502086
8
Verklein
Vergroot
Pagina terug
1/100
Pagina verder
EB
Web Site: http://www.panasonic-europe.com
Model number suffix “EB” denotes UK model.
Basic Operating Instructions
Digital Camera/
Lens Kit/Body
Model No. DMC-GH3A/DMC-GH3H
DMC-GH3
Please read these instructions carefully before using this product,
and save this manual for future use.
More detailed
instructions on
the operation of
this camera are contained in
“Operating Instructions for
advanced features (PDF
format)” in the supplied
CD-ROM. Install it on your PC
to read it.
until
2013/1/28
VQT4M51
F1012SM0
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 1 ページ 2012年10月25日 木曜日 午後5時25分
2
VQT4M51 (ENG)
Dear Customer,
We would like to take this opportunity to thank you for purchasing this Panasonic Digital
Camera. Please read these Operating Instructions carefully and keep them handy for
future reference. Please note that the actual controls and components, menu items, etc. of
your Digital Camera may look somewhat different from those shown in the illustrations in
these Operating Instructions.
Carefully observe copyright laws.
Recording of pre-recorded tapes or discs or other published or broadcast material for purposes
other than your own private use may infringe copyright laws. Even for the purpose of private
use, recording of certain material may be restricted.
Information for Your Safety
Product identification marking
WARNING:
To reduce the risk of fire, electric shock or product damage,
Do not expose this unit to rain, moisture, dripping or splashing.
Use only the recommended accessories.
Do not remove covers.
Do not repair this unit by yourself. Refer servicing to qualified service personnel.
The socket outlet shall be installed near the equipment and shall be easily accessible.
Product Location
Digital Camera Bottom
Battery charger Bottom
Pursuant to the applicable EU legislation
Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Germany
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 2 ページ 2012年10月25日 木曜日 午後5時25分
3
(ENG) VQT4M51
About the battery pack
Do not heat or expose to flame.
Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with
doors and windows closed.
Declaration of Conformity (DoC)
Hereby, “Panasonic Corporation” declares that this product is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
Customers can download a copy of the original DoC to our R&TTE products from our
DoC server:
http://www.doc.panasonic.de
Contact to Authorized Representative:
Panasonic Marketing Europe GmbH, Panasonic Testing Centre, Winsbergring 15,
22525 Hamburg, Germany
This product is intended for general consumer. (Category 3)
This product on purpose to connect to access point of 2.4 GHz WLAN.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the type
recommended by the manufacturer.
When disposing the batteries, please contact your local authorities or dealer and ask for the
correct method of disposal.
Warning
Risk of fire, explosion and burns. Do not disassemble, heat above 60 xC or incinerate.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 3 ページ 2012年10月25日 木曜日 午後5時25分
4
VQT4M51 (ENG)
About the battery charger
The battery charger is in the standby condition when the AC power supply cord is connected.
The primary circuit is always “live” as long as the power cord is connected to an electrical
outlet.
Cautions for Use
Always use a genuine Panasonic remote shutter (DMW-RSL1: optional).
Do not use the synchro cables with the length of 3 m (9.8 feet) or more.
CAUTION!
To reduce the risk of fire, electric shock or product damage,
Do not install or place this unit in a bookcase, built-in cabinet or in another confined
space. Ensure this unit is well ventilated.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 4 ページ 2012年10月25日 木曜日 午後5時25分
5
(ENG) VQT4M51
Information for Users on Collection and Disposal of Old Equipment and used
Batteries
These symbols on the products, packaging, and/or accompanying
documents mean that used electrical and electronic products and
batteries should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used
batteries, please take them to applicable collection points, in accordance
with your national legislation and the Directives 2002/96/EC and 2006/
66/EC.
By disposing of these products and batteries correctly, you will help to
save valuable resources and prevent any potential negative effects on
human health and the environment which could otherwise arise from
inappropriate waste handling.
For more information about collection and recycling of old products and
batteries, please contact your local municipality, your waste disposal
service or the point of sale where you purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in
accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact
your dealer or supplier for further information.
[Information on Disposal in other Countries outside the European
Union]
These symbols are only valid in the European Union. If you wish to
discard these items, please contact your local authorities or dealer and
ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In
this case it complies with the requirement set by the Directive for the
chemical involved.
