68869
59
Verklein
Vergroot
Pagina terug
1/66
Pagina verder
116 VQT1Z93 VQT1Z93 117
Try checking these items (P.116 - 121) first.
(Restoring menu settings to default values may solve certain problems.
Try using ‘RESET’ in SETUP menu in recording mode (P.24).)
Q&A
Troubleshooting
Battery, power
Camera does not work even if power is turned on.
Battery is not inserted correctly (P.15), or needs recharging (P.13).
LCD monitor shuts off even if power is turned on.
Camera is set to ‘POWER SAVE’ or ‘AUTO LCD OFF’ (P.23).
Press shutter button halfway to release.
Battery needs recharging.
Camera switches off as soon as power is turned on.
Battery needs recharging.
Camera is set to ‘POWER SAVE’. (P.23)
Press shutter button halfway to release.
This unit is turned off automatically.
If you connect to a TV compatible with VIERA Link with an HDMI mini cable (optional)
and turn off the power on the TV with the remote control for the TV, the power on this
unit also turns off.
If you are not using VIERA Link, set ‘VIERA Link’ to ‘OFF’. (P.26)
Recording
Cannot record pictures.
REC/PLAY switch is not set to (record).
Built-in memory/card is full. Free space by deleting unwanted pictures (P.41).
Cannot record to cards.
Do not format cards on other equipment.
Please format cards with this camera. (P.26)
For details about compatible cards, see P.16.
Recording capacity is low.
Battery needs recharging .
Use a fully charged battery (not sold pre-charged). (P.13)
If you leave the camera on, the battery will be exhausted. Turn the camera off
frequently by using ‘POWER SAVE’ or ‘AUTO LCD OFF’ (P.23) etc.
Please check the recording picture capacity for cards and built-in memory. ( P.124,
P.126)
Recorded pictures look white.
Lens is dirty (fingerprints, etc.).
Turn on power to extract lens barrel, and clean lens surface with a soft, dry cloth.
Lens is foggy (P.10).
Recorded pictures are too bright/too dark.
Pictures taken in dark locations, or bright subjects (snow, bright conditions,
etc.) occupy most of the screen. (Brightness of LCD monitor may differ from
that of actual picture) Adjust the exposure (P.49).
‘MIN. SHTR SPEED’ is set to fast speeds, e.g. ‘1/250’ (P.78).
2-3 pictures are taken when I press the shutter button just once.
Camera set to use ‘AUTO BRACKET’ (P.49), ‘MULTI ASPECT (P.50), ‘BURST’
(P.76), or the ‘HI-SPEED BURST’ (P.56) or ‘FLASH BURST’ (P.57) scene modes.
Recording (continued)
Focus not aligned correctly.
Not set to mode appropriate for distance to subject. (Focus range varies according to recording mode.)
Subject outside of focus range.
Caused by jitter or subject movement (P.70, 77).
Recorded pictures are blurred. Optical image stabilizer ineffective.
Shutter speed is slower in dark locations and Optical image stabilizer is less effective.
Hold camera firmly with both hands, keeping arms close to body.
Use a tripod and the self-timer (P.48) when using slower shutter speed with ‘MIN. SHTR SPEED’.
Cannot use ‘AUTO BRACKET’ or ‘MULTI ASPECT ’.
Only enough memory for 2 pictures or fewer.
Recorded pictures appear coarse, or there is interference.
ISO sensitivity is high, or shutter speed is low.
(Default SENSITIVITY setting is ‘AUTO’ – interference may appear with indoor pictures.)
Lower ‘SENSITIVITY’ (P.71).
Set ‘COLOR MODE’ to ‘NATURAL (P.77)
Take pictures in brighter locations.
Camera set to ‘HIGH SENS.’ or ‘HI-SPEED BURST’ scene modes.
(Picture becomes slightly coarser in response to high sensitivity)
Pictures appear dark or have poor colouring.
Colours may appear unnatural due to the effects of light source.
Use WHITE BALANCE to adjust the colouring. (P.72)
Brightness or colouring of recorded picture different from real life.
Taking pictures under fluorescent lighting may require a faster shutter speed and
result in slightly changed brightness or colouring, but this is not a fault.
Reddish vertical line (smear) appears during recording.
This is a characteristic of CCD and may appear if subject contains
brighter areas. Some blurring may occur around these areas, but this is
not a fault. This will be recorded in motion pictures, but not in still pictures.
We recommend keeping the screen away from strong light sources such
as sunlight when taking pictures.
Motion picture recording stops midway.
Using MultiMediaCard (not compatible with motion picture recording).
Using a card of SD speed ‘Class 6’ or above is recommended for recording motion pictures.
The SD speed class is a speed rating for continuous writing.
Using a high-speed card with a specified speed (e.g. on packaging) of at least 10
MB/s is recommended when ‘REC QUALITY’ is set to ‘HD’, ‘WVGA’, or ‘VGA’.
If recording stops even when using a ‘Class 6’ card or card with speed of ‘10 MB/s’
or faster, the data writing speed is low. We recommend backing up the data on the
memory card and reformatting it (P.26).
With some cards, access display may appear briefly after recording, and recording
may end midway.
The subject cannot be locked. (AF track fails)
If the subject has different colours as the periphery, set the AF area to those colours
specific to the subject by aligning that area with the AF area. (P.73)
59

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Panasonic-DMC-TZ6

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic DMC-TZ6 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic DMC-TZ6 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Panasonic DMC-TZ6

Panasonic DMC-TZ6 Gebruiksaanwijzing - Nederlands - 64 pagina's

Panasonic DMC-TZ6 Gebruiksaanwijzing - Deutsch - 64 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info