second thumbnails.
Next (previous) page is displayed by touching / .
To select part of a scene
1 Touch [3 sec].
To cancel the operation, touch it again.
2 Touch the desired scene.
The touched scene is displayed by 3 second thumbnails.
3 (To select a single thumbnail)
Touch the thumbnail of the part you want to play back.
The thumbnail selection is made as you touch it, and the indication (white) appears on the
thumbnail. To cancel the selection, touch the thumbnail again.
Next (previous) thumbnail is displayed by touching / .
Touching [Return] when the thumbnail has been selected returns you to the screen that displays
the thumbnails of scenes. The indication appears on the thumbnail of the scene
containing the selected part.
4 (To select thumbnails by specifying a range)
Touch [Range].
To cancel the operation, touch it again.
5 (To select thumbnails by specifying a range)
Touch the range (start and finish points) you want
to play back.
The range between start and finish points are selected, and the
indication (white) appears on the thumbnails.
To cancel the selected thumbnails, from among the thumbnails
with the indication (white), touch the range (start and finish
points) you want to cancel.
If you touch [Enter]/[Return]/[Music]/[Range] when a start point
has been selected, the start point thumbnail will be cancelled.
Touching [Return] when the thumbnail has been selected
returns you to the screen that displays the thumbnails of
scenes. The indication appears on the thumbnail of the scene containing the selected
part.
You can also select multiple ranges within the same scene.
Next (previous) thumbnail is displayed by touching / .
To select other scenes, touch [Return] to return to the screen that displays the thumbnails of
scenes, and perform the following operations.
j When selecting a scene:
Touch the desired scene.
j When selecting part of a scene:
Perform the operations in Steps 1-5.
3S
3S
A Start point
B Finish point
3S
- 92 -
To set the music
1 Touch [Music].
2 Touch the desired sound.
When [NO MUSIC] is selected, the audio recorded at the time of shooting is played back.
(To test the music audio)
Touch [START].
Touch the other music option to change the music to be tested.
When you touch [STOP], the music playback stops.
3 Touch [ENTER].
To save a manually-edited scene
You can save manually edited scenes as a single scene.
///
The recorded scenes can be saved in the SD card.
The recorded scenes can be saved in the built-in memory.
1 Stop the playback of a manually-edited scene or wait until the playback is
finished.
2 Touch [SAVE].
3 Select the format to save.
When [QUALITY (AVCHD)] is selected, scenes recorded in 1080/50p are converted to 1080/50i
(picture quality [HA] of [REC MODE]) and saved.
Scenes recorded in 1080/50i are recorded in [HA] regardless of [REC MODE] ([PH]/[HA]/[HG]/
[HE]) of a scene.
4 Touch [YES].
If you are using the battery, a message recommending that you use the AC adaptor will be
displayed. To start the saving operation, touch [START].
5 ///
Touch [EXIT].
Touch [COPY] or [EXIT].
Scenes saved in the built-in memory can be copied to the SD card. To copy to the SD card,
select [COPY].
Operate according to the message and touch [EXIT] at the end.
You can save scenes even when using the battery, but we recommend that you use the AC
adaptor.
For information on the approximate free space requirements for saving a manually edited scene,
refer to page 90.
[QUALITY (AVCHD)]: It will be saved in high-definition image quality.
[Compatibility (MP4/High)]: It will be saved with an image quality of 1280k720/25p,
allowing you to upload it on the Internet in higher image
quality. The format supports playback on a PC.
[Compatibility (MP4/Low)]: It will be saved with an image quality of 640k360/25p,
allowing you to upload it on the Internet faster. The format
supports playback on a PC.
HC-V550
HC-V530
HC-V250
HC-V230
HC-V550M
HC-V550
HC-V530
HC-V250
HC-V230
HC-V550M
- 93 -
Baby Calendar
When a baby’s birthday and name are registered, scenes recorded since the baby’s birthday are
displayed as thumbnails for each age in months.
Scenes recorded before the birthday are not displayed.
Scenes with no baby in them are also displayed.
You can register up to 3 babies.
1 Touch .
2 (When registering for the first time)
Enter the baby’s birthday.
Touch the date to be set, then set the desired value using / .
The year can be set between 2000 and 2039.
Touch [Enter].
3 (When registering for the first time)
Touch [YES], and enter the baby’s name.
If you touch [NO], the Baby Calendar will be displayed without the baby’s name registered.
([Baby 1] is displayed.)
Input method is same operation as for setting up the title. (l 88)
After entering the name, touch [Enter].
A maximum of 9 characters can be entered.
4 Check the Baby Calendar.
The name of the registered baby and its age in months are
displayed.
You can switch the age in months display by touching / .
When there are only scenes recorded in two different ages in
months, the thumbnail for the previous age in months will not be displayed.
Except for months with no recordings, the age in months display is available for each month.
If you touch the name display, the screen for selecting a registered baby is displayed. From
among the 3 registered babies, select the baby you want to display and touch [ENTER].
If you touch a name with no registered birthday ([Baby 1]/[Baby 2]/[Baby 3]), you can register a
new baby. Perform Steps 2-3.
MENU
: Changes the age in months display to that of
the previous month
If you touch this icon when the youngest age in months is
displayed, the oldest age in months will be displayed.
: Changes the age in months display to that of
the next month
If you touch this icon when the oldest age in months is
displayed, the youngest age in months will be displayed.
MENU

