Handleiding Panasonic DMPBD83EG (pagina 1 van 2) (Duits, Engels)

603006

Verklein

Vergroot

Pagina terug

1/2

Pagina verder

SQT0799

F1214WY0

Thank you for purchasing this product.

Please read these instructions carefully before using

this product, and save this manual for future use.

A more detailed operating instruction is available

in “Operating Instructions (PDF format)”. To read

it, download it from the website.

http://av.jpn.support.panasonic.com/support/

global/cs/bd/oi/index.html

You will need Adobe Reader to browse or print the

Operating Instructions (PDF format).

You can download and install a version of Adobe

Reader that you can use with your OS from the

following website. (As of December 2014)

http://www.adobe.com/products/acrobat/

readstep2.html

When other Panasonic devices respond to the remote

control of the unit, change the remote control code.

1 Turn the unit on and off

2 TV operation buttons

You can operate the Panasonic TV using this

unit’s remote control. Some buttons may not work

depending on the TV.

[Í TV] : Turn the TV on and off

[AV] : Change input

[ijVOL] : Adjust the volume

3 Select title numbers, etc./Enter numbers or

[BDT271/270] [BDT175/174/171/170] characters

4 Cancel

5 Change soundtrack

6 Basic playback control buttons

7 Show Pop-up menu

8 Show Top menu

9 Show Option menu

10 Coloured buttons (red, green, yellow, blue)

Used for various purposes depending on the

display

11 Transmit the remote control signal

12 Open or close the disc tray

13 Show the status messages

[BDT271/270]

Show Miracast

screen

[BDT175/174/171/170] [BDT166/165] [BD833/83]

Switch Secondary Video on/off (Picture-in-picture)

15 Show the Home Screen of the Network Service

16 Exit the Menu screen

17 Show Netflix screen

18 Show HOME menu

19 [3, 4, 2, 1] : Move the highlight for selection

[OK] : Confirm the selection

(;1) : Frame-by-frame

20 Return to previous screen

1 Disc tray

2USB port

3 POWER LED

The LED lights up when the unit is turned on, and

flashes when error occurs.

4 Remote control signal sensor

Distance: Within approx. 7 m

Angle: Approx. 20e up and down, 30e left and right

5 Open or close the disc tray

[BDT271/270] [BDT175/174/171/170]

Stop

7 [BDT271/270] [BDT175/174/171/170]

Start play

8 Standby/on switch (Í/I)

Press to switch the unit from on to standby mode

or vice versa. In standby mode, the unit is still

consuming a small amount of power.

Basic Operating Instructions

Blu-ray Disc

Player

Model No. DMP-BDT271

DMP-BDT270

DMP-BDT175

DMP-BDT174

DMP-BDT171

DMP-BDT170

DMP-BDT166

DMP-BDT165

DMP-BD833

DMP-BD83

Firmware updates

Panasonic is constantly improving the unit’s firmware

to ensure that our customers are enjoying the latest

technology.

Panasonic recommends updating your firmware as

soon as you are notified.

Unless otherwise indicated, illustrations in these

operating instructions are of DMP-BDT271.

Accessories

Check the supplied accessories before using this unit.

1 Remote control

[BDT271/270]

(N2QAYB001031)

[BDT175/174/171/170]

(N2QAYB001030)

[BDT166/165] [BD833/83]

(N2QAYB001029)

2 Batteries for remote control

[BDT271/270] [BDT175/174/171/170]

1 AC mains lead

[BDT166/165] [BD833/83]

1 AC adaptor



≥ Product numbers are provided in these operating instructions

correct as of December 2014. These may be subject to change.

≥ Do not use AC mains lead and AC adaptor with other

equipment.

≥ Do not use any other AC mains lead and AC adaptors except

the supplied one.

Using the remote control

– Insert the batteries to the terminal so that it (i and j)

matches those in the remote control.





R6/LR6, AA

(Alkaline or manganese

batteries)

Control reference guide

abc

jkl

mno

pqrs tuv

wxyz

ㄅㄆㄇ

ㄈㄉㄊ

[BDT175/174/171/170]

[BDT166/165]

[BD833/83]

1 2 3 4

875 6

[BDT271/270]

[BDT175/174/171/170]

[BDT166/165]

[BD833/83]

≥ This unit consumes a small amount of AC power (> “Specifications”) even when turned off in standby mode.

