Handleiding Panasonic DP-UB330 (pagina 37 van 46) (Engels)

734635

Verklein

Vergroot

Pagina terug

1/46

Pagina verder

Operating Instructions

Blu-ray Disc

Player

Model No. DP-UB420

DP-UB330

DP-UB320

Thank you for purchasing this product.

Please read these instructions carefully before using this product, and save this manual for future use.

Unless otherwise indicated, illustrations in these operating instructions are of DP-UB420.

Firmware updates

Panasonic is constantly improving the unit’s firmware to ensure

that our customers are enjoying the latest technology.

Panasonic recommends updating your firmware as soon as you

are notified.

For details, refer to “Firmware updates” (> 18) or

https://panasonic.jp/support/global/cs/ (This site is in English only.)

until

2016/9/20

TQBS0172-2

- 2 -

Unit

To reduce the risk of fire, electric shock or product damage,

≥ Do not expose this unit to rain, moisture, dripping or

splashing.

≥ Do not place objects filled with liquids, such as vases, on

this unit.

≥ Use the recommended accessories.

≥ Do not remove covers.

≥ Do not repair this unit by yourself. Refer servicing to

qualified service personnel.

≥ Do not let metal objects fall inside this unit.

≥ Do not place heavy items on this unit.

AC mains lead

To reduce the risk of fire, electric shock or product damage,

≥ Ensure that the power supply voltage corresponds to the

voltage printed on this unit.

≥ Insert the mains plug fully into the socket outlet.

≥ Do not pull, bend, or place heavy items on the lead.

≥ Do not handle the plug with wet hands.

≥ Hold onto the mains plug body when disconnecting the

plug.

≥ Do not use a damaged mains plug or socket outlet.

The mains plug is the disconnecting device.

Install this unit so that the mains plug can be unplugged from

the socket outlet immediately.

Unit

≥ This unit utilizes a laser. Use of controls or adjustments or

performance of procedures other than those specified

herein may result in hazardous radiation exposure.

≥ Do not place sources of naked flames, such as lighted

candles, on this unit.

≥ This unit may receive radio interference caused by mobile

telephones during use. If such interference occurs, please

increase separation between this unit and the mobile

telephone.

≥ This unit is intended for use in moderate climates.

≥ Some portions of this unit may become hot during use.

When moving or cleaning this unit, disconnect the AC

mains lead and wait for 3 minutes or longer.

Placement

Place this unit on an even surface.

To reduce the risk of fire, electric shock or product damage,

≥ Do not install or place this unit in a bookcase, built-in

cabinet or in another confined space. Ensure this unit is

well ventilated.

≥ Do not obstruct this unit’s ventilation openings with

newspapers, tablecloths, curtains, and similar items.

≥ Do not place the unit on amplifiers/receivers or equipment

that may become hot. The heat can damage the unit.

≥ Do not expose this unit to direct sunlight, high

temperatures, high humidity, and excessive vibration.

Batteries

Mishandling of batteries can cause electrolyte leakage and

may cause a fire.

≥ Danger of explosion if battery is incorrectly replaced.

Replace only with the type recommended by the

manufacturer.

≥ When disposing of the batteries, please contact your local

authorities or dealer and ask for the correct method of

disposal.

≥ Do not mix old and new batteries or different types at the

same time.

≥ Do not heat or expose to flame.

≥ Do not leave the battery(ies) in a car exposed to direct

sunlight for a long period of time with doors and windows

closed.

≥ Do not take apart or short circuit.

≥ Do not recharge alkaline or manganese batteries.

≥ Do not use batteries if the covering has been peeled off.

Remove batteries if you do not intend to use the remote

control for a long period of time. Store in a cool, dark place.

This unit adopts the following technology for copyright protection.

Cinavia Notice

This product uses Cinavia technology to limit the use of

unauthorized copies of some commercially-produced film and

videos and their soundtracks. When a prohibited use of an

unauthorized copy is detected, a message will be displayed and

playback or copying will be interrupted.

More information about Cinavia technology is provided at the

Cinavia Online Consumer Information Center at

http://www.cinavia.com. To request additional information about

Cinavia by mail, send a postcard with your mailing address to:

Cinavia Consumer Information Center, P.O. Box 86851, San

Diego, CA, 92138, USA.

Precautions

WARNING

CAUTION

Restriction on use of

unauthorized copied content

- 3 -

≥ The operation history may be recorded in the memory of

this unit.

Disposal of Old Equipment and Batteries

Only for European Union and countries with

recycling systems

These symbols on the products, packaging, and/

or accompanying documents mean that used

electrical and electronic products and batteries

must not be mixed with general household waste.

For proper treatment, recovery and recycling of

old products and used batteries, please take them

to applicable collection points in accordance with

your national legislation.

By disposing of them correctly, you will help to

save valuable resources and prevent any potential

negative effects on human health and the

environment.

For more information about collection and

recycling, please contact your local municipality.

Penalties may be applicable for incorrect disposal

of this waste, in accordance with national

legislation.

Note for the battery symbol (bottom

symbol):

This symbol might be used in combination with a

chemical symbol. In this case it complies with the

requirement set by the Directive for the chemical

involved.

Declaration of Conformity (DoC)

Hereby, “Panasonic Corporation” declares that this product is

in compliance with the essential requirements and other

relevant provisions of Directive 2014/53/EU.

Customers can download a copy of the original DoC to our

RE products from our DoC server:

http://www.ptc.panasonic.eu

Contact to Authorised Representative:

Panasonic Marketing Europe GmbH, Panasonic Testing

Centre, Winsbergring 15, 22525 Hamburg, Germany

5.15 - 5.35 GHz band is restricted to indoor operations only in

the following countries.

To dispose or transfer this

unit

The unit may keep the user settings information in the unit. If

you discard this unit either by disposal or transfer, then follow

the procedure to return all the settings to the factory presets

to delete the user settings. (> 36, “To return all settings to the

factory preset.”)

[UB420] [UB330]

Wireless LAN connection

The following limits are in place regarding the usage of this

unit. You must be aware of these limits before using this unit.

Panasonic will in no way be responsible for any incidental

damage which may arise due to a failure to obey these limits,

or to any condition of use or disuse of this unit.

≥ Data transmitted and received over radio waves may be

intercepted and monitored.

≥ This unit contains delicate electronic components.

Please use this unit in the manner in which it was

intended and follow the following points:

– Do not expose this unit to high temperatures or direct

sunlight.

– Do not bend, or subject this unit to strong impacts.

– Keep this unit away from moisture.

– Do not disassemble or alter this unit in any way.

Type of wireless Frequency band

Maximum power

(dBm e.i.r.p.)

WLAN

2412-2472 MHz

5180-5320 MHz

5500-5700 MHz

20 dBm

23 dBm

- 4 -

Table of contents

Precautions . . . . . . . . . . . . . . . . . 2

Getting started

Accessories . . . . . . . . . . . . . . . . . 5

Unit and media care . . . . . . . . . . . 5

Playable media. . . . . . . . . . . . . . . 6

Control reference guide . . . . . . . . 8

Connecting to a TV . . . . . . . . . . 10

Connecting to

an amplifier/receiver . . . . . . . . . 11

Connecting to the network . . . . . 16

Settings . . . . . . . . . . . . . . . . . . . 17

Playback

HOME menu . . . . . . . . . . . . . . . 19

Playback. . . . . . . . . . . . . . . . . . . 19

Enjoying Network Service . . . . . 22

Home Network feature . . . . . . . . 23

VIERA Link. . . . . . . . . . . . . . . . . 25

Option menu. . . . . . . . . . . . . . . . 26

Reference

Setup menu . . . . . . . . . . . . . . . . 29

Troubleshooting guide . . . . . . . . 36

Specifications . . . . . . . . . . . . . . . 41

Licenses . . . . . . . . . . . . . . . . . . . 44

To enjoy Ultra HD Blu-ray Disc featured with

High Dynamic Range (HDR)

If you see a message about High Dynamic

Range (HDR) compatible issue while an Ultra

HD Blu-ray Disc is played back, please check

your TV settings as follows.

An example of the message:

“This player is not connected to a High Dynamic

Range (HDR) compatible TV.”

1) When you use a Panasonic TV that is

compatible with 4K/High Dynamic Range (HDR)

and was released in 2015 or later, enable the

HDR setting of the TV. (This setting may not be

available depending on the TV. Refer to the

operating instructions of the TV for details.)

2) If you use a TV not from Panasonic,

compatible with 4K and High Dynamic Range

(HDR), please refer to the operating instructions

of the TV.

3) When you play a High Dynamic Range (HDR)

disc on a TV without High Dynamic Range

(HDR) capability, the disc can be played back

(in non-HDR quality) even if the message

appears.

[UB420]

Voice Control

For details, refer to

https://panasonic.jp/support/global/cs/

Getting started

- 5 -

Getting started

Accessories

Check the supplied accessories before using this

unit.



≥ Product numbers are provided in these operating

instructions correct as of February 2018.

These may be subject to change.

≥ Do not use AC mains lead with other equipment.

∫ Using the remote control

Insert the batteries to the terminal so that it (i

and j) matches those in the remote control.

Unit and media care

∫ Clean this unit with a soft, dry

cloth

≥ Never use alcohol, paint thinner or benzine to

clean this unit.

≥ Before using chemically treated cloth, carefully

read the instructions that came with the cloth.

∫ This unit’s lens

Use the lens cleaner (not supplied) to clean the

unit’s lens.

∫ Clean discs

Wipe with a damp cloth and then wipe dry with a

dry cloth.

∫ Disc handling precautions

≥ Handle discs by the edges to avoid inadvertent

scratches or fingerprints on the disc.

≥ Do not attach labels or stickers to discs.

≥ Do not use disc cleaning sprays, benzine,

thinner, static electricity prevention liquids or

any other solvent.

≥ Do not use the following discs:

– Discs with exposed adhesive from removed

stickers or labels (rented discs, etc.).

– Discs that are badly warped or cracked.

– Irregularly shaped discs, such as heart

shapes.

1 Remote control

(N2QAYB001185)

2 Batteries for remote control

1 AC mains lead

Point it at the remote control signal sensor on this

unit. (> 9)



R6/LR6, AA



(Alkaline or manganese batteries)

DO NOT

Getting started

- 6 -

Playable media

Device Media markings Device types Contents format

Ultra HD Blu-ray*

Video

BD-Video Video

BD-RE

BD-RE DL

Video,

JPEG, MPO

BD-R

BD-R DL

Video, MKV,

JPEG, MPO

DVD-Video Video

DVD-R

Video, AVCHD, MKV,

JPEG, MPO,

AAC, AIFF, ALAC,

DSD (DFF, DSF),

FLAC, MP3, WAV,

WMA

DVD-R DL

DVD-RW

Video, AVCHD

— +R/+RW/+R DL

Music CD Music [CD-DA]

—

CD-R

CD-RW

MKV,

JPEG, MPO,

AAC, AIFF, ALAC,

FLAC, MP3,

Music [CD-DA], WAV,

WMA

—

USB devices

(up to 4 TB)

AVCHD, AVCHD 3D,

MKV, MP4, MPEG2,

JPEG, MPO,

AAC, AIFF, ALAC,

DSD (DFF, DSF),

FLAC, MP3, WAV,

WMA

≥ See pages 7 and 41 for more information on the types of content that can be played.

See “Enjoying Ultra HD Blu-ray” (> 21)

Unless otherwise indicated, BD-Video content includes Ultra HD Blu-ray content in these operating instructions.

DVD

USB

Getting started

- 7 -

∫ Types of discs that cannot be

played by this unit

Any other disc that is not specifically

supported or previously described.

∫ Region management information

∫ Finalize

Any DVD-R/RW/R DL, +R/+RW/+R DL and

CD-R/RW that are recorded by a recorder need to

be finalized by the recorder to play on this unit.

Please refer to the recorder’s instructions.

∫ BD-Video

This unit supports high bit rate audio (Dolby

Digital Plus, Dolby

TrueHD, DTS-HD High

Resolution Audio

and DTS-HD Master Audio

)

adopted in BD-Video.

∫ 3D

3D videos and 3D still pictures can be played

back when this unit is connected to a 3D

compatible TV using a High Speed HDMI Cable.

∫ Music CD

Operation and sound quality of CDs that do not

comply with CD-DA specifications (copy control

CDs, etc.) cannot be guaranteed to work.

∫ USB device

≥ Connect a USB device while the Home screen

is displayed.

≥ This unit does not guarantee connection with all

USB devices.

≥ This unit does not support USB device

charging.

≥ FAT12, FAT16, FAT32, and NTFS file systems

are supported.

≥ The USB port on the front of the unit supports

USB 2.0 High Speed [UB420] and the USB port

on the rear of the unit supports USB 3.0

Super-Speed.