A Name display
B Age in months display
C Thumbnail for the
previous age in months
D Thumbnail for the next
age in months
- 94 -
5 Touch the thumbnail in the centre.
The thumbnails of the scenes recorded in the same age in months are displayed. Touch the
desired scene to select the playback operation. (l 28)
The thumbnail display cannot be set to 1 scene/20 scenes display or to the Highlight & Time
Frame Index.
To return to the normal thumbnail display
Touch the while the Baby Calendar is displayed.
To change/add a baby’s registered details
1 Touch the name display on the Baby Calendar (l 93) or select the menu.
2 Touch the name of the baby whose details are to be changed.
When [Baby 1]/[Baby 2]/[Baby 3] is displayed, the birthday and name or name only are not
registered.
3 Touch the desired item.
The setting method is the same as when registering for the first time. (l 93)
4 Touch [ENTER].
The Baby Calendar of the registered baby is displayed.
To delete a baby’s registered details
1 Touch the name display on the Baby Calendar (l 93) or select the menu.
2 Touch the name of the baby whose details are to be deleted.
3 Touch [DELETE].
To delete the registered details of other babies, repeat Steps 2 to 3.
When the Baby Calendar is displayed, the following operations are not available:
j [SCENE PROTECT]
j [SECTION DELETE]
j [DIVIDE]
j [MANUAL EDIT]
j [SPLIT&DELETE]
j [CONVERT TO MP4]
j [RELAY SCENE COMBINE]
j [RELAY INFO CANCEL]
: [VIDEO SETUP] # [Baby Calendar Setup]
[Name]: Register/change the name.
[Birthday]: Register/change the birthday.
: [VIDEO SETUP] # [Baby Calendar Setup]
MENU
MENU
HC-V550M
- 95 -
Changing the playback settings and playing back the
slide show
1 Touch . (l 19)
2 (Only when you would like to change the settings)
Touch [SET] to select the item to change.
*/ /
Setting is not possible when the operation in Step 1 is performed while thumbnails in the Stop
Motion Animation Assist Mode are displayed. (l 96)
3 (When [DATE SETUP] is selected)
Touch the playback date.
(When [SLIDES INTERVAL] is selected)
Touch the interval of playback for the slide show.
(When [EFFECT SETUP] is selected)
Touch the desired effect.
When [EFFECT SETUP] is changed, [MUSIC SELECT] will be
set the same as [EFFECT SETUP]. (To set [EFFECT SETUP]
and [MUSIC SELECT] to different settings, change
[MUSIC SELECT] after setting [EFFECT SETUP].)
[SLIDES INTERVAL] cannot be set, when [EFFECT SETUP] is
set.
(When [MUSIC SELECT] is selected)
Touch the desired sound.
Touch [ENTER].
(To test the music audio)
Touch [START] and start the audio testing.
ALL
[DATE SETUP]: Select the date to be played back.
[SLIDES INTERVAL]
*
: Select the interval between still pictures at playback.
[EFFECT SETUP]
*
: Select the effect for playback.
[MUSIC SELECT]: Select the music to be played on playback.
[SHORT]: Approx. 1 second
[NORMAL]: Approx. 5 seconds
[LONG]: Approx. 15 seconds
HC-V550
HC-V550M
HC-V530
- 96 -
Touch the other music option to change the music to be tested.
When you touch [STOP], the music playback stops.
4 Touch [START].
5 Select the playback operation. (l 28)
When the playback is finished or stopped, the screen to select [REPLAY], [SELECT AGAIN] or
[EXIT] is displayed. Touch the desired item.
Playing back still pictures recorded in Stop Motion
Animation Assist Mode as a slide show
[HC-V550]/[HC-V550M]/[HC-V530]
For details on recording in Stop Motion Animation Assist Mode, refer to page 54.
1 Touch .
The recording group created most recently in Stop Motion
Animation Assist Mode is displayed.
Touching again, returns the display to the normal
thumbnail display.
2 Touch a thumbnail to play back the slide show.
The thumbnail display cannot be set to 9 scenes or 20 scenes
display.
3 Select the playback operation. (l 28)
The display returns to the thumbnail display when playback is
finished or stopped.
To play back other recording groups:
You can play back other recording groups by touching the date select icon.
1 Touch the date select icon.
2 Touch the playback date.
Touch a date with the indication.
Recording groups in the selected date are displayed.
Touch a thumbnail to play back the slide show.
Slide shows can be played back with settings changed. (l 95)
The recording group played back as a slideshow cannot be saved as a single scene.
MENU
NEW
MENU
NEW
MENU
A Date select icon
- 97 -
¬ Press the recording/playback button to switch this unit to the Playback Mode.
To delete the scene or still picture being played back
Touch while scenes or still pictures to be deleted
are being played back.
To delete scenes or still pictures from the thumbnail display
Switch to the thumbnail display of the scenes or still pictures to delete. (l 27)
1 Touch . (l 19)
When the thumbnail display is 1 scene display or Highlight &
Time Frame Index, the scene or still picture being displayed is
deleted.
//
When the thumbnails of still pictures recorded in Stop Motion
Animation Assist Mode are displayed, the still pictures cannot be deleted. (l 96)
2 Touch [ALL SCENES], [MULTI] or [SINGLE].
All the scenes or still pictures displayed as thumbnails will be
deleted by selecting [ALL SCENES].
(In case of playing back scenes or still pictures by date, all the
scenes or still pictures on the selected date will be deleted.)
Protected scenes/still pictures cannot be deleted.
3 (When [MULTI] is selected in Step 2)
Touch the scene/still picture to be deleted.
When touched, the scene/still picture is selected and the indication appears on the thumbnail.
Touch the scene/still picture again to cancel the operation.
Up to 99 scenes can be selected to be deleted.
(When [SINGLE] is selected in Step 2)
Touch the scene/still picture to be deleted.
4 (When [MULTI] is selected in Step 2)
Touch [Delete].
To continuously delete other scenes/still pictures, repeat Steps 3-4.
Advanced (Playback)
Deleting scenes/still pictures
Deleted scenes/still pictures cannot be restored, so perform appropriate confirmation of
the contents before proceeding with deletion.
0h01m30s0h01m30s0h01m30s
HC-V550
HC-V550M
HC-V530
- 98 -
When you stop deleting halfway:
Touch [CANCEL] while deleting.
The scenes or still pictures that have already been deleted when the deletion is cancelled cannot
be restored.
To complete editing:
Touch [Return].
You can also delete scenes by touching , selecting [EDIT SCENE] # [DELETE] # [ALL
SCENES], [MULTI] or [SINGLE].
You can also delete still pictures by touching , selecting [PHOTO SETUP] # [DELETE] #
[ALL SCENES], [MULTI] or [SINGLE].
//
When the thumbnails of still pictures recorded in Stop Motion Animation Assist Mode are
displayed, the still pictures cannot be deleted from the menu. (l 96)
During Highlight Playback, scenes/still pictures cannot be deleted.
Scenes that cannot be played back (the thumbnails are displayed as ) cannot be deleted.
In case of [ALL SCENES], the deletion may take time if there are many scenes or still pictures.
If you delete scenes recorded on other products or still pictures conforming to DCF standard with
this unit, all the data related to the scenes/still pictures may be deleted.
When still pictures recorded on an SD card by other products are deleted, a still picture (other
than JPEG) that cannot be played back on this unit, may be erased.
MENU
MENU
HC-V550
HC-V550M
HC-V530
- 99 -
Deleting part of a scene (AVCHD)
Unnecessary part of an AVCHD scene can be deleted.
The deleted scenes cannot be restored.
Press the recording/playback button to switch this unit to the Playback Mode, and touch
the play mode select icon. Then, select the AVCHD scene. (l 27)
1 Select the menu.
2 Touch the scene with a part to delete.
3 Set the section to delete by touching and sliding
the top and bottom section selection buttons
.
It is convenient to use Slow-motion Playback and Frame-by-
frame Playback. (l 79)
4 Touch [ENTER].
5 Confirm (play back) the scene after editing by touching [YES].
A confirmation message appears when [NO] is touched. Proceed to Step 7.
6 Stop the playback.
A confirmation message appears.
7 Touch [ENTER].
Repeat Steps 2-7 to continuously delete parts from other scenes.
To complete editing
Touch [Return].
Deleting a part of a scene cannot be performed when there are 99 scenes in a single date.
It may not be possible to delete part of a scene with a short recording time.
The scene will be divided into two scenes when the middle part of a scene is deleted.
The relay information is deleted when part of a scene that was relay recorded is deleted, making
it impossible to perform the Relay scene combining. (l 104)
: [EDIT SCENE] # [SECTION DELETE]
MENU
0h00m15s0h00m15s0h00m15s
HC-V550M
- 100 -
Dividing a scene (AVCHD)
It is possible to divide an AVCHD scene.
Any unwanted parts in the scene can be deleted after dividing.
Press the recording/playback button to switch this unit to the Playback Mode, and touch
the play mode select icon. Then, select the AVCHD scene. (l 27)
1 Select the menu.
2 Touch the scene to be divided.
3 Touch to set the dividing point.
It is convenient to use Slow-motion Playback and Frame-by-
frame Playback. (l 79)
Touch [YES] to continue dividing the same scene. To continue
dividing other scenes, touch [NO] and repeat Steps 2-3.
4 Touch [Return] to complete dividing.
Unwanted parts can be deleted. (l 97)
To delete all the divided points
The scenes that were deleted after division cannot be recovered.
You cannot divide a scene if the number of scenes of a given date would exceed 99 scenes.
It may not be possible to divide scenes with a short recording time.
Data that has been recorded or edited on another device cannot be divided and the divided points
cannot be deleted.
: [EDIT SCENE] # [DIVIDE] # [SET]
: [EDIT SCENE] # [DIVIDE] # [CANCEL ALL]
MENU
0h01m30s
0h01m30s
0h01m30s
MENU
- 101 -
Dividing a scene to partially delete (MP4/iFrame)
Divide the MP4/iFrame scenes, and delete unnecessary parts.
This divides the recorded scenes in two and deletes the front half or back half.
The scenes deleted by dividing cannot be restored.
Press the recording/playback button to switch this unit to the Playback Mode, and touch
the play mode select icon. Then, select the MP4/iFrame scene. (l 27)
1 Select the menu.
2 Touch the scene to be divided.
3 Touch to set the dividing point.
It is convenient to use Slow-motion Playback and Frame-by-
frame Playback. (l 79)
Set the dividing point so there will be 2 seconds or more for the
part for deletion, and 3 seconds or more for the part to be kept.
4 Touch the part for deletion.
5 Touch [YES] and confirm (play back) the part for deletion.
A confirmation message appears when [NO] is touched. Proceed to Step 7.
6 Stop the playback.
A confirmation message appears.
7 Touch [YES].
To continue dividing and deleting other scenes, repeat Steps 2-7.
To complete editing
Touch [Return].
It may not be possible to divide scenes with a short recording time.
The actual division may slightly slip off the previously designated dividing point.
: [EDIT SCENE] # [SPLIT&DELETE
]
MENU
0h01m30s
0h01m30s
0h01m30s
- 102 -
Protecting scenes/still pictures
Scenes/still pictures can be protected so that they are not deleted by mistake.
(Even if you protect some scenes/still pictures, formatting the media will delete them.)
Press the recording/playback button to switch this unit to the Playback Mode.
1 Select the menu.
* [TRANSFER/PROTECT] is displayed when using the Eye-Fi card that is set as the selected
transfer setting device in advance on the computer.
2 Touch the scene/still picture to be protected.
When touched, the scene/still picture is selected and the indication appears on the
thumbnail. Touch the scene/still picture again to cancel the operation.
Touch [Return] to complete the settings.
//
When the thumbnails of still pictures recorded in Stop Motion Animation Assist Mode are
displayed, protection cannot be set on the still pictures.
: [VIDEO SETUP] or [PHOTO SETUP] # [SCENE PROTECT]
*
MENU
HC-V550
HC-V550M
HC-V530
- 103 -
Before copying, convert AVCHD or MP4 scenes to those with the image quality (MP4 (High Quality):
1280k720/25p or MP4 (Low Quality): 640k360/25p) that supports playback on a PC or uploading
on the internet.
Scenes recorded in iFrame or saved as MP4 (Low Quality) cannot be converted to MP4.
1 Select the menu.
2 Touch the scene you want to convert.
The scene selection is made as you touch it, and the indication appears on the thumbnail. To
cancel the operation, touch the scene again.
You can select up to 99 scenes in succession.
3 Touch [Enter].
4 Select the quality after conversion.
MP4 scenes after conversion are saved to the same media as the scenes before conversion.
To continue converting scenes to MP4, repeat steps 2 to 4.
To stop converting to MP4 halfway
Touch [CANCEL] during format conversion.
To exit the MP4 conversion
Touch [Return].
A scene recorded over a long time may take time.
When converting and copying the scenes recorded in AVCHD to an MP4 scene, the scene
exceeding approximately 20 minutes is automatically divided.
The settings for the copied motion pictures will be cleared if the protected motion pictures are
copied.
Advanced (Playback)
Convert to MP4
: [EDIT SCENE] # [CONVERT TO MP4]
[High Quality (1280k720)]
*
: Convert to MP4 (1280k720/25p) and copy.
[Low Quality (640k360)]: Convert to MP4 (640k360/25p) and copy.
* Scenes recorded in MP4 [720] and scenes saved in MP4 (High Quality) cannot be converted
and copied.
MENU
- 104 -
You can combine the relayed scene (l 72) in the built-in memory and the continued scene in
the SD card to be one into the SD card.
A Built-in memory
B SD card
C Range of Relay Recording
Press the recording/playback button to switch this unit to the Playback Mode, and touch
the play mode select icon. Then, select the AVCHD scene. (l 27)
1 Insert the SD card that was used for Relay Recording.
2 Select the menu.
3 When the confirmation message appears, touch [YES].
Scene in the built-in memory will be deleted. (Protected scenes in the built-in memory are not
deleted.)
4 Touch [EXIT] when the relay scene combining complete message is
displayed.
The thumbnail view of the SD card is indicated.
Relay Recording information will be deleted when the relay scenes are combined, and Relay
Recording will be possible again.
When the relayed scenes in the built-in memory or SD card are deleted, combining of the relayed
scenes will not be possible.
Advanced (Playback)
Relay scene combining [HC-V550M]
Relay-recorded scene Relay scene combining
: [EDIT SCENE] # [RELAY SCENE COMBINE]
MENU
- 105 -
To cancel relay information
When the relay information is cancelled, combining of the relayed scenes will not be possible
anymore.
: [EDIT SCENE] # [RELAY INFO CANCEL]
Combining of the relay scene cannot be performed if the available space on the SD card is less
than the volume of the relayed scene in the built-in memory. It is recommended to combine the
relay scene using the HD Writer LE 2.1.
MENU
- 106 -
Use the HDMI mini cable (supplied).
HDMI is the interface for digital devices. If you connect this unit to a HDMI compatible high-
definition TV and then play back the recorded high-definition images, you can enjoy them in high
resolution with high quality sound.
1 Connect this unit to a TV.
Check that the plugs are inserted as far as they go.
Always use the supplied HDMI mini cable or a genuine Panasonic HDMI mini cable
(RP-CDHM15, RP-CDHM30: optional).
Advanced (Playback)
Watching Video/Pictures on your TV
Confirm the terminals on your TV and use a cable compatible with the terminals. Image
quality may vary with the connected terminals.
A High quality
1 HDMI terminal
2 Video terminal
A HDMI mini cable (supplied)
Be sure to connect to the
HDMI terminal.
Connecting with a HDMI mini
cable (l 109)
Playback using VIERA Link
(l 110)
B AV cable (commercially-
available)
Picture quality
1 High-definition images
when connecting to HDMI
terminal
2 Standard images when
connecting to video
terminal
A/V
- 107 -
2 Select the video input on the TV.
Example:
Select the [HDMI] channel with a HDMI mini cable.
Select the [Video 2] channel with an AV cable.
(The name of the channel may differ depending on the connected TV.)
Check the input setting (input switch) and the audio input setting on the TV. (For more
information, please read the operating instructions for the TV.)
3 Change the mode to to play back.
When this unit is connected to a TV, no image will be displayed on the TV in the following cases.
Use LCD monitor of this unit.
j Recording motion pictures
j When setting PRE-REC
j When saving the Highlight Playback scene or a manually edited scene
j When copying
*1
*1
When copying between the SD card and the built-in memory, this restriction applies only if you
convert the recording format
If you connect this unit to the TV when this unit is set to Recording Mode, a squealing sound
*2
may be output. Before connecting this unit, set it to Playback Mode.
*2 The microphone may pick up the sound from the speakers, producing an abnormal sound.
When connected to the TV, sound in Playback Mode is not output from this unit. Also, since the
volume cannot be adjusted with this unit, adjust the volume of the TV.
Some screens, such as the menu screen, may be displayed in reduced sizes on the TV.
//
Image and audio is not output from this unit while using the Wi-Fi function.
HC-V550M
HC-V550
HC-V550M
HC-V250
- 108 -
To watch images on a regular
TV (4:3) or when both sides of
the images do not appear on
the screen
Change the menu setting to display the images
correctly. (Check the TV setting.)
Example of images with a [16:9] aspect ratio
on a regular TV (4:3)
If a wide-screen TV is connected, adjust the
aspect setting on the TV. (Refer to the
operating instructions of the TV for details.)
To display the on-screen
information on the TV
When the menu setting is changed, the
information displayed on the screen (operation
icon etc.) can be displayed/not displayed on the
TV.
* This setting is only available in Motion Picture
Recording Mode or Still Picture Recording
Mode.
: [SETUP] # [TV ASPECT] # [4:3]
[TV ASPECT] setting
[16:9] [4:3]
MENU
: [SETUP] # [EXT. DISPLAY] #
desired setting
[SIMPLE]*: Information partially
displayed
[DETAIL]: Detailed information
displayed
[OFF]: Not displayed
MENU
Refer to the following support site for information about Panasonic TVs with an SD card
slot for playing back your pictures.
http://panasonic.net/
It may not be possible to play back scenes on the TV depending on the [REC MODE].
For details on how to play back, please read the operating instructions for the TV.
- 109 -
Connecting with a HDMI mini cable
Select the desired method of HDMI output.
[AUTO] determines the output resolution automatically based on information from the connected
TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method [1080p],
[1080i] or [576p] which enables the images to be displayed on your TV. (Please read the
operating instructions for the TV.)
Images may not be displayed on the television for several seconds in some cases, such as when
changing between scenes.
: [SETUP] # [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[576p]
MENU
- 110 -
¬ Press the recording/playback button to switch this unit to the Playback Mode.
1 Select the menu.
If you are not using VIERA Link, set to [OFF].
2 Connect this unit to a Panasonic TV compatible with VIERA Link with a HDMI
mini cable. (l 106)
It is recommended to connect this unit to an HDMI terminal other than the HDMI1 if there are 2 or
more HDMI input terminals on the TV.
VIERA Link must be activated on the connected TV. (Read the operating instructions of the TV for
how to set etc.)
Advanced (Playback)
Playback using VIERA Link
What is the VIERA Link (HDAVI Control™)?
This function allows you to use your remote control for the Panasonic TV for easy operations
when this unit has been connected to a VIERA Link compatible device using a HDMI mini
cable (supplied) for automatic linked operations. (Not all operations are possible.)
VIERA Link is a unique Panasonic function built on a HDMI control function using the standard
HDMI CEC (Consumer Electronics Control) specification. Linked operations with HDMI CEC
compatible devices made by other companies are not guaranteed.
When using devices made by other companies that are compatible with VIERA Link, refer to
the operating instructions for the respective devices.
This unit supports “VIERA Link Ver.5” function. “VIERA Link Ver.5” is the standard for
Panasonic’s VIERA Link compatible equipment. This standard is compatible with Panasonic’s
conventional VIERA Link equipment.
: [SETUP] # [VIERA Link] # [ON]
MENU
- 111 -
3 Operate with the remote control for the TV.
You can select the scene or picture you want to play back by pressing the button up, down, left or
right, and then the button in the centre.
The following operations are available by pressing the colour buttons on the remote control.
Other linked operations
Turning the unit off:
If you use the remote control for the TV to turn off the power, this unit also turns off.
Automatic input switching:
If you connect with a HDMI mini cable and then turn on this unit, the input channel on the TV
automatically switches to this unit’s screen. If the TV’s power is in standby status, it will turn on
automatically (if [Set] has been selected for the TV’s [Power on link] setting).
Depending on the HDMI terminal on the TV, the input channel may not switch automatically. In
this case, use the remote control for the TV to switch the input channel.
If you are unsure whether or not the TV and AV amplifier you are using are compatible with
VIERA Link, read the operating instructions for the devices.
Available linked operations between this unit and a Panasonic TV is different depending on the
types of Panasonic TVs even if they are compatible with VIERA Link. Refer to the operating
instructions of the TV for the operations that support on the TV.
Operation is not possible with a cable that is not based on the HDMI standard.
(When selecting scenes) (When playing back)
A Display/Cancel operation icons
Green Switching the number of scenes/still pictures in thumbnail display
(9 thumbnails > 20 thumbnails > 9 thumbnails...)
Zoom in on still picture
Yell ow Deleting scenes/still pictures
Red Zoom out from still picture
- 112 -
Motion pictures or still pictures recorded with this unit can be copied between an SD card inserted in
this unit and a built-in memory.
Check the used space of the copy destination
It is possible to check the used space of the SD card or built-in memory by [MEDIA STATUS].
(l 39)
By displaying in 1 scene or touching and holding the thumbnail in the 20 scenes or 9 scenes
display, recording date and time can be checked when playing back motion pictures, and
recording date and file number when playing back still pictures.
Depending on the media condition, some remaining capacity of the SD card or built-in memory
may not be used.
If the remaining capacity on a single SD card is not enough, you can copy to multiple SD cards
following the instruction on the screen. In this case, the last scene copied to an SD card is
automatically divided to fit the space on the SD card.
If you divide the scenes (l 100), and copy by scene selection, it is possible to copy matching the
remaining capacity of the media, or only the necessary parts.
If there is little or no remaining capacity in the SD card, a confirmation message asking to copy
after deleting all data on the SD card is displayed. Be aware that deleted data cannot be restored.
Refer to page 113 for approximate time for copying.
1 Press the recording/playback button to switch this unit to the Playback
Mode.
Use a sufficiently charged battery or the AC adaptor.
2 Select the menu.
Copy/Dubbing
Copying between SD card and Built-in
Memory
[HC-V550M]
Copying
: [COPY]
[]: When copying from the SD card to the built-in memory
[]
*
: When copying from the SD card to the USB HDD
[]: When copying from the built-in memory to the SD card
[]
*
: When copying from the built-in memory to the USB HDD
* Displayed only when connecting a USB HDD. (l 115)
MENU
- 113 -
When [ ] is selected, the recording format will be converted.
If there is no need to convert the recording format, touch [NO]. If there is need to convert the
recording format, touch [YES] and select the copying method.
When there are relay-recorded scenes in the built-in memory, a message appears on the screen.
Touch [YES] and copy after combining relay-recorded scenes to the SD card. (l 104)
3 Touch desired items following the screen display.
It will return to the previous step by touching .
(When [SELECT SCENES] is selected)
When touched, the scene/still picture is selected and the indication appears on the
thumbnail. Touch the scene/still picture again to cancel the operation.
(When [SELECT DATE] is selected)
When touched, the date is selected and surrounded by red. Touch the date again to cancel the
operation.
Up to 99 scenes/still pictures or 99 dates can be set in succession.
If 2 or more SD cards are necessary to copy, change the card following the instructions on the
screen.
4 Touch [EXIT] when the copy complete message is displayed.
The thumbnail view of the copy destination is indicated.
When you stop copying halfway
Touch [CANCEL] while copying.
[]:This will convert the scene recorded in AVCHD on the built-in memory to
MP4 (1280k720/25p or 640k360/25p) and copy to the SD card.
[]:This will convert the scene recorded in MP4 on built-in memory
*
to an
MP4 (1280k720/25p or 640k360/25p) scene, and copy it to SD card.
[]:This will convert the scene recorded in 1080/50p on the built-in memory
to 1080/50i and copy to the SD card.
* iFrame scenes or scenes saved in MP4 (Low Quality) are not converted and copied.
Approximate time for copying
When copying a recorded motion picture of full 4 GB size:
Approx. 5 minutes to 15 minutes
When performing [ ] on a recorded 1080/50p motion picture of full 4 GB
size:
Approx. 30 minutes to 40 minutes
When performing [ ] on a recorded AVCHD (HA) motion picture of full 4 GB
size:
Approx. 45 minutes to 60 minutes
When performing [ ] on a recorded MP4 (1080) motion picture of full 4 GB
size:
Approx. 30 minutes to 40 minutes
To copy approx. 600 MB still pictures (Picture size ):
Approx. 5 minutes to 15 minutes
10M
- 114 -
Depending on the following conditions, the time it takes for copying may be longer.
j The number of recorded scenes is large.
j The temperature of the unit is high.
If some motion pictures or still pictures have already been recorded to the copy destination, then
the same date may be assigned or images may not display by date when the list by date is
selected.
When converting and copying the scenes recorded in AVCHD to an MP4 scene, the scene
exceeding approximately 20 minutes is automatically divided.
Motion pictures that have been recorded on another device may not be copied. Data recorded on
a PC with HD Writer LE 2.1, etc. cannot be copied.
The settings for the copied motion pictures and still pictures will be cleared if the protected motion
pictures or still pictures are copied.
The order in which the scenes or still pictures were copied cannot be changed.
If you will delete the motion pictures or still pictures after copying is complete, be sure to
play back the motion pictures or still pictures to check that they have been copied to
correctly before deleting.
- 115 -
In these Operating Instructions, “USB hard disk drive” is indicated as “USB HDD”.
If you connect a USB HDD (commercially-available) to this unit by using a USB Connection Cable
(commercially-available), you can copy motion pictures and still pictures recorded on this unit to a
USB HDD.
It can also play back the scenes and still pictures copied to the USB HDD.
You can copy scenes and still pictures recorded with this unit while maintaining the image quality.
Please read the operating instructions of the USB HDD for how to use it.
Preparing for copying/playing back
In the following cases, a USB HDD cannot be used by connecting it to this unit:
j A USB HDD with a capacity of below 160 GB or above 2 TB
j When a USB HDD has two or more partitions
j If a USB HDD is in a format other than FAT32
j When connected by using a USB hub
A USB Connection Cable (commercially-available)
B USB HDD (commercially-available)
C Turn the side with the symbol up to connect the micro A end of the USB Connection Cable to
the USB terminal of this unit.
Connect this unit to the AC adaptor
1 (When using a desktop HDD)
Connect the AC adaptor (supplied with USB HDD) to the USB HDD.
If you are using a bus-powered or portable USB HDD, this unit can supply power to the USB HDD
by USB Connection Cable (commercially-available).
Copy/Dubbing
Copying/playing back with a USB HDD
Refer to the following support site for information about USB HDD.
http://panasonic.jp/support/global/cs/e_cam
(This Site is English only)
When the USB HDD that requires formatting is connected, a message is displayed. Follow the
instructions on the screen to format it.
Once the USB HDD has been formatted, all data stored on it will be deleted. The data cannot be
recovered.
- 116 -
2
Connect the AC adaptor and a sufficiently charged battery to this unit, and
press the recording/playback button to switch this unit to the Playback Mode.
If the AC adaptor is not connected to this unit, the USB HDD cannot be used.
3 Connect this unit to the USB HDD with the USB Connection Cable
(commercially-available).
Use a USB Connection Cable (commercially-available) compatible with the USB terminals of this
unit and the USB HDD. Connect the micro A end of the USB Connection Cable to the USB terminal
of this unit.
For information on the USB terminal of the USB HDD, refer to the operating instructions of the USB
HDD.
It may take several minutes until the connection is completed.
4 Touch the desired item.
Following can be performed by connecting the USB HDD with the scenes and still pictures copied
from this unit to other devices.
j Playback on Panasonic TV with a USB terminal
j Dub onto the Panasonic Blu-ray disc recorder with a USB terminal
j Save on a PC or rewrite on USB HDD using HD Writer LE 2.1
When using an Eye-Fi card (commercially-available), set [Eye-Fi TRANSFER] to [OFF]. (l 124)
When the item is set to [ON], even if you connect the USB HDD to this unit, it will not recognise
the USB HDD.
Points to check before copying
When using a USB HDD for the first time, or using a USB HDD that has been used with
other devices, first run [FORMAT MEDIA].
Before copying, go to [MEDIA STATUS] to check the amount of free space on the USB HDD.
In the following cases, copying may take longer:
j There are lots of scenes
j The temperature of this unit is high
If you copy protected scenes or still pictures, the protection setting of the copied scenes or still
pictures are cancelled.
The order in which the scenes were copied cannot be changed.
[Simple copy]: Copies all scenes and still pictures recorded with this unit that have
not been copied yet. (l 117)
[Copy selected files]: Allows you to select desired scenes/still pictures, and then copy.
(l 118)
[Playback HDD]: Plays back scenes and still pictures stored in a USB HDD on this
unit. (l 119)
[Safe Removal]: Allows you to safely remove this unit and a USB HDD.
When the USB HDD is connected to other devices such as Blu-ray disc recorder, a message
