502346
27
Verklein
Vergroot
Pagina terug
1/88
Pagina verder
27
RQT9167
Advanced Features
Recording from a Satellite Receiver
[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
Manual Recording
Preparation:
]RAM\ If the disc is protected, release protection
(¼ 58).
Connect a satellite receiver to this unit’s input
terminals (¼ 11).
When the output signal from the external equipment
is NTSC, change the “TV System” to “NTSC” in the
Setup menu (¼ 65).
With the unit stopped
SELECT
INPUT
to select “AV2” for the
satellite receiver you have
connected.
Select the channel on the satellite
receiver.
REC MODE
to select the recording
mode.
Tips
To skip unwanted parts
Press [PAUSE] to pause recording. (Press again to restart
recording.)
To stop recording
Press [STOP].
Linked timer recordings with external
equipment (SKY Digital STB/satellite
receiver) — EXT LINK
Preparation:
]RAM\ If the disc is protected, release protection (¼ 58).
Make sure you connect the AV2 terminal of this unit
to “VCR Scart Terminal” of a SKY Digital STB/
satellite receiver with a 21-pin scart cable (¼ 11).
Set the “AV2 Input” and “Ext Link” to match the
connected equipment in the Setup menu (¼ 65).
Make timer programming on SKY
Digital STB/satellite receiver.
Refer to the equipment’s operating instructions.
DRIVE
SELECT
to select the HDD or DVD
drive.
If you selected the DVD drive, insert a disc (¼ 17).
Tips
To cancel the external control
Press [EXT LINK] to stop recording or to cancel linked timer
recording standby (The unit turns on and ‘EXT-L” disappears.).
Manual timer recordings (¼ 28)
Notes
In order to prevent accidental operation, press [EXT LINK] to
cancel the setting after recording is fi nished.
This function does not work when “TV System” is set to “NTSC” in
the setup menu (¼ 65).
This function does not work with some equipment. Refer to the
equipment’s operating instructions.
The beginnings of recordings may not be recorded correctly in
some cases.
When “Ext Link” is set to “Ext Link 2”, this function does not work
if the input signal is NTSC system.
Programmes are recorded as one title on this unit when the end
time of the earlier timer recording and the start time of the later
timer recording are close to each other.
[HDD] [RAM] To divide the titles, go to “Divide Title” (¼ 46).
While the unit is in EXT LINK standby mode or recording, video
picture is from the AV2 terminal irrespective of “AV1 Output”
setting (¼ 65).
REC
to start recording.
To record programmes from a SKY Digital STB/satellite
receiver using timer programming
EXT LINK
The unit turns off and “EXT-L” lights on the
unit’s display to indicate timer recording
standby has been activated.
While the unit is in EXT LINK standby mode
or recording, most operations on this unit are
prohibited ([ OPEN/CLOSE], [/l] etc.).
When you operate, press [EXT LINK] to
cancel EXT LINK standby mode or recording
(The unit turns on and “EXT-L disappears.).
DRIVE
SELECT
to select the HDD or DVD
drive.
If you selected the DVD drive, insert a disc
(¼ 17).
This unit cannot record NTSC signals to discs that
already have PAL signal recordings. (However, both
types of programmes can be recorded onto the HDD.)
DMR-EX768EB.indb 27DMR-EX768EB.indb 27 2008/03/06 10:02:382008/03/06 10:02:38
27

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic DMR-EX768EB bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic DMR-EX768EB in de taal/talen: Engels als bijlage per email.

De handleiding is 17,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info