For the purpose of energy conservation, the unit should be disconnected if you will not be using it for

extended period of time.

≥

[BDT166/165] [BD833/83] The unit is in the standby condition when the AC adaptor is connected. The primary circuit

is always “live” as long as the AC adaptor is connected to an electrical outlet.

The following functions may not work depending on the media and contents.

BD-Video: Video

BD-RE: Video, JPEG, MPO*, AAC, ALAC, DSD*,

FLAC, MP3, WAV, WMA

BD-R: Video, MKV, Xvid, AAC, ALAC, DSD*, FLAC,

MP3, WAV, WMA

DVD-Video: Video

DVD-R/DVD-R DL : Video, AVCHD, MKV, Xvid,

JPEG, MPO*, AAC, ALAC, DSD*, FLAC, MP3, WAV,

WMA

DVD-RW/+R/+RW/+R DL : Video, AVCHD

Music CD : Music [CD-DA]

CD-R/CD-RW : MKV, Xvid, JPEG, MPO*, AAC,

ALAC, FLAC, MP3, Music [CD-DA], WAV, WMA

USB devices (up to 4 TB) : MKV, MP4, MPEG2,

Xvid, JPEG, MPO*, AAC, ALAC, DSD*, FLAC, MP3,

WAV, WMA

∫ Region management information

The unit can play back BD-Video/DVD-Video discs of

the following regions codes, including “ALL”:

* [BDT271/270] [BDT175/174/171/170] [BDT166/165] only

Quick Start Guide

STEP 1 : Connecting to a TV

HDMI IN

To a household mains socket

HDMI cable

AC mains lead (supplied)

[BDT271/270]

[BDT175/174/171/170]

[BDT166/165]

[BD833/83]

AC adaptor (supplied)

[BDT271/270]

[BDT175/174/171/170]

[BDT166/165]

[BD833/83]

STEP 2 : Connecting to the network

[BDT271/270]

∫ Wireless LAN connection

Wireless router, etc.

Internet

∫ LAN cable connection

Broadband router, etc.

Internet

LAN Cable

[BDT271/270]

[BDT175/174/171/170]

[BDT166/165]

[BD833/83]

Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.

STEP 3 : Settings

Turn on the TV and select the appropriate video

input.

Press [Í/I].

Follow the on-screen instructions to continue with

the settings.

HDMI

STEP 4 : Playback

Insert the media.

Press [OK] or [3, 4, 2, 1] to select the item.

≥ If there are any other items, repeat this step.

1 2

Operations during playback

Stop Press [∫STOP].

The stopping point is memorized.

Resume play function

Press [1PLAY] to restart from this point.

≥ The point is cleared if the media is removed.

Pause Press [;PAUSE].

Press [;PAUSE] again or [1PLAY] to restart play.

While playing, press [SEARCH6]

or [SEARCH5].

The speed increases up to 5 steps.

≥ Press [1PLAY] to revert to normal playback speed.

Slow motion

While paused, press [SEARCH

Skip

While playing or paused, press

[:] or [9].

Skip to the title, chapter or track.

Playable media

BD-Video

DVD-Video

Example:

≥ Specifications are subject to change without notice.

Unit

To reduce the risk of fire, electric shock or product damage,

≥ Do not expose this unit to rain, moisture, dripping or splashing.

≥ Do not place objects filled with liquids, such as vases, on this unit.

≥ Use only the recommended accessories.

≥ Do not remove covers.

≥ Do not repair this unit by yourself. Refer servicing to qualified service

personnel.

≥ Do not let metal objects fall inside this unit.

≥ Do not place heavy items on this unit.

AC mains lead

To reduce the risk of fire, electric shock or product damage,

≥ Ensure that the power supply voltage corresponds to the voltage

printed on this unit.

≥ Insert the mains plug fully into the socket outlet.

≥ Do not pull, bend, or place heavy items on the lead.

≥ Do not handle the plug with wet hands.

≥ Hold onto the mains plug body when disconnecting the plug.