prompting to format the USB HDD may display. All the scenes and still pictures recorded on the
USB HDD will be erased if formatted. Do not format as important data will get erased and it will
be impossible to restore.
Before you delete the data on the media after copying is complete, be sure to play back
the USB HDD to check that they have been copied to correctly. (l 119)
- 117 -
Formatting
This is for initialising the USB HDD.
Please be aware that if a media is formatted then all the data recorded on the media is
erased and cannot be recovered. Back up important data on a PC etc.
Connect this unit to the USB HDD and touch [Playback HDD]
When formatting is complete, touch [EXIT] to exit the message screen.
Connect this unit and the USB HDD to format.
You may no longer be able to use the USB HDD if you format them on another device such as a
PC etc.
Displaying media information
The used space of the USB HDD can be checked.
Connect this unit to the USB HDD and touch [Playback HDD]
///
If you touch [CHANGE MEDIA], you can switch the display between the SD card and USB HDD.
If you touch [CHANGE MEDIA], you can switch the display between the SD card, built-in memory,
and USB HDD.
Simple copy
1 Connect this unit to the USB HDD to prepare for copying. (l 115)
2 Touch [Simple copy].
When [Copy selected files] or [Playback HDD] is selected, terminate the connection with the USB
HDD (l 119), and then perform the operation of Step 1.
3
Touch the media you want to copy.
4 Touch [YES].
5 Touch [EXIT] when the copy complete message is displayed.
The thumbnail view of the copy destination is indicated.
When you stop copying halfway:
Touch [CANCEL] while copying.
: [SETUP] # [FORMAT MEDIA] # [HDD]
: [SETUP] # [MEDIA STATUS]
MENU
MENU
HC-V550 HC-V530 HC-V250
HC-V230
HC-V550M
HC-V550M
- 118 -
Copy selected files
1 Connect this unit to the USB HDD to prepare for copying. (l 115)
2 Touch [Copy selected files].
You can also copy scenes or still pictures by touching , selecting [COPY].
3 ///
Touch [NEXT].
Touch the media you want to copy.
Please refer to page 112 for information on copying files between the SD card/built-in memory.
4 Touch the desired items following the instructions on the screen.
It will return to the previous step by touching .
(When [SELECT SCENES] is selected)
When touched, the scene/still picture is selected and the indication appears on the
thumbnail. Touch the scene/still picture again to cancel the operation.
(When [SELECT DATE] is selected)
When touched, the date is selected and surrounded by red. Touch the date again to cancel the
operation.
Up to 99 scenes/ 99 dates can be selected continuously.
5 Touch [EXIT] when the copy complete message is displayed.
The thumbnail view of the copy destination is indicated.
When you stop copying halfway:
Touch [CANCEL] while copying.
[]:When copying from the SD card to the USB HDD.
[]:When copying from the built-in memory to the USB HDD.
MENU
HC-V550 HC-V530 HC-V250
HC-V230
HC-V550M
- 119 -
Playing back the USB HDD
Only motion picture/still picture that have been copied by connecting this unit to the USB
HDD or copied with HD Writer LE 2.1 can be played back.
A USB Connection Cable (commercially-available)
B USB HDD (commercially-available)
C Turn the side with the symbol up to connect the micro A end of the USB Connection Cable to
the USB terminal of this unit.
1 Connect this unit to the USB HDD to prepare for playback. (l 115)
When playing back on a TV, connect this unit to the TV. (l 106)
2 Touch [Playback HDD].
3 Touch the scene or still picture to be played back and then play it back.
The playback operation is performed the same as when playing back motion pictures or still
pictures. (l 27, 79)
To terminate the connection between this unit and the USB HDD
Touch on the Touch Menu.
Disconnect the USB Connection Cable from this unit.
It is also possible to switch the media to play back by touching the play mode select icon.
When the USB HDD is connected, the (USB HDD) can be selected from the displayed media
types. (l 27)
///
The scenes you have saved in Highlight Playback during playback of the USB HDD are saved in
the SD card.
The scenes you have saved in Highlight Playback during playback of the USB HDD are saved in
the built-in memory. If you touch [COPY] after saving, you can copy them to the SD card.
Deleting scenes and still pictures on the USB HDD may take time.
You cannot set the following items during playback of (USB HDD).
j [SCENE PROTECT]
j [SECTION DELETE]
j [DIVIDE]
j [MANUAL EDIT]
j [SPLIT&DELETE]
j [CONVERT TO MP4]
j [RELAY SCENE COMBINE]
j [RELAY INFO CANCEL]
HC-V550 HC-V530 HC-V250
HC-V230
HC-V550M
HC-V550M
- 120 -
Check before dubbing
Check the equipment used for dubbing.
* Some equipment may not be compatible with high-definition (AVCHD) picture quality. In such a
case, connect with the AV cable (commercially-available) and dub with standard picture quality.
(l 123)
For the positions of the SD card slot, USB terminal, or terminal for connecting the AV cable, refer
to the operating instructions of the equipment used.
The MP4/iFrame scenes cannot be dubbed by inserting SD cards or by connecting with the USB
cable. To dub MP4/iFrame scenes, refer to page 123.
Copy/Dubbing
Dubbing with a Blu-ray disc recorder,
video device, etc.
Equipment used
for dubbing
Dubbing picture quality To dub
Equipment with
SD card slot
High-definition picture
quality*
Insert the SD card directly
(l 121)
Equipment with USB
terminal
High-definition picture
quality*
Connect with supplied
USB cable (l 121)
Equipment without
SD card slot or USB
terminal
Standard picture quality
This can be played back on
equipment incompatible with
high-definition (AVCHD), so it
is convenient if you are
dubbing for distribution.
Connect with AV cable
(commercially-available)
(l 123)
You can dub using a Panasonic Blu-ray disc recorder or high-definition (AVCHD)
compatible DVD recorder.
Depending on the recorders or the media to be copied to, you may not be able to copy
in high-definition (AVCHD) picture quality. For further details, see the operating
instructions of your recorder.
The scenes recorded in 1080/50p recording mode can only be dubbed to a Blu-ray disc
using the AVCHD Progressive compatible devices. The scenes recorded in 1080/50p
recording mode are not displayed when connected to the product that is not
compatible with AVCHD Progressive.
Note that the equipment described may not be available in certain countries and
regions.
- 121 -
To dub using equipment with an SD card slot
You can dub by directly inserting an SD card.
To copy scenes or still pictures from the built-in memory to an
SD card, see page 112.
To dub using equipment with a USB terminal
You can dub by connecting a USB cable.
Use the AC adaptor to free you from worrying about the battery running down.
Turn on the unit.
A USB cable (supplied)
B Turn the side with the symbol up to connect the micro B end of the USB Cable to the USB
terminal of this unit.
Insert the plugs as far as they will go.
1 Connect the unit to the Blu-ray disc recorder or high-definition (AVCHD)
compatible DVD recorder.
The USB function selection screen will appear on the screen of the unit.
2 Touch [RECORDER] on the screen of this unit.
When you select an option other than [RECORDER], reconnect the USB cable.
///
When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turn
the LCD monitor on.
3
Touch the media you wish to dub.
When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turn
the LCD monitor on.
4 Dubbing through operations on the Blu-ray disc recorder or high-definition
(AVCHD) compatible DVD recorder.
Do not touch [CHANGE MEDIA] on the screen of the unit during dubbing.
Dubbing in high-definition picture quality
HC-V550M
HC-V550 HC-V530 HC-V250
HC-V230
HC-V550M
HC-V550M
- 122 -
Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any
other USB cables.)
When this unit is connected to a Panasonic Blu-ray disc recorder or a DVD recorder using a USB
cable while the unit is turned on, power is also supplied from the connected equipment to this
unit.
For details on dubbing and playback methods, read the operating instructions of the Blu-ray disc
recorder or DVD recorder.
When you connect the unit to a Blu-ray disc recorder, a dubbing operations screen may appear
on the television connected to the Blu-ray disc recorder. In this case as well, perform the
operations of Steps 1 to 4.
You cannot switch the Recording Mode/Playback Mode by pressing the recording/playback
button on this unit while the Blu-ray disc recorder or DVD recorder is connected. Disconnect the
USB cable before performing either of these operations.
If the battery runs down during dubbing, a message will appear. Operate the Blu-ray disc recorder
to cancel the dubbing.
If you convert the recording format of the scenes recorded in 1080/50p to 1080/50i, you can dub
them to devices that do not support AVCHD Progressive. (l 11 2)
About the screen indication of the unit
When the unit is accessing the SD card, card access icon ( ) appears on the unit screen
or the access lamp is on.
When the unit is accessing the built-in memory, built-in memory access icon ( ) appears
on the unit screen or the access lamp is on.
Be careful not to disconnect the USB cable, AC adaptor or battery while the unit is accessing
the media, as this may result in the loss of recorded content.
HC-V550M
HC-V550M
- 123 -
Dubbing using equipment without an SD card slot or a USB terminal,
or using a video device
You can dub by connecting an AV cable (commercially-available).
Use the AC adaptor to free you from worrying about the battery running down.
Press the recording/playback button to switch this unit to the Playback Mode.
1 Connect this unit to a video device and start playback on this unit.
2 Start recording on the connected device.
To stop recording (dubbing), stop playback on this unit after stopping recording on the recorder.
Some screens, such as the menu screen, may be displayed in reduced sizes on the TV.
If the date and time display and function indication are not wanted, cancel them before dubbing.
(l 33, 108)
Dubbing in standard picture quality
Change the video input on the
video device and TV that this
unit is connected to.
The channel set will differ depending on
the terminal to which the unit is
connected.
See the operating instructions of the
video device for details.
Insert the plugs as far as they will go.
A AV cable (commercially-available)
If the dubbed images are played back on a wide-screen TV, the images may be stretched
vertically.
In this case, refer to the operating instruction for the device you are connecting to or read the
operating instructions of the wide-screen TV and set the aspect ratio to 16:9.
A/V
- 124 -
Using an Eye-Fi card (commercially-available), you can record motion pictures and still pictures on
the card, and save them on a PC or upload them on a file-sharing website via a wireless network.
Insert an Eye-Fi card (commercially available) to the unit.
(When using in the Motion Picture Recording Mode or Still Picture Recording Mode)
Set the card to be used as the recording media. (l 22)
(When using in the Playback Mode)
Select the play mode select icon from the thumbnail screen, and set the media to
(card). (l 27)
Select the menu.
When [Eye-Fi TRANSFER] is set to [ON], the transferrable files will be transferred automatically.
To cancel the transferring of a file, turn off the unit or set [Eye-Fi TRANSFER] to [OFF].
The setting at the time of purchase is [OFF]. Every time the Eye-Fi card is removed from the unit,
this setting is set to [OFF].
Eye-Fi transfers are not available during motion picture recording.
You can check the file transfer status on the thumbnail screen.
Copy/Dubbing
Using the Eye-Fi
card
The functions of the Eye-Fi card (including wireless transmission) are not guaranteed to work
on this product. In the case of a malfunction of the card, please contact the card manufacturer.
To use the Eye-Fi transfer feature, a broadband wireless LAN environment is required.
To use the Eye-Fi card, permission from the national or regional government is required. Do
not use if you have not obtained permission. If you are unsure as to whether use is permitted,
please check with the card manufacturer.
To prevent the interception of communications, misuses, identity thefts, etc., we strongly
recommend you configure the appropriate security settings (encryption settings). For details,
refer to the manuals of your Eye-Fi card and access point.
Install the software supplied with the Eye-Fi card in advance on your PC, and configure
the Eye-Fi settings. (For settings methods etc., please read the card operating
instructions or consult the card manufacturer)
: [SETUP] # [Eye-Fi TRANSFER] # [ON]
File has been transferred
File waiting for transfer
File cannot be transferred
HC-V550M
MENU
- 125 -
Using Eye-Fi direct mode
The files can be transferred directly from the Eye-Fi card to a smartphone without going through the
wireless access point when necessary setting is performed in a PC in advance.
Install the software supplied with the Eye-Fi card on your PC, and configure the Eye-
Fi direct mode settings.
Insert an Eye-Fi card (commercially available) to the unit.
Select the menu.
This mode is displayed only when [Eye-Fi TRANSFER] is set to [ON].
The mode will be cancelled using the following steps.
j When the unit is turned off
j If you start recording motion picture
In addition to the steps above, the mode may also be cancelled by the Eye-Fi card.
When connected via Eye-Fi direct mode, [ECONOMY (BATT)]/[ECONOMY (AC)] are disabled.
Selecting files to transfer
If you perform the required settings in advance on your PC, you can transfer selected files alone.
For settings methods etc., please read the card operating instructions or consult the card
manufacturer.
Install the software supplied with the Eye-Fi card on your PC, and configure the selection
transfer settings.
Insert an Eye-Fi card (commercially available) to the unit.
///
Press the recording/playback button to switch to the Playback Mode, and touch the play
mode select icon. Then, select [MP4/iFrame] or [PICTURE]. (l 27)
Press the recording/playback button to switch to the Playback Mode, and touch the play
mode select icon
.
Then, set the media to (card) and select [MP4/iFrame] or
[PICTURE]. (l 27)
Select the menu.
The setting method is the same as that for the scene protect settings. (l 102)
If the selected transfer setting is not configured on the computer, [SCENE PROTECT] is
displayed and the selected transfer setting cannot be configured.
When the write protect switch on the Eye-Fi card is on the LOCK side, [SCENE PROTECT] is
displayed and selected transfer setting is disabled. Please unlock the write protect switch.
The protect setting is also applied to the files for which [TRANSFER/PROTECT] is set. To delete
a file, first cancel [TRANSFER/PROTECT] and then perform the operation.
AVCHD scenes cannot be used as the selected transfer setting.
: [SETUP] # [Eye-Fi DIRECT]
: [VIDEO SETUP] or [PHOTO SETUP] # [TRANSFER/PROTECT]
MENU
HC-V550 HC-V530 HC-V250
HC-V230
HC-V550M
MENU
- 126 -
The Eye-Fi menu only appears when an Eye-Fi card is used.
The Eye-Fi transfer feature cannot be guaranteed to continue to operate in the future due to
changes to the card specification etc.
Update the firmware of the Eye-Fi card to the latest one using the software supplied with the Eye-
Fi card before use.
When the endless memory function of the Eye-Fi card is set to on, the files transferred from the
card may be deleted automatically.
The Eye-Fi card may heat up as a result of the files being transferred. Note that the use of an
Eye-Fi card accelerates the battery drain, so we recommend you use the card in Playback Mode.
The Eye-Fi setting can be checked while pausing the recording.
If the Eye-Fi card is removed and then reinserted into the unit, set functions related to Eye-Fi
again from the menu.
When using the Eye-Fi card, please be sure to unlock the write-protect switch. (l 14)
Before deleting the files, please confirm they have been transferred to your PC and uploaded to
the sharing site.
Do not use the Eye-Fi card in locations where the use of wireless devices is forbidden, such as
inside aircraft etc.
Depending on network conditions, the transfer may take some time. Also, if network conditions
deteriorate, the transfer may be suspended.
Files over 2 GB in size cannot be transferred. Such files should first be split to reduce the file size.
(l 100)
[Eye-Fi TRANSFER] is set to [ON]
(Transferring in Eye-Fi direct mode)
[Eye-Fi TRANSFER] is set to [ON]
[Eye-Fi TRANSFER] is set to [OFF]
- 127 -
Use this unit as a wireless LAN device
When using equipment or computer systems that require more reliable security than wireless LAN
devices, ensure that the appropriate measures are taken for safety designs and defects for the
systems used. Panasonic will not take any responsibility for any damage that arises when using this
unit for any purpose other than as a wireless LAN device.
Use of the Wi-Fi function of this unit is presumed to be in countries
where this unit is sold
There is the risk that this unit violates the radiowave regulations if used in countries other than those
where this unit is sold, and Panasonic takes no responsibility for any violations.
There is the risk that data sent and received via radio waves may be
intercepted
Please note that there is the risk that data sent and received via radio waves may be intercepted by
a third party.
Do not use this unit in areas with magnetic fields, static electricity or
interference
Do not use this unit in areas with magnetic fields, static electricity or interference, such as near
microwave ovens. Radio waves may not reach this unit.
Using this unit near devices such as cordless telephones or any other wireless LAN device that
use the 2.4 GHz radio wave band may cause a decrease in performance in both devices.
Do not connect to the wireless network you are not authorised to
use
When this unit utilises its Wi-Fi function, wireless networks will be searched automatically. When
this happens, wireless networks that you are not authorised to use (SSID
*
) may be displayed,
however do not attempt to connect to the network as it may be considered as unauthorised access.
* SSID refers to the name of device that is used to identify a network over a wireless LAN
connection. If the SSID matches for both devices, transmission is possible.
Before use
To use a Wi-Fi function with this unit, you need a wireless access point or destination device
equipped with a wireless LAN function.
For the operations and settings of your device such as the smartphone, please read the
operating instructions of the device.
This unit is NFC-compatible
Using the NFC (Near Field Communication) function, you can easily transfer data necessary for a
Wi-Fi connection between this unit and the smartphone.
This function can be used with the NFC compatible device with Android (OS version 2.3.3 or
later). (Except for some models)
This unit is WPS-compatible
WPS (Wi-Fi Protected Setup™) is a function that allows you to easily set up a connection with a
wireless LAN device and make security-related settings.
Wi-Fi [HC-V550]/[HC-V550M]/[HC-V250]
Wi-Fi
®
function
- 128 -
This unit cannot be used to connect to a public wireless LAN connection.
Use a IEEE802.11b, IEEE802.11g or IEEE802.11n compatible device when using a wireless
access point.
When using a wireless access point, we strongly recommend that you set a encryption to
maintain information security.
When sending
scenes
or still pictures, we recommend you use the AC adaptor. If you are using
the battery, we recommend you use the fully charged one.
When sending motion pictures or still pictures on a mobile network or tethering, high packet
communication fees may be incurred depending on the details of your contract.
This unit may not connect to a wireless access point depending on the radio wave condition.
When sending motion pictures or still pictures with the Wi-Fi function, do not cover the Wi-Fi
transmitter with your hand. (l 9)
When the battery indicator is flashing red, the connection with other equipment may not start or
the connection may be disrupted.
The Wi-Fi transmitter may become warm when using the Wi-Fi function; however this is not a sign
of a malfunction. (l 9)
- 129 -
Using a smartphone, you can perform record/playback operations from a remote location or upload
motion pictures and still pictures recorded in this unit on SNS (Social Networking Service).
A When connecting directly to a smartphone
B When connecting to a wireless access point
Refer to [Help] in the “Image App” menu about how to operate.
Preparations before using [Remote Ctrl]
1 Install the smartphone application “Image App” on your smartphone. (l 156)
2 Check if the smartphone is an Android (NFC-compatible), Android (non-NFC-
compatible), or iOS device.
If your smartphone is NFC-compatible, a message asking you to touch the NFC mark on the
device will be displayed when starting up the “Image App”.
Using NFC, you can easily set up a direct connection between this unit and the smartphone.
If the device is Android (NFC-compatible)
Use NFC to set up a direct connection between this unit and the smartphone.
Proceed to “Using [Remote Ctrl] with a direct connection”. (l 131)
Wi-Fi [HC-V550]/[HC-V550M]/[HC-V250]
[Remote Ctrl]
You need to turn on the Wi-Fi function of your smartphone.
Do not remove the SD card during remote operations.
Caution:
Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject when you use
this function. Use at your own risk.
Setting up a direct Wi-Fi connection between this unit and a
smartphone
- 130 -
If the device is Android (non-NFC-compatible) or iOS
Operate this unit and the smartphone to set up a direct connection.
[Easy Connection (WPS)] (l 163)
Connecting with QR code (l 163)
Connecting by entering an SSID and Password (l 164)
When the Wi-Fi connection is complete, proceed to “Using [Remote Ctrl] with a direct connection”.
(l 131)
1 Check if the wireless access point is compatible with IEEE802.11b/g/n.
2 Set up a Wi-Fi connection between this unit and the wireless access point.
[Easy Connection (WPS)] (l 159)
Searching for wireless access points to set up a connection (l 160)
Setting up a connection manually (l 161)
When the Wi-Fi connection is complete, proceed to “Using [Remote Ctrl] with a wireless access
point connection”. (l 132)
Using [Wi-Fi Easy Setup], you can also set up a Wi-Fi connection in conjunction with the
smartphone application “Image App”. (l 158)
Setting up a Wi-Fi connection via a wireless access point
- 131 -
Using [Remote Ctrl] with a direct connection
If the device is Android (NFC-compatible)
Set the NFC function of the smartphone to ON.
1 Start up the smartphone application “Image App”.
2 Touch the smartphone on of this unit.
If this is the first time the smartphone is connecting to this unit,
touch [YES] on the screen of this unit, and then touch the
smartphone on of this unit again.
If the unit is not recognised even when touching the smartphone,
change positions and try again.
When the connection is complete, images of this unit is
displayed on the smartphone screen.
This unit is turned on even if it touches the smartphone on of
this unit, where this unit is turned off with a LCD monitor.
If you touch the second smartphone when this unit has already been connected
to the first one
The remote operation with the first smartphone that has been connected to this unit will be cut off,
and the newly touched smartphone will be connected.
The connection cannot be established while this unit is recording or copying a file to the
smartphone during remote operations.
If the device is Android (non-NFC-compatible) or iOS
Proceed to Step 2 when your Wi-Fi connection has been made via [Direct Connection] in [Wi-Fi
Setup] (l 163).
1 Press Wi-Fi button and touch [Remote Ctrl].
It will go into connection standby for remote operation.
2 Start up the smartphone application “Image App”.
When the connection is complete, images of this unit is displayed on the smartphone screen.
To exit [Remote Ctrl]:
Touch [EXIT] or press Wi-Fi button.
The
message is displayed. Touch [YES] to close the indication.
After turning off this unit with the LCD monitor, you can also turn on this unit and start the NFC
communication by touching the smartphone on of this unit. (If you have turned off this unit
with the power button, this unit will not turn on by touching the smartphone on of this unit)
You can register up to five smartphones. When the number exceeds five, registrations will be
deleted, starting from the oldest touched one.
Please refer the instructions for the device you are using for information on how to set up and use
a NFC-compatible smartphone.
- 132 -
Using [Remote Ctrl] with a wireless access point
connection
If the device is Android (NFC-compatible)
Set the NFC function of the smartphone to ON.
1 Connect the smartphone to a wireless access point.
When you connect using NFC for the first time, please make connection of this unit and a
wireless access point. (l 159)
2 Start up the smartphone application “Image App”.
3 Touch the smartphone on of this unit.
If the unit is not recognised even when touching the smartphone,
change positions and try again.
If the smartphone is connecting to this unit for the first time, a
message is displayed again. Touch [YES].
When the connection is complete, images of this unit is
displayed on the smartphone screen.
This unit is turned on even if it touches the smartphone on of
this unit, where this unit is turned off with a LCD monitor.
If you touch the second smartphone when this unit has already been connected
to the first one
The remote operation with the first smartphone that has been connected to this unit will be cut off,
and the newly touched smartphone will be connected.
The connection cannot be established while this unit is recording or copying a file to the
smartphone during remote operations.
If the device is Android (non-NFC-compatible) or iOS
1 Connect the smartphone to a wireless access point.
2 Press Wi-Fi button and touch [Remote Ctrl].
It will go into connection standby for remote operation.
3 Start up the smartphone application “Image App”.
When the connection is complete, images of this unit is displayed on the smartphone screen.
To exit [Remote Ctrl]:
Touch [EXIT] or press Wi-Fi button.
The message is displayed. Touch [YES] to close the indication.
After turning off this unit with the LCD monitor, you can also turn on this unit and start the NFC
communication by touching the smartphone on of this unit. (If you have turned off this unit
with the power button, this unit will not turn on by touching the smartphone on of this unit)
You can register up to five smartphones. When the number exceeds five, registrations will be
deleted, starting from the oldest touched one.
Please refer the instructions for the device you are using for information on how to set up and use
a NFC-compatible smartphone.
- 133 -
About [Remote Ctrl]
Smartphone screen shots are example displayed in Motion Picture Recording Mode and Playback
Mode.
Depending on your OS or the version of the smartphone application “Image App”, the screens
may differ from the ones above.
Screen display during remote operations
Recording screen
1 Remaining battery power of this unit
2 Zoom
3 Photoshot button
4 Menu display
5 Playback mode button
6 Recording mode button
7 Recording start/stop button
8 Motion Picture Recording Mode/Still
Picture Recording Mode toggle button
9 Name of the connected device
Playback screen
1 Camera function button
2 Number of scenes
3 Remaining battery power of this unit
4 Menu display
5 Playback mode button
6 Recording mode button
7 Name of the connected device
8 Scene information display
XXXXXXXXX
XXXXXXXXX
1/16
AVCHD_0001 2013/12/15 15:30:50
- 134 -
In Recording Mode
Recording motion pictures/still pictures
Selecting a mode
Selecting a media to record
Using the zoom (Available in the medium or fast speed)
Switching between the Recording Mode:
j Intelligent Auto Mode
j Manual Mode
j //
Stop Motion Animation Assist Mode
Recording format
Picture size
White Balance
Backlight Compensation
Night Mode
Self-timer
Turning the unit off
In Playback Mode
Playback
Selecting a media to playback (SD card/Built-in memory)
Switching between thumbnails (AVCHD/MP4/Still picture)
Delete
Save (Copy)
j Scenes recorded in AVCHD cannot be copied.
j Scenes recorded in iFrame can only be copied with iOS devices.
j Depending on your smartphone, scenes recorded in MP4 format may not be copied.
Smart Home Network
j It is possible to post to SNS or perform playback operation when this unit is connected to the
DLNA-compatible TV via wireless access point using a smartphone.
Creating and saving scenes with Highlight Playback
(Highlight Playback cannot be used for MP4/iFrame scenes)
Highlight Photo Collage
j Parts that were recognised as clearly recorded are automatically extracted from multiple
scenes and saved as still pictures. (Not available for MP4/iFrame scenes.)
j In addition, the multiple still pictures you have captured can be put in a frame and saved as a
single still picture.
Creative Control Mode will not be available.
If you record an image when the LCD monitor of this unit is closed with the screen facing outward,
the LCD monitor turns off.
Functions available for remote operations
HC-V550M
HC-V550
HC-V530
HC-V550M
- 135 -
You can use your smartphone to check on your baby being monitored by this unit when you are in
another room. The smartphone and this unit can be used like radio transceivers, allowing the users
to have a conversation by taking turns. This unit can also send a notification to the smartphone
whenever the baby cries.
Preparations before using [Baby Monitor]
1 Check if the wireless access point is compatible with IEEE802.11b/g/n.
2 Install the smartphone application “Image App” on your smartphone. (l 156)
3 Set up a Wi-Fi connection between this unit and the wireless access point.
[Easy Connection (WPS)] (l 159)
Searching for wireless access points to set up a connection (l 160)
Setting up a connection manually (l 161)
When the Wi-Fi connection is complete, proceed to “Using [Baby Monitor]”.
Using [Wi-Fi Easy Setup], you can also set up a Wi-Fi connection in conjunction with the
smartphone application “Image App”. (l 158)
Wi-Fi [HC-V550]/[HC-V550M]/[HC-V250]
[Baby Monitor]
You need to turn on the Wi-Fi function of your smartphone.
If [CLOCK SET] (l 20) is not set correctly, the sound detection function will not work
(l 136).
Notifications cannot be sent to more than one smartphone.
Check your contract details carefully, as smartphone and internet contract details may
result in high communication charges being incurred, or a limit placed on
communication traffic.
Caution:
It is the responsibility of parents or guardians to check on their child. Use [Baby Monitor]
only as an aid.
Place this unit so that it will be out of the reach of the baby.
XXXXXXXXX
- 136 -
Using [Baby Monitor]
1 Press Wi-Fi button and touch [Baby Monitor].
The SSID of the wireless access point to which this unit is connected is displayed.
2 Connect the smartphone to a wireless access point.
To connect it, select the SSID of the wireless access point displayed on the screen of this unit.
