607138
83
Verklein
Vergroot
Pagina terug
1/96
Pagina verder
Troubleshooting
SQT0984
83
“0:00” is flashing on the front panel display.
Set the clock. (> 77)
The clock does not display on the unit when
switched to standby.
The clock does not display when “Front Panel
Display” is set to “Automatic”. (> 74)
Screen size is wrong.
Check the “TV Aspect” or Aspect for 4:3 Video”.
(> 75)
Adjust the aspect ratio setting on TV.
Adjust the aspect ratio setting on this unit.
(> 81)
Check “Aspect for Recording” before recording
or file conversion. (> 72)
[BCT650]
TV reception is not displayed.
Broadcast signals are not output from this unit’s
RF OUT terminal. Select “On” in “RF OUT
( CATV Signal )” or “RF OUT ( Aerial Signal )”.
(> 77)
The black screen appears on the TV.
This phenomenon may occur, depending on the
TV setting, when “Quick Start” is activated.
Depending on the TV, this phenomenon may be
prevented by reconnecting to a different HDMI
input terminal.
The screen changes automatically.
If Screen Saver” is set to “On”, the screen saver
function will be activated when there is no
operation for 5 minutes or more. (> 74)
There is a lot of image lag when playing video.
Set to “0” all items in the “Noise Reduction”.
(> 67)
Set “Audio Delay”. (> 74)
The unit’s TV System is different from that of the
disc. Change the TV System. (> 75, TV
System)
The picture may be distorted or a black screen
may appear between scenes recorded with
different aspect ratios.
Set “Deep Colour Output” (> 75) or “Contents
Type Flag” (> 75) to “Off”.
3D video is not output correctly.
3D video may be output correctly by changing
the following settings:
- “3D Type” of “3D Settings” (> 75)
- “Signal Format” (> 43, 3D settings during
playback)
Check the settings of the connected TV.
When a non-3D compatible amplifier/receiver is
connected between this unit and a TV, 3D video
is not output. (> 18)
Displays
TV screen and video
The images do not appear on the TV.
The picture is distorted during play, or video
is not played correctly.
Check the connections. (> 16, 17)
Check the settings of the connected TV, etc.
An incorrect resolution is selected in “HDMI
Video Format”. (> 75) Reset the setting as
follows:
1 While the unit is on, press and hold [OK], the
yellow button and the blue button at the
same time for more than 5 seconds.
“00 RET” is displayed on the front panel
display.
2 Repeatedly press [1] (right) until “04 PRG”
is displayed on the front panel display.
3 Press and hold [OK] for at least 3 seconds.
Set the item again.
When Dolby
®
Digital Plus, Dolby
®
TrueHD,
and DTS-HD
®
audio are not output
properly, select “Yes” in “Default Settings”
and make proper settings. (> 77)
DMR-BST_BCT650EG_eng.book 83 ページ 2015年6月5日 金曜日 午後6時18分
83

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic DMR-BCT650 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic DMR-BCT650 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,18 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Panasonic DMR-BCT650

Panasonic DMR-BCT650 Gebruiksaanwijzing - Deutsch - 96 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info