Cd
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 5 ページ 2012年10月25日 木曜日 午後5時25分
6
VQT4M51 (ENG)
Contents
Information for Your Safety................. 2
Preparation
Reading the Operating Instructions
(PDF format) ......................................... 8
Care of the camera .............................. 9
Accessories........................................ 10
Names and Functions of
Components....................................... 14
Preparation......................................... 18
• Changing the Lens........................ 18
• Attaching the Shoulder Strap ........ 18
• Charging the Battery ..................... 19
• Inserting/Removing the Battery..... 20
• Inserting/Removing the Card
(Optional) ...................................... 20
• Formatting the card
(initialisation)................................. 21
• Setting Date/Time (Clock Set)....... 21
• Using the Viewfinder ..................... 22
Setting the Menu................................ 23
• Setting menu items ....................... 23
Calling frequently-used menus
instantly (Quick Menu) ...................... 24
Assigning frequently used functions
to the buttons (function buttons) ..... 25
Basic
Taking a Still picture.......................... 26
Recording Motion Picture................. 27
Switching the Information Displayed
on the recording screen.................... 28
Playing Back Pictures/Motion
Pictures............................................... 29
• Playing Back Pictures ................... 29
• Playing Back Motion Pictures........ 31
• Changing the information displayed
on the playback screen................. 32
Deleting Pictures ............................... 33
Recording
Selecting the Recording Mode.......... 34
Taking Pictures with Your Favourite
Settings (Programme AE Mode) ....... 35
Taking Pictures by Specifying the
Aperture/Shutter Speed..................... 36
• Aperture-Priority AE Mode............. 36
• Shutter-Priority AE Mode............... 36
• Manual Exposure Mode................. 37
• Confirm the Effects of Aperture and
Shutter Speed (Preview Mode) ..... 38
Taking Pictures that match the
Scene being recorded
(Scene Guide Mode)........................... 38
Taking Pictures with different image
effects (Creative Control Mode)........ 39
• [One Point Color] ........................... 39
Taking Pictures using the Automatic
Function (Intelligent Auto Mode) ...... 40
• Taking a picture with a blurred
background (Defocus Control) ...... 40
• Recording images by changing
the brightness or colour tone
(Intelligent Auto Plus Mode) .......... 41
Registering your preferred settings
(Custom Mode) ................................... 42
• Registering Personal Menu Settings
(Registering custom settings)........ 42
• Recording using registered custom
set ................................................. 42
Taking Pictures with the Zoom ......... 43
Taking pictures by using the
flash..................................................... 43
• Changing Flash Mode ................... 44
Compensating the Exposure ............ 44
Setting the Light Sensitivity.............. 45
Adjusting the White Balance............. 46
Taking Pictures with Auto Focus...... 48
• About the focus mode
(AFS/AFF/AFC)............................. 49
• Type of the Auto Focus Mode........ 49
Taking Pictures with Manual
Focus................................................... 51
Fixing the Focus and the Exposure
(AF/AE Lock)....................................... 52
Taking Pictures using Burst Mode ... 53
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 6 ページ 2012年10月25日 木曜日 午後5時25分
7
(ENG) VQT4M51
Taking Pictures using Auto
Bracket................................................ 54
Taking Pictures with the Self-timer .... 55
Recording Motion Picture ................. 55
• Recording while monitoring camera
images .......................................... 55
• Checking the sound while recording
motion pictures.............................. 55
Recording still pictures while
recording motion pictures ................ 56
Recording motion pictures with
manually set aperture value/
shutter speed (Creative Video
Mode) .................................................. 56
• Motion pictures in slow and fast
motion ........................................... 57
• Minimizing operational sounds
during motion picture recording .... 57
Setting the recording method of
time code ............................................ 58
Wi-Fi
What you can do with the Wi-Fi
R
function............................................... 59
[Remote Shooting]............................. 60
• Installing the smartphone/
tablet app “LUMIX LINK............... 60
• Connecting to a smartphone/
tablet ............................................. 60
• Taking pictures via a smartphone/
tablet (remote recording)............... 61
• Playing back pictures in the
camera.......................................... 62
• Sending location information to the
camera from a smartphone/
tablet ............................................. 62
• [Select a destination from
History].......................................... 62
• [Select a destination from
Favorite] ........................................ 62