3 Start up the smartphone application “Image App”.
When this unit is connected to the Internet via the wireless access point, the notification function,
which sends notifications from this unit to the smartphone, becomes available.
When the connection is complete, the screen of this unit turns off. To turn on the screen again,
touch the screen.
To exit [Baby Monitor]:
Touch [EXIT] displayed on the screen of this unit or press the Wi-Fi button.
Checking on the baby in your house
You can check the image of the baby being monitored on your smartphone.
Images of baby-monitoring cannot be recorded.
It cannot be confirmed with multiple smartphones simultaneously.
Voice message function
The smartphone and this unit can be used like radio transceivers, allowing the users to have a
conversation by taking turns.
A voice message of up to 1 minute can be sent.
Open the LCD monitor of this unit when using the Voice message function.
Sending notifications to your smartphone
In the following cases, this unit sends a notification to the smartphone:
When baby monitoring starts
“Notification Baby Monitor activated.”
When a sound is detected
“Notification The video camera has detected sound.”
Sound detection
When this unit detects a sound, it can automatically send a notification to the connected
smartphone.
This function can be used only if this unit is connected to the Internet via the wireless access
point when [Baby Monitor] is used.
Depending on the sound detection sensitivity setting and recording conditions, sounds may not
be detected. Test the sound detection function in advance to check if sounds can be detected and
notified.
What you can do with [Baby Monitor]
- 137 -
Touch [Setup] on the screen of this unit, and select the item you want to set.
[Notification Setup]
This sets whether to send a notification to the smartphone when a sound is detected.
[Notification Test]
This tests if a notification can be sent to the smartphone when a sound is detected.
[Remote Voice Level]
This sets the voice message volume.
[Sound Detection Sensitivity]
This sets the sound detection sensitivity.
Changing [Baby Monitor] settings
[ON]/[OFF]
(Volume high)/ (Volume low)
[High]/[Low]
- 138 -
You can confirm the recording screen of this unit from outside using a smartphone.
Preparations before using [Hom.Monitor]
1 Check if the wireless access point is compatible with IEEE802.11b/g/n.
2 Install the smartphone application “Image App” on your smartphone. (l 156)
3 Check if the smartphone is an Android (NFC-compatible), Android (non-NFC-
compatible), or iOS device.
If your smartphone is NFC-compatible, a message asking you to touch the NFC mark on the
device will be displayed when starting up the “Image App”.
4 Set up a Wi-Fi connection between this unit and the wireless access point.
[Easy Connection (WPS)] (l 159)
Searching for wireless access points to set up a connection (l 160)
Setting up a connection manually (l 161)
When the Wi-Fi connection is complete, proceed to “Using [Hom.Monitor]”.
Using [Wi-Fi Easy Setup], you can also set up a Wi-Fi connection in conjunction with the
smartphone application “Image App”. (l 158)
Wi-Fi [HC-V550]/[HC-V550M]/[HC-V250]
[Hom.Monitor]
Switch the Wi-Fi setting to off on your smartphone and use with mobile network such
as 3G.
If [CLOCK SET] (l 20) is not set correctly, [Hom.Monitor] cannot be used.
Check your contract details carefully, as smartphone and internet contract details may
result in high communication charges being incurred, or a limit placed on
communication traffic.
Caution:
This function is not designed for anti-theft or disaster use.
XXXXXXXXX
- 139 -
Using [Hom.Monitor]
Perform the home monitoring operation on the smartphone. (l 142)
When the firewall is turned on, the Wi-Fi function may not work correctly. If this occurs, check the
network settings.
If the device is Android (NFC-compatible)
Set the NFC function of the smartphone to ON.
1 Turn off the Wi-Fi setting of the smartphone.
2 Start up the smartphone application “Image App”.
When a Wi-Fi connection guidance screen is displayed, select [NO].
3 Enable the home monitoring setting from the menu of the smartphone
application “Image App”.
Select [ (MENU)] # [Application function] # [Home Monitor], and enable [Use Home
Monitor].
4 Select [Set connect. dest.] of the smartphone.
5 Touch the smartphone on of this unit.
If this is the first time the smartphone is connecting to this unit,
touch [YES] on the screen of this unit, and then touch the
smartphone on of this unit again.
If the unit is not recognised even when touching the smartphone,
change positions and try again.
Check that the message “Connecting...” has disappeared from
this unit.
6 When [Start “Home Cam”?] is displayed on the smartphone, select [YES],
and start home monitoring.
Connecting with Android (non-NFC-compatible) or iOS device
1 Press Wi-Fi button and touch [Hom.Monitor].
2 Turn off the Wi-Fi setting of the smartphone.
3 Start up the smartphone application “Image App”.
(If the device is Android)
When a Wi-Fi connection guidance screen is displayed, select [No].
(If the device is iOS)
If a confirmation message for the Wi-Fi setup is displayed, select [Close].
4 Enable the home monitoring setting from the menu of the smartphone
application “Image App”.
Select [ (MENU)] # [Application function] # [Home Monitor], and enable [Use Home
Monitor].
5 Select [Set connect. dest.] of the smartphone.
When using the home monitor function for the first time
- 140 -
6 Enter the Device ID and Password displayed on the screen of this unit into
the smartphone.
When the entry is complete, select [OK] (on your Android device) or [Complete] (on your iOS
device).
If you want to check the Device ID and Password after performing Step 7, on the screen of this
unit, touch [Setup] # [Home Monitor Connect].
7 Touch [ENTER] on the screen of this unit.
Check that the message “Connecting...” has disappeared from this unit.
8 On the smartphone, select [Start Home Monitor] to start home monitoring.
When configuring the home monitor settings using QR code
1 Press Wi-Fi button and touch [Hom.Monitor].
2 Touch [QR code].
QR code is displayed on the screen of this unit.
3 Turn off the Wi-Fi setting of the smartphone.
4 Start up the smartphone application “Image App”.
(If the device is Android)
When a Wi-Fi connection guidance screen is displayed, select [No].
(If the device is iOS)
If a confirmation message for the Wi-Fi setup is displayed, select [Close].
5 Enable the home monitoring setting from the menu of the smartphone
application “Image App”.
Select [ (MENU)]
#
[Application function]
#
[Home Monitor], and enable [Use Home Monitor].
6 Select [Set connect. dest.] of the smartphone.
7 On the smartphone, select [QR code] to scan the QR code displayed on the
screen of this unit.
The Device ID and Password will be set. Select [OK] (on your Android device) or [Complete] (on
your iOS device).
8 Touch [NEXT] on the screen of this unit.
Check that the message “Connecting...” has disappeared from this unit.
9 On the smartphone, select [Start Home Monitor] to start home monitoring.
To exit [Hom.Monitor]:
Touch [EXIT] displayed on the screen of this unit or press the Wi-Fi button.
If the device is Android (NFC-compatible)
Set the NFC function of the smartphone to ON.
1 Start up the smartphone application “Image App”.
When a Wi-Fi connection guidance screen is displayed, select [NO].
2 Display the screen of a connection setup to home monitor from the menu of a
smartphone.
When using the home monitor function for the second time or later
- 141 -
3 Touch the smartphone on of this unit.
If the unit is not recognised even when touching the smartphone,
change positions and try again.
A confirmation screen is displayed on the screen of a
smartphone. Touch [YES] to start home monitor.
This unit is turned on even if it touches the smartphone on of
this unit, where this unit is turned off with a LCD monitor.
If the device is Android (non-NFC-compatible) or iOS
1 Press Wi-Fi button and touch [Hom.Monitor].
2 Start up the smartphone application “Image App”.
When a Wi-Fi connection guidance screen is displayed, select [NO].
Use the smartphone to start home monitor.
To exit [Hom.Monitor]:
Touch [EXIT] displayed on the screen of this unit or press the Wi-Fi button.
After turning off this unit with the LCD monitor, you can also turn on this unit and start the NFC
communication by touching the smartphone on of this unit. (If you have turned off this unit
with the power button, this unit will not turn on by touching the smartphone on of this unit)
You can register up to five smartphones. When the number exceeds five, registrations will be
deleted, starting from the oldest touched one.
Please refer the instructions for the device you are using for information on how to set up and use
a NFC-compatible smartphone.
An image or sound may be interrupted or a connection may be disconnected depending on the line
state. Set [LINE QUALITY] with this unit or the smartphone application “Image App” by using the
following values of the recommended optimal speed (upstream) as a guide.
Recommended optimal speed (upstream) for the broadband line, mobile
router (tethering), etc. connected to this unit
For information on the optimal speed, contact your service provider, etc.
Operation cannot be guaranteed for all devices.
Line quality
Recommended optimal speed
(upstream)
500 kbps or higher
If you have difficulty establishing a connection with [Hom.Monitor] or the connection is
disconnected, wait for a while, and connect again. If the connection still cannot be established,
check the settings from the menu of the smartphone application “Image App” below.
[ (MENU)] # [Application function] # [Home Monitor] # [Advanced Settings]
Refer to [Help] in the “Image App” menu about the settings.
- 142 -
Even with a broadband line, the recommended optimal speed may not be reached depending on
your environment.
Narrowband lines such as analogue modems cannot be used.
If the line for the smartphone is switched, communication may be interrupted. In that case,
connect again.
Refer to [Help] in the “Image App” menu about how to operate.
What you can operate/set with a smartphone during home monitoring
What you can operate with a smartphone
Confirm the condition inside the house
The monitoring video can be confirmed.
The monitoring image can be recorded as a video or a still picture.
It cannot be confirmed with multiple smartphones simultaneously.
Depending upon the environment in which the device is used, motion picture may be like a
frame rate is low.
Voice message
The smartphone and this unit can be used like radio transceivers, allowing the users to have a
conversation by taking turns.
You can talk up to 10 seconds in 20 second interval.
Open the LCD monitor of this unit when using the Voice message function.
What you can set with a smartphone
Moving/non-moving object detection
This unit can detect moving objects and non-moving objects in the home monitoring detection area.
Once this unit is set to home monitoring (home monitoring standby state), it cannot detect
moving objects for up to 5 minutes.
Detection of some moving and stationary subjects may not be possible due to the condition of
the subject. Check beforehand to see if detection of the moving or stationary object can be
detected.
If the movement of the subject is too fast or too slow, if the subject is too small, or if the
surroundings are too dark, detection of moving and stationary objects may be impossible.
Automatic recording
You can record a motion picture on this unit as it detects a moving or non-moving object.
Automatic recording will record for approximately 30 seconds.
Automatic recording can record a maximum of 1 hour 15 minutes per day. Check the remaining
available recording time.
When automatic recording is performed with moving object detection, automatic recording is
performed only once within the set time.
When automatic recording is performed with non-moving object detection, the set time will be
reset and non-moving object detection will start again.
- 143 -
Setting cannot be performed while operating monitoring with a smartphone.
Touch [Setup] and select desired setting.
[Home Monitor Connect]
You can display the registration screen for a Device ID and Password.
If [QR code] is touched, a QR code will be displayed on the screen of this unit.
[Remote Voice Level]
You can set the initial remote voice level and speaker volume level of the remote voice function.
The mode cannot be switched to another one during home monitoring operations.
Although home monitoring can be performed with the battery, we recommend you use the AC
adaptor.
It is recommended to use this unit fixed so that it will not move since it may cause false detection.
Power of this unit will automatically turn off when monitoring condition continues for
approximately 10 days.
[REC MODE] is set to [HE].
[ZOOM MODE] is set to [i.Zoom OFF].
Creative Control Mode will not be available.
If you record an image when the LCD monitor of this unit is closed with the screen facing outward,
the LCD monitor turns off.
The password for the home monitor settings will change when [Reset Wi-Fi Settings] is
performed. Set the home monitor settings of the smartphone again and reconnect to this unit
when [Reset Wi-Fi Settings] is performed.
Changing the home monitor settings of this unit
(Volume high)/ (Volume low)
- 144 -
Connecting this unit to a DLNA-compatible TV via Wi-Fi, you can play back scenes and still pictures
on the TV.
A DLNA-compatible TV
Preparations before using [DLNA Play]
1 Check if the wireless access point is compatible with IEEE802.11b/g/n.
2 Check if the TV is DLNA-compatible.
3 Set up a Wi-Fi connection between this unit and the wireless access point.
[Easy Connection (WPS)] (l 159)
Searching for wireless access points to set up a connection (l 160)
Setting up a connection manually (l 161)
When the Wi-Fi connection is complete, proceed to “Playing back on a TV”.
Using [Wi-Fi Easy Setup], you can also set up a Wi-Fi connection in conjunction with the
smartphone application “Image App”. (l 158)
Playing back on a TV
You can play back the scenes and still pictures recorded with or stored in this unit on a TV.
The following scenes can be played back:
j Scenes recorded in AVCHD [HG]/[HE]
j Scenes recorded in MP4/iFrame [720]
j Scenes saved in MP4 (High Quality) or MP4 (Low Quality)
1 Press Wi-Fi button and touch [DLNA Play].
If you touch [Change AP], you can switch the wireless access point to another one that has been
registered to this unit.
If you touch [CANCEL], the Wi-Fi connection is cancelled.
When the connection is complete, the screen of this unit turns off. To display it again, touch the
screen.
Wi-Fi [HC-V550]/[HC-V550M]/[HC-V250]
[DLNA Play]
Please read the operating instructions for the TV about connecting TV to the wireless
access point.
Do not remove the SD card in playing back on a TV.
- 145 -
2 Select this unit (SSID) by the TV side.
Select the media ([SD/MEM]) and select the motion picture ([AVCHD/MP4]) or still picture
([JPEG]) to play back.
3 Perform playback operations with the TV remote control.
Playback operations may differ depending on the TV in use.
The following operations can be performed if a colour button
is pushed.
Blue/Red: Skip playback
Fast forward/Fast rewind playback cannot be performed.
You cannot perform playback operations with this unit.
To exit [DLNA Play]:
Touch [EXIT] or press Wi-Fi button.
A message is displayed. Touch [YES] to exit.
Scenes recorded in the following [REC FORMAT] or [REC MODE] can not be played back:
j AVCHD: [1080/50p]/[PH]/[HA]
j MP4/iFrame: [1080]/[iFrame]
The scenes may not be played back smoothly depending on your environment, such as the
network condition.
(Examples of operations during
motion picture playback)
A Skip playback
B Stop
C Playback/Pause
- 146 -
By setting up a Wi-Fi communication between this unit and a PC, you can copy scenes and still
pictures recorded with this unit to the PC.
A PC
Preparations before using [Copy]
1 Check if the wireless access point is compatible with IEEE802.11b/g/n.
2 Check if the PC and the wireless access point are connected via Wi-Fi.
You can also use a LAN cable to connect the PC and the wireless access point.
3 Set up a Wi-Fi connection between this unit and the wireless access point.
[Easy Connection (WPS)] (l 159)
Searching for wireless access points to set up a connection (l 160)
Setting up a connection manually (l 161)
When the Wi-Fi connection is complete, proceed to “Copying to a PC”. (l 148)
Using [Wi-Fi Easy Setup], you can also set up a Wi-Fi connection in conjunction with the
smartphone application “Image App”. (l 158)
Wi-Fi [HC-V550]/[HC-V550M]/[HC-V250]
[Copy]
For information on the connection between a PC and a wireless access point, refer to
the operating instruction of the device in use.
If this unit and a PC are not connected to the same wireless access point, copying is
not possible.
- 147 -
To copy scenes and still pictures by setting up a Wi-Fi connection between this unit and the PC,
complete the following preparations:
j Turn on the PC
j Create a shared folder (destination folder)
*1
*1 The name of the folder must consist of 15 or less alphanumeric characters.
When using HD Writer LE 2.1
1 Install HD Writer LE 2.1.
For information on the operating environment and installation, refer to “Operating environment”
(l 178) and “Installation” (l 181).
2 Using HD Writer LE 2.1, create a destination folder.
Select [Auto-create] or [Create manually]. The first option creates a destination folder
automatically, while the second option allows you to specify a destination folder or create a new
one. With the second option, you can also set password protection for a destination folder.
For details, refer to the Operating Instructions of HD Writer LE 2.1 (PDF file). (l 186)
When not using HD Writer LE 2.1
If the workgroup setting of the connected PC has been changed from the standard one, you also
need to change the [PC Connect Setup] setting of this unit. (l 171)
The user account of the PC (both the Account Name and the Password) must consist of 32 or
less alphanumeric characters.
*2
If you use non-alphanumeric characters for the user account, a destination folder may not be set.
*2 If you use more than 32 characters for the user account, copying via a Wi-Fi connection is not
possible.
(For Windows)
Supported OS: Windows XP/Windows Vista/Windows 7/Windows 8/Windows 8.1
Example: Windows 7
1 Select a destination folder, and right-click.
2 Select [Properties], and enable sharing of the folder.
For details on how to enable sharing, refer to the operating instructions of your PC or the help of
your OS.
(For Mac)
Supported OS: OS X v10.4 to v10.9
Example: OS X v10.9
1 Select a destination folder, and click the following items:
[File] # [Get Info]
2 Enable sharing of the folder.
For details on how to enable sharing, refer to the operating instructions of your PC or the help of
your OS.
Creating a shared folder (destination folder) on the PC
- 148 -
Copying to a PC
Create a shared folder (destination folder) on the PC. (l 147)
1 Press Wi-Fi button and touch [Copy].
2 Touch the PC to be connected.
To search for PCs again, touch [Refresh].
(When the PC you want to connect to is not displayed)
Touch [Set Manually].
3 (When [Set Manually] is touched)
Enter the computer name of the PC (NetBIOS name for Mac computers).
Enter the computer name of your PC (NetBIOS name for Mac computers).
(A maximum of 15 characters can be entered.)
When the computer name (or NetBIOS name) contains a space (blank character), etc., it may not
be recognised correctly. If a connection attempt fails, we recommend that you change the
computer name (or NetBIOS name) to the one consisting of only alphanumeric characters, with a
maximum of 15 characters.
Input method is same operation as for setting up the title. (l 88)
After entering the computer name of the PC, touch [Enter].
4 Touch [INPUT], and enter the name of the shared folder.
If you have created a shared folder (destination folder) using HD Writer LE 2.1 (l 147), touch
[NEXT].
Enter the name of the shared folder that you have created on your PC and then touch [Enter].
(A maximum of 15 characters can be entered.)
If a screen asking you to enter a user account and password is displayed after you have entered
the name of the shared folder, enter the one you have created on your PC.
/
When the connection to the PC is complete, copying starts.
When copying is complete, this unit turns off automatically.
5
Select the copy source media ([Built-inMemory]/[SD CARD]).
When the connection to the PC is complete, copying starts.
When copying is complete, this unit turns off automatically.
When you stop copying halfway
Touch [CANCEL] while copying.
HC-V550 HC-V250
HC-V550M
- 149 -
Copying can be performed even when the battery is used for power, but we recommend that the
AC adaptor be used.
Once scenes or still pictures are copied to a PC, the original scenes or still pictures cannot be
copied to any PCs.
However, if the original scenes or still pictures are copied between the SD card and the built-in
memory, the duplicate scenes or still pictures in the SD card or the built-in memory can be copied
to PCs.
If the total length of the scenes recorded on the same date on the SD card or the built-in memory
exceeds approximately 8 hours, the scenes will not be copied.
If the copy source contains scenes or still pictures recorded on other devices, copying may be
cancelled.
Depending on your environment, copying may take time or may not be available.
If the scene to be copied is long or copying fails, we recommend that the following be performed
for copying.
j Connecting this unit to the PC by USB cable (l 182, 187)
j Inserting the SD card to the built-in SD card slot of the PC or your SD card reader/writer directly
If you intend to delete the original scenes or still pictures when the copying has finished,
always play back the duplicate scenes or still pictures on PC before deletion to confirm that
they have been copied normally.
HC-V550M
- 150 -
You can broadcast motion pictures of this unit live by setting up a link between the “LUMIX CLUB
and USTREAM.
A You can also broadcast motion pictures live by connecting this unit and a smartphone that
supports tethering.
Wi-Fi [HC-V550]/[HC-V550M]/[HC-V250]
[Live Cast]
If [CLOCK SET] (l 20) is not set correctly, [Live Cast] cannot be used.
Check your contract details carefully, as smartphone and internet contract details may
result in high communication charges being incurred, or a limit placed on
communication traffic.
Caution:
Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject when you use
this function. Use at your own risk.
- 151 -
Preparations before using [Live Cast]
1 (When connecting to a wireless access point)
Check if the wireless access point is compatible with IEEE802.11b/g/n.
(For tethering connection)
Check if your smartphone is compatible with the tethering function.
For information on how to set up the tethering function, refer to the operating instructions for
your smartphone.
2 Acquire a USTREAM ID/Password/Programme.
Acquire a USTREAM ID/Password/Programme using a smartphone or a PC.
Operation cannot be guaranteed on future USTREAM services and updates. The service content
and screens which can be used are subject to change without prior notice. (This service is current
as of November 2013)
3 Acquire a “LUMIX CLUB” Login ID/Password.
When you connect this unit to a wireless access point (l 159), you can acquire a “LUMIX CLUB”
Login ID/Password with this unit. (l 171)
4 Use linked services with “LUMIX CLUB”
Log in to the “LUMIX CLUB” and register/set up the USTREAM on WEB service link setup.
5 Set up a Wi-Fi connection between this unit and the wireless access point.
[Easy Connection (WPS)] (l 159)
Searching for wireless access points to set up a connection (l 160)
Setting up a connection manually (l 161)
When the Wi-Fi connection is complete, proceed to “Broadcasting live”.
Using [Wi-Fi Easy Setup], you can also set up a Wi-Fi connection in conjunction with the
smartphone application “Image App”. (l 158)
About the USTREAM
With this video-sharing website, you can stream and watch motion pictures this unit is recording.
Refer to the USTREAM site for details.
http://www.ustream.tv/
To use the Live Cast, access following website.
http://lumixclub.panasonic.net/eng/c/
- 152 -
Broadcasting live
Press Wi-Fi button and touch [Live Cast].
If a “LUMIX CLUB” Login ID and Password has not been registered to this unit yet, enter them
according to the screen.
If you touch [Change AP], you can switch the wireless access point to another one that has been
registered to this unit.
When the connection is made correctly, the screen of this unit switches to the Live Cast Mode.
To send e-mails
You can send e-mails containing such information as the USTREAM channel name or the
scheduled broadcast date.
This unit can only set the scheduled broadcast date. (l 154) For other settings, set them on the
“LUMIX CLUB”.
On the “LUMIX CLUB”, register the destination addresses of the e-mail in advance.
Touch .
/ / will disappear when no touch function is
performed for a specific period of time. To display them again,
touch the screen.
To start the live broadcast
Touch .
/ / will disappear when no touch function is
performed for a specific period of time. To display them again,
touch the screen.
To stop the live broadcast
Touch .
When (grey) is displayed, unsent data is present. Wait until the unsent data is sent and is
displayed.
To exit the Live Cast Mode:
Touch [EXIT] or press Wi-Fi button.
A message is displayed. Touch [YES] to exit.
A [EXIT]
A [EXIT]
- 153 -
About the screen indications in the Live Cast Mode
In Live Cast Mode, even if you press the recording start/stop button, recording is not possible.
In Live Cast Mode, this unit is set to Intelligent Auto Mode.
If you start a live broadcast when the LCD monitor is closed with the screen facing outward, the
LCD monitor of this unit will turn off.
If this unit is on the e-mail sender block list of destination devices or if their firewall setting is
enabled, the Wi-Fi function may not work correctly when you send an e-mail. If this occurs, check
the network settings.
When the live broadcast cannot be watched on a USTREAM application for TVs or smartphones,
cancel the Password for the Programme, and restart the broadcast.
Image content may be leaked to third parties depending on the USTREAM image publication
method settings. Set the publication range and Password using USTREAM if required.
Touch to display the live broadcast setting
screen.
/ / will disappear when no touch function is
performed for a specific period of time. To display them again,
touch the screen.
/ Live broadcast indication
Line quality (l 154)
1h23m Elapsed time of the live broadcast
12fps Frame rate (l 154)
Number of people watching the live
broadcast
Up to 9999 viewers can be
indicated. The indication does not
appear when the number is 0.
E-mail delivery setting
Live broadcast microphone setting
(l 155)
The indication appears when
[Microphone On Air] is set to
[OFF].
Configuring the live broadcast settings
A [EXIT]
- 154 -
To configure the e-mail delivery settings
You can make the delivery setting of a broadcast notification e-mail and the setting for the
scheduled time and date of the broadcast indicated in the e-mail.
1 Touch [E-MAIL SETUP].
2 Touch [ON] or [OFF].
3
(When [ON] is selected)
To set the scheduled broadcast date.
To set the line quality
1 Touch [LINE QUALITY].
2 Touch the desired line quality.
Depending on the line status of the broadband line, mobile router (tethering), etc. to which this
unit is connected, the image and sound may be interrupted or the connection may be lost. Set the
line quality on this unit by referring to the recommended optimal speeds (upstream) above.
For information on the optimal speed, contact your service provider, etc.
If the image being broadcast appears as if frames were dropped or stops when [AUTO] is set,
change [LINE QUALITY] according to your environment.
If the selected line quality has an image quality higher than the one you are using, images will
appear as if the frame rate is low.
Operation cannot be guaranteed for all devices.
Even with a broadband line, the recommended optimal speed may not be reached depending on
your environment.
Narrowband lines such as analogue modems cannot be used.
If the line for the smartphone is switched, communication may be interrupted. In that case,
connect again.
[ON]: Enables e-mailing.
[OFF]: Disables e-mailing.
[AUTO]: Allows you to set the date on which is touched.
[MANUAL]: Allows you to set the desired time and date.
The setting method is the same as [CLOCK SET]. (l 20)
Line
Quality
Picture size Frame rate
Screen
indications
Recommended optimal
speed (upstream)
[High] 1280k720
5 to 25 fps
3 Mbps or higher
[Medium] 640k360 1 Mbps or higher
[Low] 320k176 500 kbps or higher
[AUTO]
Use this option to check the line quality and automatically set the item.
- 155 -
To save in USTREAM
1 Touch [Save in USTREAM].
2 Touch [ON] or [OFF].
Broadcasting live with no sound
1 Touch [Microphone On Air].
2 Touch [OFF].
[ON]: Live motion pictures are saved on USTREAM.
[OFF]: Select this option not to save on USTREAM.
[ON]: Sound is output during live broadcasts.
[OFF]: Sound is not output during live broadcasts.
- 156 -
To use the following Wi-Fi functions, you need to install the smartphone application “Image App”.
j [Remote Ctrl] (l 129)
j [Baby Monitor] (l 135)
j [Hom.Monitor] (l 138)
Use the latest version.
The service may not be able to be used properly depending on the type of smartphone being
used. For information on the “Image App”, check the support website below.
http://panasonic.jp/support/global/cs/e_cam
(This Site is English only.)
When downloading the app on a mobile network, high packet communication fees may be
incurred depending on the details of your contract.
Wi-Fi [HC-V550]/[HC-V550M]/[HC-V250]
Install the “Image App”
About the “Image App”
The “Image App” is an application provided by Panasonic.
For Android apps For iOS apps
OS Android 2.3.3 or later iOS 5.0 or later
Installation
procedure
1 Connect your Android
device to a network.
2 Select “Google Play™
Store”.
3 Enter “Panasonic Image
App” into the search
box.
4 Select “Panasonic
Image App” and install
it.
The icon will be added
to the menu.
1 Connect your iOS
device to a network.
2 Select “App Store
SM
”.
3 Enter “Panasonic Image
App” into the search
box.
4 Select “Panasonic
Image App” and install
it.
The icon will be added
to the menu.
- 157 -
To use the Wi-Fi function, connect this unit to a wireless access point or smartphone via Wi-Fi.
Depending on the Wi-Fi connection method, available Wi-Fi functions differ.
If you select [History], you can set up a Wi-Fi connection that uses the connection settings of a
previously used Wi-Fi function. (l 165)
About the status indicator and the connection status icon when
connected to Wi-Fi
Wi-Fi [HC-V550]/[HC-V550M]/[HC-V250]
Setting Up a Wi-Fi Connection
When this unit is turned on, the Wi-Fi setting confirmation screen may be displayed. Touch
[YES], and set up Wi-Fi setting.