≥ Do not use a damaged mains plug or socket outlet.

The mains plug is the disconnecting device.

Install this unit so that the mains plug can be unplugged from the socket

outlet immediately.

Unit

≥ This unit utilizes a laser. Use of controls or adjustments or

performance of procedures other than those specified herein may

result in hazardous radiation exposure.

≥ Do not place sources of naked flames, such as lighted candles, on

this unit.

≥ This unit may receive radio interference caused by mobile telephones

during use. If such interference occurs, please increase separation

between this unit and the mobile telephone.

Placement

Place this unit on an even surface.

To reduce the risk of fire, electric shock or product damage,

≥ Do not install or place this unit in a bookcase, built-in cabinet or in

another confined space. Ensure this unit is well ventilated.

≥ Do not obstruct this unit’s ventilation openings with newspapers,

tablecloths, curtains, and similar items.

≥ Do not place the unit on amplifiers/receivers or equipment that may

become hot. The heat can damage the unit.

≥ Do not expose this unit to direct sunlight, high temperatures, high

humidity, and excessive vibration.

Batteries

Mishandling of batteries can cause electrolyte leakage and may cause a

fire.

≥ Danger of explosion if battery is incorrectly replaced. Replace only

with the type recommended by the manufacturer.

≥ When disposing of the batteries, please contact your local authorities

or dealer and ask for the correct method of disposal.

≥ Do not mix old and new batteries or different types at the same time.

≥ Do not heat or expose to flame.

≥ Do not leave the battery(ies) in a car exposed to direct sunlight for a

long period of time with doors and windows closed.

≥ Do not take apart or short circuit.

≥ Do not recharge alkaline or manganese batteries.

≥ Do not use batteries if the covering has been peeled off.

move batteries if you do not intend to use the remote control for a

long period of time. Store in a cool, dark place.

[BDT166/165] [BD833/83]

AC adaptor

The AC adaptor operates on AC between 110 V and 240 V.

But obtain a suitable plug adaptor if the plug does not fit the

AC mains socket.

The following limits are in place regarding the usage of this unit. You

must be aware of these limits before using this unit.

Panasonic will in no way be responsible for any incidental damage

which may arise due to a failure to obey these limits, or to any condition

of use or disuse of this unit.

≥ Data transmitted and received over radio waves may be

intercepted and monitored.

≥ This unit contains delicate electronic components.

Please use this unit in the manner in which it was intended and follow

the following points:

– Do not expose this unit to high temperatures or direct sunlight.

– Do not bend, or subject this unit to strong impacts.

– Keep this unit away from moisture.

– Do not disassemble or alter this unit in any way.

≥ The operation history may be recorded in the memory of this unit.

Disposal of Old Equipment and Batteries

Only for European Union and countries with

recycling systems

These symbols on the products, packaging, and/or

accompanying documents mean that used electrical and

electronic products and batteries must not be mixed with

general household waste.

For proper treatment, recovery and recycling of old products

and used batteries, please take them to applicable

collection points in accordance with your national

legislation.

By disposing of them correctly, you will help to save

valuable resources and prevent any potential negative

effects on human health and the environment.

For more information about collection and recycling, please

contact your local municipality.

Penalties may be applicable for incorrect disposal of this

waste, in accordance with national legislation.

Note for the battery symbol (bottom

symbol):

This symbol might be used in combination with a chemical

symbol. In this case it complies with the requirement set by

the Directive for the chemical involved.

NORSK

Produkt

For å redusere faren for brann, elektrisk støt eller skade på apparatet:

≥ Utsett ikke produktet for regn, fukt, drypping eller sprut.

≥ Ikke plasser objekter som er fylt med væske, som vaser, på

apparatet.

≥ Bruk kun anbefalt tilbehør.

≥ Fjern ikke deksler.

≥ Reparer ikke denne enheten selv, overlat service til kvalifisert

servicepersonell.

Vekselstrømnett

Nettstøpselet er trukket ut fra denne enheten.

Installer denne enheten slik at nettstøpselet umiddelbart kan trekkes fra

stikkontakten.