≥ [UB420] The USB port on the rear of the unit

supports an HDD formatted in FAT32 and

NTFS. If the HDD is not recognized, the power

to the HDD may not be supplied. Supply power

from an external source.

≥ [UB330] [UB320] This unit supports an HDD

formatted in FAT32 and NTFS. If the HDD is not

recognized, the power to the HDD may not be

supplied. Supply power from an external

source.

≥ [UB420] It is not possible to use two USB

devices simultaneously. (> 37)

≥ [UB420] For playback of 4K videos stored on a

USB device, use USB 3.0 port on rear of the

unit and USB device conforming to USB 3.0.

∫ BD-RE, BD-R

This unit may not correctly play back the audio

portion of a video recorded to a disc in multiple

languages with a Blu-ray disc recorder.



≥ It may not be possible to play the above media in some

cases due to the type of media, the condition of the

recording, the recording method, and how the files were

created.

≥ The producers of the disc can control how discs are

played, so you may not always be able to control play as

described in these operating instructions. Read the disc’s

instructions carefully.

≥ DVD-RAM

≥ Super Audio CD

≥ Photo CD

≥ DVD-Audio

≥ Video CD and Super Video CD

≥ HD DVD

The unit can play back BD-Video/DVD-Video

discs of the following regions codes, including

“ALL”:

Example: BD-Video DVD-Video

Getting started

- 8 -

Control reference guide

∫ Remote control

When other Panasonic devices respond to the

remote control of the unit, change the remote

control code. (> 35)

1 Turn the unit on and off

2 TV operation buttons

You can operate the Panasonic TV using this

unit’s remote control. Some buttons may not

work depending on the TV.

3 Select title numbers, etc./Enter numbers or

characters

4 Cancel

Clear the currently selected character.

(when entering a password for “Ratings” in

the Setup menu, for example)

5 Change soundtrack (> 20)

6 Basic playback control buttons (> 19)

7 Show Pop-up menu (> 20)

8 Show Top menu (> 20)

9 Show Option menu (> 26)

10 Coloured buttons (red, green, yellow, blue)

Used for various purposes depending on the

screen

11 Transmit the remote control signal

12 Open or close the disc tray (> 9)

13 Show the status messages (> 20)

14 Show “Playback Information Window” (> 20)

15 Show the Home screen of the Network

Service (> 22)

16 Show “HDR Setting” (> 20)

17 Show NETFLIX screen (> 22)

18 Show HOME menu (> 19)

19 [3, 4, 2, 1] : Move the highlight for

selection

[OK] : Confirm the selection

(2;)(;1) : Frame-by-frame (> 20)

20 Return to previous screen

Getting started

- 9 -

∫ Front

1 Disc tray

2 USB port ( DC 5 V 500 mA)

This port supports USB 2.0 High Speed.

3 Remote control signal sensor

Distance: Within approx. 7 m

Angle: Approx. 20e up and down, 30e left and

right

4 POWER LED

When the unit is turned on, the LED flashes

first, and then lights up.

If the LED keeps flashing, there may be an

error. (> 40)

5 Open or close the disc tray

6 Standby/on switch (Í/I) (> 17)

Press to switch the unit from on to standby

mode or vice versa. In standby mode, the unit

is still consuming a small amount of power.

∫ Rear

1 AC IN ( ) terminal (> 10)

2 Cooling fan

3 [UB420] HDMI AUDIO OUT terminal (> 11)

4 [UB420] HDMI VIDEO OUT terminal (> 10)

5 [UB330] [UB320] HDMI AV OUT terminal

(> 10)

6 LAN port (> 16)

7 [UB420] USB port (HDD) ( DC 5 V 900 mA)

This port supports USB 3.0 Super-Speed.

8 [UB420] DIGITAL AUDIO OUT terminal

(OPTICAL terminal) (> 12)

3 42

[UB420]

Pull to flip down

the front panel.

[UB330] [UB320]

There is no front

panel.

CAUTION

Do not place objects in front of the unit. The disc tray may collide with objects when it is opened, and

this may cause malfunction.



≥ When inserting a media item, ensure that it is facing the correct way, which is the right side facing up.

≥ If you connect a Panasonic product with a USB connection cable, the setup screen may be displayed on the connected

equipment. For details, refer to the instructions for the connected equipment.

31 82 46 7

[UB330] [UB320]

Class II equipment (The construction of the product is

double-insulated.)

Getting started

- 10 -

Connecting to a TV

4K images can be played back when this unit is connected to 4K compatible TV.

≥ Before making any connections, please disconnect all the units from AC power.

(Connect the AC mains lead after making all connections.)

≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.

≥ This unit consumes a small amount of AC power (> 41) even when turned off in standby mode. For

the purpose of energy conservation, the unit should be disconnected if you will not be using it for

extended period of time.

∫ Enjoying 4K output

≥ To enjoy images in 4K (50p/60p), you need an HDMI cable that supports 18 Gbps.

When outputting 1080p or 24p (4K) signal, please use HDMI cables 5.0 meters or less.

It is recommended that you use Panasonic’s HDMI cable.

≥ If you connect this unit to a 4K-compatible TV and perform “Easy Settings”, 4K (50p/60p) will

be automatically selected. (> 17, 34)

≥ To view Ultra HD Blu-ray content in 4K/HDR format, connect to the HDMI terminal of a device that

supports HDCP2.2, 4K (50p/60p) 4:4:4, and HDR signals that meet Ultra HD Blu-ray standards.

Enjoying video and audio with a 4K-compatible TV

HDMI IN

To a household

mains socket

AC mains lead

(supplied)

HDMI cable

(18 Gbps)

[UB330]

[UB320]

[UB420]

Setting

Set the following items in the setup menu (> 29):

≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (> 29)

≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)

Getting started

- 11 -

Connecting to an amplifier/receiver

[UB420] Enjoying video with a 4K-compatible TV and audio with an amplifier

You can enjoy richer sound by using the HDMI AUDIO OUT terminal.

(Audio is output in high resolution.)

Setting

Set the following items in the setup menu (> 29):

≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (> 29)

≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)

≥ To enjoy audio with a TV

Set “HDMI(VIDEO) Output Mode” to “Video+Audio”. (> 29)



≥ The HDMI AUDIO OUT terminal is not compatible with 4K output and the VIERA Link (> 25).

Enjoying video with a 4K-compatible TV and audio with a 4K-compatible amplifier

HDMI INHDMI IN

HDMI cable

(18 Gbps)

HDMI cable

Amplifier/receiver

[UB420]

Setting

Set the following items in the setup menu (> 29):

≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (> 29)

≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)



≥ About ARC:

When using the TV or amplifier/receiver that does not have the indication of “(ARC)” (non-ARC-compatible) on the HDMI

terminal, the amplifier/receiver and TV must also be connected using an optical digital cable or coaxial cable in order to

enjoy the TV’s sound through the amplifier/receiver.

HDMI IN

(ARC)

HDMI OUT

(ARC)

HDMI IN

Amplifier/receiver

(4K-compatible)

HDMI cable

(18 Gbps)

HDMI cable

(18 Gbps)

[UB330]

[UB320]

Getting started

- 12 -

3D or 4K images can be played back when this unit is connected to a 3D or 4K compatible TV.

≥ This connection only supports up to 5.1ch.

≥ To connect a TV and amplifier with an HDMI cable, connecting terminals on both the TV and amplifier

must be ARC-compatible. (> 11, “About ARC”)

[UB420] Enjoying audio with an amplifier connected to the OPTICAL terminal

Setting

Set the following items in the setup menu (> 29):

≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (> 29)

≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)

≥ To enjoy audio with an amplifier connected to the OPTICAL terminal

Set “Audio Output” to “Off” in “Advanced Settings”. (> 30)

Connecting an amplifier to a 4K-compatible TV

[UB420]

Setting

Set the following items in the setup menu (> 29):

≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (> 29)

≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)

OPTICAL IN

Optical digital cable

Amplifier/receiver

HDMI OUT

(ARC)

HDMI IN

(ARC)

HDMI IN

Amplifier/receiver

HDMI cable

(18 Gbps)

[UB330]

[UB320]

Getting started

- 13 -

[UB420] Enjoying video with a 4K-compatible TV in combination with an amplifier connected to

the HDMI AUDIO OUT terminal and another amplifier connected to the OPTICAL terminal

Setting

Set the following items in the setup menu (> 29):

≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (> 29)

≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)

≥ To enjoy audio with an amplifier connected to the OPTICAL terminal

Set “Audio Output” to “Off” in “Advanced Settings”. (> 30)

≥ To enjoy audio with a TV

Set “HDMI(VIDEO) Output Mode” to “Video+Audio”. (> 29)



≥ It is not possible to simultaneously output audio from both the amplifier connected to the HDMI AUDIO OUT terminal and the

other amplifier connected to the OPTICAL terminal.

OPTICAL IN

HDMI INHDMI IN

HDMI cable HDMI cable

(18 Gbps)

Amplifier/receiver

Optical digital cable

Getting started

- 14 -

[UB420] Enjoying video with a 4K-compatible TV in combination with a 2K-compatible projector

and an amplifier that is connected to the OPTICAL terminal

HDMI INHDMI IN

OPTICAL IN

HDMI cable

(18 Gbps)

Projector

(2K-compatible)

Amplifier/receiver

Optical digital cable

Setting

Set the following items in the setup menu (> 29):

≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (> 29)

≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)

≥ To enjoy audio with an amplifier connected to the OPTICAL terminal

Set “Audio Output” to “Off” in “Advanced Settings”. (> 30)

≥ To enjoy audio with a TV

Set “HDMI(VIDEO) Output Mode” to “Video+Audio”. (> 29)

Set “Audio Output” to “On” in “Advanced Settings”. (> 30)

≥ To enjoy video with a projector

Set “HDMI(AUDIO) Output Mode” to “Video+Audio”. (> 29)

(It is not possible to output 3D, 4K or HDR content from the HDMI AUDIO OUT/HDMI VIDEO OUT

terminal when “Video+Audio” is selected.)

Getting started

- 15 -

[UB420] Enjoying video with a 4K-compatible TV in combination with a 2K-compatible projector

and an amplifier that is connected to the HDMI AUDIO OUT terminal and another amplifier that

is connected to the OPTICAL terminal

Setting

Set the following items in the setup menu (> 29):

≥ Set “HDMI(VIDEO) Output Mode” to “Automatic ( Video Only / Video+Audio )”. (> 29)

≥ Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (> 29)

≥ To enjoy audio with an amplifier connected to the OPTICAL terminal

Set “Audio Output” to “Off” in “Advanced Settings”. (> 30)

≥ To enjoy audio with a TV

Set “HDMI(VIDEO) Output Mode” to “Video+Audio”. (> 29)

≥ To enjoy video with a projector

Set “HDMI(AUDIO) Output Mode” to “Video+Audio”. (> 29)

(It is not possible to output 3D, 4K or HDR content from the HDMI AUDIO OUT/HDMI VIDEO OUT

terminal when “Video+Audio” is selected.)



≥ It is not possible to simultaneously output audio from both the amplifier connected to the HDMI AUDIO OUT terminal and the

other amplifier connected to the OPTICAL terminal.

OPTICAL IN

HDMI INHDMI IN

HDMI IN

HDMI OUT

HDMI cable HDMI cable

(18 Gbps)

Amplifier/receiver

HDMI cable

Projector

(2K-compatible)

Amplifier/receiver

Optical digital cable

Getting started

- 16 -

Connecting to the network

The following services can be used when this unit is connected to broadband.

For details about connection method, refer to the instructions supplied with the connected equipment.

≥ See page 3 for the precautions of wireless LAN connection.

≥ Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.

≥ Inserting any cable other than a LAN cable in the LAN port can damage the unit.

≥ Firmware can be updated (> 18)

≥ You can enjoy BD-Live/Network Service (> 21, 22)

≥ You can access other devices (Home Network) (> 23)

≥ [UB420] [UB330] This unit supports Direct Access and can make a wireless connection to wireless

devices without router. You can use this function when enjoying Home Network feature, etc. Internet

access is not available while connected via Direct Access. (> 24)

[UB420] [UB330]

Wireless LAN connection

This unit has built-in wireless LAN and can be connected to a wireless router.

≥ The unit is not compatible with public wireless LAN services.

Wireless router, etc.

Internet

LAN cable connection

Broadband router, etc.

Internet

LAN Cable

[UB330]

[UB320]

Getting started

- 17 -

After connecting your new player for the first time

and pressing [Í], the basic settings screen will

appear.

Preparation

Turn on the TV and select the appropriate

video input.

1 Press [Í].

Setup screen appears.

2 Follow the on-screen instructions to

continue with the settings.

(e.g., “Quick Start”)

≥ Certain recent models of Panasonic TVs

(VIERA) may automatically apply their

language setting to this unit.

Follow the on-screen instructions to set the

format.