To set up the Wi-Fi setting of this unit using the smartphone application “Image App”, touch
[YES] again. (Refer to “Using the Network Easy Setup to set up a connection” on page 158.)
To set up Wi-Fi using this unit, touch [NO]. (Refer to “Connecting to a wireless access point”
on page 159.)
Wi-Fi connection
methods
Connecting to a wireless access
point (l 159)
Setting up a direct connection to a
smartphone (l 163)
Available Wi-Fi
functions
[Remote Ctrl] (l 132)
[Baby Monitor] (l 135)
[Hom.Monitor] (l 138)
[DLNA Play] (l 144)
[Copy] (l 146)
[Live Cast] (l 150)
[Remote Ctrl] (l 131)
A Lit green
The status indicator is lit green while this unit is
connected to a destination device after completing a
Wi-Fi connection.
When Wi-Fi is disconnected, the status indicator is lit
red again.
B The connection status icon
When connected to wireless access point:
connected to Wi-Fi/ not connected to Wi-Fi
The display will change as follows according to the
radio wave intensity: (Weak) # # #
(Strong).
When directly connected:
connected to Wi-Fi/ not connected to Wi-Fi
- 158 -
Using the Network Easy Setup to set up a connection
With the smartphone application “Image App”, you can transfer the following information between
the smartphone and this unit by using the NFC or QR code function.
* Acquire a Login ID and Password for the “LUMIX CLUB” on this unit in advance.
Install the smartphone application “Image App” on your smartphone. (l 156)
If the device is Android (NFC-compatible)
Set the NFC function of the smartphone to ON.
1 Press Wi-Fi button and touch [Wi-Fi Setup].
2 Touch [Wi-Fi Easy Setup].
Touch [YES].
3 Start up the smartphone application “Image App”.
4 Touch the smartphone on of this unit.
The setup screen is displayed on the smartphone.
5 Follow the on-screen instructions of the smartphone to set up a connection.
When the settings is complete, the smartphone and this unit are connected directly, allowing you
to use remote operations. (l 131)
Connecting with Android (non-NFC-compatible) or iOS device
1 Press Wi-Fi button and touch [Wi-Fi Setup].
2 Touch [Wi-Fi Easy Setup].
Touch [YES].
3 Touch [QR code].
4 Start up the smartphone application “Image App”.
5 On the smartphone, select [QR code] to scan the QR code displayed on the
screen of this unit.
The setup screen is displayed on the smartphone.
When using an iOS device, perform the following operations:
1 Select the option that allows you to install the app on the profile screen of the “Image App”, and
follow the on-screen instructions to complete the installation.
2 Press the home button to close the displayed screen.
3 Touch [NEXT] on the screen of this unit to display its SSID.
4 After selecting the network name (SSID) of this unit from the Wi-Fi setup of the smartphone,
start up “Image App”.
6 Follow the on-screen instructions of the smartphone to set up a connection.
When the settings is complete, the smartphone and this unit are connected directly, allowing you
to use remote operations. (l 131)
Set on the smartphone and
transfer to this unit
Clock information
Information on wireless access points (SSIDs and Passwords)
“LUMIX CLUB” Login ID, Password
*
Transfer from this unit to the
smartphone
Device ID for home monitoring
- 159 -
Connecting to a wireless access point
Check if the wireless access point you are using is compatible with WPS
j If the wireless access point is compatible with WPS:
Proceed to the following [Easy Connection (WPS)]
j If the wireless access point is not compatible with WPS:
[Searching for wireless access points to set up a connection] (l 160)
1 Press Wi-Fi button.
When the Wi-Fi button is pressed for the first time, a message is displayed. Touch [YES], and
proceed to step 5.
2 Touch [Wi-Fi Setup].
3 Touch [Set Wireless Access Point].
4 Touch the part with no display of a wireless
access point.
For information on how to delete wireless access points or
change the search order of wireless access points, please
refer to [Set Wireless Access Point] on page 168.
5 Touch [Easy Connection (WPS)].
6 Set the wireless access point to waiting for WPS.
For further details, please read the operating instructions for the
wireless access point. (When using a tethering connection, please
read the operating instructions for the smartphone.)
A message is displayed when the connection is complete.
A message is displayed when the connection attempt fails. Touch
[EXIT], and set the connection again.
Enter a PIN code to set the Wi-Fi connection
1 Touch [PIN code] in Step 6.
2 Touch the wireless access point to be connected.
If you touch [Refresh], you can search for wireless access points again.
3 Touch [ENTER].
4 Enter the PIN code displayed on this unit screen into the wireless access
point.
For further details, please read the operating instructions for the wireless access point. (When
using a tethering connection, please read the operating instructions for the smartphone.)
5 Touch [NEXT].
A message is displayed when the connection is complete.
A message is displayed when the connection attempt fails. Touch [EXIT], and set the connection
again.
[Easy Connection (WPS)]
A [Delete]
B [EXIT]
- 160 -
Confirm Encryption key (Password) of the selected wireless access point if the network
authentication is encrypted.
1 Press Wi-Fi button.
When the Wi-Fi button is pressed for the first time, a message is displayed. Touch [YES], and
proceed to step 5.
2 Touch [Wi-Fi Setup].
3 Touch [Set Wireless Access Point].
4 Touch the part with no display of a wireless
access point.
For information on how to delete wireless access points or
change the search order of wireless access points, please
refer to [Set Wireless Access Point] on page 168.
5 Touch [Search].
6 Touch the wireless access point to connect.
Touch [ENTER].
If you touch [Refresh], you can search for wireless access
points again.
When no wireless access points are displayed, refer to “Setting up a connection manually”.
(l 161)
If an Encryption key (Password) is not set, the connection is complete and a message is
displayed.
7 (When there is an Encryption key (Password))
Enter the Password.
For details on how to enter characters, refer to page 88.
When the entry is complete, touch [Enter].
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
j is displayed on the screen
Searching for wireless access points to set up a connection
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
j is displayed on the screen
A [Delete]
B [EXIT]
- 161 -
When connecting by [Set Manually], confirm the SSID (Identification name), Authentication
method, Encryption type, and Encryption key (Password) of the wireless access point you are
using.
1 Press Wi-Fi button.
When the Wi-Fi button is pressed for the first time, a message is displayed. Touch [YES], and
proceed to step 5.
2 Touch [Wi-Fi Setup].
3 Touch [Set Wireless Access Point].
4 Touch the part with no display of a wireless
access point.
For information on how to delete wireless access points or
change the search order of wireless access points, please
refer to [Set Wireless Access Point] on page 168.
5 Touch [Set Manually].
6 Touch [INPUT], then enter the SSID of the
wireless access point to be connected.
For details on how to enter characters, refer to page 88.
When the entry is complete, touch [Enter].
7 Touch the desired Network Authentication method.
When [WEP] is selected, proceed according to step 9.
8 Touch the desired Encryption method.
If you select [NONE], a message is displayed after completing the connection.
9 (When selecting [WEP]/[TKIP]/[AES])
Touch [INPUT], then enter the Password.
For details on how to enter characters, refer to page 88.
When the entry is complete, touch [Enter].
A message is displayed when the connection is complete.
Setting up a connection manually
Network authentication type Encryption types that can be set
[Open] [NONE]/[WEP]
[WEP] There is no setup of an encryption types.
[WPA-PSK]/[WPA2-PSK] [TKIP]/[AES]
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
j is displayed on the screen
A [Delete]
B [EXIT]
- 162 -
Check the wireless access points instruction manual and settings when a saving wireless access
point.
The Encryption methods are [AES], [TKIP] and [WEP] in descending order of strength. We
recommend you connect with the strongest possible Encryption method.
When the signal of the wireless access point is weak, a connection may not be established. Refer
to “Messages” (l 191) and “Troubleshooting” (l 193) for details.
Transmission speed may decrease, or may not be usable depending on the environment it is
used in.
- 163 -
Setting up a direct connection to a smartphone
Check if the smartphone you are using is compatible with WPS
j If the smartphone is compatible with WPS:
Proceed to the following [Easy Connection (WPS)]
j If the smartphone is not compatible with WPS:
Proceed to the following “Connecting with QR code”
1 Press Wi-Fi button and touch [Wi-Fi Setup].
2 Touch [Direct Connection].
3 Touch [Change connection type].
4 Touch [Easy Connection (WPS)].
5 Set the smartphone to WPS Mode.
1 Press Wi-Fi button and touch [Wi-Fi Setup].
2 Touch [Direct Connection].
3 Touch [Change connection type].
4 Touch [QR code].
QR code is displayed on the screen of this unit.
5 Start up the smartphone application “Image App”.
6 On the smartphone, select [QR code] to scan the QR code displayed on the
screen of this unit.
When using an Android device, the smartphone and this unit are connected directly, allowing you
to use remote operations. (l 131)
When using an iOS device, perform the following operations:
1 Select the option that allows you to install the app on the profile screen of the “Image App”, and
follow the on-screen instructions to complete the installation.
2 Press the home button to close the displayed screen.
3 Select the network name (SSID) of this unit from the Wi-Fi setup of the smartphone.
When the QR code cannot be scanned, refer to “Connecting by entering an SSID and Password”.
(l 164)
[Easy Connection (WPS)]
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
j is displayed on the screen
Connecting with QR code
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
j is displayed on the screen
- 164 -
1 Press Wi-Fi button and touch [Wi-Fi Setup].
2 Touch [Direct Connection].
3 On the smartphone, select the SSID displayed on this unit from the Wi-Fi
setup menu.
4 Enter the Password displayed on this unit’s screen on the smartphone.
Transmission speed may decrease, or may not be usable depending on the environment it is
used in.
Connecting by entering an SSID and Password
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
j is displayed on the screen
- 165 -
Connecting from the history
Each use of a Wi-Fi function is stored in the Wi-Fi connection history. Connecting from the history
allows you to easily set up a connection using the previous connection settings.
1 Press Wi-Fi button and touch [History].
2 Touch the desired item to be connected.
The history of Wi-Fi functions and connection destinations that have been used is displayed as a
list.
For periods when a smartphone, etc. and this unit were connected directly, only the list of Wi-Fi
functions is displayed.
To display the connection details, touch [DETAIL].
3 Touch [ENTER].
When the connection is complete, a message will be displayed and the screen will switch to the
Wi-Fi function screen selected in step 2. Perform the operation of the selected Wi-Fi function.
If you have selected [Remote Ctrl], start up the smartphone application “Image App” after
checking that “Under remote control” is displayed on the LCD monitor.
If the connection cannot be established, check the Wi-Fi setup of the smartphone.
The history can store up to 8 most-recently used Wi-Fi connections.
If you set up a Wi-Fi connection from [Set Wireless Access Point] in [Wi-Fi Setup], the Wi-Fi
connection will not be stored in the history.
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
j The following icons are displayed on the screen:
When connected to wireless access point:
When directly connected:
- 166 -
Please refer to the operating instruction of the device in use for details about the setting of the
wireless access point or smartphone.
If the Wi-Fi connection cannot be established
Problem Check points
It cannot connect to the
wireless access point.
The wireless access point
is not detected.
(General)
Turn ON the wireless access point.
Approach the wireless access point and reconnect.
If it takes time to complete the connection, the Wi-Fi
connection will be aborted.
Reset the connection settings.
Check how to connect to the wireless access point and how
to set the security settings.
Make sure the wireless access point is registered in this unit.
(l 168)
The device may be unable to locate the wireless access point
due to problems with the signal. Refer to “Setting up a
connection manually”. (l 161)
([Easy Connection (WPS)])
Make sure the wireless access point is in the correct WPS
standby mode.
Make sure the PIN code has been correctly input.
([Search] or [Set Manually])
Make sure the SSID and Password have been correctly input.
Check the Authentication method, Encryption type, and
Encryption key (Password).
Radio waves of the
wireless access point get
disconnected.
The condition may improved by moving the location or
changing the angle of the wireless access point.
If you use another 2.4 GHz band device such as a microwave
oven or cordless telephone nearby, you may interrupt the
signal. Keep a sufficient distance from these types of devices.
The Wi-Fi connection is
not possible between this
unit and a smartphone.
(Wireless Access Point Connection)
Make sure the smartphone is properly connected to the
wireless access point by checking the Wi-Fi settings of the
smartphone.
Make sure this unit and the smartphone are connected to the
same wireless access point.
Make sure the wireless access point is registered in this unit.
(l 168)
(Direct Connection)
Make sure the smartphone is properly connected to this unit
by checking the Wi-Fi settings of the smartphone.
Make sure the SSID and Password have been correctly input.
Make sure the smartphone is not connected to the wireless
access point. If it is connected to the wireless access point,
change the Wi-Fi access point using the smartphone’s Wi-Fi
set up.
- 167 -
It takes long time every
time to connect to a
smartphone.
It may take longer time to connect depending on the Wi-Fi
connection setting of the smartphone, but it is not a
malfunction.
This unit is not displayed
in the Wi-Fi setting screen
of the smartphone.
Try switching the ON/OFF of the Wi-Fi function in the Wi-Fi
settings of the smartphone.
The Wi-Fi connection is
disconnected immediately.
If there is a setting for avoiding poor connections in the Wi-Fi
setting menu of the Android device 4.0 or later version, turn it
OFF.
Cannot be connected
using NFC.
Make sure your smartphone is compatible with NFC. This unit
can be used with NFC-compatible terminals via Android (OS
version 2.3.3 or later).
Make sure the NFC function of your smartphone is ON.
Make sure this unit is not turned off with the power button.
Some smartphones cannot be easily checked simply by
touching. If this unit is not recognised even after touching,
change positions and try again by touching slowly.
Touch again if it does not connect after touch.
Problem Check points
- 168 -
Configure various settings necessary to use the Wi-Fi function.
When connected to Wi-Fi, the settings cannot be changed.
1 Press Wi-Fi button and touch [Wi-Fi Setup].
2 Touch desired menu item.
You can add or delete wireless access points, or rearrange the display order of wireless access
points.
Up to 3 wireless access points can be set.
Please refer to page 159 for details about [Set Wireless Access Point].
To add a wireless access point
1 Touch the part where no wireless access points
are displayed.
2 Configure the wireless access point settings.
(l 159)
To delete a wireless access point
1 Touch the wireless access point to be deleted.
2 Touch [Delete].
The message is displayed. Touch [YES] to delete.
To switch the search order
1 Touch the access point you want to switch the order.
2 Switch the order by touching or .
To change the wireless access point, delete one of the registered wireless access points, and
then add one.
Please refer to page 158.
Please refer to page 163.
Please refer to page 171.
Wi-Fi [HC-V550]/[HC-V550M]/[HC-V250]
How to Use the [Wi-Fi Setup] Menu
[Set Wireless Access
Point]
[Wi-Fi Easy Setup]
[Direct Connection]
[LUMIX CLUB]
A [Set Wireless Access Point]
B [Delete]
C [EXIT]
- 169 -
This item allows you to use NFC to turn on this unit, establish a remote connection, and configure
the home monitoring settings.
Please refer to page 143.
If you set [ON], the LCD monitor turns off when remotely operating this unit with a smartphone (in
Motion Picture Recording Mode or Still Picture Recording Mode) so that power consumption is
reduced.
When the LCD monitor is turned off, you can display the screen by touching it.
If the Wi-Fi connection is turned off, this unit will turn off automatically approximately 30 minutes
later.
This will set/clear the Password to limit the startup of the Wi-Fi setting menu.
By setting the Password, it will prevent erroneous operation, prevent wrongful use of the Wi-Fi
function by third party, and protect the set personal information.
1 Touch [Setup].
2 Touch [INPUT], and enter the Password (6 characters).
After finish entering the Password, touch [Enter].
If the Password has already been set, is displayed.
For details on how to enter characters, refer to page 88.
3 Touch [NEXT].
4 Touch [INPUT], and enter the same Password again.
After finish entering the Password, touch [Enter].
If the Passwords match with each other, a message is displayed.
5 Touch [EXIT].
If you set the Wi-Fi Password, you will need to enter the Password each time you touch [Wi-Fi
Setup] on the Wi-Fi home screen.
When you forget your Wi-Fi Password, perform [Reset Wi-Fi Settings] from the Setup menu. This
will set the Wi-Fi setting to the condition at the time of purchase, and you will be able to use the
Wi-Fi setting menu. (l 37)
You can change the Wi-Fi setting back to the default condition.
The “LUMIX CLUB” Login ID and Wi-Fi Password are also deleted.
[Start up using NFC]
[ON]/[OFF]
[Home Monitor Connect]
[ECONOMY (Wi-Fi)]
[ON]/[OFF]
[Wi-Fi Password]
[Setup]/[Delete]
[Reset Wi-Fi Settings]
- 170 -
You can view and change this unit’s Device name (SSID), which is used for operating this unit as a
wireless access point.
1 Touch [INPUT], and enter the desired Device name (SSID).
Input up to 20 characters are recommended. All the characters cannot be confirmed when
displaying the Device names on this unit if a long Device name is used. (l 163)
For details on how to enter characters, refer to page 88.
2 Touch [EXIT].
If you are going to connect directly to a smartphone after changing the Device name (SSID), set
the connection again with the changed Device name (SSID). (l 163)
The Password entered during the setting of direct connection cannot be changed. (l 163)
You can change or check your wireless LAN’s network settings, such as the [IP Address], [Subnet
Mask] and [MAC Address].
If you touch [AUTO], the network settings are configured automatically. If you touch [MANUAL],
you can set each item. Select the item you want to set, and set it.
[MAC Address] cannot be changed.
You can test the connection between this unit and the wireless access point. The following
connections can be verified:
j Connection to the wireless access point
j Connection to “LUMIX CLUB”
j Connection to USTREAM
j Connection to the home monitor server
1 Touch [NEXT].
The connection test starts.
2 Check the connection test result, and touch [EXIT].
If the connection is successful, “±” is displayed. If the connection is not successful, “t” is
displayed.
To test the connection to “LUMIX CLUB” or USTREAM, you need to make other settings in
advance. (l 151, 171)
[Device Name]
[Wireless LAN setup]
[IP Address]/[Subnet Mask]/[Gateway]/[Primary DNS]/[Secondary DNS]/[MAC Address]
[Connection Test]
- 171 -
You can change the workgroup setting.
When copying scenes or still pictures to a PC using a Wi-Fi function [Copy], you need to create a
shared folder on the PC and connect this unit to the workgroup to which the PC belongs. (The
default setting is WORKGROUP.)
For information on how to create a shared folder, refer to page 147.
For details on how to enter characters, refer to page 88.
A maximum of 15 characters can be entered.
Acquire a “LUMIX CLUB” Login ID (free).
You can upload the scenes and still pictures recorded with this unit to WEB service with [Remote
Ctrl] or use the [Live Cast] function if you register to “LUMIX CLUB”.
You can set the same “LUMIX CLUB” Login ID for this unit and a smartphone.
When Login ID is acquired over the smartphone (“Image App”) only, it is possible to register the
same Login ID to this unit using the “Image App”. (l 172)
When different Login IDs are acquired for this unit and the smartphone, change one of the Login
ID and Password to the one you like to keep.
1 Press Wi-Fi button and touch [Wi-Fi Setup].
2 Touch [LUMIX CLUB].
3 Touch [Add/Change Account].
4 Touch [New account].
Connect to the network. Proceed to the next page by touching [NEXT].
5 Read through the “LUMIX CLUB” terms then touch [Agree].
Touch [EXIT] to cancel the process without acquiring a Login ID.
6 Touch [NEXT] and enter a Password.
Enter any combination of 8 to 16 characters and numbers for the Password.
For details on how to enter characters, refer to page 88.
7 Check the Login ID and touch [OK].
The Login ID (12-digit number) will be displayed automatically. When logging in to the “LUMIX
CLUB” with a computer, you only need to enter the numbers.
Be sure to make a note of the Login ID and Password.
[PC Connect Setup]
[Change]/[Return to default]
[Change]: Enter the name of the workgroup to which the destination PC belongs.
[Return to default]: This will set to the condition at the time of purchase.
Using the “LUMIX CLUB”
Refer to the “LUMIX CLUB” site for details.
http://lumixclub.panasonic.net/eng/c/
- 172 -
Check or change the acquired Login ID/Password
To change the “LUMIX CLUB” Password on this unit, access the “LUMIX CLUB” website from
your smartphone or PC and change the “LUMIX CLUB” Password in advance.
1 Press Wi-Fi button and touch [Wi-Fi Setup].
2 Touch [LUMIX CLUB].
3 Touch [Add/Change Account].
4 Touch [
Change Account
].
The Login ID and Password are displayed.
The Password is displayed as “ ”.
5 Touch [
Login ID
] or [Password].
6 Enter the Login ID or Password, and touch [Enter].
For details on how to enter characters, refer to page 88.
Input the Password that was changed with the smartphone or the PC.
Register the Login ID of the smartphone (“Image App”) into this unit
It is convenient to match the Login IDs for this unit and the smartphone (“Image App”) when using
the Wi-Fi function utilising the “LUMIX CLUB”.
1 Connect this unit to the smartphone.
2 From the “Image App” menu, set the common Login ID.
Check the “LUMIX CLUB” terms of use
Check the details if the terms of use have been updated.
1 Press Wi-Fi button and touch [Wi-Fi Setup].
2 Touch [LUMIX CLUB].
3 Touch [Terms of use].
This unit will connect to the network and the terms of use will be displayed. Touch [EXIT] to close
the menu after checking the terms of use.
Delete your Login ID and account from the “LUMIX CLUB”
Delete the Login ID from this unit when transferring it to another party or disposing of it. You can
also delete your “LUMIX CLUB” account.
1 Press Wi-Fi button and touch [Wi-Fi Setup].
2 Touch [LUMIX CLUB].
3 Touch [Delete account].
The message is displayed. Touch [NEXT].
4 Touch [YES] in the Login ID delete confirmation screen.
The message is displayed. Touch [NEXT].
5 Touch [YES] on the confirmation screen for deleting the “LUMIX CLUB”
account.
The message is displayed. Touch [NEXT].
If you are not deleting the “LUMIX CLUB” account, only the Login ID will be erased when [NO] is
selected.
6 Touch [EXIT].
Changes and other actions to Login IDs can only be made to the Login ID acquired with this unit.
- 173 -
When sending images to WEB services, the WEB service being used must be registered with the
“LUMIX CLUB”. Registering multiple WEB services will send images to all services simultaneously.
Check the “FAQ/Contact us” on the following site for compatible WEB services.
http://lumixclub.panasonic.net/eng/c/
Preparation:
Make sure that you have created an account on the WEB service you want to use, and have the
login information available.
1 Connect to the “LUMIX CLUB” site using a smartphone or computer.
2 Enter your “LUMIX CLUB” Login ID and Password and log in to the service.
3 Save your e-mail address.
4 Select the WEB service to be used and save it.
Follow the instructions on the screen to save the service.
Using WEB services
- 174 -
HD Writer LE 2.1
You can copy the motion/still picture data to the HDD of PCs or write to media like Blu-ray discs,
DVD discs or SD cards using HD Writer LE 2.1, the software installed in the supplied CD-ROM.
Refer to the operating instructions of HD Writer LE 2.1 (PDF file) for details on how to use it.
Smart Wizard
The Smart Wizard Screen is automatically displayed when you connect this unit to a PC with
HD Writer LE 2.1 installed. (l 182)
Copy to PC:
You can copy motion/still picture data to the HDD of PCs.
Copy to disc:
You can copy to disc in high-definition picture quality.
Select the function you wish to use and follow the on-screen instructions for easy copying.
It is possible to play back still pictures on a PC using a image viewer standard to Windows or
commercially available image browsing software, and copy still pictures to a PC using Windows
Explorer.
Please refer to page 187 for details about using a Mac.
With a PC
What you can do with a PC
What can be done with the HD Writer LE 2.1 Data type
Copying data to a PC
Motion picture
and still picture
Copying in Blu-ray disc/AVCHD format:
The scenes recorded in 1080/50p can be copied as 1080/50p.
(l 175: Important Notice)
MP4/iFrame scenes cannot be copied in Blu-ray disc or in AVCHD format.
Editing:
Editing motion picture data copied on an HDD of a PC
Dividing, Trimming, Still picture, Title, Effect, Transition, BGM, Delete
partially
Converting part of motion picture into still picture
Motion picture
Online sharing:
You can upload motion pictures on the Internet and share them with your
family and friends.
Playing back on a PC:
Play back the motion picture data in high-definition picture quality on a PC.
Motion picture
and still picture
Formatting discs:
Depending on the type of disc that you use, formatting is necessary.
Motion picture
- 175 -
It is impossible to write data to this unit from a PC.
Motion pictures that have been recorded on another device cannot be written to the
software supplied with this unit.
When motion picture data is written to and read from the SD card, correct operation of the unit
cannot be guaranteed if software other than that supplied with the unit is used.
Do not start the software supplied with this unit and other software at the same time.
About Conversion Assist Function
When you want to convert the recording quality and write to media, the “Conversion Assist
Function”, which is a linking function between this unit and the HD Writer LE 2.1, is activated by
connecting this unit to the PC with the USB cable. When the “Conversion Assist Function” is used, it
is possible to write to media faster than when operating only on PC.
Please refer to page 182 for details about the connection of this unit and a PC.
Refer to the operating instructions of the software for details. (l 186)
Important Notice
When using an SDXC Memory Card, check the following support site.
http://panasonic.net/avc/sdcard/information/SDXC.html
Do not insert a disc recorded in AVCHD format with HD Writer LE 2.1 in a device that
does not support the AVCHD format. In some cases the disc may get stuck in the
device.
To play back a Blu-ray disc to which you have copied scenes recorded in 1080/50p,
equipment is required that supports AVCHD Progressive.
When inserting a disc containing recorded motion pictures into other devices, a
message prompting you to format the disc may be displayed. Do not format the disc,
since deleted data cannot be restored later.
- 176 -
End User License Agreement
Before opening the CD-ROM package, please read the following.
You (“Licensee”) are granted a license for the
Software defined in this End User License
Agreement (“Agreement”) on condition that you
agree to the terms and conditions of this
Agreement.
Article 1 License
Licensee is granted the right to use the
software, including the information recorded or
described on the CD-ROM, instruction manuals,
and any other media provided to Licensee
(collectively “Software”), but all applicable rights
to patents, copyrights, trademarks and trade
secrets in the Software are not transferred to
Licensee.
Article 2 Use by a Third Party
Licensee may not use, copy, modify, transfer,
rent, lease, lend or allow any third party,
whether free of charge or not, to use, copy or
modify the Software, except as expressly
provided for in this Agreement.
Article 3 Restrictions on Copying the Software
Licensee may make a single copy of the
Software in whole or a part solely for back-up
purpose.
Article 4 Computer
Licensee may use the Software only on one
computer, and may not use it on more than one
computer. Further, Licensee may not use the
Software for commercial software hosting
services.
Article 5 Reverse Engineering, Decompiling or
Disassembly
Licensee may not reverse engineer, decompile,
or disassemble the Software, except to the
extent either of them is permitted under law or
regulation of the country where Licensee
resides. Panasonic, or its distributors will not be
responsible for any defects in the Software or
damage to Licensee caused by Licensee’s
reverse engineering, decompiling, or
disassembly of the Software.
Article 6 Indemnification
The Software is provided “AS-IS” without
warranty of any kind, either expressed or
implied, including, but not limited to, warranties
of non-infringement, merchantability and/or
fitness for a particular purpose. Further,
Panasonic does not warrant that the operation
of the Software will be uninterrupted or error
free. Panasonic or any of its distributors will not
be liable for any damage suffered by Licensee
arising from or in connection with Licensee’s
use of the Software.
Article 7 Export Control
Licensee agrees not to export or re-export to
any country the Software in any form without
the appropriate export licenses under
regulations of the country where Licensee
resides, if necessary.
Article 8 Termination of License
The right granted to Licensee hereunder will be
automatically terminated if Licensee
contravenes any of the terms and conditions of
this Agreement. In this event, Licensee must
destroy the Software and related
documentation together with all the copies
thereof at Licensees own expense.
- 177 -
Article 9 With regard to MICROSOFT SQL
SERVER COMPACT 3.5 produced by Microsoft
Corporation
(1) Licensee shall use the MICROSOFT SQL
SERVER COMPACT 3.5 only when included in
the Software, and shall not use the
MICROSOFT SQL SERVER COMPACT 3.5 in
