734634
40
Verklein
Vergroot
Pagina terug
1/46
Pagina verder
- 40 -
Reference
[UB420] [UB330]
When using wireless LAN connection, video
from the Network Contents server* is not
played back or video frames are dropped
during playback.
h Higher transfer rate router such as 802.11n
(2.4 GHz or 5 GHz) or [UB420] 802.11ac
wireless router may solve the problem. If you
use 802.11n (2.4 GHz or 5 GHz) or [UB420]
802.11ac wireless router, it is necessary to set
the encryption type to “AES”.
Simultaneous use with a microwave, cordless
telephone etc. at 2.4 GHz may result in
connection interruptions or other problems.
h On the “Wireless Settingsscreen (> 33), the
continuous lighting of at least 4 “Reception”
indicators is the target for a stable connection.
If 3 or fewer indicators are lit or the
connection is being interrupted, change the
position or angle of your wireless router and
see if the connection state improves. If there
is no improvement, connect to a wired
network and perform the “Easy Network
Setting” (> 17) again.
* DLNA compatible server, etc.
Cannot read. Please check the disc.
h You inserted an incompatible disc.
Cannot play this file.
h You tried to play a non-compatible video.
No disc inserted.
h The disc may be upside down.
$ This operation cannot be performed now.
h Some operations are unsupported by the unit.
(For example, reverse slow motion, etc.)
IP address is not set.
h The “IP Address” in “IP Address / DNS
Settings” is “---. ---. ---. ---”. Set the “IP
Address”, “Subnet Mask”, and “Gateway
Address”. (Select the automatic address
acquisition if necessary.)
[UB420] [UB330]
The wireless access point currently has a low
network security setting. It is recommended to
change to a higher setting.
h Set a stronger network security level referring
to the wireless router operating instructions.
When the POWER LED is flashing other than
during power up or down of this unit, check the
message on the TV screen. If a message is not
displayed on the TV screen, determine the type of
the error by checking the way the POWER LED is
flashing.
(Flashes 6 times)
h The remote control and this unit are using
different codes.
Turn on this unit by using [Í/I] on the main
unit, and check “Remote Control ” which is
displayed on the screen when you press a
button on the remote control.
Press and hold [OK] and the displayed
number (“”) for at least 5 seconds.
(Flashes 4 times)
h The unit fails to operate properly. Press [Í/I]
on the main unit for 3 seconds to switch the
unit to standby, then switch back on.
(Flashes)
h The copyright protected disc cannot be
played back.
One of the devices connected to this unit (TV,
amplifier, etc.) does not support copyright
protection.
h Temperature of this unit is hot and the unit
switches to standby for safety reasons.
Wait for about 30 minutes.
Install or place this unit with good ventilation.
h A firmware update is in progress.
(Flashes 3 times)
h The disc in use cannot be played back since
the copyright information is invalid.
h A firmware update using a USB device is
complete.
Messages on the screen
POWER LED
Symbols indicate the following states:
Flash
No illumination
Repetition
40

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic DP-UB420 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic DP-UB420 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,85 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Panasonic DP-UB420

Panasonic DP-UB420 Gebruiksaanwijzing - Nederlands - 46 pagina's

Panasonic DP-UB420 Gebruiksaanwijzing - Deutsch - 46 pagina's

Panasonic DP-UB420 Gebruiksaanwijzing - Français - 46 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info