Produkt

≥ Dette produktet anvender en laser. Betjening av kontroller eller

justering eller andre inngrep enn de beskrevet i denne

bruksanvisning kan føre til farlig bestråling.

≥ Plasser ikke åpen ild, slik som levende lys, oppå apparatet.

≥ Dette apparatet er beregnet for bruk under moderate klimaforhold.

Plassering

For å redusere faren for brann, elektrisk støt eller skade på apparatet:

≥ Ikke plasser apparatet i en bokhylle, et innebygget kabinett eller et

annet lukket sted. Pass på at produktet er godt ventilert.

≥ Apparatets ventilasjonsåpninger må ikke dekkes til med aviser,

duker, gardiner eller lignende.

Firmware updates

Occasionally, Panasonic may release updated

firmware for this unit that may add or improve the

way a feature operates. These updates are

available free of charge.

This unit is capable of checking the firmware

automatically when connected to the Internet via a

broadband connection.

When a new firmware version is available, the

following message is displayed.

You can also download the latest firmware from the

following website and store it to a USB device to

update the firmware.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

DO NOT DISCONNECT the unit from the AC

power or perform any operation while the update

takes place.

After the firmware is installed, unit will restart and

the following screen will be displayed.

e.g.,



≥ To show the firmware version on this unit;

[HOME] > “Setup” > “Player Settings” > “System” >

“System Information” > “Firmware Version Information”

≥ Downloading will require several minutes. It may take

longer or may not work properly depending on the

connection environment.

≥ If you do not want to check for the latest firmware version,

set “Automatic Update Check” to “Off”.

[HOME] > “Setup” > “Player Settings” > “System” >

“Firmware Update”

Firmware Update

Current Version: X.XX

New Version: X.XX

Do you want to start firmware update?

For the update information, please visit the

following website:

http://panasonic.jp/support/global/cs/

Yes No

RETURN

The firmware was updated.

Current Version

x.xx

RETURN

Specifications

Power supply

[BDT271/270] [BDT175/174/171/170]

AC 220 V to 240 V, 50 Hz

[BDT166/165] [BD833/83]

DC 12 V 0.8 A (DC IN terminal)

Power consumption [BDT271/270] [BDT175/174/171/170]

Approx. 13 W

[BDT166/165] [BD833/83]

Approx. 11 W

Power consumption

in standby mode

Approx. 0.5 W

(Quick Start: Off)

Power consumption

in Network standby

mode

[BDT271/270] [BDT175/174/171/170]

Approx. 5.5 W

[BDT166/165] [BD833/83]

Approx. 3.5 W

(Quick Start: On)

Dimensions

(WkHkD)

[BDT271/270] [BDT175/174/171/170]

312 mmk43 mmk180 mm

[BDT166/165] [BD833/83]

245 mmk38.5 mmk175 mm

Mass

[BDT271/270] [BDT175/174/171/170]

Approx. 1.0 kg

[BDT166/165] [BD833/83]

Approx. 0.8 kg

Precautions

WARNING

CAUTION

≥ This unit is intended for use in moderate climates.

[BDT271/270]

Wireless LAN connection

Declaration of Conformity (DoC)

Hereby, “Panasonic Corporation”

declares that this product is in

compliance with the essential

requirements and other relevant provisions of Directive 1999/5/EC.

Customers can download a copy of the original DoC to our R&TTE

products from our DoC server:

http://www.doc.panasonic.de

Contact to Authorised Representative:

Panasonic Marketing Europe GmbH, Panasonic Testing Centre,

Winsbergring 15, 22525 Hamburg, Germany

This product is intended for general consumer. (Category 3)

This product on purpose to connect to access point of 2.4 GHz WLAN.

To dispose or transfer this unit

The unit may keep the user settings information in the unit. If you

discard this unit either by disposal or transfer, then follow the procedure

to return all the settings to the factory presets to delete the user

settings.

1 Turn the unit on.

2 Press and hold [OK], the yellow button and the blue button on the

remote control at the same time for more than 5 seconds.

– POWER LED starts to flash, and “00 RET” is displayed on the

screen.

3 Press [1] (right) repeatedly on the remote control until “08 FIN” is

displayed on the screen.