any other configuration or method. Licensee
shall not publish the MICROSOFT SQL
SERVER COMPACT 3.5 or work around any
technical limitations in the MICROSOFT SQL
SERVER COMPACT 3.5.
(2) Licensee shall not use, copy, distribute,
regrant for use or otherwise handle the
Software in any way beyond the range of use
granted under Article 9 (1), and shall not
conduct operations such as reverse
engineering, decompilation, disassembling, etc.
of the MICROSOFT SQL SERVER COMPACT
3.5.
(3) All rights, including copyright, patent rights
etc. relating to the MICROSOFT SQL SERVER
COMPACT 3.5 shall belong to Microsoft
Corporation. Licensee shall not claim any rights
related to the MICROSOFT SQL SERVER
COMPACT 3.5 whatsoever.
- 178 -
Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs
cannot be used.
A CD-ROM drive is necessary to install the supplied software applications. (A compatible Blu-ray
disc/DVD writer drive and media are necessary for writing to a Blu-ray disc/DVD.)
Operation is not guaranteed in the following cases.
j When 2 or more USB devices are connected to a PC, or when devices are connected through
USB hubs or by using extension cables.
j Operation on an upgraded OS.
j Operation on an OS other than the one pre-installed.
Operating environment for HD Writer LE 2.1
With a PC
Operating environment
OS Windows 8/Windows 8.1 (32 bit/64 bit)
Windows 7 (32 bit/64 bit) SP1
Windows Vista (32 bit) SP2
Windows XP (32 bit) SP3
CPU Intel Pentium 4 2.8 GHz or higher (including compatible CPU)
Intel Core 2 Duo 2.16 GHz or higher or AMD Athlon 64 X2 Dual-Core
5200+ or higher is recommended when using playback function.
Intel Core 2 Quad 2.6 GHz or higher is recommended when using
editing function in order to play seamless.
Intel Core i7 2.8 GHz or higher is recommended when using playback or
editing function for 1080/50p.
RAM Windows 7/Windows 8/Windows 8.1:
2 GB or more (64 bit)/1 GB or more (32 bit)
Windows Vista: 1 GB or more
Windows XP: 512 MB or more (1 GB or more recommended)
Display High Colour (16 bit) or more (32 bit or more recommended)
Desktop resolution of 1024k768 pixels or more (1920k1080 pixels or
more recommended)
Windows Vista/Windows 7/Windows 8/Windows 8.1:
DirectX 9.0c compatible video card (DirectX 10 recommended)
Windows XP: DirectX 9.0c compatible video card
Compatible with DirectDraw overlay
PCI Express™k16 compatible recommended
Video memory of 256 MB or more recommended
- 179 -
Supplied CD-ROM is available for Windows only.
Input is not supported in languages other than English, German, French, Simplified Chinese and
Russian.
Operation cannot be guaranteed on all Blu-ray disc/DVD drives.
Operation is not guaranteed on Windows XP Media Center Edition, Tablet PC Edition, Windows
Vista Enterprise, Windows 7 Enterprise, Windows 8 Enterprise, Windows 8.1 Enterprise or
Windows RT.
For Windows 8/Windows 8.1, this software is available only as a desktop application.
This software is not compatible with a multi-boot environment.
This software is not compatible with a multi-monitor environment.
If using Windows XP, an administrative account user only can use this software. If using Windows
Vista/Windows 7/Windows 8/Windows 8.1, administrative account and standard account users
only can use this software. (An administrative account user should install and uninstall this
software.)
Free hard disk drive
space
Ultra DMA — 100 or more
450 MB or more (for installing the software)
When writing to a DVD/Blu-ray disc/SD, more than double the amount of
free space as the disc being created is necessary.
Sound DirectSound Support
Interface USB port [Hi-Speed USB (USB 2.0)]
Other requirements Mouse or equivalent pointing device
Internet connection
- 180 -
To use the HD Writer LE 2.1
You will need a high performance PC depending on the functions to be used. It may not properly
play back or properly operate depending on the environment of the PC used. Refer to the operating
environment and notes.
Operation during the playback may become slow if the CPU or memory is not fulfilling the
requirements of the operating environment.
Always use the most current driver for the video card.
Always make sure there is enough capacity on the HDD in the PC. It may become inoperable or
the operation may stop suddenly if the capacity gets low.
Operating environment for the card reader function (mass storage)
Incorporation of data on the Microsoft Windows XP is guaranteed. But, other functions is not
guaranteed.
The USB equipment operates with the driver installed as standard in the OS.
OS Windows 8/Windows 8.1 (32 bit/64 bit)
Windows 7 (32 bit/64 bit) or SP1
Windows Vista
(32 bit)
SP2
CPU 1 GHz or higher
32-bit (k86) or 64-bit (k64) processor (including compatible CPU)
RAM Windows 7/Windows 8/Windows 8.1: 2 GB or more (64 bit)/1 GB or more
(32 bit)
Windows Vista Home Basic: 512 MB or more
Windows Vista Home Premium/Business/Ultimate/Enterprise:
1 GB or more
Interface USB port
Other requirements Mouse or equivalent pointing device
- 181 -
When installing the software, log on to your computer as the Administrator or with a user name with
equivalent authorisation. (If you do not have authorisation to do this, consult your manager.)
Before starting the installation, close all applications that are running.
Do not perform any other operations on your PC while the software is being installed.
Explanation of operations is based on Windows 7.
1 Insert the CD-ROM into the PC.
The autoplay screen is displayed automatically. Click [Run setup.exe] # [Yes].
If the autoplay screen is not displayed automatically, select [Start] # [Computer] (or double-click
on [Computer] on the desktop), and then double-click [Panasonic].
2 Click [Yes].
3 Click [Next].
Proceed with the installation by following the on-screen instructions.
If the country or region cannot be selected, select [PAL Area].
Uninstalling HD Writer LE 2.1
Follow the steps below to uninstall any software applications that you no longer require.
1 Select [Start] # [Control Panel] # [Uninstall a Program].
2 Select [HD Writer LE 2.1], then click [Uninstall].
Proceed with the uninstallation by following the on-screen instructions.
After uninstalling the software, be sure to reboot the PC.
With a PC
Installation
The PC must be rebooted for the application to work.
- 182 -
Connect this unit to the PC after the software applications are installed.
Remove the supplied CD-ROM from your PC.
A USB cable (supplied)
B Turn the side with the symbol up to connect the micro B end of the USB Cable to the USB
terminal of this unit.
Insert the plugs as far as they will go.
1 Connect this unit to the AC adaptor.
Use the AC adaptor to free you from worrying about the battery running down.
Connect with the AC adaptor when using the Conversion Assist Function.
2 Turn on the unit.
3 Connect this unit to a PC.
The USB function selection screen will appear.
4 Touch [PC] on the screen of this unit.
The Smart Wizard Screen is automatically displayed when HD Writer LE 2.1 is installed.
This unit is automatically recognised as an external drive of the PC. (l 184)
When you select an option other than [PC], reconnect the USB cable.
When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turn
the LCD monitor on.
Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any
other USB cables.)
When this unit is connected to a PC using a USB cable while the unit is turned on, power is also
supplied from the PC to this unit.
When performing reading/writing between a PC and an SD card, be aware that some SD card
slots built into PCs and some SD card readers are not compatible with the SDHC Memory Card or
SDXC Memory Card.
When using an SDXC Memory Card, check the following support site.
http://panasonic.net/avc/sdcard/information/SDXC.html
With a PC
Connecting to a PC
- 183 -
To disconnect USB cable safely
Select the icon in task tray displayed on the PC, and then click [Eject Panasonic Video
Camera].
Depending on your PC’s settings, this icon may not be displayed.
Charging the battery by connecting it to different devices
When using the battery, if you turn off the unit and connect it to a PC, Panasonic Blu-ray disc
recorder or Panasonic DVD recorder, the battery will charge.
When connecting this unit to a PC for the first time, make sure to connect this unit to the
PC with this unit turned on.
Insert the USB cable securely all the way. It will not operate properly if it is not inserted all the
way.
Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any
other USB cables.)
You cannot charge the battery by connecting the supplied DC cable.
Be sure to connect the unit directly to the PC, Blu-ray disc recorder or DVD recorder.
During charging, the status indicator flashes.
You cannot charge when the status indicator flashes rapidly, or when it does not light at all.
Charge using the AC adaptor. (l 11)
It will take 2 or 3 times longer to charge compared to when using the AC adaptor.
If the status indicator flashes at a particularly fast or slow rate, refer to page 201.
About the screen indication of the unit
Do not disconnect the USB cable, battery, or AC adaptor while the access lamp is on or card
access icon ( ) appears on the unit screen.
Do not disconnect the USB cable, battery, or AC adaptor while the access lamp is on or built-
in memory access icon ( ) appears on the unit screen.
If the screen does not change when the unit is operated while connected to a PC, disconnect
the battery and/or AC adaptor, wait approximately 1 minute, reconnect the battery and/or AC
adaptor, wait approximately 1 minute again, and then turn the unit back on. (Data may be
destroyed when above operation is performed while accessing the SD card or built-in
memory.)
HC-V550M
- 184 -
About the PC display
When the unit is connected to a PC, it is recognised as an external drive.
Removable disk (Example: ) is displayed in [Computer].
Example folder structure of an SD card:
Example folder structure of built-in memory:
The following data will be recorded.
1 Up to 999 still pictures in JPEG format
([S1000001.JPG] etc.)
2 MP4 format (1080/50p) motion picture
files ([S1000001.MP4] etc.)
3 MP4 format (720/25p) motion picture
files ([S1000001.MP4] etc.)
4 MP4 format (360/25p) motion picture
files ([S1000001.MP4] etc.)
5 iFrame format motion picture files
([S1000001.MP4] etc.)
6 JPEG format still pictures created from
the motion picture
7 //
JPEG format still pictures recorded in
Stop Motion Animation Assist Mode
8 The motion picture thumbnails
9 AVCHD format motion picture files
([00000.MTS] etc.)
: For management
We recommend using HD Writer LE 2.1 to
copy motion picture data.
Using Windows Explorer or other
programmes on the PC to copy, move or
rename files and folders recorded with this
unit will result in them being unusable with
HD Writer LE 2.1.
It is impossible to write data to the built-in
memory or SD card on this unit from a PC.
AVCHDTN
BDMV
DCIM
CAM_SD
100CDPFQ
AVCHD
PRIVATE
106CDPFT
103TDPBH
105CDPFS
PANA_EXT
101YBPHH
102XDPHH
104UDPBH
HC-V550M
AVCHDTN
BDMV
DCIM
CAM_MEM
100CDPFQ
106CDPFT
AVCHD
103TDPBH
105CDPFS
PANA_EXT
101YBPHH
102XDPHH
104UDPBH
HC-V550
HC-V550M
HC-V530
- 185 -
Copying your still pictures to
your PC
Card reader function (mass storage)
Still pictures recorded with this unit can be
copied to the PC with Explorer or other
programmes.
1 Double-click the folder that contains the
still pictures. ([DCIM] # [100CDPFQ]
etc.)
2 Drag and drop the still pictures onto the
destination folder (on the PC’s HDD).
Do not delete the SD card’s folders. Doing so
may make the SD card unusable in this unit.
When data not supported by this unit has
been recorded on a PC, it will not be
recognised by this unit.
Always use this unit to format SD cards.
- 186 -
To use the software, log on as an Administrator or as user name for standard user account (only
for Windows Vista/Windows 7/Windows 8/Windows 8.1).
The software cannot be used with the user name for a guest account.
(On the PC)
Select [Start] # [All Programs] # [Panasonic] # [HD Writer LE 2.1] #
[HD Writer LE 2.1].
For details on how to use the software applications, read the PDF operating instructions of the
software.
Reading the operating instructions of the software
applications
You will need Adobe Acrobat Reader 5.0 or later or Adobe Reader 7.0 or later to read the PDF
operating instructions.
Select [Start] # [All Programs] # [Panasonic] # [HD Writer LE 2.1] # [Operating
Instructions].
With a PC
Starting HD Writer LE 2.1
- 187 -
HD Writer LE 2.1 is not available for Mac.
iMovie supported. For details about iMovie, please contact Apple Inc.
Operating environment
Even if the system requirements mentioned in these operating instructions are fulfilled, some
computers cannot be used.
The USB equipment operates with the driver installed as standard in the OS.
Supplied CD-ROM is available for Windows only.
Copying still pictures on a Mac
1 Connect this unit to a Mac via the supplied USB cable.
The USB function selection screen will appear.
2 Touch [PC] on the screen of this unit.
This unit is automatically recognised as an external drive of Mac.
When you select an option other than [PC], reconnect the USB cable.
When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turn
the LCD monitor on.
3 Double-click [CAM_SD] displayed on the desktop.
For users who have , [CAM_SD] and [CAM_MEM] are displayed on the desktop.
Files are stored in [100CDPFQ] or [102CDPFT]
*
folder etc. in the [DCIM] folder.
*/ / only
4 Using a drag-and-drop operation, move the pictures you want to acquire or
the folder storing those pictures to any different folder on the Mac.
To disconnect USB cable safely
Drag [CAM_SD] disk icon to the [Trash], and then disconnect the USB cable.
For users who have , [CAM_SD] and [CAM_MEM] are displayed on the desktop.
With a PC
If using Mac
PC Mac
OS OS X v10.9
CPU Intel Core 2 Duo or better
RAM 4 GB or more
Interface USB port
Other requirements Mouse or equivalent pointing device
HC-V550M
HC-V550
HC-V550M
HC-V530
HC-V550M
- 188 -
*1 / only
*2 only
*3 / only
Recording indications
Others
Indications
Motion Picture Recording Mode Still Picture Recording Mode
HC-V550 HC-V530
HC-V550M
HC-V250 HC-V230
0h00m00s
R 1h20m
1h30m
+1
1h30m
1
/
100
OPEN
MF
0dB
+1
MEGA
R 3000
PRE-REC
10M
A
///////
Intelligent Auto Mode (l 45)
///////
Intelligent Auto Plus Mode (l 47)
///
Creative Control Mode (l 47)
/////////
/
Scene Mode (l 51)
Manual Mode (l 55)
Endless Loop Recording Mode
(l 53)
Stop Motion Animation Assist
Mode (l 54)
*1, 2
¥/; (Red) Recording
; (Green) Recording pause
0h00m00s Elapsed recording time (l 23)
(“h” is an abbreviation for hour, “m” for minute
and “s” for second.)
// Eye-Fi transfer (l 126)
Remaining battery power
(l 13)
MINI
8mm
SILN
INTV
MNL
1h30m Remaining battery time (l 13)
Built-in memory recording
possible status
*2
(White) Card recording possible status
(Green) Recognising the card
/////
//
Motion Picture Recording Mode (l 71)
R1h20m Remaining time for motion
picture recording (l 23)
Relay Recording (l 72)
*2
(White) Still picture recording icon
(Red) Recording still picture
R3000 Remaining number of still
pictures (l 26)
/////
Number of recording pixels for still pictures
(l 26, 77, 80)
In Playback Mode, the picture size is not
displayed for still pictures recorded with other
products that have different picture sizes from
the sizes shown above.
Ø10/Ø2 Self-timer Recording (l 67)
MEGA OIS (l 25)
ヮヱフ
ヒパベパ
ヮヱフ
ヘビパ
ヮヱフ
ㄊョㄓ㄂ㄎㄆ
10M
2.1M
7.4M 0.3M
7.7M
2M
MEGA
- 189 -
B
PRE-REC (l 67)
Time Lapse Recording (l 50)
Zoom Microphone (l 75)
Stereo Microphone (l 75)
Wind cut (l 75)
/
Power LCD (l 36)
// // / /
Image Stabilizer (l 60)/Optical Image
Stabilizer Lock (l 63)
*1,2
// / /
Image Stabilizer (l 43)/Optical Image
Stabilizer Lock (l 63)
*3
Picture Adjustment (l 76)
Digital Cinema Colour (l 74)
Brightness Adjustment
(Miniature Effect/8mm movie/
Silent movie) (l 48, 49)
Vividness Adjustment
(Miniature Effect) (l 48)
Colour balance Adjustment
(8mm movie) (l 49)
AF/AE tracking (l 62)
/ Level Shot Function (l 42)
*1, 2
Touch Shutter (l 64)
MF Manual Focus (l 58)
/// /
White Balance (l 56)
1/100 Shutter Speed (l 57)
OPEN/F2.0 Iris value (l 57)
0dB Gain value (l 57)
± (White)/¥ (Green)
Focus indication (l 25)
PRE-REC
+1
-
1
C
Display Touch Menu (l 19)
Backlight Compensation
(l 68)
Tele Macro (l 68)
Intelligent Contrast Control
(l 66)
Microphone Level (l 76)
/ Fade (White), Fade (Black)
(l 66)
Night Mode (l 68)
Intelligent Exposure (l 67)
World Time setting (l 31)
/
Recording mode switching icon
(l 17)
15. 11. 2014 Date indication (l 20)
12:34 Time indication (l 20)
- 190 -
Playback indications Indication of connection to
Wi-Fi [HC-V550]/[HC-V550M]/
[HC-V250]
Indication of connection to
USB HDD
Indication of connection to
other devices
Confirmatory indications
1/;/5//6//7/8/9/:/
D/E/;1/2;
Display during playback (l 28, 79)
0h00m00s Playback Time (l 28)
No.10 Scene Number
Repeat Playback (l 81)
Resume Playback (l 82)
100-0001 Still picture folder/file name
Transfer/Protected motion
pictures/still pictures (l 102,
125)
/// //
//
Play mode selection display (l 27)
AVCHD [1080/50p] scene
(l 27)
AVCHD [PH] scene (l 27)
AVCHD [HA] scene (l 27)
AVCHD [HG] scene (l 27)
AVCHD [HE] scene (l 27)
MP4 [1080/50p] scene (l 27)
MP4 [720/25p] scene (l 27)
MP4 [360/25p] scene (l 27)
iFrame scene (l 27)
Relay-recorded scene (l 72)
*2
Miniature-recorded scene
(l 48)
Time lapse-recorded scene
(l 50)
Scenes saved with Highlight
Playback (l 89)
// Eye-Fi transfer status (l 124)
50p
MINI
/ Wi-Fi connection status (wireless
access point) (l 157)
/ Wi-Fi connection status (Direct
connection) (l 157)
USB HDD Playback (l 119)
Accessing the card (l 122, 183)
Accessing the built-in memory
(l 122, 183)
*2
– (Time
display)
The built-in battery is low. (l 20)
Warning for recording of yourself
(l 21)
SD card is not inserted or is
incompatible.
- 191 -
Major confirmation/error messages to be indicated on the screen in text.
*1 / only
*2 only
Others
Messages
HC-V550
HC-V250
HC-V550M
PERIODICALLY MAKE BACK UP OF DATA IN BUILT-IN MEMORY.
*2
We recommend backing up important recorded motion pictures and still pictures periodically to
a PC, DVD disc etc. to protect it. (l 174) This message does not indicate that there is a
problem with this unit.
CHECK CARD.
This card is not compatible or it cannot be recognised by the unit.
If this message appears even though motion pictures and still pictures are recorded on an SD
card, the card may be unstable. Reinsert the SD card, then turn the unit off and then on again.
THIS BATTERY CANNOT BE USED.
Use a battery that is compatible with this unit. (l 10)
If using a Panasonic battery compatible with this unit, remove the battery and then insert it
again. If the message appears even after repeating this several times, this unit needs repair.
Detach the power and consult the dealer who you purchased this unit from. Do not attempt to
repair it by yourself.
You are attempting to connect an AC adaptor not compatible with this unit. Use the supplied
AC adaptor. (l 11)
THIS EXTERNAL DRIVE CANNOT BE USED./
PLEASE CHECK THE EXTERNAL DRIVE.
The external drive that this unit cannot recognise is connected. Check if the USB HDD can be
connected and used with this unit and try to reconnect. (l 115)
Failed to connect wireless access point/
No wireless access point found
*1, 2
Check the Wi-Fi set up of your wireless access point and smartphone.
[Easy Connection (WPS)] can establish a connection only between two devices: this unit and
a device that will connect to this unit. Check if multiple devices are trying to establish a
connection in the WPS waiting state simultaneously.
Read page 166 if the Wi-Fi connection cannot be established.
Connection failed. Please check network settings of connected device.
*1, 2
It may be impossible to connect from some Web services such as “LUMIX CLUB” and
USTREAM. Try to reconnect after waiting a short while.
Read page 166 if the Wi-Fi connection cannot be established.
Network disconnected.
*1, 2
When using [DLNA Play], if you do not operate the DLNA-compatible device you are
connected to for a while, it will be displayed. Check the status of the DLNA device you are
connected to.
- 192 -
About recovery
If faulty management information is found, the messages may appear and a repair is performed.
(Repairing may take time depending on the error.)
is displayed when abnormal management information is detected when the scenes are
displayed in thumbnail.
Use a sufficiently charged battery or the AC adaptor.
Depending on the condition of the data, it may not be possible to completely repair the data.
If recovery fails, it will not be possible to play back scenes recorded before the unit turned off.
When data recorded on another device is recovered, it may not be possible to play back the data
on this unit or the other device.
If recovery fails, turn the unit off and on again after waiting a while. If recovery fails repeatedly,
format a media on the unit. Please be aware that if a media is formatted, then all the data
recorded on the media will be erased.
If the thumbnail information is recovered, displaying the thumbnails may become slower.
- 193 -
It is not a malfunction in following cases
Others
Troubleshooting
A clicking sound is heard
when the unit is shaken.
This is the sound of the lens moving and is not a defect.
This sound will no longer be heard when the unit is turned on
and set this unit to the Motion Picture Recording Mode or Still
Picture Recording Mode.
Object seems to be
warped.
Object seems to be warped slightly when the object moves
across the image very fast, but this is because the unit is
using MOS for the image sensor. This is not a malfunction.
The lens or LCD monitor
fog up.
This is due to condensation. It is not a malfunction. Please
refer to page 3.
Power
Problem Check points
This unit cannot be turned
on.
This unit does not stay on
long enough.
Battery runs down quickly.
Charge the battery again to ensure it is sufficiently charged.
(l 11)
In cold places, the battery using time becomes shorter.
The battery has a limited life. If the operating time is still too
short even after the battery is fully charged, the battery has
worn out and needs to be replaced.
This unit is turned off
automatically.
If the unit turns off when you turn off the power to the TV
using the TV remote control, the VIERA Link is at work. If you
are not using the VIERA Link, set [VIERA Link] to [OFF].
(l 110)
This unit cannot be
operated though it is
turned on.
This unit does not operate
normally.
Remove the battery or AC adaptor, wait about 1 minute and
then reconnect the battery or AC adaptor. Then about
1 minute later, turn on the unit again. (Conducting the above
operation while the media is being accessed may damage the
data on the media.)
If normal operation is still not restored, detach the power
connected, and consult the dealer who you purchased this
unit from.
“ERROR OCCURRED.
PLEASE TURN UNIT OFF,
THEN TURN ON AGAIN.”
is displayed.
The unit has automatically detected an error. Restart the unit
by turning the unit off and on.
The unit will be turned off in about 1 minute if the unit is not
turned off and on.
Repair is needed if it is repeatedly displayed even if it is
restarted. Detach the power connected, and consult the
dealer who you purchased this unit from. Do not attempt to
repair the unit by yourself.
- 194 -
Indication
Problem Check points
Remaining battery
indication is not displayed
properly.
The remaining battery capacity indication is an
approximation.
If the remaining battery capacity indication is not displayed
correctly, fully charge the battery, discharge it and then
charge it again.
Recording
Problem Check points
The unit arbitrarily stops
recording.
Use an SD card that can be used for motion picture recording.
(l 14)
The recordable time may have shortened due to the
deterioration of the data writing speed or repeated recording
and deletion. Using the unit, format the SD card or built-in
memory. (l 38)
If [AGS] is [ON], record in the normal horizontal position or set
[AGS] to [OFF]. (l 73)
Auto Focus function does
not work.
Switch to Intelligent Auto Mode or Intelligent Auto Plus Mode.
If you are trying to record a scene which is hard to bring into
focus in Auto Focus Mode, use the Manual Focus Mode to
adjust the focus. (l 46, 58)
Colour balance of images
is strange when recording
in a place such as a
gymnasium.
In a place with multiple light sources, such as a gymnasium or
a hall, set the White Balance setting to (Indoor mode 2).
If you cannot record clearly with the (Indoor mode 2), set
it to (Manual adjustment mode). (l 56)
Colour or brightness of
the image changes, or you
may see horizontal bars in
the image.
The LCD monitor flickers
indoors.
Colour or brightness of the image may change, or you may
see horizontal bars in the image when the object is recorded
under fluorescent light, mercury light or sodium light, etc., but
this is not a malfunction.
In Motion Picture Recording Mode, record in Intelligent Auto
Mode/Intelligent Auto Plus Mode or set the shutter speed to
1/100 in areas where the power supply frequency is 50 Hz, or
1/125 in areas of 60 Hz.
In Still Picture Recording Mode, this will not affect the
recorded image.
/
“CONDITION TOO DARK,
OR OPEN LENS COVER.”
is displayed.
Before turning on the unit, open the lens cover.
This message may also be displayed when recording in a
very dark location.
HC-V250
HC-V230
- 195 -
Playback
Problem Check points
Scenes/still pictures
cannot be played back.
Any scenes/still pictures where the thumbnails are displayed
as cannot be played back.
Scenes cannot be deleted. Release the protect setting. (l 102)
Any scenes/still pictures where the thumbnails are displayed
as cannot be deleted. If the scenes/still pictures are
unnecessary, format the media to erase the data. (l 38)
Please be aware that if a media is formatted then all the data
recorded on the media is erased and cannot be recovered.
Back up important data on a PC, disc etc.
With other products
Problem Check points
Even when this unit is
correctly connected to a
TV, images or sounds are
not output.
The images are squeezed
horizontally.
Please read the operating instructions of your TV and select
the channel that matches the input used for the connection.
Change the [TV ASPECT] setting to match the aspect ratio of
the TV. (l 108)
The audio during playback mode is not output from this unit
when connected to a TV. Sound levels cannot be adjusted
using this unit, so adjust the sound on the TV.
Even when this unit is
connected to the TV by the
HDMI mini cable, images
or sounds are not output.
Check if the HDMI mini cable is connected correctly.
Insert the HDMI mini cable all the way in.
If the SD card is inserted in
another device, it is not
recognised.
Check that the device is compatible with the capacity or type
of SD card (SD Memory Card/SDHC Memory Card/SDXC
Memory Card) that you inserted. Refer to the operating
instructions of the device for details.
When connected by the
USB cable, this unit is not
detected by the other
devices.
When connected to other devices using only the battery,
reconnect using the AC adaptor.
VIERA Link does not work. (Setting on this unit)
Connect with a HDMI mini cable (supplied). (l 106)
Touch , then touch [SETUP] # [VIERA Link] # [ON].
(l 110)
Turn the unit off and then back on again.
(Setting on other devices)
If the TV input does not switch automatically, switch the input
using the TV remote control.
Check the VIERA Link setting on the connected device.
Please refer to the operating instructions of the connected
device.
MENU
- 196 -
Cannot copy scenes on
the SD card by connecting
to other equipment with
the USB cable.
Other equipment might have not recognised the SD card.
Unplug the USB cable once, and reconnect it.
With a PC
Problem Check points
When connected by the
USB cable, this unit is not
detected by the PC.
After re-inserting the SD card into the unit, reconnect the
supplied USB cable.
Select another USB terminal on the PC.
Check the operating environment. (l 178, 187)
Connect the supplied USB cable again after restarting the PC
and turning on this unit again.
When the USB cable is
disconnected, an error
message will appear on
the PC.
To disconnect the USB cable safely, double-click the
icon in the task tray and follow the instructions on the screen.
Cannot see the PDF
operating instructions for
HD Writer LE 2.1.
You will need Adobe Acrobat Reader 5.0 or later or Adobe
Reader 7.0 or later to read the PDF operating instructions for
HD Writer LE 2.1.
About the Wi-Fi function [HC-V550]/[HC-V550M]/[HC-V250]
Problem Check points
Cannot connect to
wireless access point or
smartphone.
Read page 166 if the Wi-Fi connection cannot be established.
Cannot operate from
smartphone using
[Remote Ctrl].
Install the smartphone app “Image App” on your smartphone.
(l 156)
When I look at the
recording screen with the
smartphone, mosaic-like
noise appears on the
screen and the image
movement does not look
smooth.
If you set [REC MODE] to AVCHD [1080/50p] or MP4/iFrame
[1080] in Motion Picture Recording Mode, mosaic-like noise
may appear on the screen and the image movement may not
look smooth. (These will not affect the recorded image.)
Cannot use [DLNA Play]. Make sure the television is compatible with DLNA. Read the
instructions for the television you are using.
Make sure the wireless access point and this device are
properly connected.
Approach the wireless access point and reconnect.
If a connection cannot be made between this device and a
DLNA-compatible device, try to reconnect and make sure
they connect properly.
With other products
Problem Check points
- 197 -
The live broadcast screen
will not be displayed.
Make sure the “LUMIX CLUB” Login ID and Password have
been input correctly.
Use a PC or smartphone to make sure the USTREAM
account registration is complete.
Use a PC or smartphone to register and set up USTREAM
from a “LUMIX CLUB” linked service.(l 151)
“LUMIX CLUB” or USTREAM lines may be congested. Retry
the live broadcast after waiting a short while.
[Hom.Monitor] cannot be
used.
Make sure the wireless access point is connected to the
Internet.
Make sure the wireless access point and this unit are properly
connected.(l 159)
I have forgotten the
password for the Wi-Fi.
Perform [Reset Wi-Fi Settings] from the Setup menu (l 37).
This will set the Wi-Fi setting to the condition at the time of
purchase, and you will be able to use the Wi-Fi setting menu.
When performing [Reset Wi-Fi Settings], all Wi-Fi settings
including the “LUMIX CLUB” Login ID and registered wireless
access points will be deleted.
I have forgotten the Login
ID or Password for the
“LUMIX CLUB”.
Check the information in the login screen of “LUMIX CLUB”.
http://lumixclub.panasonic.net/eng/c/
Others
Problem Check points
If the SD card is inserted in
this unit, it is not
recognised.
If the SD card is formatted on a PC, it may not be recognised
by this unit. Use this unit to format SD cards. (l 38)
About the Wi-Fi function [HC-V550]/[HC-V550M]/[HC-V250]
Problem Check points
- 198 -
If AVCHD scenes do not change smoothly when played back on
another device
The images may be still for several seconds at the joins between the scenes if the following
operations are performed when multiple scenes have been continuously played back using another
unit.