≥ To reconnect this unit to a 4K (50p or 60p)-compatible TV

after connecting this unit to a 2K-compatible TV and

completing “Easy Settings”, set “4K(50p/60p) Output” to

“4K(50p/60p) 4:4:4” or “4K(50p/60p) 4:2:0”. (> 29)

Settings

The following settings can be performed anytime

in the Setup menu. (> 33, 34)

Easy Settings

∫ When connected to a 4K (50p or

60p)-compatible TV

When connected to a 4K (50p or 60p)-compatible

TV, you can set the video output format.

4K(50p/60p) Output

Start

Start connection check with your 4K TV.

Once connection check is started and if the video is not displayed

correctly, please wait for the next display. The connection check

could take up to 30 seconds to display the new message screen.

RETURN

Easy Network Setting

After completing “Easy Settings”, you can perform

“Easy Network Setting”.

e.g., [UB420] [UB330]

Select “Wired” or “Wireless” and press [OK].

∫ “Wired” connection

Follow the on-screen instructions to apply your

connection settings.

∫ “Wireless” connection

Preparation

Before beginning wireless connection setup

≥ Obtain your network name (SSID*

≥ If your wireless connection is encrypted,

please be sure that you know your

encryption key.

Then follow the on-screen instructions and

apply the settings.

PUSH button method*

If the wireless router supports

the PUSH button method*

you can connect to and

configure the security settings

of your wireless LAN device

with ease by pressing the Link button on the

router.

1 Press the green button on the remote

control.

2 Press Link button or corresponding button

of the wireless router until the lamp starts

flashing.

≥ For details, refer to the operating

instruction of the wireless router.

3 Select “Start”.

Easy Network Setting

Wired

Wireless

Select a connection mode.

RETURN

e.g.

Link button

Getting started

- 18 -



≥ Refer to the operating instructions of the hub or router.

≥ [UB420] [UB330] Do not use this unit to connect to any

wireless network for which you do not have usage rights.

Using these networks may be regarded as illegal

access.

≥ If you have trouble getting online on your PC after

performing network settings on this unit, perform the

network settings on your PC.

≥ [UB420] [UB330] Please be aware that connecting to a

network without encryption may result in the leaking of data

such as personal or secret information.

An SSID (Service Set IDentification) is a name used by

wireless LAN to identify a particular network. Transmission

is possible if the SSID matches for both devices.

The PUSH button method is a connection method which

allows you to set encryption for a wireless LAN connection

with ease.

You can connect to a wireless LAN network by pressing a

certain button on the wireless access point [Link button,

WPS (Wi-Fi Protected Setup

) button, etc.].

This unit is capable of checking the firmware

automatically when connected to the Internet via

a broadband connection.*

When a new firmware version is available, the

following message is displayed.

Select “Yes” to start downloading the firmware.

When the firmware update starts after the

downloading is finished, a black screen is

displayed and the POWER LED flashes rapidly.

You cannot operate the unit until the update is

complete. Don’t remove the AC mains lead during

the update. Removing the AC mains lead while

the update is in progress may damage the unit.

After the firmware is installed, unit will restart and

the following screen will be displayed.



≥ You can also download the latest firmware from the

following website and store it to a USB device to

update the firmware.

https://panasonic.jp/support/global/cs/

(This site is in English only.)

When the update is complete the POWER LED will stop

rapid flashings and start flashing in a repeating pattern of

three flashes. Turn off and on the unit. (> 40)

≥ To show the firmware version on this unit. (> 35,

“Firmware Version Information”)

≥ Downloading will require several minutes. It may take

longer or may not work properly depending on the

connection environment.

You must agree to the terms of use for the Internet function

and the privacy policy. (> 34, “Legal Notices”)

“X.XX” represents the firmware version number.

Search for wireless network:

≥ The available wireless networks will be

displayed on the screen.

Select your network name.

– If your network name is not displayed,

search again by pressing the red button on

the remote control.

– Stealth SSID will not be displayed when

you press the red button on the remote

control.

Enter manually by using “Manual setting”.

(> 33)

≥ If your wireless network is encrypted,

Encryption Key input screen will be

displayed.

Input the encryption key of your network.

Firmware updates

Firmware Update

Current Installed Version: X.XX

New Version: X.XX

Do you want to start firmware update?

For the update information, please visit the

following website:

http://panasonic.net/support/

NoYes

RETURN

The firmware has been updated.

Current Version

: x.xx

- 19 -

Playback

HOME menu

Major functions of this unit can be operated from

the HOME menu.

Preparation

Turn on the TV and select the appropriate video

input.

1 Press [Í] to turn on the unit.

2 Press [OK] or [2, 1] to select the item.

≥ Press [OK] or [3, 4] to select the item if

necessary.

To show the HOME menu

Press [HOME].



≥ Items to be displayed may vary with the media.

Playback

1 Insert the media.

Playback starts depending on the media.

2 Select the item to play and press [OK].

Repeat this step if necessary.



≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE

DISPLAYED. Press [∫STOP] when you have finished

playback to protect the unit’s motor, your TV screen and so

on.

≥ When the following conditions are met, still pictures are

played back in 4K regardless of the image quality.

– The unit is connected to a 4K compatible TV

– “Video Format” is set to “Automatic” or “4K” (> 29)

≥ This unit can not output 4K images when playing back in

3D.

≥ It is not possible to play back AVCHD and MPEG2 videos

which have been dragged and dropped or copied and

pasted to the media.

≥ To enjoy BD-Video that supports Dolby Atmos

or DTS:X

(> 31)

≥ [UB420] If you press the blue button while displaying the

playback screen of an album or similar group of songs

containing a sound source recorded at a live performance

or concert (a music file containing songs that are recorded

continuously)*, you can perform seamless playback

without gaps between songs from the beginning of the

selected folder or track. (Gapless Playback) (> 39)

* AIFF, DSD (DFF), FLAC, WAV

Some operations may not work depending on the

media and contents.

Press [∫STOP].

The stopping point is memorized.

Resume play function

Press [1PLAY] to restart from this point.

≥ The point is cleared if the media is removed.

≥ On BD-Video discs including BD-J, the

resume play function does not work.

Press [;PAUSE].

≥ Press [;PAUSE] again or [1PLAY] to restart

play.

While playing, press [SEARCH6] or

[SEARCH5].

≥ Ultra HD Blu-ray, MKV, MP4 and MPEG2:

Audio is not heard.

Videos/Music/Photos

Disc

Play back the contents.

(> right)

≥ When multiple contents

are recorded, select the

types of contents or the

title.

≥ See “Playable media”

(> 6)

USB

Home Network

Network Contents

Playback

(> 24)

[UB420]

Mirroring

(> 23)

Media Renderer

(> 24)

Network Service

Displays the Home screen of Network Service.

(> 22)

Setup

Player Settings

(> 29)

Wallpaper

Changes the background

of HOME menu.

BD-Video Data

Erase

(> 21)

Operations during playback

Stop

Pause

Search/Slow motion

- 20 -

Playback

Slow motion

While paused, press [SEARCH6] or

[SEARCH5].

≥ BD-Video and AVCHD: [SEARCH5] only.

≥ MKV, MP4 and MPEG2: Not effective.

The speed increases up to 5 steps.

≥ Music, MP3, etc.: The speed is fixed to a single

step.

≥ Press [1PLAY] to revert to normal playback

speed.

While playing or paused, press [:] or

[9].

Skip to the title, chapter or track.

While paused, press [2] (2;) or [1] (;1).

≥ Each press shows the next frame.

≥ Press and hold to change in succession forward

or backward.

≥ Press [1PLAY] to revert to normal playback

speed.

≥ BD-Video and AVCHD: Forward only.

≥ MKV, MP4 and MPEG2: Not effective.

Press [AUDIO].

You can change the audio channel number or

soundtrack language, etc.

Press [TOP MENU] or [POP-UP MENU].

Select the item and press [OK].

While playing HDR video, press [HDR

SETTING].

When HDR (High Dynamic Range) video is output to

a connected HDR-compatible TV, a menu is

displayed, allowing you to adjust the brightness of

the entire screen.

(> 4, 27)

Press [

2, 1]

to adjust

the setting.

Press [RETURN] to exit.

You can select tracks on music CDs using the

number buttons on the remote control.

Press to while the list of tracks is

displayed to enter the 2-digit track number.

e.g., 5: [0]l[5], 15: [1]l[5]

While playing, press [PLAYBACK INFO.].

You can check the detailed video content*

playback status.

Press [RETURN] to exit.

* BD-Video, DVD-Video, MKV, MP4, MPEG2 (except

Network Contents)

While playing, press [STATUS].

The status messages give you information about

what is currently being played. Each time you

press [STATUS], the display information may

change or disappear from the screen.

≥ Depending on media and contents, the display

may change or not appear.

e.g., Ultra HD Blu-ray

A Displayed when an HDR (High Dynamic

Range) video signal is being output.

– “HDR (High Dynamic Range: HLG to PQ

Conversion)” : The format of the HDR video

is converted from HLG to PQ

– “Dynamic Range Conversion Output” : The

video signal is converted to SDR (Standard

Dynamic Range)

T: Title, P: Programme, C: Chapter, PL: Playlist

C Elapsed time in the title

D Method of HDR (High Dynamic Range) video

E Output resolution/Frame rate

F Current position

G Total time

Skip

Frame-by-frame

Changing soundtrack

Show top menu/pop-up menu

Adjust the screen brightness

[UB420]

Direct playback of music CDs

Show the status messages

Video attribute information of

video content*

Audio attribute information of

video content*

[UB420]

HDMI(VIDEO) output

information

[UB420]

HDMI(AUDIO) output

information

[UB330] [UB320]

HDMI output information

Play

Ultra HD Blu-ray

T1 C1

D E

ラュンドヱヲナ

ヰㄖㄕㄑㄖㄕホフレバビフㄑ

HDR (High Dynamic Range)

Date 11.12.2010

Size 500 x 375

Manufacturer

Equipment

No.

e.g., JPEG

- 21 -

Playback

You can enjoy the playback of Ultra HD Blu-ray

discs with this unit.

Preparation

≥ For 4K/HDR viewing, connect to a device and

terminals that support HDCP2.2*

, 4K (50p/60p)

4:4:4 and HDR signals that meet Ultra HD

Blu-ray standards. (> 10)

Due to copyright restrictions, it may not be

possible to play back certain discs unless this

unit is connected to the Internet.



≥ When connected to a device or terminal that does not

support HDCP2.2*

, this unit applies Dynamic Range

Conversion*

to HDR signals to output them in 2K

resolution. In addition, depending on the disc, it may not be

possible to perform playback correctly.

≥ When connected to a device or terminal that supports 4K

(50p/60p) 4:2:0 (8 bit) and lower, this unit plays back 50p/

60p content by applying Dynamic Range Conversion*

its HDR signals to output them.

≥ When connected to a device or terminal that does not

support 4K resolution, this unit applies Dynamic Range

Conversion*

to HDR signals to output them in 2K

resolution.

≥ When connected to a device or terminal that does not

support HDR, this unit applies Dynamic Range

Conversion*

to HDR signals to output them. In addition,

depending on the disc, it may not be possible to output

content in 2K resolution or perform playback correctly.

HDCP is a technology designed to prevent illegal copying.

“2.2” represents a version.

Dynamic Range Conversion is a function that converts

HDR video signals into video signals suited to TVs that do

not support HDR input.

Preparation

Connect this unit to a 3D compatible TV. (> 10)

≥ Perform the necessary preparations for the TV.

≥ Play back following the instructions displayed

on the screen.

≥ 3D Settings (> 28, 32)



≥ Please refrain from viewing 3D images if you do not feel

well or are experiencing visual fatigue.

In the event that you experience dizziness, nausea, or

other discomfort while viewing 3D images, discontinue use

and rest your eyes.

≥ 3D video might not output the way it is set in “Video

Format” and “24p Output” (> 29).

≥ When playing back 3D photos from “Photos” screen, select

from the “3D” list. (Still pictures in “2D” are played back in

2D.)

If “2D” and “3D” indications are not displayed, press the

red button on the remote control to switch the view of

playback contents.

With “BD-Live” discs, you can enjoy bonus

contents that use Internet access.

For this BD-Live function, connection of a USB

device is necessary along with Internet

connection.

1 Perform network connection and settings.

(> 16, 17)

2 Connect a USB device with 1 GB or more

free space.

≥ The USB device is used as the local

storage.

3 Insert the disc.

∫ Deleting data on the USB device

Select “BD-Video Data Erase” in the HOME

menu (> 19) and press [OK].



≥ The usable functions and the operating method may vary

with each disc, please refer to the instructions on the disc

and/or visit their website.

≥ “BD-Live Internet Access” may need to be changed for

certain discs. (> 34)

Enjoying Ultra HD Blu-ray Enjoying 3D video and photos

Enjoying BD-Live

- 22 -

Playback

Play a slideshow of photos and adjust various

settings during the playback.