4 Press and hold [OK] for more than 5 seconds.

ADVARSEL

FORSIKTIG

LASER-spesifikasjon

Klasse 1 LASER-produkt:

Bølgelengde : 790 nm (CD)/660 nm (DVD)/405 nm (BD)

Laserstyrke : Ingen farlig stråling sendes ut

Copyrights and Trademarks

This product uses Cinavia technology to limit the use of unauthorized

copies of some commercially-produced film and videos and their

soundtracks. For details, refer to the operating instructions (PDF

format).

“AVCHD” is a trademark of Panasonic Corporation and Sony

Corporation.

Java is a registered trademark of Oracle and/or its affiliates.

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby Laboratories.

For DTS patents, see http://patents.dts.com. Manufactured under

license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS

and the Symbol together are registered trademarks, and DTS-HD

Reserved.

HDMI, the HDMI Logo, and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing LLC in the

United States and other countries.

This product is licensed under the AVC patent portfolio license and VC-1

patent portfolio license for the personal and non-commercial use of a

consumer to (i) encode video in compliance with the AVC Standard and

VC-1 Standard (“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1 Video

that was encoded by a consumer engaged in a personal and non-

commercial activity and/or was obtained from a video provider licensed

to provide AVC/VC-1 Video. No license is granted or shall be implied for

any other use. Additional information may be obtained from MPEG LA,

LLC.

See http://www.mpegla.com.

MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS

and Thomson.

“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.

The Wi-Fi CERTIFIED

Logo is a certification mark of the Wi-Fi Alliance

The Wi-Fi Protected Setup

Identifier mark is a certification mark of

Wi-Fi Alliance

“Wi-Fi

” and “Wi-Fi Direct

” are registered trademarks of Wi-Fi

Alliance

“Wi-Fi Protected Setup

”, “Miracast

”, “WPA

”, and “WPA2

” are

trademarks of Wi-Fi Alliance

DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service

marks, or certification marks of the Digital Living Network Alliance.

Windows is a trademark or a registered trademark of Microsoft

Corporation in the United States and other countries.

Android is a trademark of Google Inc.

is a Verance

Corporation trademark. Protected by U.S. Patent 7,369,677 and

worldwide patents issued and pending under license from Verance

This product incorporates the following software:

(1) the software developed independently by or for Panasonic Corporation,

(2) the software owned by third party and licensed to Panasonic Corporation,

(3) the software licensed under the GNU General Public License,

Version 2.0 (GPL V2.0),

(4) the software licensed under the GNU LESSER General Public

License, Version 2.1 (LGPL V2.1), and/or

(5) open source software other than the software licensed under the

GPL V2.0 and/or LGPL V2.1.

The software categorized as (3) - (5) are distributed in the hope that it

will be useful, but WITHOUT ANY WARRANTY, without even the

implied warranty of MERCHANTABILITY or FITNESS FOR A

PARTICULAR PURPOSE. Please refer to the detailed terms and

conditions thereof shown in the Player Settings menu.

At least three (3) years from delivery of this product, Panasonic will give

to any third party who contacts us at the contact information provided

below, for a charge no more than our cost of physically performing

source code distribution, a complete machine-readable copy of the

corresponding source code covered under GPL V2.0, LGPL V2.1 or the

other licenses with the obligation to do so, as well as the respective

Contact Information: oss-cd-request@gg.jp.panasonic.com

The source code and the copyright notice are also available for free in

our website below.

http://panasonic.net/avc/oss/

David M. Gay’s dtoa and strtod license

The author of this software is David M. Gay.

Permission to use, copy, modify, and distribute this software for any

purpose without fee is hereby granted, provided that this entire notice is

included in all copies of any software which is or includes a copy or

modification of this software and in all copies of the supporting

documentation for such software.

THIS SOFTWARE IS BEING PROVIDED “AS IS”, WITHOUT ANY

EXPRESS OR IMPLIED WARRANTY. IN PARTICULAR, NEITHER THE

AUTHOR NOR LUCENT MAKES ANY REPRESENTATION OR

WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY OF

THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.