Selecting the connection method .... 63
• Connecting via a wireless access
point .............................................. 63
• Connecting directly........................ 65
[Playback on TV] ................................ 66
• Displaying the picture on TV right
after taking it/Displaying the picture
on TV by playing it back on the
camera .......................................... 66
[Send Images While Recording] ....... 67
• When sending images to
smartphone/tablet.......................... 67
• When sending images to PC ......... 68
• When sending images to
[Cloud Sync. Service] .................... 69
• When sending images to WEB
Service .......................................... 69
• When sending images to AV
device............................................70
[Send Images Stored in the
Camera]............................................... 71
• When sending images to
smartphone/tablet.......................... 71
• When sending images to PC ......... 72
• When sending images to
[Cloud Sync. Service] .................... 72
• When sending images to WEB
Service .......................................... 73
• When sending images to AV
device............................................74
• When sending images to Printer ... 75
Connecting to other equipment
Playing Back Pictures on a TV
Screen .................................................76
Saving still pictures and motion
pictures on your PC ........................... 77
• About the supplied software .......... 77
Printing the Pictures .......................... 80
Others
Monitor Display/Viewfinder Display... 81
Menu list..............................................83
• [Rec] ..............................................83
• [Motion Picture].............................. 85
• [Custom] ........................................86
• [Setup] ........................................... 88
• [Playback] ...................................... 90
Cautions for Use................................. 91
Specifications .....................................93
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 7 ページ 2012年10月25日 木曜日 午後5時25分
8
Preparation
VQT4M51 (ENG)
Reading the Operating Instructions (PDF format)
More detailed instructions on the operation of this camera are contained in
“Operating Instructions for advanced features (PDF format)” in the supplied
CD-ROM. Install it on your PC to read it.
For Windows
1
Turn the PC on and insert the CD-ROM containing the Operating
Instructions (supplied).
2
Select the desired language and then click
[Operating Instructions] to install.
3
Double click the “Operating Instructions”
shortcut icon on the desktop.
When the Operating Instructions (PDF format) will not open
You will need Adobe Acrobat Reader 5.0 or later or Adobe Reader 7.0 or later to browse or
print the Operating Instructions (PDF format).
Insert the CD-ROM containing the Operating Instructions (supplied), click A and then
follow the messages on the screen to install.
(Compatible OS: Windows XP SP3/Windows Vista SP2/Windows 7)
You can download and install a version of Adobe Reader that you can use with your OS from
the following Web Site.
http://get.adobe.com/reader/otherversions
To uninstall the Operating Instructions (PDF format)
Delete the PDF file from the “Program Files\Panasonic\Lumix\” folder.
For Mac
1
Turn the PC on and insert the CD-ROM containing the Operating
Instructions (supplied).
2
Open the “Manual” folder in the CD-ROM and then copy the PDF file
with the desired language inside the folder.
3
Double click the PDF file to open it.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 8 ページ 2012年10月25日 木曜日 午後5時25分
9
Preparation
(ENG) VQT4M51
Care of the camera
Do not subject to strong vibration, shock, or pressure.
The lens, monitor, or external case may be damaged if used in the following conditions.
It may also malfunction or image may not be record if you:
Drop or hit the camera.
Press hard on the lens or the monitor.
The dust- and splash-proofing of this unit is not a guarantee of a full protection against the
intrusion of dust and water. Please note the following to optimise the dust-proof and
splash-proof performance:
Use a Panasonic interchangeable lens that supports the dust- and splash-proof design.
When you are using an interchangeable lens that does not support the dust-splash proofing
or are using the mount adaptor (DMW-MA1: optional), the dust-splash proofing of this unit is
disabled.
Use with the built-in flash closed.
Securely close each door part, socket cap and terminal cover of this unit.
When you attach/detach the lens or cap, or open/close the door, make sure to prevent sand,
dust, and water droplets from entering the interior of this unit.
If this unit is exposed to water or other liquids, wipe off the liquid with soft dry cloths after use.
Do not place your hands inside the mount of the digital camera body. Since the
sensor unit is a precision apparatus, it may cause a malfunction or damage.
About Condensation (When the lens, the viewfinder or monitor is fogged up)
Condensation occurs when the ambient temperature or humidity changes. Be careful of
condensation since it causes lens, viewfinder and monitor stains, fungus and camera
malfunction.