1 Insert the media.

2 Select “View Photos”.

3 Select an item and press the green button.

The following items can be set.



≥ Still pictures displayed as “ ” cannot be displayed as

thumbnail with this unit.

≥ You cannot play back AAC and ALAC as background

music.

Enjoying Network

Service

Network Service allows you to access some

specific websites supported by Panasonic, and

enjoy Internet contents such as photos, videos,

etc. from Network Service home screen.

* Images are for illustration purposes, contents may change

without notice.

Preparation

≥ Network connection (> 16)

≥ Network setting (> 17)

– You must agree to the terms of use for the Internet

function and the privacy policy. (> 34, “Legal Notices”)

1 Press [INTERNET].

2 Select the item and press [OK].

To exit from Network Service

Press [HOME].

Slideshow

Start

Slideshow

Start the slideshow.

You can display still pictures in

the selected folder one by one

at a constant interval.

Interval Change the display interval.

Transition

Effect

Select the effect when sliding

pictures.

Repeat Play

Set whether to repeat the

slideshow.

Soundtrack

Set whether to play

background music.

≥ FLAC and MP3, etc., on the

USB device can be played

back during the slideshow of

JPEG on the USB device.

Soundtrack

Folder

Select the folder from which

the music files are played.

Shuffle BGM

Background music is played in

random order.

≥ Netflix can be accessed directly by

pressing [NETFLIX] button even when this

unit is off.

BACK

- 23 -

Playback



≥ In the following cases, settings are possible using the

Setup menu items.

– When restricting the use of Network Service

(> 34, “Network Service Lock”)

– When the audio is distorted

(> 33, “Audio Auto Gain Control”)

– When wrong time is displayed

(> 33, “Time Zone”, “Summer Time”)

≥ When using a slow Internet connection, the video may not

be displayed correctly. A high speed Internet service with a

speed of at least 6 Mbps is recommended.

≥ Be sure to update the firmware as soon as a firmware

update notice is displayed on the screen. If the firmware is

not updated, you may not be able to use Network Service

function properly. (> 18)

≥ Network Service Home Screen is subject to change

without notice.

≥ The services through Network Service are operated by

their respective service providers, and service may be

discontinued either temporarily or permanently without

notice. Therefore, Panasonic will make no warranty for the

content or the continuity of the services.

≥ Some features of websites or content of the service may

not be available.

≥ Some content may be inappropriate for viewers.

≥ Some content may only be available for specific countries

and may be presented in specific languages.

Home Network feature

Before using the following features, be sure to

configure the connected equipment on your

Home Network.

Mirroring is a function which displays a

smartphone or tablet’s screen on a TV via this

unit.

Enjoy the content shown on a

Miracast

-compatible smartphone or similar

device on your large TV screen.

≥ A device that supports the Mirroring function

and Android

ver. 4.2 or higher is required.

For information on whether the smartphone,

etc. supports Mirroring, contact the

manufacturer of the device.

1 Press [HOME].

2 Select “Home Network” and press [OK].

3 Select “Mirroring” and press [OK].

4 Operate the Mirroring compatible device.

≥ On the device, enable Mirroring and select

this unit (DP-UB420/424) as the device to

be connected.

For details, refer to the instructions supplied

with the device.

To exit from Mirroring

Press [HOME].

[UB420]

Using Mirroring

Player

Mirroring compatible

device

- 24 -

Playback

You can share photos, videos and music stored in

the Network Contents server*

[PC, smartphone,

recorders, etc.] connected to your home network.

≥ About support format of Network Contents

(> 43)

≥ When this unit is connected to a Panasonic

recorder with a server function, register this unit

to the recorder.

1 Press [HOME].

2 Select “Home Network” and press [OK].

3 Select “Network Contents Playback” and

press [OK].

≥ The list can be updated by pressing the

green button on the remote control.

≥ The selected equipment can be deleted

from the list by pressing the red button on

the remote control.

≥ [UB420] [UB330] The connection method can

be switched to Direct Access*

by pressing

the yellow button on the remote control.

4 Select the equipment and press [OK].

5 Select the item to play and press [OK].

≥ You may be able to use convenient

functions depending on the content by

pressing [OPTION].

To exit from Network Contents Playback

screen

Press [HOME].

You can use a smartphone or tablet as the Digital

Media Controller (DMC) to playback contents

from Network Contents server*

on the Renderer

(this unit).

Possible applications:

1 Press [HOME].

2 Select “Home Network” and press [OK].

3 Select “Media Renderer” and press [OK].

4 [UB420] [UB330] Select “Home Network” or

“Direct Access”*

and press [OK], then

follow the indications on the screen.

5 Operate the DMC compatible devices.

To exit from Media Renderer screen

Press [HOME].



≥ [UB420] [UB330] Direct Access*

connection while using

Home Network feature is only temporary, and the network

connection method returns to the original setting when

exiting.

≥ Depending on the device or connection environment, the

data transfer rate may decrease.

≥ Depending on the contents and the connected equipment,

playback may not be possible.

≥ Items displayed in grey on the display cannot be played

back by this unit.

DLNA compatible server, etc.

Direct Access is a function which allows you to wirelessly

and directly connect wireless LAN-equipped devices to

each other without a wireless router in between. You can

connect devices such as those that support Wi-Fi Direct

DMC compatible software should be installed.

Playing back contents on the

Network Contents server

Server

Player

Using the Digital Media

Controller

Renderer

Server

Controller

Server

Controller

Renderer

- 25 -

Playback

VIERA Link

* [UB420] Only when connecting via an HDMI VIDEO OUT

terminal on this unit.

When the following operations are performed, the

input channel of the TV will be automatically

switched and the screen of this unit will be

displayed.

If this unit is on and the TV is off, the TV

automatically turns on.

– When play starts on the unit

– When you display a menu, such as the HOME

menu or Setup menu

When you set the TV to standby mode, this unit is

also automatically set to standby mode.

When the unit is connected to a Panasonic TV

(VIERA) that supports VIERA Link and an

amplifier/receiver supports VIERA Link.

1 While playing music

Press [OPTION].

2 Select “TV Power Off”.

Only when TV supports “VIERA Link”

By using the TV remote control, you can perform

various playback operations and settings.

See the operating instructions of the TV for more

details.



≥ If you set “VIERA Link” to “Off”, set to “On” (> 34).

(The default setting is “On”.)

≥ The buttons and functions that you can use for this unit

vary depending on the TV. For details, refer to the

operating instructions of the TV.

≥ The operation of this unit may be interrupted when you

press certain buttons on the TV remote control.

≥ VIERA Link, based on the control functions provided by

HDMI which is an industry standard known as HDMI CEC

(Consumer Electronics Control), is a unique function that

we have developed and added. As such, its operation with

other manufacturers’ equipment that supports HDMI CEC

cannot be guaranteed.

≥ Please refer to individual manuals for other manufacturers’

equipment supporting VIERA Link function.

What is VIERA Link?

VIERA Link is a convenient function

which will link the operations of this unit

and a Panasonic TV (VIERA) or other

device under “VIERA Link”.

You can use this function by connecting

the equipment with an HDMI cable*. See

the operating instructions for connected

equipment for operational details.

Automatic input switching

Power on link

Power off link

Playing music continuously

even after turning off the TV

Easy control only with VIERA

remote control

- 26 -

Playback

Option menu

A variety of playback operations and settings can

be performed from this menu.

Available options differ depending on the playing

contents and the condition of the unit.

1 Press [OPTION].

e.g., Ultra HD Blu-ray

≥ When playing music, select “Playback

Settings” and press [OK].

2 Select an item and change the settings.

To exit the screen

Press [OPTION].

Regarding Language : (> 43)

∫ Soundtrack (> 20)

This setting is also able to switch by pressing

[AUDIO].

∫ Audio Channel

Select the audio channel number.

∫ Subtitles

∫ Subtitle Settings

Change the subtitle settings.

∫ Angle

Select the number of the angle.

∫ Repeat Play

Select the item that you want to repeat.

≥ You can repeat the playback of a chapter,

playlist, the entire disc, etc., but the items

displayed will differ depending on the type of

the media.

≥ Select “Off” to cancel.

∫ Shuffle

Select whether to play shuffle or not.

∫ Start Slideshow

Start the slideshow.

∫ Status

Show the status messages.

∫ Rotate RIGHT

∫ Rotate LEFT

Rotate the still picture.

∫ Wallpaper

Set the still picture to the wallpaper of HOME

menu. (> 19)

∫ Video

The recording method of original video appears.

∫ Secondary Video

∫ Playback Information Window (> 20)

This setting is also displayed by pressing

[PLAYBACK INFO.].

∫ Control Panel

Display the Control Panel.

Playing back while using VIERA Link, etc.

Press [RETURN] to hide the Control Panel.

∫ Top Menu

Display Top Menu.

∫ Pop-up Menu

Display Pop-up Menu.

∫ Menu

Display Menu.

[UB420] [UB330]

∫ Reception

The radio wave status during the playback of

Network Contents is displayed. (Only when a

wireless connection is used)

Operation Menu

Pop-up Menu

Top Menu

Playback Information Window

Control Panel

Repeat Play

Angle

Subtitle Settings

Soundtrack

Off

Secondary Video

1 ENG DTS-HD MSTR Multi

Video

Select on/off for images. The

recording method of original

video appears.

Soundtrack

Select on/off for audio and the

language.

e.g.,

- 27 -

Playback

Switch “Set 1”, “Set 2” or “Standard” by using

[2, 1].

≥ Settings for BD Video playback, Ultra HD

Blu-ray playback and settings for the playback

of other types of media are registered

separately.

(The default settings for “Set 1”/ ”Set 2” are the

same as the settings for “Standard”.)

≥ You cannot change the “Standard” settings.

∫ Display

Select a setting suitable for your screen.

∫ Picture Type

Select the picture quality mode during play.

∫ Optimum HDR Adjustment

This setting is also displayed by pressing and

holding [HDR SETTING] for more than

2 seconds. (> 20)

≥ [UB420] HDR Optimiser :

If “On” is selected, you can display highly bright

scenes with smooth gradations based on the

luminance information (static metadata) of

playback content.

– This function works only for HDR (PQ)

material.

– The effect may be enhanced by setting the

“HDR TV Type” that matches your TV in the

Setup menu. (> 30)

≥ Dynamic Range Adjustment :

Set the brightness of the entire screen when

outputting HDR (High Dynamic Range) video to

a connected HDR-compatible TV.

≥ DR Conversion Adjustment :

When this unit is connected to a TV that does

not support HDR (High Dynamic Range) input,

HDR video is output converting to a SDR

(Standard Dynamic Range) video signal. If you

set a smaller value, their contrast will be

reproduced more faithfully, but the entire screen

will appear darker. To increase the brightness,

set a larger value.

∫ Luminance Adjustment

Adjust the contrast, brightness and tone curve

(white/black).

∫ Colour Adjustment

Adjust the colour saturation and hue.

∫ Sharpness Adjustment

Adjust the sharpness of images. The greater the

value is, the sharper images will be.

∫ Noise Reduction

Reduce unnecessary noise in videos. The greater

the value is, the less noise will appear.

∫ Bandwidth Limitation

Adjust the bandwidth limitations.

∫ Progressive

Select the method of conversion for progressive

output to suit the type of material being played.

≥ If the video is disrupted when “Auto” is selected,

select either “Video” or “Film” depending on the

material to be played back.

∫ Reset to Default Picture Settings

Return “Picture Settings” of the selected tab

(“Set 1” or “Set 2”) to the factory preset.

Picture Settings

Noise Reduction

Sharpness Adjustment

Colour Adjustment

Optimum HDR Adjustment

Reset to Default Picture Settings

Luminance Adjustment

Set 1

Ultra HD Ultra HD

Blu-ray Blu-ray

Ultra HD

Blu-ray

Set 1

Ultra HD Ultra HD

Blu-ray Blu-ray

Ultra HD

Blu-ray

The icon changes depending on

the playback media.

e.g., Ultra HD Blu-ray

- 28 -

Playback

∫ Sound Effects

*1, *2

Select the sound effect.

(Upsampling up to 192 kHz/32 bit is possible.)

≥ Night Surround :

Enjoy a movie with powerful sound even when

the volume is kept low at night. The audio is set

in such a way that it can be heard easily.

[UB420]

≥ Remaster :

This feature gives you brighter sound by

increasing the high frequency portion of the

audio.

Recommended setting

[UB420]

≥ Digital Tube Sound :

This feature gives you a warm sound, like that

produced by a vacuum tube amplifier.

Recommended setting

[UB420]

∫ Sound Effect Frequency

Set the maximum sampling frequency for the

audio selected in “Sound Effects”.

≥ Even when “96/88.2kHz” is selected, an audio

source with a sampling frequency of 96 kHz or

higher will be output with the original sampling

frequency.

≥ When “Sound Effects” is set to “Off”, this setting

is disabled.