Just how smoothly the scenes will be played back depends on the playback unit. Depending on
the unit used, the images may stop moving and become still for a moment even when none of the
following conditions are applicable.
A continuous recording of motion picture data that exceeds 4 GB may momentarily stop at every
4 GB of data when played back with another device.
It may not play back smoothly when the editing of scenes was done with the HD Writer LE 2.1,
but it will play back smoothly if you set the seamless settings in the HD Writer LE 2.1. Refer to the
operating instructions for the HD Writer LE 2.1.
Principal reasons for not playing back smoothly
When the scenes were recorded on different dates
When scenes lasting under 3 seconds have been recorded
When PRE-REC was used for recording
When the Miniature Effect recording is used
When the Time Lapse Recording is used
When deleting scenes
When selected scenes are copied between an SD card and the built-in memory
When scenes recorded more than 99 scenes on the same date
HC-V550M
- 199 -
Keep this unit as far away as possible from
electromagnetic equipment (such as
microwave ovens, TVs, video games etc.).
If you use this unit on top of or near a TV, the
pictures and/or sound on this unit may be
disrupted by electromagnetic wave radiation.
Do not use this unit near cell phones because
doing so may result in noise adversely
affecting the pictures and/or sound.
Recorded data may be damaged, or pictures
may be distorted, by strong magnetic fields
created by speakers or large motors.
Electromagnetic wave radiation generated by
microprocessors may adversely affect this
unit, disturbing the pictures and/or sound.
If this unit is adversely affected by
electromagnetic equipment and stops
functioning properly, turn this unit off and
remove the battery or disconnect AC adaptor.
Then reinsert the battery or reconnect AC
adaptor and turn this unit on.
Do not use this unit near radio transmitters
or high-voltage lines.
If you record near radio transmitters or
high-voltage lines, the recorded pictures and/
or sound may be adversely affected.
Make sure to use the supplied cords and
cables. If you use optional accessories, use
the cords and the cables supplied with
them.
Do not extend the cords and the cables.
Do not spray insecticides or volatile
chemicals onto the unit.
If the unit is sprayed with such chemicals, its
body may be marred and the surface finish
may peel off.
Do not leave rubber or plastic products in
contact with the unit for a long time.
When you use the unit in a sandy or dusty
place such as a beach, do not let sand or
fine dust get into the body and terminals of
the unit.
Also, keep the unit away from sea water.
Sand or dust may damage the unit. (Care
should be taken when inserting and removing
a card.)
If sea water splashes onto the unit, wipe off
the water with a well wrung cloth. Then wipe
the unit again with a dry cloth.
When carrying the unit, do not drop or bump
it.
A strong impact can break the unit’s casing,
causing it to malfunction.
Cleaning
Before cleaning, detach the battery or pull the
AC adaptor from the AC outlet, and then wipe
the unit with a soft, dry cloth.
If the unit is very dirty, dip a cloth in water and
squeeze firmly, and then wipe the unit with
the damp cloth. Next, dry the unit with a dry
cloth.
Use of benzine, paint thinner, alcohol, or
dishwashing liquid may alter the camera body
or peel the surface finish. Do not use these
solvents.
When using a chemical dust cloth, follow the
instructions that came with the cloth.
Others
Cautions for use
About this unit
The unit and the SD card become warm
during use. This is not a malfunction.
- 200 -
Do not use the unit for surveillance
purposes or other business uses.
This unit was designed for consumer
intermittent use. It was not intended for
continuous use, or for any industrial or
commercial application resulting in prolonged
use.
In certain situations, continuous use could
cause the unit to overheat and cause a
malfunction. Such use is strongly
discouraged.
When you are not going to use the unit for
an extended time
When storing the unit in a cupboard or
cabinet, it is recommended that you place a
desiccant (silica gel) in with it.
When disposing of or giving away this unit,
note that:
Formatting and deletion simply change the
file management information and cannot be
used to completely erase the data in built-in
memory of this unit. The data can be
recovered using commercially available
software or the like.
We recommend that you physically format
the built-in memory before disposing of or
giving away this unit.
To physically format the built-in memory,
connect the unit via the AC adaptor, select
[SETUP] #[FORMAT MEDIA] # [Built-
inMemory] from the menu, and then press
and hold the recording start/stop button on
the screen below for about 3 seconds. When
the built-in memory data deletion screen
appears, select [YES], and then follow the
on-screen instructions.
Please look after the data in your built-in
memory carefully. Panasonic will not be held
responsible in the unlikely case that private
data is divulged.
The battery used in this unit is a rechargeable
lithium-ion battery. It is susceptible to humidity
and temperature and the effect increases the
more the temperature rises or falls. In cold
areas, the full charge indication may not appear
or the low battery indication may appear about
5 minutes after starting use. At high
temperatures, the protection function may be
triggered, making it impossible to use the unit.
Be sure to detach the battery after use.
If the battery is left attached, a minute amount
of current continues to flow even if the unit is
off. Keeping the unit in this state may result in
over discharge of the battery. This may result
in you not being able to use the battery even
after it is charged.
The battery should be stored in the vinyl bag
so metal does not come into contact with the
terminals.
The battery should be stored in a cool place
free from humidity, with as constant
temperature as possible. (Recommended
temperature: 15 oC to 25 oC, Recommended
humidity: 40%RH to 60%RH)
Extremely high temperatures or low
temperatures will shorten the life of the
battery.
If the battery is kept in high-temperature,
high-humidity, or oily-smoky places, the
terminals may rust and cause malfunctions.
To store the battery for a long period of time,
we recommend you charge it once every year
and store it again after you have completely
used up the charged capacity.
Dust and other matter attached to the battery
terminals should be removed.
HC-V550M
About the battery
- 201 -
Prepare spare batteries when going out for
recording.
Prepare batteries enough to last for 3 to 4
times the period you are planning to record
for. Cold places such as a ski resort can
shorten recording time.
If you drop the battery accidentally, check to
see if the terminals are damaged.
Inserting a battery with damaged terminals
can damage the unit.
Do not throw an old battery into fire.
Heating a battery or throwing it into a fire may
result in an explosion.
If the operating time is very short even after
the battery has been recharged, the battery
has worn out. Please purchase a new
battery.
If the temperature of the battery is extremely
high or extremely low, charging may take time
or the battery may not be charged.
If you use the AC adaptor near a radio, radio
reception may be disturbed. Keep the AC
adaptor 1 m or more away from the radio.
When using the AC adaptor, it may generate
whirring sounds. However, this is normal.
After use, be sure to disconnect the AC
adaptor. (If it is left connected, a minute
amount of current is consumed.)
Always keep the electrodes of the AC
adaptor and battery clean.
When the status indicator is flashing at a
particularly fast or slow rate, the following
should be considered.
Flashing with approx. 4 second period (off
for approx. 2 seconds, on for approx.
2 seconds):
When the battery is over discharged or the
temperature of the battery is too high or low.
It can be charged, but it may take a few hours
to complete the charging normally.
It will flash in approx. 2 second intervals
when normal charging resumes. Even in such
cases, it may start flashing in approx.
4 second intervals until charging is completed
depending on the conditions of use.
Flashing with approx. 0.5 second period (off
for approx. 0.25 second, on for approx.
0.25 second):
The battery is not charged. Remove the
battery from the unit, and try charging again.
Check that the terminals of the unit or battery
are not dirty or covered with a foreign object,
and connect the battery correctly once again.
If a foreign object or dirt is present, turn off
the unit before removing.
The battery or environment is at an extremely
high or low temperature. Wait until the
temperature has returned to an appropriate
level and try charging again. If you are still
unable to charge, there may be a fault in the
unit, battery or AC adaptor.
Off:
Charging has finished.
If the status indicator stays off despite the
charging being unfinished, there may be a
fault in the unit, battery or AC adaptor. Refer
to page 200 for details on the battery.
About the AC adaptor
About status indicator during
charging
- 202 -
When disposing of or giving away the SD
card, note that:
Formatting and deletion of data on this unit or
computer only changes the file management
information and does not completely delete
the data in the SD card.
It is recommended that the SD card is
physically destroyed or the SD card is
physically formatted using this unit when
disposing of or giving away the SD card.
///
To physically format the SD card, connect the
unit via the AC adaptor, select [SETUP] #
[FORMAT MEDIA] # [YES] from the menu,
and then press and hold the recording start/
stop button on the screen below for about 3
seconds. When the SD card data deletion
screen appears, select [YES], and then follow
the on-screen instructions.
To physically format the SD card, connect the
unit via the AC adaptor, select [SETUP]
#[FORMAT MEDIA] # [SD CARD] from the
menu, and then press and hold the recording
start/stop button on the screen below for
about 3 seconds. When the SD card data
deletion screen appears, select [YES], and
then follow the on-screen instructions.
The customer is responsible for the
management of the data in the SD card.
When the LCD screen is dirty or
condensation has occurred, please wipe it
using a soft cloth such as eyeglass cleaner.
Do not touch the LCD monitor with your
fingernails, or rub or press with strong force.
It may become hard to see or hard to
recognise the touch when the LCD protection
sheet is affixed.
When the unit has become very cold, for
example due to storage in a cold area, its
LCD monitor will be slightly darker than usual
immediately after the unit is turned on. The
normal brightness will be restored when the
unit’s internal temperature rises.
About the SD card
HC-V550 HC-V530 HC-V250
HC-V230
HC-V550M
LCD monitor
Extremely high precision technology is
employed to produce the LCD Monitor
screen. The result is more than 99.99%
effective dots with a mere 0.01% of the dots
inactive or always lit. However, this is not a
malfunction and does not affect the recorded
picture.
- 203 -
When a name or birthday is set by Baby
Calendar, personal information will be included
in this unit.
//
When the Wi-Fi function is used, the SSID,
Password, and other personal information will
be included in this unit.
Setting a Wi-Fi password is recommended to
protect personal information. (l 169)
Disclaimer
Information including personal information
may be altered or vanish due to erroneous
operation, effect of static electricity, accident,
malfunction, repair, or other handlings.
Please note in advance that Panasonic is not
liable in any way for any direct or indirect
damage from the alteration or vanishing of
information or personal information.
When requesting a repair, transferring to
another party, or disposing.
//
After making a copy of personal information,
always delete information such as personal
information and wireless LAN connection
settings that you have saved within this unit
with [Reset Wi-Fi Settings]/[Delete account].
(l 37, 172)
To protect personal information, delete the
registered details of Baby Calendar unless
they are necessary for the repair. (l 94)
Remove the Memory Card from this unit
when requesting a repair.
Settings may return to factory default when
this unit is repaired.
Please contact the dealer where you
purchased this unit or Panasonic if above
operations are not possible due to
malfunction.
When transferring to another party, or
disposing of the Memory Card, please refer
to “When disposing of or giving away the
SD card, note that:”. (l 202)
When uploading images on web services
Images may contain information that can be
used for identifying individuals such as titles
and recording dates. When uploading images
on web services, check carefully, and then
upload.
About personal information
HC-V550
HC-V550M
HC-V250
HC-V550
HC-V550M
HC-V250
- 204 -
Carefully observe copyright
laws
Recording of pre-recorded tapes or discs or
other published or broadcast material for
purposes other than your own private use
may infringe copyright laws. Even for the
purpose of private use, recording of certain
material may be restricted.
Licenses
SDXC Logo is a trademark of SD-3C, LLC.
“AVCHD”, “AVCHD Progressive” and the
“AVCHD Progressive” logo are trademarks of
Panasonic Corporation and Sony
Corporation.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
HDMI, the HDMI Logo, and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing
LLC in the United States and other countries.
HDAVI Control
is a trademark of Panasonic
Corporation.
x.v.Colour
is a trademark.
Microsoft
®
, Windows
®
and
Windows Vista
®
are either registered trademarks or
trademarks of Microsoft Corporation in the
United States and/or other countries.
Microsoft product screen shot(s) reprinted
with permission from Microsoft Corporation.
IBM and PC/AT are registered trademarks of
International Business Machines Corporation
of the U.S.
Intel
®
, Pentium
®
, Celeron
®
and Intel
®
Core
are trademarks of Intel Corporation in the
U.S. and/or other countries.
AMD Athlon™ is a trademark of Advanced
Micro Devices, Inc.
iMovie, Mac and Mac OS are trademarks of
Apple Inc. registered in the U.S. and other
countries.
App Store is a service mark of Apple Inc.
Android and Google Play are trademarks or
registered trademarks of Google Inc.
The Wi-Fi CERTIFIED Logo is a certification
mark of the Wi-Fi Alliance.
The Wi-Fi Protected Setup Mark is a mark of
the Wi-Fi Alliance.
“Wi-Fi”, “Wi-Fi Protected Setup”, “WPA” and
“WPA2” are marks or registered marks of the
Wi-Fi Alliance.
The N-Mark is a trademark or registered
trademark of NFC Forum, Inc. in the United
States and in other countries.
DLNA, the DLNA Logo and DLNA
CERTIFIED are trademarks, service marks,
or certification marks of the Digital Living
Network Alliance.
QR Code is a registered trademark of
DENSO WAVE INCORPORATED.
“Eye-Fi” is a trademark of Eye-Fi, Inc.
Other names of systems and products
mentioned in these instructions are usually
the registered trademarks or trademarks of
the manufacturers who developed the system
or product concerned.
This product is licensed under the AVC patent
portfolio license for the personal and
non-commercial use of a consumer to (i)
encode video in compliance with the AVC
Standard (“AVC Video”) and/or (ii) decode AVC
Video that was encoded by a consumer
engaged in a personal and non-commercial
activity and/or was obtained from a video
provider licensed to provide AVC Video. No
license is granted or shall be implied for any
other use. Additional information may be
obtained from MPEG LA, LLC.
See http://www.mpegla.com
.
Others
About copyright
- 205 -
This product incorporates the following software:
(1) the software developed independently by or for Panasonic Corporation,
(2) the software owned by third party and licensed to Panasonic Corporation,
(3) the software licensed under the GNU General Public License, Version 2.0 (GPL V2.0),
(4) the software licensed under the GNU LESSER General Public License, Version 2.1
(LGPL V2.1), and/or
(5) open source software other than the software licensed under the GPL V2.0 and/or LGPL V2.1.
The software categorized as (3) - (5) are distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE. Please refer to the detailed terms and conditions thereof shown in the
attached Application Software CD-ROM.
At least three (3) years from delivery of this product, Panasonic will give to any third party who
contacts us at the contact information provided below, for a charge no more than our cost of
physically performing source code distribution, a complete machine-readable copy of the
corresponding source code covered under GPL V2.0 or LGPL V2.1, as well as the respective
copyright notice thereof.
Contact Information: oss-cd-request@gg.jp.panasonic.com
The source code and the copyright notice are also available for free in our website below.
http://panasonic.net/avc/oss/index.html
- 206 -
SD cards are only mentioned with their main memory size. The stated times are the approximate
recordable times for continuous recording.
A Favours image quality
B Favours Recording time
“h” is an abbreviation for hour, “min” for minute and “s” for second.
If recording for long periods, prepare batteries for 3 or 4 times the period you wish to record for.
(l 12)
The default setting for [REC FORMAT] is [AVCHD], and the default setting for [REC MODE] is
[HG].
Maximum continuously recordable time for one scene: 6 hours
The recording is paused once when the recording time for one scene exceeds 6 hours, and the
recording will automatically resume after a few seconds.
The recordable time may be reduced if recording with a lot of action is recorded or recording of
short scene is repeated.
Use time in the row of 4 GB in above table as a guideline for the time that can be copied onto one
DVD disc (4.7 GB).
Others
Recording modes/approximate
recordable time
Recording format [AVCHD]
Recording mode [1080/50p]
[1080/50i]
[PH] [HA] [HG] [HE]
Picture size/
Frame rate
1920
k
1080/
50p
1920
k
1080/
50i
1920
k
1080/
50i
1920
k
1080/
50i
1920
k
1080/
50i
SD card
4GB 19min 21min 30min 40min 1h30min
16 GB 1h20min 1h30min 2h 2h40min 6h40min
64 GB 5h20min 6h 8h30min 11h
27h30min
Built-in
memory
16 GB 1h20min 1h30min 2h 2h40min 6h40min
Recording format [MP4/iFrame]
Recording mode [1080] [720] [iFrame]
Picture size/
Frame rate
1920
k
1080/
50p
1280
k
720/
25p
960
k
540/
25p
SD card
4GB 19min1h19min
16 GB 1h20min 4h10min 1h20min
64 GB 5h20min 16h50min 5h20min
Built-in
memory
16 GB 1h20min 4h10min 1h20min
HC-V550M
HC-V550M
- 207 -
SD cards are only mentioned with their main memory size. The stated number is the approximate
number of recordable pictures.
The number of recordable pictures depends on the subject being recorded.
Maximum number of recordable pictures that can be displayed is 9999. If the number of
recordable pictures exceeds 9999, R 9999+ is displayed. The number will not change when the
picture is taken until the number of recordable pictures is 9999 or less.
The memory capacity indicated on the label of an SD card is the total of the capacity for copyright
protection and management and the capacity which can be used on the unit, a PC etc.
Others
Approximate number of recordable
pictures
Picture size
4224k2376 1920k1080 3136k2352 640k480
Aspect ratio [16:9] [4:3]
SD card
4GB 600 3200 800 28000
16 GB 2500 12500 3300 117000
64 GB 10000 52000 13000 475000
Built-in memory
16 GB 2500 12500 3300 117000
Picture size
3408k2272 1728k1152
Aspect ratio [3:2]
SD card
4GB 800 2200
16 GB 3200 8500
64 GB 13000 36000
Built-in memory
16 GB 3200 8500
10M
2.1M
7.4M
0.3M
HC-V550M
7.7M
2M
HC-V550M
- 208 -
Some optional accessories may not be available in some countries.
You can attach the Suction Cup Mount (VW-SCA100) as follows.
For information on how to mount the Video Camera Mount (For Handlebar) RP-CMC10E, refer to
the operating instructions for it.
When attaching the Suction Cup Mount
1 Align tripod receptacle A of this unit
with camera screw B of the suction cup
mount.
2 Turn camera lock dial C of the Suction
Cup Mount in the direction of the arrow
(the LOCK side) to lock it.
Hold this unit with your fingers to prevent it from
turning with the dial.
When removing the Suction Cup Mount
To remove the suction cup mount, perform the steps for mounting it in reverse order.
The screen may shake during recording. We recommend that you record an image as follows:
j Close the LCD monitor during recording (The recording will continue)
j Set the zoom magnification to 1k
j //
[O.I.S.] is set to (l 60)
/
[O.I.S.] is set to (l 43, 61)
Depending on recording conditions, even if you record the image as described above, the screen
may shake.
If you experience fatigue, a feeling of discomfort or other symptoms when playing back a scene
recorded with the Suction Cup Mount/Video Camera Mount (For Handlebar), stop the playback.
Others
Optional accessories
About the Suction Cup Mount/the Video Camera Mount (For
Handlebar)
U
N
L
O
C
K
L
O
C
K
HC-V550
HC-V530
HC-V250 HC-V230
- 209 -
About the Remote Pan Tilt Cradle
If you connect this unit to the Remote Pan Tilt Cradle VW-CTR1 (optional) by USB cable, this unit
can automatically track the movement of the subject being recorded. This unit zooms in/out the
image automatically, and the Remote Pan Tilt Cradle pans and tilts this unit.
1 Attach this unit to the Remote Pan Tilt Cradle.
For details on attachment method, refer to the operating instructions of Remote Pan Tilt Cradle.
2 Connect the Remote Pan Tilt Cradle to this unit using the USB cable
(supplied with this unit).
A Turn the side with the symbol up to connect the micro B end of the USB Cable to the USB
terminal of this unit.
3 Press the power button of the Remote Pan Tilt
Cradle to turn it on.
The status indicator B lights on.
4 Turn on this unit.
5 Touch [Remote Pan Tilt Cradle].
The Remote Pan Tilt Cradle Mode selection screen is
displayed.
If you have touched an item other than [Remote Pan Tilt Cradle] or if the Remote Pan Tilt Cradle
is not recognised correctly, reconnect the USB cable.
If you turn off and on this unit with the USB cable connected, this unit may operate in the previous
Remote Pan Tilt Cradle Mode.
//
Using Wi-Fi functions in combination with the Remote Pan Tilt Cradle
The Remote Pan Tilt Cradle can also be used by the following Wi-Fi functions. Make the Wi-Fi
connection after connecting the Remote Pan Tilt Cradle to this unit.
j [Remote Ctrl] (l 129)
j [Baby Monitor] (l 135)
j [Hom.Monitor] (l 138)
When [Party Scene] or [Moving Object] is being used, moving object detection with
[Hom.Monitor] will not work. (l 142, 210)
When [Baby Monitor] is being used, [Party Scene] and [Moving Object] cannot be used. (
l
210)
Refer to [Help] in the “Image App” menu about operation methods on smartphones.
Connecting the Remote Pan Tilt Cradle to this unit
HC-V550
HC-V550M
HC-V250
Power button
- 210 -
6 Install the Remote Pan Tilt Cradle so that its
home position will face the front of the subject.
The home position runs through the centre of the power
button.
Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any
other USB cables.)
As shown in the illustration, connect the USB cable or DC cable so that it
will not be caught in objects such as the moving part of the Remote Pan
Tilt Cradle and other cables. If the cable is caught in the moving part of
the Remote Pan Tilt Cradle, it may cause the recording position to
change or cause a malfunction.
Install the Remote Pan Tilt Cradle in a location that meets the following
requirements:
j A location out of the reach of children and pets
j A level location with no obstacles
j A location approximately 2 to 3 m away from subjects
Before mounting this unit on the Remote Pan Tilt Cradle, insert the SD card and the battery.
When this unit is mounted on the Remote Pan Tilt Cradle, make sure to hold the Remote Pan Tilt
Cradle to carry them. Carrying them by holding this unit may cause malfunction.
Do not use the Remote Pan Tilt Cradle for surveillance purposes.
Do not force the Remote Pan Tilt Cradle to stop moving during panning/tilting operation.
The Remote Pan Tilt Cradle is not capable of supplying power to this unit.
When the Remote Pan Tilt Cradle detects a problem, its status indicator flashes, and both this
unit and the Remote Pan Tilt Cradle turn off.
Connecting the Remote Pan Tilt Cradle to this unit. (l 209)
Set [Panning Angle]/[Tilt Angle]/[Tilt Speed] in advance. (l 212)
1 Touch the desired Remote Pan Tilt Cradle Mode.
If you touch [SETUP], the Setup menu will be displayed. (l 212)
Home position
Using the Remote Pan Tilt Cradle
Mode
Operation of the
Remote Pan Tilt Cradle
Description
[Party Scene]
The operation is automatic.
The Remote Pan Tilt
Cradle works within the
recording range set in
[Panning Angle]/[Tilt
Angle].
At an event such as a party, recording will be
performed while the Remote Pan Tilt Cradle
automatically controls the recording direction
within the recording range.
When a person or a moving object is detected,
recording of the person or the object takes
priority for a specific period of time.
[Moving Object]
When a moving object is detected within the
recording range, the object will be tracked
and recorded automatically.
[Manual]
The operation is manual. This mode lets you manually operate the
Remote Pan Tilt Cradle.
- 211 -
2 (When [Manual] is selected)
Touch , and operate the Remote Pan Tilt Cradle with / / / .
When you finish the operation, touch [ENTER].
3 Press the recording start/stop button.
(When [Party Scene]/[Moving Object] is selected)
Before recording starts, the Remote Pan Tilt Cradle rotates and returns to its home position. It
takes time until recording starts.
The Remote Pan Tilt Cradle operates within the range set in advance.
(When [Manual] is selected)
Performing the operation of Step 2 during recording may cause the recording screen to shake or
the Remote Pan Tilt Cradle to move from its original location.
To switch the Remote Pan Tilt Cradle Mode
Tou c h .
The selection screen of the Remote Pan Tilt Cradle Mode is displayed. Touch the desired mode.
To exit the Remote Pan Tilt Cradle
Tou c h [ E XI T] .
The Remote Pan Tilt Cradle rotates and returns to its home position.
After the operation, the Remote Pan Tilt Cradle turns off. Before removing this unit, disconnect
the USB cable.
When this unit is connected to the Remote Pan Tilt Cradle, this unit is set to Motion Picture
Recording Mode. You cannot switch this unit to Still Picture Recording Mode.
We recommend that you make a test recording in advance to check if the image and sound are
recorded correctly.
The sound of the Remote Pan Tilt Cradle in operation will be recorded.
If you start recording after making changes to the setup of the Remote Pan Tilt Cradle, such as
switching the Remote Pan Tilt Cradle Mode or changing the location of the Remote Pan Tilt
Cradle, it may rotate and return to its home position.
Once the operation starts, do not disconnect the USB cable or move the Remote Pan Tilt Cradle
and this unit until the operation is finished. This may cause a malfunction or the motion picture not
to be recorded correctly.
When you press the power button or when [ECONOMY (BATT)] (l 34) or [ECONOMY (AC)]
(l 34) works, this unit and the Remote Pan Tilt Cradle will turn off after the Remote Pan Tilt
Cradle rotates and returns to its home position.
When the Remote Pan Tilt Cradle is in operation, neither [ECONOMY (BATT)] nor [ECONOMY
(AC)] will work.
The following functions will be set to [OFF]:
j //
Level Shot Function
j Optical Image Stabilizer
j [SHOOTING GUIDE]
If you experience fatigue, a feeling of discomfort or other symptoms when playing back a scene
recorded with the Remote Pan Tilt Cradle, stop the playback.
(About [Party Scene]/[Moving Object])
Still pictures cannot be recorded during Motion picture recording.
Depending on recording conditions, the colour tone of the image being recorded may change or
subjects may not be recorded automatically in cases such as the following:
j The subject is too large or too small
HC-V550
HC-V530
- 212 -
j The background and the subject are similar in colour
j The recording location is dark
j Bright light is detected (sky, TV, lamp, etc.)
j The subject is moving too fast, or not moving
j The area being recorded is close to a window
Depending on recording conditions, scenes may not be recorded as intended. In such cases, we
recommend setting the mode to [Manual].
(About [Moving Object])
When recording starts, a moving subject will be detected. Before recording, point the camera at
the subject.
This unit cannot track more than one subject simultaneously.
Certain types of subjects, such as a fast moving subject, may not be tracked.
When the Remote Pan Tilt Cradle is connected to this unit, the Remote Pan Tilt Cradle setup menu
can be set.
Connecting the Remote Pan Tilt Cradle to this unit (l 209)
1 Touch [SETUP] in the Remote Pan Tilt Cradle Mode screen.
2 Touch desired menu item.
Set the left/right pan range of the Remote Pan Tilt Cradle for [Party Scene]/[Moving Object].
Set the up/down tilt range of the Remote Pan Tilt Cradle for [Party Scene]/[Moving Object].
Set the up/down operation speed of the Remote Pan Tilt Cradle.
Remote Pan Tilt Cradle settings
[Panning Angle]
[±180°]/[±90°]/[±45°]/[Stationary]
[±180°]: Pans to the left/right up to approx. 180 o.
[±90°]: Pans to the left/right up to approx. 90 o.
[±45°]: Pans to the left/right up to approx. 45 o.
[Stationary]: Panning to the left/right is off.
[Tilt Angle]
[±15°]/[Stationary]
[±15°]: Tilts up/down up to approx. 15 o.
[Stationary]: Tilting up/down is off.
[Tilt Speed]
[High]/[Normal]
- 213 -
You can confirm the operating range of the Remote Pan Tilt Cradle set for [Party Scene]/[Moving
Object].
The Remote Pan Tilt Cradle moves in the ranges set at [Panning Angle] and [Tilt Angle].
When the confirmation operation is finished, the Remote Pan Tilt Cradle returns to its home
position.
The firmware version of the Remote Pan Tilt Cradle is displayed.
You can update the firmware version of the Remote Pan Tilt Cradle.
Before updating this unit, update the Remote Pan Tilt Cradle.
If you update this unit first, the Remote Pan Tilt Cradle may become unusable.
You can watch the demonstration of how the Remote Pan Tilt Cradle will operate when [Party
Scene] is set.
Touch [Party Scene Demo], the demonstration automatically starts.
When you touch [EXIT], the demonstration will be cancelled.
You can watch the demonstration of how the Remote Pan Tilt Cradle will operate when [Moving
Object] is set.
Touch [Moving Object Demo], the demonstration automatically starts.
When you touch [EXIT], the demonstration will be cancelled.
[Pan/Tilt Check]
[Version Disp.]
[Version Up]
For the latest update information, check the support website below. (As of November
2013)
http://panasonic.jp/support/global/cs/e_cam
(This Site is English only)
[Party Scene Demo]
[Moving Object Demo]
Panasonic Corporation
Web site: http://panasonic.net
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic HC-V250 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic HC-V250 in de taal/talen: Engels als bijlage per email.