“UNICODE, INC. LICENSE AGREEMENT - DATA FILES AND

SOFTWARE

Unicode Data Files include all data files under the directories

http://www.unicode.org/Public/, http://www.unicode.org/reports/,

and http://www.unicode.org/cldr/data/.

Unicode Software includes any source code published in the Unicode

Standard or under the directories

http://www.unicode.org/Public/,

http://www.unicode.org/reports/, and

http://www.unicode.org/cldr/data/.

NOTICE TO USER: Carefully read the following legal agreement. BY

DOWNLOADING, INSTALLING, COPYING OR OTHERWISE USING

UNICODE INC.’S DATA FILES (““DATA FILES””), AND/OR

SOFTWARE (““SOFTWARE””), YOU UNEQUIVOCALLY ACCEPT,

AND AGREE TO BE BOUND BY, ALL OF THE TERMS AND

CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT AGREE, DO

NOT DOWNLOAD, INSTALL, COPY, DISTRIBUTE OR USE THE

DATA FILES OR SOFTWARE.

under the Terms of Use in

http://www.unicode.org/copyright.html.

Permission is hereby granted, free of charge, to any person obtaining a

copy of the Unicode data files and any associated documentation (the

““Data Files””) or Unicode software and any associated documentation

(the ““Software””) to deal in the Data Files or Software without

restriction, including without limitation the rights to use, copy, modify,

merge, publish, distribute, and/or sell copies of the Data Files or

Software, and to permit persons to whom the Data Files or Software are

furnished to do so, provided that (a) the above copyright notice(s) and

this permission notice appear with all copies of the Data Files or

Software, (b) both the above copyright notice(s) and this permission

notice appear in associated documentation, and (c) there is clear notice

in each modified Data File or in the Software as well as in the

documentation associated with the Data File(s) or Software that the

data or software has been modified.

THE DATA FILES AND SOFTWARE ARE PROVIDED ““AS IS””,

WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,

INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT

SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN

THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL

INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES

WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR

PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE

OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN

CONNECTION WITH THE USE OR PERFORMANCE OF THE DATA

FILES OR SOFTWARE.

Except as contained in this notice, the name of a copyright holder shall

not be used in advertising or otherwise to promote the sale, use or other

dealings in these Data Files or Software without prior written

authorization of the copyright holder.”

(1) MS/WMA

This product is protected by certain intellectual property rights of

Microsoft Corporation and third parties. Use or distribution of such

technology outside of this product is prohibited without a license from

Microsoft or an authorized Microsoft subsidiary and third parties.

(2) MS/PlayReady/Final Product Labeling

This product contains technology subject to certain intellectual property

rights of Microsoft. Use or distribution of this technology outside of this

product is prohibited without the appropriate license(s) from Microsoft.

(3) MS/PlayReady/End User Notices

Content owners use Microsoft PlayReady™ content access technology

to protect their intellectual property, including copyrighted content. This

device uses PlayReady technology to access PlayReady-protected

content and/or WMDRM-protected content. If the device fails to

properly enforce restrictions on content usage, content owners may

require Microsoft to revoke the device’s ability to consume PlayReady-

protected content. Revocation should not affect unprotected content or

content protected by other content access technologies. Content

owners may require you to upgrade PlayReady to access their content.

If you decline an upgrade, you will not be able to access content that

requires the upgrade.

(4) FLAC, WPA Supplicant

The software licenses are displayed when “Software Licence” in the

Setup menu is selected.*

*[HOME] > “Setup” > “Player Settings” > “System” > “System

Information”

(Inside of product)

(Produktets innside)

[BDT271/270]

[BDT175/174/171/170]

[BDT166/165] [BD833/83]

Manufactured by:

Importer for Europe:

Panasonic Corporation

Kadoma, Osaka, Japan

Panasonic Marketing Europe GmbH

Panasonic Testing Centre

Winsbergring 15, 22525 Hamburg, Germany

Panasonic Corporation

Web Site: http://panasonic.net

C Panasonic Corporation 2014

English

Deutsch

until

2014/12/31

SQT0754~basic_mst.fm 1 ページ２０１４年１２月１１日　木曜日　午後４時３３分

Panasonic DMPBD83EG Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Panasonic DMPBD83EG

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info