∫ DSD Decode Sampling Frequency

Select the settings that suit your sound quality

preferences.

∫ DSD LPF Setting

Select the settings that suit your sound quality

preferences.

∫ Dialogue Enhancer*

The volume of the centre channel is raised to

make dialog easier to hear.

[UB420]

∫ High Clarity Sound

Stop processing signals that affect the audio

quality to make the audio quality clearer. (> 32)

Select whether or not to output images.

This setting is able to switch by pressing green

button on the remote control during music

playback.

≥ If “On (Video Off)” is selected, the setting will be

cancelled after you play back a video.

Not every function can be set individually.

This function is effective only when “Digital Audio Output” is

set to “PCM” (> 31).

∫ Signal Format

∫ Graphic Display Level

3D position for the Option menu or message

screen, etc. can be adjusted during 3D playback.

Sound Settings

Remaster 1 Pop and rock

Remaster 2 Jazz

Remaster 3 Classical

Digital Tube

Sound 1

A crisp, delicate sound

Digital Tube

Sound 2

A tight, hi-fi sound

Digital Tube

Sound 3

A soft, rich sound

Digital Tube

Sound 4

A clear, powerful sound

Digital Tube

Sound 5

A distinctive mid-range

sound

Digital Tube

Sound 6

A soft, enveloping sound

3D Settings

Original Keep original picture format.

Side by side

3D picture format comprising

of left and right screens.

- 29 -

Reference

Setup menu

Change the unit’s settings if necessary. The

settings remain intact even if you switch the unit

to standby.

1 Press [HOME].

2 Select “Setup”.

3 Select “Player Settings”.

[UB420]

4 Select an item and change the settings.

To exit the screen

Press [HOME].

∫ Video Format

The items supported by the connected devices

are indicated on the screen as “¢”. When any

item without “¢” is selected, the images may be

distorted.

≥ If “Automatic”*

is selected, the best suited

output resolution to the connected TV is

automatically selected.

∫ 4K(50p/60p) Output

This unit automatically chooses to output images

in 4K*

(50p/60p) when connected to a 4K (50p or

60p) compatible TV.

≥ This item is available only when “Video Format”

is set to “Automatic” and “4K”.

≥ [UB420] This item is not available when

“HDMI(AUDIO) Output Mode” is set to

“Video+Audio”.

≥ To connect to a TV that supports 4K (50p/60p)

4:4:4/8 bit or 4K (50p/60p) 4:2:2/12 bit, select

“4K(50p/60p) 4:4:4”.

Images will not be output correctly with an

HDMI cable that does not support 18 Gbps.

≥ To connect to a TV that supports 4K (50p/60p)

4:2:0/8 bit, select “4K(50p/60p) 4:2:0”.

∫ 24p Output

Content recorded at 24p*

, such as BD-Video

films, is output at 24p when played back.

≥ When this unit is connected to TV compatible

with 4K/24p and “Video Format” is set to

“Automatic” or “4K”, images will be output in 4K/

24p.

≥ When this unit is connected to a TV compatible

with 1080/24p and “Video Format” is set to

“Automatic”, “1080i” or “1080p”, images will be

output in 1080/24p.

≥ If images output in 24p are distorted, change

the setting to “Off”.

[UB420]

∫ HDMI(VIDEO) Output Mode

Set whether or not to output audio from the HDMI

VIDEO OUT terminal.

≥ When an amplifier is connected to the HDMI

AUDIO OUT terminal and this menu item is set

to “Automatic ( Video Only / Video+Audio )”, the

TV may not output audio. In that case, select

“Video+Audio”.

[UB420]

∫ HDMI(AUDIO) Output Mode

Set whether or not to output images from the

HDMI AUDIO OUT terminal.

≥ It is not possible to output 3D, 4K or HDR

content from the HDMI AUDIO OUT/HDMI

VIDEO OUT terminal when “Video+Audio” is

selected.

[UB420]

∫ HDR10+ Setting

You can set enable/disable of the HDR10+

function.

By changing this setting to “On”, you can use the

HDR10+ function under the following conditions:

– A device that supports HDR10+ is connected

(> 10).

– A disc that supports HDR10+ is played back.

≥ The “Optimum HDR Adjustment” setting is

disabled while using the HDR10+ function.

(> 27)

HDMI

RETURN

Player Settings

System

Ratings

Network

Language

Sound

Picture

HDMI

Video Format

Automatic

4K(50p/60p) Output

Off

24p Output

Automatic

HDMI(VIDEO) Output Mode

Automatic

HDMI(AUDIO) Output Mode

Audio Only

HDR10+ Setting

Advanced Settings

- 30 -

Reference

∫ Advanced Settings

Press [OK] to show the following settings:

h Colour Mode

This setting is for selecting colour-space

conversion of the image signal.

h Deep Colour Output

Set the output method to be used when this unit is

connected to a TV that supports Deep Colour.

[UB330] [UB320]

h HDR (High Dynamic Range) Output

Output images in HDR (High Dynamic Range) format

depending on the content and connected device.

[UB420]

h HDR/Colour Gamut Output

Set the output type for HDR (High Dynamic

Range) material.

[UB420]

h SDR/HDR Conv. (Network Service)

When Network Service content is played back,

this converts SDR (Standard Dynamic Range)

content to HDR signals to minimise the screen

distortion that occurs when the displayed

content changes.

h HLG / PQ Conversion

Set whether or not to convert HDR (High Dynamic

Range) videos in HLG format to PQ format before

outputting them when this unit is connected to a

TV that supports only HDR (PQ) format.

≥ [UB420] When “HDR/Colour Gamut Output” is

set to other than “HDR/BT.2020 (Auto)”, this

setting is disabled.

≥ [UB330] [UB320] When “HDR (High Dynamic

Range) Output” is set to “Off”, this setting is

disabled.

[UB420]

h HDR TV Type

Set the type of the connected HDR-compatible

TV. The operation of “HDR Optimiser” in the

“Picture Settings” is optimised based on this

setting. (> 27)

h HDCP Output Setting

If you connect to a TV that does not support

HDCP2.2 via an amplifier or speaker, some

images may be displayed as black screens. In

that case, select “HDCP1.4 Limit”.

h Contents Type Flag

Depending on the playback content, the TV will

output adjusting to the optimal method when a

TV that supports this function is connected.

[UB420]

h Audio Output

This setting selects whether or not to output

audio from HDMI.

≥ To enjoy audio with the HDMI terminal, select

“On”. To enjoy audio with the OPTICAL

terminal, select “Off”. Audio will not be output

from the HDMI terminal regardless of the

settings for “HDMI(VIDEO) Output Mode” and

“HDMI(AUDIO) Output Mode”.

[UB420]

h 7.1ch Audio Reformatting

Surround sound with 6.1ch or less is automatically

expanded and played back at 7.1ch.

≥

If “Off” is selected, sound is played over the

original number of channels. (Note that in the

case of 6.1ch audio, playback will be at 5.1ch.)

≥ Audio reformatting is enabled in the following

cases:

– When you have selected “PCM” in “Digital

Audio Output”.

– When the audio is Dolby Digital, Dolby

Digital Plus, Dolby TrueHD or LPCM.

– BD-Video playback

It displays images at the highest resolution available on

your TV.

A high resolution image/display technology of

approximately 4000 (width) k 2000 (height) pixels.

A progressive image recorded at a rate of 24 frames per

second (motion-picture film). Many BD-Video movie

contents are recorded in 24 frames/second in accordance

with the film materials.

- 31 -

Reference

∫ Still Mode

Select the type of picture shown when you pause

playback.

∫ Seamless Play

This enables smooth playback of the gaps

between pieces of content such as programmes.

≥ The expected effect may not be achieved

depending on the content.

≥ If you select “Off”, playback will be accurate, but

the picture may freeze for a moment.

∫ Dynamic Range Compression

You can listen at low volumes but still hear

dialogue clearly.

(Dolby Digital, Dolby Digital Plus and Dolby

TrueHD only)

≥ “Automatic” is effective only when playing Dolby

TrueHD.

∫ Digital Audio Output

Press [OK] to show the following settings:

h Dolby Audio

h DTS/DTS-HD

h MPEG Audio

Select the audio signal to output.

≥ Select “PCM”, when the connected

equipment cannot decode the respective

audio format. This unit decodes the audio

format and transmits to the connected

equipment.

≥ If you do not make proper settings the audio

may be static or noisy.

h BD-Video Secondary Audio

Select whether or not to mix the primary and

secondary audio (including the button click

sound).

If “Off” is selected, the unit outputs the primary

audio only.



≥ To enjoy BD-Video that supports Dolby Atmos

DTS:X

Connect this unit to an AV amplifier or similar device that

supports it with an HDMI cable, and select the following

settings:

– Dolby Audio: “Bitstream”

– DTS/DTS-HD: “Bitstream”

– BD-Video Secondary Audio: “Off”

Dolby Atmos is a trademark of Dolby Laboratories.

[UB420]

∫ OPTICAL Down Sampling

Set the maximum sampling frequency to be used

when outputting down-sampled audio from the

OPTICAL terminal.

≥ Set a frequency supported by the connected

device.

≥ When playing back BD-Video, signals are

converted to 48 kHz despite the settings in the

following cases:

– when the signals have a sampling frequency

of 192 kHz

– when the disc has copy protection

– when “BD-Video Secondary Audio” is set to

“On”

∫ Downmix

Select the downmix system of multi-channel to

2-channel sound.

≥ Select “Surround encoded”, when the

connected equipment supports the virtual

surround function.

≥ The downmix effect is not available when

“Digital Audio Output” is set to “Bitstream”.

≥ The audio will be output in “Stereo” in the

following cases:

– AVCHD playback

– Playback of secondary audio (including the

button click sound).

Picture

Automatic

Automatically selects the type

of picture shown.

Field

Select if jittering occurs when

“Automatic” is selected.

Frame

Select if small text or fine

patterns cannot be seen

clearly when “Automatic” is

selected.

Sound

- 32 -

Reference

[UB420]

∫ HDMI Output Settings of Music Playback

Minimise the audio noise during music playback

by automatically switching the video output to

1080i.

[UB420]

∫ Settings for High Clarity Sound

Set a terminal that will stop processing audio

signals when “High Clarity Sound” (> 28) is set to

“On (Video Off)” or “On (Video On)”.

≥ Set an option for video playback and audio

playback.

∫ Audio Delay

Synchronization between picture and sound is

corrected by adjusting the delay time of the audio

output.

∫ 3D BD-Video Playback

Select the playback method of 3D compatible

video software.

∫ 3D AVCHD Output

Select the output method of 3D AVCHD videos.

∫ 3D Playback Message

Set to display or hide the 3D viewing warning

screen when playing back the 3D compatible

video software.

∫ Soundtrack Preference

Choose the language for audio.

≥ If “Original” is selected, the original language of

each disc will be selected.

≥ When the selected language is not recorded on

the disc, or depending on how the navigation is

created on the disc, it may playback in a

different language than the selected language.

≥ Enter a code (> 43) when you select “Other

****”.

∫ Subtitle Preference

Choose the language for the subtitle.

≥ When “Automatic” is selected, a subtitle for the

language selected in the “Soundtrack

Preference” is displayed only when the

language other than the language selected in

the “Soundtrack Preference” is played back.

≥ When the selected language is not recorded on

the disc, or depending on how the navigation is

created on the disc, it may playback in a

different language than the selected language.

≥ Enter a code (> 43) when you select “Other

****”.

∫ Menu Preference

Choose the language for the disc menus.

≥ Enter a code (> 43) when you select “Other

****”.

∫ Subtitle Text

Select a desired item according to the language

used for MKV subtitles text.

≥ This item is displayed only after playing back a

file.

∫ On-Screen Language

Choose the language for menus and on-screen

messages.

Language

- 33 -

Reference

∫ Easy Network Setting (> 17)

∫ Network Settings

Perform network-related settings individually.

Press [OK] to show the following settings:

[UB420] [UB330]

h LAN Connection Mode

Select the LAN connection method.

≥ When not using wireless LAN (when turning it

off), select “Wired”.

[UB420] [UB330]

h Wireless Settings

This allows the wireless router and connection

settings to be set up. Current connection

settings and connection state can be checked.

The wireless router connection wizard will be

displayed.

Select a connection method to wireless access

point.

Search for wireless network (> 18)

PUSH button (> 17)

PIN code

This method allows you to set encryption for a

wireless LAN connection with ease.

You can connect to a wireless LAN network

by entering a PIN code generated by this unit

into the wireless access point you want to

connect to.

Manual setting

If a search using “Search for wireless

network” does not find the wireless access

point you want to connect to, or if you cannot

connect to a wireless LAN network with other

methods, enter an SSID manually to establish

a wireless LAN connection.

h IP Address / DNS Settings

This is for checking the state of the network

connection and setting the IP address and

DNS-related.