De handleiding is 10,61 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Panasonic HC-V250

Panasonic HC-V250 Gebruiksaanwijzing - Nederlands - 30 pagina's

Panasonic HC-V250 Installatiehandleiding - Nederlands - 1 pagina's

Panasonic HC-V250 Gebruiksaanwijzing - Nederlands - 214 pagina's

Panasonic HC-V250 Gebruiksaanwijzing - Deutsch - 28 pagina's

Panasonic HC-V250 Installatiehandleiding - Deutsch - 1 pagina's

Panasonic HC-V250 Gebruiksaanwijzing - Deutsch - 214 pagina's

Panasonic HC-V250 Installatiehandleiding - English - 1 pagina's

Panasonic HC-V250 Gebruiksaanwijzing - Français - 214 pagina's

Panasonic HC-V250 Snelstart handleiding - Français - 30 pagina's

Panasonic HC-V250 Installatiehandleiding - Français - 1 pagina's

Panasonic HC-V250 Gebruiksaanwijzing - Italiano - 214 pagina's

Panasonic HC-V250 Gebruiksaanwijzing - Italiano - 28 pagina's

Panasonic HC-V250 Installatiehandleiding - Italiano - 1 pagina's

Panasonic HC-V250 Gebruiksaanwijzing - Português - 214 pagina's

Panasonic HC-V250 Gebruiksaanwijzing - Português - 30 pagina's

Panasonic HC-V250 Installatiehandleiding - Português - 1 pagina's

Panasonic HC-V250 Installatiehandleiding - Espanõl - 1 pagina's

Panasonic HC-V250 Gebruiksaanwijzing - Espanõl - 214 pagina's

Panasonic HC-V250 Gebruiksaanwijzing - Espanõl - 30 pagina's

Panasonic HC-V250 Gebruiksaanwijzing - Polski - 214 pagina's

Panasonic HC-V250 Gebruiksaanwijzing - Polski - 28 pagina's

Panasonic HC-V250 Installatiehandleiding - Polski - 1 pagina's

Panasonic HC-V250 Gebruiksaanwijzing - Türkiye - 28 pagina's

Panasonic HC-V250 Installatiehandleiding - Türkiye - 1 pagina's

Panasonic HC-V250 Gebruiksaanwijzing - Dansk - 28 pagina's

Panasonic HC-V250 Installatiehandleiding - Dansk - 1 pagina's

Panasonic HC-V250 Gebruiksaanwijzing - Svenska - 28 pagina's

Panasonic HC-V250 Installatiehandleiding - Svenska - 1 pagina's

Panasonic HC-V250 Gebruiksaanwijzing - Suomi - 28 pagina's

Panasonic HC-V250 Installatiehandleiding - Suomi - 1 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info