If condensation occurs, turn the camera off and leave it for about 2 hours. The fog will
disappear naturally when the temperature of the camera becomes close to the ambient
temperature.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 9 ページ 2012年10月25日 木曜日 午後5時25分
10
Preparation
VQT4M51 (ENG)
Accessories
Check that all the accessories are supplied before using the camera.
Product numbers correct as of October 2012. These may be subject to change.
Digital Camera Body
(This is referred to as camera body in these operating
instructions.)
(±: Included, —: Not included)
6Battery Pack
(Indicated as battery pack or battery in the text)
Charge the battery before use.
7 Battery Charger
(Indicated as battery charger or charger in the text)
8 AC Mains Lead
9 USB Connection Cable
10 CD-ROM
Software:
Use it to install the software to your PC.
11 CD-ROM
Operating Instructions for advanced features:
Use it to install to your PC.
12 Shoulder Strap
13 Hot shoe cover
¢3
¢1 This is referred to as lens in these operating instructions.
¢2 This is attached to the interchangeable lens at the time of purchase.
¢3 This is attached to the camera body at the time of purchase.
¢4 The interchangeable lens (H-HS12035) included in DMC-GH3A is dust- and splash-proof.
¢5 The interchangeable lens (H-VS014140) included in DMC-GH3H is not dust- and
splash-proof.
DMC-GH3A DMC-GH3H DMC-GH3
1 Interchangeable Lens
¢1
± (H-HS12035)
¢4
± (H-VS014140)
¢5
2 Lens Hood
±±
3 Lens Cap
±
¢2
±
¢2
4 Lens Rear Cap ±
¢2
±
¢2
5 Body Cap
±
¢3
±
¢3
±
¢3
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 10 ページ 2012年10月25日 木曜日 午後5時25分
11
Preparation
(ENG) VQT4M51
SD Memory Card, SDHC Memory Card and SDXC Memory Card are indicated as card in the
text.
The card is optional.
Description in these operating instructions is based on the interchangeable lens (H-HS12035).
[The lens kit that includes the interchangeable lens (H-HS12035) is not commercially available
in some regions.]
Consult the dealer or Panasonic if you lose the supplied accessories. (You can purchase the
accessories separately.)
VKF4971
DMC-GH3A DMC-GH3H DMC-GH3
1
2
3
4
5
VYC0997VYC1084
VYF3250
VFC4315VFC4605
VKF4971
VKF4971
H-VS014140
VYF3480
H-HS12035
6
7
K1HY08YY0025
8
9
10
VFF1067
11
12
DMW-BLF19E
DMW-BTC10E
VFC4908
13
K2CT3YY00034
VYF3522
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 11 ページ 2012年10月25日 木曜日 午後5時25分
12
Preparation
VQT4M51 (ENG)
Sales and Support Information
Customer Communications Centre
For customers within the UK: 0844 844 3899
For customers within Ireland: 01 289 8333
For further support on your product, please visit our website:
www.panasonic.co.uk
Direct Sales at Panasonic UK
Order accessory and consumable items for your product with ease and confidence by phoning
our Customer Communications Centre
Monday–Thursday 9:00 a.m.–5:30 p.m.,
Friday 9:30 a.m.–5:30 p.m. (Excluding public holidays)
Or go on line through our Internet Accessory ordering application at www.pas-europe.com.
Most major credit and debit cards accepted.
All enquiries transactions and distribution facilities are provided directly by Panasonic UK.
It couldn’t be simpler!
Also available through our Internet is direct shopping for a wide range of finished products.
Take a browse on our website for further details.
Optional Accessories
Lithum Ion Battery DMW-BLF19
Battery Charger DMW-BTC10
AC Adaptor
¢1
DMW-AC8
DC Coupler
¢1
DMW-DCC12
Battery Grip DMW-BGGH3
Flash DMW-FL360L, DMW-FL220, DMW-FL360, DMW-FL500
Stereo Shotgun Microphone DMW-MS2
Remote Shutter DMW-RSL1
MC Protector DMW-LMCH58
¢2
, DMW-LMCH62
¢3
ND Filter DMW-LND58
¢2
, DMW-LND62
¢3
PL Filter (Circular Type) DMW-LPL58
¢2
, DMW-LPL62
¢3
Lens Cap DMW-LFC58
¢2
, DMW-LFC62
¢3
Lens Rear Cap DMW-LRC1
Body Cap DMW-BDC1
Zoom Lever DMW-ZL1
Tripod Adaptor
¢4
DMW-TA1
USB connection Cable DMW-USBC1
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 12 ページ 2012年10月25日 木曜日 午後5時25分
13
Preparation
(ENG) VQT4M51
Some optional accessories may not be available in some countries.