Press [OK] to show the respective setting.

h Proxy Server Settings

This is for checking the state of connection with

the Proxy server and performing settings.

Press [OK] to show the respective setting.

h Network Service Settings (> 22)

Press [OK] to show the following settings:

Audio Auto Gain Control

Volume that is different depending on the

contents is adjusted automatically to the

standard volume while using the Network

Service.

≥ Depending on contents, this function effect

will not work.

≥ Select “Off” when the audio is distorted.

Time Zone

Set the unit’s time to match your location.

≥ Some Network Service contents require the

time zone to be set. Set time zone if

necessary.

Summer Time

Select “On” when using summer time.

h Network Drive Connection

This unit can access a hard disk shared folder

on a network and play back videos, still

pictures, and music.

h Remote Device Settings (> 24)

Press [OK] to show the following settings:

Device Name Entry

Set the name of this unit to be displayed on

the connected equipment.

Registration Type

Remote Device List

Registering/deregistering of the displayed

equipment can be performed when “Manual”

in “Registration Type” is selected.

≥ You can register up to 16 devices.

Network

Automatic

Allow connections to all

the equipment accessing

this unit.

Manual

Set the permission for

individual equipment

connections accessing this

unit.

- 34 -

Reference

[UB420]

Networked Standby

Even when “Quick Start” is set to “Off”, by

using a remote device (smartphone or tablet),

you can wake the unit from the off state and

start certain Internet content services.

≥ To activate operation from the remote

device, select “On”. But power consumption

in standby mode will increase. (> 41)

≥ To use this function, you will need a remote

device that can run a function that wakes

another device from Networked Standby

and apps designed for various services of

“Network Service”. Refer to the instructions

for the respective apps for details.

≥ Only the devices permitted by the “Remote

Device List” can be operated.

h BD-Live Internet Access (> 21)

You can restrict Internet access when BD-Live

functions are used.

≥ If “Limit” is selected, Internet access is

permitted only for BD-Live contents which

have content owner certificates.

[UB420]

h Voice Control Settings

Press [OK] to show the following settings:

Voice Control

Set whether to operate the unit using a

network-connected device (smart speaker,

etc.).

≥ When this is set to “Off” and the HOME

menu is displayed, this setting is also

displayed by pressing and holding

[OPTION] for more than 5 seconds.

Device ID

This is a number provided to identify another

device, such as a smart speaker, when the

unit is operated from that device.

≥ When “Voice Control” is set to “On” and the

HOME menu is displayed, this setting is

also displayed by pressing and holding

[OPTION] for more than 5 seconds.

Initialize Device Password

This initialises the “Device Password”

displayed in “Device ID”.

≥ If you perform “Default Settings”, the

“Device Password” changes automatically.

∫ Legal Notices

Displays the terms of service for the cloud

services.

The following items use the same password.

Don’t forget your password.

∫ DVD-Video Ratings

Set a ratings level to limit DVD-Video play.

∫ BD-Video Ratings

Set an age limit of BD-Video (including Ultra HD

Blu-ray) play.

∫ Network Service Lock

You can restrict the usage of Network Service.

∫ Easy Settings

You can execute basic settings.

∫ TV Settings

Press [OK] to show the following settings:

h TV System

Perform the setup so it matches the TV System

of the connected TV.

h Screen Saver Function

This is to prevent image retention on the

screen.

≥ When this is set to “On”:

If a list of playback content is displayed and

there is no operation for 5 minutes or more,

the screen switches to HOME menu

automatically.

≥ While playing and pausing, etc., this function

is not available.

h On-Screen Messages

Choose whether to show status messages

automatically.

h VIERA Link

Set to use “VIERA Link” function when

connected via HDMI cable to a device that

supports “VIERA Link”.

≥ Select “Off” when you do not want to use

“VIERA Link”.

Ratings

System

- 35 -

Reference

∫ Quick Start

Speed of start-up from standby mode is

increased.

≥ When set to “On”, the internal control unit will be

powered. The idle power consumption will

increase so compared to when set to “Off”.

≥ The cooling fan may rotate at a slow speed to

prevent the internal temperature from rising.

∫ Remote Control

Change the remote control code if other

Panasonic products react to this remote control.

∫ Firmware Update (> 18)

Press [OK] to show the following settings:

h Automatic Update Check

When this equipment remains connected to the

Internet, it will check for the latest firmware

version when it is turned on and you can update

it if necessary.

h Update Now

You can update the firmware manually if a

firmware update is available.

∫ System Information

Press [OK] to show the following settings:

h Software Licence

Information about the software used by this unit

is displayed.

h Firmware Version Information

Display firmware version of this unit [UB420]

[UB330] and wireless LAN module.

∫ Default Settings

This returns all values in the Setup menu and the

Option menu to the default settings, except for

some settings of network, ratings, remote control

code, on-screen language, etc.

- 36 -

Reference

Troubleshooting guide

Before requesting service, please perform the

following checks.

If the problem remains unresolved, consult

your dealer for instructions.

The following do not indicate a problem with

this unit:

– Regular disc rotating sounds.

– Image disturbance during search.

– Image disturbance when replacing 3D discs.

∫ Unit does not respond to remote

control or unit’s buttons.

Press and hold [Í/I] on the main unit for

3 seconds.

– If still unable to turn the unit off, disconnect the

AC mains lead, wait 1 minute, then reconnect

the AC mains lead.

∫ Cannot eject disc.

1 While the unit is on

Press and hold [OK], the yellow button and

the blue button on the remote control at the

same time for more than 5 seconds.

– POWER LED starts to flash, and “00 RET”

is displayed on the screen.

2 Press [1] (right) repeatedly on the remote

control until “06 FTO” is displayed on the

screen.

3 Press [OK].

To return to the factory default.

h Select “Yes” in “Default Settings” in the Setup

menu. (> 35)

To return all settings to the factory preset.

h Reset the unit as follows:

1 While the unit is on

Press and hold [OK], the yellow button and

the blue button on the remote control at the

same time for more than 5 seconds.

– POWER LED starts to flash, and “00 RET”

is displayed on the screen.

2 Press [1] (right) repeatedly on the remote

control until “08 FIN” is displayed on the

screen.

3 Press and hold [OK] for more than 5 seconds.

This unit is turned off when the input for the

TV is switched.

h This is a normal phenomenon when using

VIERA Link. For details please read the

operating instructions for the TV.

The remote control doesn’t work properly.

h Change the batteries in the remote control.

(> 5)

h The remote control and this unit are using

different codes.

Turn on this unit by using [Í/I] on the main

unit, and check “Remote Control ”, which is

displayed on the screen when you press a

button on the remote control.

Press and hold [OK] and the displayed

number (“”) for more than 5 seconds.

This unit is turned off automatically.

h To save on electricity, this unit is turned off

automatically depending on the media if there

is no button operation for about 20 minutes

when not playing back (such as when paused

or displaying the menu, displaying still

pictures, etc.).

Do you have the latest firmware installed?

Panasonic is constantly improving the unit’s

firmware to ensure that our customers are

enjoying the latest technology. (> 18)

General operation

- 37 -

Reference

You have forgotten your ratings password.

You want to cancel the ratings level.

h The ratings level returns to the factory

defaults.

1 While the unit is on

Press and hold [OK], the yellow button and

the blue button on the remote control at the

same time for more than 5 seconds.

– POWER LED starts to flash, and “00 RET”

is displayed on the screen.

2 Press [1] (right) repeatedly on the remote

control until “03 VL” is displayed on the

screen.

3 Press [OK].

The TV screen turns black.

h In the following cases, HDMI authentication

takes place and a black screen is displayed:

– When “24p Output” is set to “Automatic”.

– When the display is switched between 2D

and 3D images.

– When you quit the 4K playback by

displaying another screen, including the

HOME menu.

– [UB420] When “HDMI Output Settings of

Music Playback” is set to “Sound Quality

Priority”.

This unit does not recognize the USB

connection correctly.

h Disconnect and re-connect the USB cable. If

it still does not recognize the connection, turn

this unit off and on again.

h USB devices may not be recognized by this

unit when connected using the following :

– a USB hub

– a USB extension cable

h If you connect USB HDD to this unit, use the

USB cable that is supplied with the HDD.

h If the USB HDD is not recognized, the power

to the USB HDD may not be supplied. Supply

power from an external source.

h [UB420] If you connect a second USB device

while a screen other than the Home screen is

displayed, it will not be detected. Display the

Home screen and reconnect the USB device

you want to use.

Images from this unit do not appear on the TV

screen, or they are distorted.

h An incorrect resolution is selected in “Video

Format”. Reset the setting as follows:

h The connected devices are changed. Reset

the setting as follows:

1 While the unit is on

Press and hold [OK], the yellow button and

the blue button on the remote control at the

same time for more than 5 seconds.

– POWER LED starts to flash.

2 Press [8] and the blue button on the remote

control at the same time for more than

5 seconds.

Set the item again. (> 29)

– When Dolby Digital Plus, Dolby TrueHD,

and DTS-HD

audio are not output properly,

select “Yes” in “Default Settings” (> 35) and

make proper settings.

– “4K(50p/60p) Output” will be set to “Off”.

Make the correct setting again. (> 29)

h PAL discs cannot be correctly viewed on an

NTSC TV.

h When “3D BD-Video Playback” in the Setup

menu is set to “Automatic”, images may not

be output depending on the connection

method. After removing the disc from this unit,

select “Set before play” in the Setup menu,

and select “2D Playback” in the setup screen

displayed when playing 3D discs. (> 32)

h When outputting in 4K, images may be

distorted depending on the HDMI cable. Use

an HDMI cable that supports 18 Gbps.

[UB420]

Video is not output.

h Video is not output when the “High Clarity

Sound” is set to “On (Video Off)”. (> 28)

h Video from the HDMI AUDIO OUT terminal is

not output when the “HDMI(AUDIO) Output

Mode” is set to “Audio Only”. (> 29)

Picture

- 38 -

Reference

Video is not output in 4K or high-definition.

h Confirm that “Video Format” in the Setup

menu is set properly. (> 29)

h Confirm the HDMI cable, related connections

and the compatibility of TV video input.

To output images in 4K, connect the HDMI

cable to a 4K compatible terminal of the

connected device. (> 10)

h [UB420] Set “HDMI(AUDIO) Output Mode” to

“Audio Only”. (> 29)

h To enjoy image in 4K (50p/60p), set “4K(50p/

60p) Output” to “4K(50p/60p) 4:4:4” or

“4K(50p/60p) 4:2:0”. (> 29)

h If “4K(50p/60p) Output” is set to “4K(50p/60p)

4:4:4”, check to see if the connected HDMI

cable supports 18 Gbps. (> 10, 29)

h If 4K images are not output from the

connected 4K-compatible TV, set “4K(50p/

60p) Output” to “4K(50p/60p) 4:4:4” or

“4K(50p/60p) 4:2:0”. (> 29)

h When the unit is connected to a TV that

supports formats up to 4K(50p/60p) 4:2:0 or

“4K(50p/60p) Output” is set to “4K(50p/60p)

4:2:0”, material recorded in 4K(50p/60p)

cannot be output in HDR.

To play back material recorded in 24p, set

“24p Output” to “Automatic”. (> 29)

Cannot output video in HDR quality even

when connected to an HDR-compatible TV.

h When connected to a device or terminal that

does not support HDR, this unit applies

Dynamic Range Conversion to HDR signals

to output them. In addition, depending on the

disc, it may not be possible to output content

in 2K resolution or perform playback correctly.

(> 21)

h Video may not be output from your TV in HDR

quality, depending on the content.

[UB420] Set “HDR/Colour Gamut Output” to

“HDR/BT.2020 (Auto)” and “HLG / PQ

Conversion” to “Automatic”. (> 30)

[UB330] [UB320] Set “HDR (High Dynamic

Range) Output” and “HLG / PQ Conversion”

to “Automatic”. (> 30)

3D video is not output.

h Connect to a 3D compatible device (e.g., TV

and amplifier/receiver).

h When a non-3D compatible amplifier/receiver

is connected between this unit and a TV, 3D

video is not output. (> 12)

h [UB420] If there is a non-3D compatible

amplifier/receiver connected to the HDMI

AUDIO OUT terminal, set the “HDMI(AUDIO)

Output Mode” to “Audio Only”. (> 29)

h Confirm the settings on this unit and the TV

for 3D. (> 21)

3D video is not output correctly as 2D.

h Select “Set before play” in the Setup menu,

and select “2D Playback” in the setup screen

displayed when playing 3D discs. (> 32, “3D

BD-Video Playback”)

h Discs that have recorded titles with Side by

side (2 screen structure) and that can be

enjoyed in 3D are played back in accordance

with the settings of the TV.

No picture is output from Netflix.

h When the unit is connected to a TV that does

not support HDCP2.2 via an amplifier or

speaker, it may not be possible to view

Netflix.*

If HDCP2.2 is not supported by your TV, try

either of the following solutions:

– Connect the unit and the TV directly.

