61596
46
Verklein
Vergroot
Pagina terug
1/144
Pagina verder
Advanced
46
VQT0Y44
n Adjusting flash output
Adjust the flash output when the subject is
small or reflection ratio is extremely high or
low.
1
Press e [C] several times until
[ FLASH] appears and then
press w/q to set the flash output.
• You can adjust from [-2 EV] to [+2 EV]
in steps of [1/3 EV].
• Select [0 EV] to return to the original
flash output.
2
Press [MENU/SET] to finish.
You can also press the shutter
button halfway to finish.
• When the flash output is adjusted, the
flash output value appears on the upper
left of the screen.
• The flash output setting is memorized
even if the camera is turned off.
• In Auto mode [0], motion picture
mode [i], and [SCENERY] (P63),
[NIGHT SCENERY] (P64),
[FIREWORKS] (P66), [STARRY SKY]
(P67), [AERIAL PHOTO] (P68) or
[HIGH SENS.] (P68) in scene mode,
you cannot adjust the flash output.
• Do not look directly at the flash at
close range when it is activated.
• Do not bring the flash too close to
objects or close the flash while it is
activated. The objects may be
discolored by its heat or lighting.
• Do not cover the photo flash with your
fingers or any other items.
In economy mode, the LCD monitor
turns off and the status indicator blinks
while the flash is charged. [This does
not happen when using the AC adaptor
(DMW-AC5; optional).]
If the remaining battery power is low,
the length of time that the LCD monitor
turns off to charge may become longer.
The flash icon turns red when activating the
flash and pressing the shutter button halfway.
• When the jitter alert appears, we
recommend using a tripod.
• When you take a picture beyond the
available flash range, the exposure may
not be adjusted properly and the picture
may become bright or dark.
When taking a picture with the flash, the white
balance will be automatically adjusted [except
for [
x
] (Daylight), [ ] (Flash)], but the
white balance may not be properly adjusted if
the photo flash is insufficient. (P82)
• When the shutter speed is fast, the flash
effect may not be sufficient.
• When you repeat taking a picture,
recording may be disabled even if the
flash is activated. Take a picture after the
access indication disappears.
When the flash is being charged, the flash icon
blinks red, and you cannot take a picture even
when you press the shutter button fully.
Do not close the flash immediately after
using a secondary light source, for example
AUTO/Red-eye reduction [
s
]. Doing
so can damage the camera.
The red-eye reduction effect differs between
people. Also, if the subject was far away
from the camera or was not looking at the
first flash, the effect may not be evident.
• When you set burst mode or auto bracket,
only 1 picture is recorded for every flash
activated.
• You can extend the shutter speed by up to
1/8 by using exposure compensation.
Sand or seawater may cause the camera to
malfunction. Make sure that sand or seawater
does not come in touch with the flash.
MENU
FLASH
SELECT EXIT
46

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Panasonic-DMC-LX2

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic DMC-LX2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic DMC-LX2 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Panasonic DMC-LX2

Panasonic DMC-LX2 Gebruiksaanwijzing - Nederlands - 136 pagina's

Panasonic DMC-LX2 Gebruiksaanwijzing - Deutsch - 136 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info