569364
65
Verklein
Vergroot
Pagina terug
1/88
Pagina verder
65
VQT4W64
Setting menus
Settings for DVB-C Channels/
Settings for DVB-T Channels
Press [OK] to show the following settings.
[DVB-C] DVB Manual Tuning
You can set channels manually that the DVB Auto Setup could not
complete successfully.
1 Press [2, 1] to adjust the frequency.
Adjust the frequency by checking the signal strength and signal
quality displays.
[Refer to “Signal Condition” (> right) for signal quality and
signal strength.]
2 Press [3, 4] to select “Symbol Rate” and enter Symbol Rate for
tuning with the numbered buttons if needed.
Normally set to “Auto”. (Default : “Auto”)
3 Press [3, 4] to select “Bandwidth” and press [2, 1] to select
“7 MHz” or “8 MHz”.
4 Press [OK] to start scan.
The set channel is displayed in the table.
5 Press [EXIT] and press [WXCH] to check that applicable
channels have been selected.
[DVB-T] DVB Manual Tuning
You can set channels manually that the DVB Auto Setup could not
complete successfully.
1 Press [3, 4] to select the channel you want to set.
2 Press [2, 1] to adjust the frequency.
Adjust the frequency by checking the signal strength and signal
quality displays.
[Refer to “Signal Condition” (> right) for signal quality and
signal strength.]
3 Press [OK] to start scan.
The set channel is displayed in the table.
4 Press [EXIT] and press [WXCH] to check that applicable
channels have been selected.
Add New DVB Channels
You can search for newly added digital channels to receive.
[DVB-C] Press [3, 4] to select “Quick Scan” or “Full Scan” and press
[OK].
The unit starts searching for newly available digital channels. This
takes about 20 minutes.
A message is displayed when the search is finished.
“No new DVB channels found.” is displayed when no new channels
can be found.
Press [OK] to save the newly found channels.
New Channel Message
Signal Condition
You can check the Signal Condition.
Press [WXCH] to select the channel.
When “Signal Condition” is displayed in grey and cannot be
selected:
1 Press [EXIT] to exit the screen.
2 Press [WXCH] to select a digital channel. “D” appears on the
unit’s display.
3 Display the Setup menu again (> 64).
Signal Quality
The quality of the signal is shown.
Below 2 (display red):
The signal quality is so poor that there may be interference in the
pictures and sound.
2–5 (display orange):
The signal quality is basically adequate, but brief interference in the
pictures and sound is possible in isolated case.
Over 5 (display green):
Optimum picture and sound quality.
Signal Strength
The strength of the signal is shown.
The display for signal strength is grey. “0” means signal strength 0%,
“10” means signal strength 100%.
If the signal is too strong, the display will change from grey to red.
Reduce the signal amplification at your aerial.
When the signal is weak:
adjust the aerial reception with “DVB Manual Tuning” in the
Setup menu (> left).
check that the current digital broadcast channel is correctly
broadcasting.
[DVB-C] Network Name
The network name which is stored in the transport stream list for the
current DVB service is displayed.
If there is no network name in it, “Unknown” is displayed.
[DVB-C] Parameter
The frequency and the symbol rate are displayed.
[DVB-C] DVB Advanced Setup
You can set up channels by entering “Home Frequency” and
“Network ID” obtained from your cable provider.
Digital timer recording programmes are cancelled and digital
tuning data are replaced by new ones.
1 Press [2, 1] to select “Yes”.
2 Press [3, 4] to select “Home Frequency” and press [2, 1] to
select the predefined value.
You can also enter the frequency with numbered buttons.
3 Press [3, 4] to select “Network ID” and enter Network ID with
numbered buttons.
4 Press [OPTION] to add “Symbol Rate”, if needed.
If you do not need to add “Symbol Rate”, go to step 6.
5 Press [3, 4] to select “---- ksym/s (User Def.)” and enter the
symbol rate with numbered buttons and then press [OK].
6 Press [OK].
Advanced Setup starts.
If there is no signal quality and/
or signal strength, press the
“Red” button and select the
correct channel system.
[DVB-C] [DVB-T]
DVB Manual Tuning
NewChannel Name Type
RETURN
010
Bandwidth
Symbol Rate
Auto
8
Signal Quality
010
Signal Strength
Frequency
START
SCAN
Number
SELECT
Free TV : 0 Pay TV : 0 Radio : 0
No.
Frequency
MHz
MHz
338,00
0 9
DVB Manual Tuning
Frequency
MHz
NewChannel Name Type
RETURN
010
010
[CH24]
498,0
Signal Quality
Signal Strength
Channel System
Western Europe (CCIR)
Change Channel System
OFFSET
START SCAN
CH
TV : 0 Radio : 0 Data : 0
No.
Add New DVB Channels
Progress 0%
100%
No. QualityChannel Name Type
Add New DVB Channels
Scan CH 5 69
CH QualityChannel Name Type
A new DVB Channel has been found.
Start DVB Auto Setup ?
Selecting DVB Auto Setup will delete
all Timer Programmes.
New Channel
NoYes
[Automatic] When a new DVB channel is added, New Channel
Message appears automatically.
If you select “Yes” on the display, Auto-Setup starts
(all channel settings are deleted. The timer
recording programmes are also cancelled.).
[Off] New Channel Message does not appear.
[DVB-C] [DVB-T]
Signal Quality 010
Signal Strength 010
DVB Channel
DVB Signal Condition
RETURN
Channel
+
Channel
Network Name
Parameter
1 Das Erste
Kabel Deutschland
113 MHz, 6900kS/s
Signal Quality 010
Signal Strength 010
DVB Channel
DVB Signal Condition
RETURN
Channel
+
Channel
[CH14] 5 BR3
Signal Quality 010
Signal Strength 010
DVB Channel
DVB Signal Condition
RETURN
Channel
+
Channel
[CH14] 5 BR3
DVB Advanced Setup
010
Network ID
0
Signal Quality
010
Signal Strength
Home Frequency
MHz
338,00
DMREX96C-VQTXXXX_eng.book 65 ページ 2013年3月5日 火曜日 午後5時51分
65

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic DMREX96CEG bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic DMREX96CEG in de taal/talen: Engels als bijlage per email.

De handleiding is 4,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Panasonic DMREX96CEG

Panasonic DMREX96CEG Gebruiksaanwijzing - Deutsch - 88 pagina's

Panasonic DMREX96CEG Gebruiksaanwijzing - Français - 88 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info