(> 11, 12)

– Set “HDCP Output Setting” to “HDCP1.4

Limit”. (> 30)

* This limitation is due to a specification defined by Netflix,

Inc.

Press [RETURN] if a black screen is displayed.

[UB420]

Cannot play back videos on the USB device

smoothly.

h Use the port on the rear side of this unit,

which supports USB 3.0.

A black band is displayed around the edge of

the screen.

The aspect ratio of the screen is abnormal.

h Adjust the aspect setting on the TV.

There is a lot of image lag when playing video.

Set “0” all items in the “Noise Reduction”. (

27)

[UB420]

The screen brightness changes automatically.

The screen brightness changes automatically to

suit the scene while using the HDR10+ function.

- 39 -

Reference

Cannot hear the desired audio.

h Check the connections and the “Digital Audio

Output” settings. (> 11, 31)

h [UB420] To output audio from a device

connected with an HDMI cable, set “Audio

Output” to “On” in the Setup menu. (> 30)

h [UB420] When connecting this unit to a TV via

an HDMI VIDEO OUT and to an amplifier/

receiver via an HDMI AUDIO OUT, set

“HDMI(VIDEO) Output Mode” to “Automatic

( Video Only / Video+Audio )”. (> 11, 29)

[UB420] Even when gapless playback is

performed for an album or similar group of

songs containing a sound source recorded at

a live performance or concert (a music file

containing songs that are recorded

continuously), the playback is interrupted

between songs.

h In the following cases, playback is interrupted

between songs:

– When the file contains recordings that differ

from one another in their settings, such as

file format, sampling frequency, and

channel number

– When you set “Repeat Play” to “One track”

or “Shuffle” to “On” during gapless playback

– When files of 100 or more songs are

contained in a single folder

There is no sound coming out.

h [UB420] To output audio using OPTICAL

terminal, set “OPTICAL Down Sampling”

properly. (> 31)

h Refer to “Connecting to an amplifier/receiver”

(> 11 - 15) to check the audio output settings

suited to the connections of your device.

[UB420] In the following cases, audio is not

output from the terminals listed below:

≥HDMI VIDEO OUT terminal

– When a device is connected to the HDMI

AUDIO OUT terminal and “HDMI(VIDEO)

Output Mode” is set to “Automatic ( Video

Only / Video+Audio )” (> 29)

– When “Audio Output” in “Advanced

Settings” is set to “Off” (> 30)

– While playback is being performed with

“Audio Output” in “Settings for High Clarity

Sound” set to “OPTICAL Only” (> 32)

≥HDMI AUDIO OUT terminal

– When “Audio Output” in “Advanced

Settings” is set to “Off” (> 30)

– While playback is being performed with

“Audio Output” in “Settings for High Clarity

Sound” set to “OPTICAL Only” (> 32)

≥OPTICAL terminal

– When a device is connected to the HDMI

AUDIO OUT terminal and “Audio Output” in

“Advanced Settings” is set to “On” (> 30)

– While playback is being performed with

“Audio Output” in “Settings for High Clarity

Sound” set to “HDMI Only” (> 32)

Disc cannot be played.

h The disc is dirty. (> 5)

h The disc is not finalized. (> 7)

h Depending on the Ultra HD Blu-ray disc, it

may not be possible to perform playback

unless this unit is connected to the Internet.

Still pictures (JPEG) do not play back

normally.

h The images that were edited on the PC, such

as Progressive JPEG, etc., may not be played

back.

I can’t play back BD-Live.

h Confirm that this unit is connected to the

broadband Internet. (> 16)

h Confirm the “BD-Live Internet Access”

settings. (> 34)

h Confirm a USB device is connected to the

USB port. (> 9)

I can’t connect to the network.

h Confirm the network connection and settings.

(> 16, 17, 33)

h [UB420] [UB330] There may be interference

that prevents the unit from detecting your

home network. Place the unit and the wireless

router closer to each other. This unit may be

able to detect your network name (> 18,

“SSID”).

h Check the operating instructions for each

device and connect accordingly.

Audio

Playback

Network

- 40 -

Reference

[UB420] [UB330]

When using wireless LAN connection, video

from the Network Contents server* is not

played back or video frames are dropped

during playback.

h Higher transfer rate router such as 802.11n

(2.4 GHz or 5 GHz) or [UB420] 802.11ac

wireless router may solve the problem. If you

use 802.11n (2.4 GHz or 5 GHz) or [UB420]

802.11ac wireless router, it is necessary to set

the encryption type to “AES”.

Simultaneous use with a microwave, cordless

telephone etc. at 2.4 GHz may result in

connection interruptions or other problems.

h On the “Wireless Settings” screen (> 33), the

continuous lighting of at least 4 “Reception”

indicators is the target for a stable connection.

If 3 or fewer indicators are lit or the

connection is being interrupted, change the

position or angle of your wireless router and

see if the connection state improves. If there

is no improvement, connect to a wired

network and perform the “Easy Network

Setting” (> 17) again.

* DLNA compatible server, etc.

Cannot read. Please check the disc.

h You inserted an incompatible disc.

Cannot play this file.

h You tried to play a non-compatible video.

No disc inserted.

h The disc may be upside down.

$ This operation cannot be performed now.

h Some operations are unsupported by the unit.

(For example, reverse slow motion, etc.)

IP address is not set.

h The “IP Address” in “IP Address / DNS

Settings” is “---. ---. ---. ---”. Set the “IP

Address”, “Subnet Mask”, and “Gateway

Address”. (Select the automatic address

acquisition if necessary.)

[UB420] [UB330]

The wireless access point currently has a low

network security setting. It is recommended to

change to a higher setting.

h Set a stronger network security level referring

to the wireless router operating instructions.

When the POWER LED is flashing other than

during power up or down of this unit, check the

message on the TV screen. If a message is not

displayed on the TV screen, determine the type of

the error by checking the way the POWER LED is

flashing.

(Flashes 6 times)

h The remote control and this unit are using

different codes.

Turn on this unit by using [Í/I] on the main

unit, and check “Remote Control ” which is

displayed on the screen when you press a

button on the remote control.

Press and hold [OK] and the displayed

number (“”) for at least 5 seconds.

(Flashes 4 times)

h The unit fails to operate properly. Press [Í/I]

on the main unit for 3 seconds to switch the

unit to standby, then switch back on.

(Flashes)

h The copyright protected disc cannot be

played back.

One of the devices connected to this unit (TV,

amplifier, etc.) does not support copyright

protection.

h Temperature of this unit is hot and the unit

switches to standby for safety reasons.

Wait for about 30 minutes.

Install or place this unit with good ventilation.

h A firmware update is in progress.

(Flashes 3 times)

h The disc in use cannot be played back since

the copyright information is invalid.

h A firmware update using a USB device is

complete.

Messages on the screen

POWER LED

Symbols indicate the following states:

Flash

No illumination

Repetition

- 41 -

Reference

Specifications

≥ Specifications are subject to change without notice.

General

Signal system PAL/NTSC

Operating temperature

range

i5 oC to i35 oC

Operating humidity

range

10 % to 80 % RH (no

condensation)

[UB420]

DIGITAL AUDIO OUT

(OPTICAL)

1pc.

Output format : PCM, Dolby

Digital, DTS

HDMI OUT

(19 pin type A)

[UB420]

2 pcs.

[UB330] [UB320]

1pc.

Output Audio format : PCM,

Dolby Digital, Dolby Digital Plus,

Dolby TrueHD, DTS

, DTS-HD

High Resolution Audio

DTS-HD Master Audio

USB port (Type A) Front : 1 pc.,

DC 5 V, Max. 500 mA

[High-Speed USB (USB 2.0)]

[UB420]

Rear : 1 pc.,

DC 5 V, Max. 900 mA

[Super-Speed USB (USB 3.0)]

LAN (Ethernet) Port 1pc.

10BASE-T/100BASE-TX

[UB420] [UB330]

Wireless LAN

Standard Compliance:

[UB420]

IEEE802.11 a/b/g/n/ac

[UB330]

IEEE802.11 a/b/g/n

Frequency Range:

2.4 GHz/5 GHz band

Security:

Encryption type: TKIP/AES,

Authentication type: PSK,

WEP (64 bit/128 bit)

LASER Specification Class 1 LASER Product

Wave length:

770-800 nm (CDs)/

650-666 nm (DVDs)/

400-410 nm (BDs)

Laser power: No hazardous

radiation is emitted with the

safety protection

Power supply AC 220 V to 240 V, 50 Hz

Power consumption [UB420]

Approx. 29 W

[UB330]

Approx. 22 W

[UB320]

Approx. 21 W

[UB420]

Power consumption in

networked standby

mode

Approx. 1 W

(Quick Start: Off, Networked

Standby: On)

Power consumption in

standby mode

Approx. 0.3 W

(Quick Start: Off,

[UB420] Networked Standby: Off)

Dimensions (WkHkD)

Including the projecting

parts

[UB420]

320 mmk45 mmk199 mm

[UB330] [UB320]

320 mmk45 mmk193 mm

Mass [UB420]

Approx. 1.4 kg

[UB330] [UB320]

Approx. 1.3 kg

File format

File format Extension Reference

MKV

(Compression

methods

Video: H.264/HEVC

Audio:AAC, PCM,

Vorbis, FLAC)

“.MKV”,

“.mkv”

≥ Resolution up to

3840x2160 25p/30p,

4096x2160 24p.

≥ The video file and

subtitles text file are

inside the same folder,

and the file names are

the same except for the

file extensions.

≥

Some MKV files may not

be played back correctly,

depending on the video

resolution, frame rate

condition, subtitle format

and so on.

Subtitles

text file

“.SRT”,

“.srt”,

“.SUB”,

“.sub”,

“.TXT”,

“.txt”

mp4

(Compression

methods

Video: H.264/HEVC

Audio: AAC)

“.MP4”,

“.mp4”,

“.MOV”,

“.mov”

≥ Resolution up to

3840×2160 25p/30p,

4096×2160 24p. (except

MPEG2)

≥ Some mp4/MPEG files

may not be played back

correctly, depending on

the video resolution,

frame rate condition and

so on.

≥ MOTION JPEG is not

supported.

≥ Depending on the audio

compression method,

only images may be

played back and it may

not be possible to output

audio.

MPEG

(TS/PS)

(Compression

methods

Video: MPEG2

/H.264*

/HEVC*

Audio: AAC*

/Dolby Digital

/LPCM*

)

“.MPG”,

“.mpg”,

“.MPEG”,

“.mpeg”,

“.M2TS”,

“.m2ts”,

“.MTS”,

“.mts”,

“.TS”,

“.ts”

JPEG

“.JPG”,

“.jpg”

≥ MOTION JPEG and

Progressive JPEG are

not supported.

≥ You may not be able to

play back the file if you

have edited the folder

structure or the file name

on a PC or other device.

MPO

“.MPO”,

“.mpo”

3D still picture

MP3

“.MP3”,

“.mp3”

This unit supports ID3 tags,

but only titles, artist names

and album names can be

displayed.

- 42 -

Reference

TS only

PS only

≥ With certain recording states and folder structures, the play

order may differ or playback may not be possible.

≥ A combined total of up to 10,000 files and folders can be

displayed as playable data in each folder regardless of

their format.

(Even when the picture playback menu is displayed, for

example, if a folder in the menu contains playable videos

and music files, they are also counted as playable data.)

The audio output differs depending on the

settings on the unit [UB420] and which terminals

are connected to the amplifier/receiver. (> 31,

“Digital Audio Output”)

≥ The number of channels listed is the maximum possible

number of output channels when connected to amplifier/

receiver compatible with the respective audio format.

[UB330] [UB320] The maximum possible number of Dolby

sound is 2ch PCM.

When “BD-Video Secondary Audio” is set to “On”, the

audio will be output as Dolby Digital, DTS Digital

Surround

or 5.1ch PCM. However, when playing

BD-Video without secondary audio or navigation sounds,

the audio is output as the original format.

The audio output is amplified from 5.1ch or 6.1ch to 7.1ch

depending on the DTS, Inc. specifications.