¢1 The AC Adaptor (optional) can only be used with the designated Panasonic DC Coupler
(optional). The AC adaptor (optional) cannot be used by itself.
¢2 When the interchangeble lens (H-HS12035) is used
¢3 When the interchangeble lens (H-VS014140) is used
¢
4 Use if the attached lens is in contact with the tripod pedestal.
AV Cable DMW-AVC1
HDMI mini Cable RP-CDHM15, RP-CDHM30
Interchangeable Lens
H-PS45175, H-PS14042, H-VS014140, H-HS35100,
H-HS12035, H-FS45150, H-FS100300, H-FS045200,
H-FS014042, H-FS014045, H-F007014, H-F008,
H-ES045, H-X025, H-H020, H-H014
The 3D Interchangeable Lens H-FT012
Mount Adaptor DMW-MA1, DMW-MA2M, DMW-MA3R
Class 10 64 GB SDXC Memory Card
Class 10 32 GB SDHC Memory Card
Class 10 16 GB SDHC Memory Card
Class 10 8 GB SDHC Memory Card
Class 10 4 GB SDHC Memory Card
Class 4 32 GB SDHC Memory Card
Class 4 16 GB SDHC Memory Card
Class 4 8 GB SDHC Memory Card
Class 4 4 GB SDHC Memory Card
Class 4 2 GB SD Memory Card
RP-SDUB64GAK
RP-SDA32GE1K/RP-SDUB32GAK/RP-SDRB32GAK
RP-SDA16GE1K/RP-SDUB16GAK/RP-SDRB16GAK
RP-SDA08GE1K/RP-SDUB08GAK/RP-SDRB08GAK
RP-SDRB04GAK
RP-SDLB32GAK
RP-SDLB16GAK
RP-SDLB08GAK
RP-SDLB04GAK
RP-SDLB02GAK
This unit is compatible with UHS-I
standard SDHC/SDXC memory
cards.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 13 ページ 2012年10月25日 木曜日 午後5時25分
14
Preparation
VQT4M51 (ENG)
Names and Functions of Components
Camera body
1 Shutter button (P26)
2 Self-timer indicator (P55)/
AF Assist Lamp
3 Sensor
4 Flash (P43)
5 Flash synchro socket
¢
6 Lens fitting mark
7 Mount
8 Lens lock pin
9 Lens release button (P18)
10 [(] (Playback) button (P29)
11 [LVF] button (P22)/[Fn5] button (P25)
12 Viewfinder (P22)
13 Eye Cup
¢
(P92)
14 Eye sensor (P22)
15 Diopter adjustment dial (P22)
16 [AF/AE LOCK] button (P52)
17 Focus mode lever (P48)
18 Rear dial
19 Motion picture button (P27)
20 Speaker
Be careful not to cover the speaker with your
finger. Doing so may make sound difficult to
hear.
21 Touch screen/monitor (P17)
22 [Q.MENU] button (P24)/[Fn2] button (P25)
23 [ ] (Auto Focus Mode) button (P48)/
[Fn3] button (P25)
24 [ ] (Delete/Cancel) button (P33)/
[Fn4] button (P25)
25 [MENU/SET] button (P17, 23)
26 Control dial (P17)/Cursor buttons (P17)
27 [DISP.] button (P28, 32)
¢ If you lost the flash synchro socket cap (VKF5108) or eye cup (VYK6B43), please contact
the dealer where you purchased the camera or Panasonic.
10
21
11 12
26 2722 23 24 25
13
14 1915 18 2016 17
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 14 ページ 2012年10月25日 木曜日 午後5時25分
15
Preparation
(ENG) VQT4M51
28 Drive mode dial
Single (P26):
Burst (P53):
Auto Bracket (P54):
Self-timer (P55):
29 Hot shoe (Hot shoe cover)
Keep the Hot Shoe Cover out of reach of children
to prevent swallowing.