File format Extension Reference

FLAC

“.FLAC”,

“.flac”

This unit supports tags, but

only titles, artist names and

album names can be

displayed. Maximum

sampling rate: 192 kHz/

24 bit

WAV

“.WAV”,

“.wav”

Maximum sampling rate:

[UB420]

384 kHz/32 bit

[UB330] [UB320]

192 kHz/32 bit

AAC

“.M4A”,

“.m4a”

Maximum sampling rate:

48 kHz/320 kbps

WMA

“.WMA”,

“.wma”

This unit supports tags, but

only titles, artist names and

album names can be

displayed. Maximum

sampling rate:

48 kHz/385 kbps

DSD

(DFF, DSF)

“.DSF”,

“.dsf

”,

“.DFF

”,

“.dff

”

[UB420]

2.8 MHz (2 ch/5.1 ch),

5.6 MHz (2 ch/5.1 ch),

11.2 MHz (2 ch only)

[UB330] [UB320]

2.8 MHz (2 ch/5.1 ch),

5.6 MHz (2 ch only)

ALAC

“.M4A”,

“.m4a

”

96 kHz/32 bit (Max.7.1 ch),

176.4/192 kHz/32 bit

(Max.5.1 ch)

AIFF

“.aif”,

“.aiff”

Maximum sampling rate:

[UB420]

384 kHz/32 bit

[UB330] [UB320]

192 kHz/32 bit

Audio information

Terminal

“Digital Audio Output”

“Bitstream”

“PCM”

Output

channel

HDMI OUT

Outputs using

original audio

BD-Video :

7.1ch PCM

*2*3

DVD-Video :

5.1ch PCM

[UB420]

DIGITAL

AUDIO

OUT

(OPTICAL)

Dolby Digital/

DTS Digital

Surround

Down-mixed

2ch PCM

- 43 -

Reference

When this unit works as a Network Contents

client, following contents are playable.

≥ File formats that are not supported by your

Network Contents server* cannot be played.

* DLNA compatible server, etc.

Video

Photo

Audio

≥ Depending on the server, the contents other than stated

above can be played back.

Supported format for

Network Contents Playback

Container Video codec Audio codec

Example of

file extension

MKV

H.264

HEVC

AAC

PCM

Vorbis

FLAC

.mkv

AVCHD H.264 Dolby Digital .mts

MP4

H.264

HEVC

AAC .mp4, .mov

PS MPEG2

Dolby Digital

Linear PCM

.mpg, .mpeg

MPEG2

H.264

HEVC

AAC

Dolby Digital

.m2ts, .ts

Format Example of file extension

JPEG .jpg

Audio codec Example of file extension

MP3 .mp3

FLAC .flac

WAV .wav

AAC .m4a, .adts

WMA .wma

ALAC .m4a

DSD .dsf, .dff

AIFF .aif, .aiff

Linear PCM —

Language code list

Display languages list

Abkhazian: 6566

Afar: 6565

Afrikaans: 6570

Albanian: 8381

Amharic: 6577

Arabic: 6582

Armenian: 7289

Assamese: 6583

Aymara: 6589

Azerbaijani: 6590

Bashkir: 6665

Basque: 6985

Bengali; Bangla:

6678

Bhutani: 6890

Bihari: 6672

Breton: 6682

Bulgarian: 6671

Burmese: 7789

Byelorussian: 6669

Cambodian: 7577

Catalan: 6765

Chinese: 9072

Corsican: 6779

Croatian: 7282

Czech: 6783

Danish: 6865

Dutch: 7876

English: 6978

Esperanto: 6979

Estonian: 6984

Faroese: 7079

Fiji: 7074

Finnish: 7073

French: 7082

Frisian: 7089

Galician: 7176

Georgian: 7565

German: 6869

Greek: 6976

Greenlandic: 7576

Guarani: 7178

Gujarati: 7185

Hausa: 7265

Hebrew: 7387

Hindi: 7273

Hungarian: 7285

Icelandic: 7383

Indonesian: 7378

Interlingua: 7365

Irish: 7165

Italian: 7384

Japanese: 7465

Javanese: 7487

Kannada: 7578

Kashmiri: 7583

Kazakh: 7575

Kirghiz: 7589

Korean: 7579

Kurdish: 7585

Laotian: 7679

Latin: 7665

Latvian, Lettish:

7686

Lingala: 7678

Lithuanian: 7684

Macedonian: 7775

Malagasy: 7771

Malay: 7783

Malayalam: 7776

Maltese: 7784

Maori: 7773

Marathi: 7782

Moldavian: 7779

Mongolian: 7778

Nauru: 7865

Nepali: 7869

Norwegian: 7879

Oriya: 7982

Pashto, Pushto:

8083

Persian: 7065

Polish: 8076

Portuguese: 8084

Punjabi: 8065

Quechua: 8185

Rhaeto-Romance:

8277

Romanian: 8279

Russian: 8285

Samoan: 8377

Sanskrit: 8365

Scots Gaelic: 7168

Serbian: 8382

Serbo-Croatian:

8372

Shona: 8378

Sindhi: 8368

Singhalese: 8373

Slovak: 8375

Slovenian: 8376

Somali: 8379

Spanish: 6983

Sundanese: 8385

Swahili: 8387

Swedish: 8386

Tagalog: 8476

Tajik: 8471

Tamil: 8465

Tatar: 8484

Telugu: 8469

Thai: 8472

Tibetan: 6679

Tigrinya: 8473

Tonga: 8479

Turkish: 8482

Turkmen: 8475

Twi: 8487

Ukrainian: 8575

Urdu: 8582

Uzbek: 8590

Vietnamese: 8673

Volapük: 8679

Welsh: 6789

Wolof: 8779

Xhosa: 8872

Yiddish: 7473

Yoruba: 8979

Zulu: 9085

Language Code Language Code Language Code

ENG

FRA

DEU

ITA

ESP

NLD

SVE

NOR

DAN

POR

RUS

English

French

German

Italian

Spanish

Dutch

Swedish

Norwegian

Danish

Portuguese

Russian

JPN

CHI

KOR

MAL

VIE

THA

POL

CES

SLK

HUN

FIN

Japanese

Chinese

Korean

Malay

Vietnamese

Thai

Polish

Czech

Slovak

Hungarian

Finnish

ARA

HIN

PER

IND

MRI

BUL

RUM

GRE

TUR

Arabic

Hindi

Persian

Indonesian

Maori

Bulgarian

Romanian

Greek

Turkish

Others

Display Language Display Language Display Language

- 44 -

Reference

Licenses

“AVCHD”, “AVCHD 3D”, “AVCHD Progressive” and “AVCHD 3D/

Progressive” are trademarks of Panasonic Corporation and Sony

Corporation.

Java is a registered trademark of Oracle and/or its affiliates.

Dolby, Dolby Audio, and the double-D symbol are trademarks of

Dolby Laboratories.

For DTS patents, see http://patents.dts.com.

Manufactured under license from DTS, Inc.

DTS, the Symbol, DTS and the Symbol together, DTS-HD, and the

DTS-HD logo are registered trademarks and/or trademarks of

DTS, Inc. in the United States and/or other countries.

The product with Hi-Res AUDIO logo is conformed to

High-Resolution Audio standard defined by Japan Audio Society.

This logo is used under license from Japan Audio Society.

The terms HDMI and HDMI High-Definition Multimedia Interface,

and the HDMI Logo are trademarks or registered trademarks of

HDMI Licensing Administrator, Inc. in the United States and other

countries.

<AVC>

This product is licensed under the AVC Patent Portfolio License for

the personal use of a consumer or other uses in which it does not

receive remuneration to (i) encode video in compliance with the

AVC Standard ("AVC Video") and/or (ii) decode AVC Video that

was encoded by a consumer engaged in a personal activity and/or

was obtained from a video provider licensed to provide AVC

Video. No license is granted or shall be implied for any other use.

Additional information may be obtained from MPEG LA, L.L.C.

See http://www.mpegla.com

<VC-1>

This product is licensed under the VC-1 Patent Portfolio License

for the personal and non-commercial use of a consumer to (i)

encode video in compliance with the VC-1 Standard ("VC-1

Video") and/or (ii) decode VC-1 Video that was encoded by a

consumer engaged in a personal and non-commercial activity

and/or was obtained from a video provider licensed to provide

VC-1 Video. No license is granted or shall be implied for any other

use. Additional information may be obtained from MPEG LA,

L.L.C.

See http://www.mpegla.com

“DVD Logo” is a trademark of DVD Format/Logo Licensing

Corporation.

“Wi-Fi

”, “Miracast

”, and “Wi-Fi Direct

” are registered

trademarks of Wi-Fi Alliance

“Wi-Fi Protected Setup

” and “WPA

” are trademarks of Wi-Fi

Alliance

Windows is a trademark or a registered trademark of Microsoft

Corporation in the United States and other countries.

Android is a trademark of Google Inc.

Adobe is a trademark or registered trademark of Adobe Systems

Incorporated in the United States and/or other countries.

HDR10+

logo is a trademark of HDR10+ Technologies, LLC.

is a Verance

Corporation trademark. Protected by U.S. Patent 7,369,677 and

worldwide patents issued and pending under license from Verance

This product incorporates the following software:

(1) the software developed independently by or for Panasonic

Corporation,

(2) the software owned by third party and licensed to Panasonic

Corporation,

(3) the software licensed under the GNU General Public License,

Version 2.0 (GPL V2.0),

(4) the software licensed under the GNU LESSER General Public

License, Version 2.1 (LGPL V2.1), and/or

(5) open source software other than the software licensed under

the GPL V2.0 and/or LGPL V2.1.

The software categorized as (3) - (5) are distributed in the hope

that it will be useful, but WITHOUT ANY WARRANTY, without

even the implied warranty of MERCHANTABILITY or FITNESS

FOR A PARTICULAR PURPOSE.

Please refer to the detailed terms and conditions thereof shown in

the Player Settings menu.

At least three (3) years from delivery of this product, Panasonic

will give to any third party who contacts us at the contact

information provided below, for a charge no more than our cost of

physically performing source code distribution, a complete

machine-readable copy of the corresponding source code covered

under GPL V2.0, LGPL V2.1 or the other licenses with the

obligation to do so, as well as the respective copyright notice

thereof.

Contact Information: oss-cd-request@gg.jp.panasonic.com

The source code and the copyright notice are also available for

free in our website below.

https://panasonic.net/cns/oss/

(1) MS/WMA

This product is protected by certain intellectual property rights

of Microsoft Corporation and third parties. Use or distribution of

such technology outside of this product is prohibited without a

license from Microsoft or an authorized Microsoft subsidiary

and third parties.

(2) MS/PlayReady/Final Product Labeling

This product contains technology subject to certain intellectual

property rights of Microsoft. Use or distribution of this

technology outside of this product is prohibited without the

appropriate license(s) from Microsoft.

(3) MS/PlayReady/End User Notices

Content owners use Microsoft PlayReady™ content access

technology to protect their intellectual property, including

copyrighted content. This device uses PlayReady technology

to access PlayReady-protected content and/or

WMDRM-protected content. If the device fails to properly

enforce restrictions on content usage, content owners may

require Microsoft to revoke the device’s ability to consume

PlayReady-protected content. Revocation should not affect

unprotected content or content protected by other content

access technologies. Content owners may require you to

upgrade PlayReady to access their content. If you decline an

upgrade, you will not be able to access content that requires

the upgrade.

(4) Vorbis, FLAC, [UB420] [UB330] WPA Supplicant

The software licenses are displayed when “Software Licence”

in the Setup menu is selected. (> 35)

- 45 -

Reference

Panasonic Corporation

Web Site: http://www.panasonic.com

TQBS0172-2

F0318HA2079

NORSK

Produkt

For å redusere faren for brann, elektrisk støt eller skade på

apparatet:

≥ Utsett ikke produktet for regn, fukt, drypping eller sprut.

≥ Ikke plasser objekter som er fylt med væske, som vaser,

på apparatet.

≥ Bruk det anbefalte tilbehøret.

≥ Fjern ikke deksler.

≥ Reparer ikke denne enheten selv, overlat service til

kvalifisert servicepersonell.

Vekselstrømnett

Nettstøpselet er trukket ut fra denne enheten.

Installer denne enheten slik at nettstøpselet umiddelbart kan

trekkes fra stikkontakten.

Produkt

≥ Dette produktet anvender en laser. Betjening av kontroller

eller justering eller andre inngrep enn de beskrevet i

denne bruksanvisning kan føre til farlig bestråling.

≥ Plasser ikke åpen ild, slik som levende lys, oppå

apparatet.

≥ Dette apparatet er beregnet for bruk under moderate

klimaforhold.

Plassering

For å redusere faren for brann, elektrisk støt eller skade på

apparatet:

≥ Ikke plasser apparatet i en bokhylle, et innebygget

kabinett eller et annet lukket sted. Pass på at produktet er

godt ventilert.

≥ Apparatets ventilasjonsåpninger må ikke dekkes til med

aviser, duker, gardiner eller lignende.

(Inside of product)

(Produktets innside)

ADVARSEL FORSIKTIG

LASER-spesifikasjon

Klasse 1 LASER-produkt:

Bølgelengde :770-800 nm (CD)/650-666 nm (DVD)/

400-410 nm (BD)

Laserstyrke : Ingen farlig stråling sendes ut

Manufactured by:

Importer for Europe:

Panasonic Corporation

Kadoma, Osaka, Japan

Panasonic Marketing Europe GmbH

Panasonic Testing Centre

Winsbergring 15, 22525 Hamburg, Germany

Panasonic DP-UB330 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Panasonic DP-UB330

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info