30 Mode dial (P34)
31 [Wi-Fi] button (P60)/[Fn1] button (P25)
32 Front dial
33 [ ](White Balance) button (P46)
34 [ ](ISO sensitivity) button (P45)
35 [ ](Exposure Compensation) button (P44)
36 Flash open button (P43)
37 Stereo microphone
Be careful not to cover the microphone with your
finger. Doing so may make sound difficult to
record.
38 Status indicator (P21)
39 Camera ON/OFF switch (P21)
40 Wi-Fi connection lamp
41 Focus distance reference mark
42 [MIC] socket
43 Headphone socket
44 [HDMI] socket (P76)
45 [AV OUT/DIGITAL] socket (P76, 79, 80)
46 [REMOTE] socket
47 Shoulder strap eyelet (P18)
Be sure to attach the shoulder strap when using
the camera to ensure that you will not drop it.
48 Card door (P20)
36 39 40
41
38
30 3129 32
37
28
33
34
35
42
43
44
45
46
47
48
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 15 ページ 2012年10月25日 木曜日 午後5時25分
16
Preparation
VQT4M51 (ENG)
49 Tripod mount
A tripod with a screw length of 5.5 mm (0.22 inch)
or more may damage this unit if attached.
50 Terminal cover
¢
Keep the terminal cover out of reach of children to
prevent swallowing.
51 Battery door (P20)
52 Release lever (P20)
53 DC coupler cover
When using an AC adaptor, ensure that the
Panasonic DC coupler (DMW-DCC12: optional) and AC adaptor (DMW-AC8E: optional)
are used.
Always use a genuine Panasonic AC adaptor (DMW-AC8E: optional).
When using an AC adaptor, use the AC mains lead supplied with the AC adaptor.
It is recommended to use a fully charged battery or AC adaptor when recording motion pictures.
If while recording motion pictures using the AC adaptor and the power supply is cut off
due to a power outage or if the AC adaptor is disconnected etc., the motion picture will not
be recorded.
¢ If you lost the terminal cover (VKF5104), please contact the dealer where you purchased the
camera or Panasonic.
Lens
H-HS12035
(LUMIX G X VARIO 12 35 mm/
F2.8 ASPH./POWER O.I.S.)
H-VS014140
(LUMIX G VARIO HD 14 140 mm/
F4.05.8 ASPH./MEGA O.I.S.)
1 Lens surface
2 Focus ring (P51)
3 Zoom ring (P43)
4 [O.I.S.] switch
The interchangeable lens (H-HS12035, H-VS014140) have O.I.S switch. Stabiliser
function is activated when the O.I.S switch of the lens is set to [ON]. ([ ] is set at the
time of purchase)
5 Contact point
6 Lens fitting mark
7 Lens mount rubber
ロヰヤレ
ヰヱユワ
53 5149 50 52
23 5 61 74
23 5 61
4
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 16 ページ 2012年10月25日 木曜日 午後5時25分
17
Preparation
(ENG) VQT4M51
Touch panel of this unit is capacitive. Touch the panel directly with your bare finger.
Touch
To touch and release the touch screen.
Use for selecting items or icons.
When selecting features using the touch screen, be sure to touch the
centre of the desired icon.
Drag
A movement without releasing the touch screen.
This is used to move the AF area, operate the slide bar, etc.
This can also be used to move to the next image during playback,
etc.
Pinch (enlarge/reduce)
Pinch the touch panel apart (enlarge) or together (reduce) with
two fingers.
Use to enlarge/reduce the played back images or AF area.
Pressing the cursor button:
Selection of items or setting of values etc., is performed.
Pressing [MENU/SET]:
Confirmation of setting contents, etc., is performed.
This document expresses the up, down, left, and right of the cursor
button as 3/4/2/1.
Rotating the control dial:
Selection of items or setting of values etc., is performed.
Touch screen
Cursor buttons/[MENU/SET] button
Control Dial
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 17 ページ 2012年10月25日 木曜日 午後5時25分
18
Preparation
VQT4M51 (ENG)
Preparation
Check that the camera is turned off.
Change lenses where there is not a lot of dirt or dust. Refer to P92, when dirt or dust gets on the lens.
Do not press the lens release button A when you attach a lens.
Detaching the lens
1 Attach the lens cap.
2 While pressing on the lens release button B, rotate
the lens toward the arrow until it stops and then
remove.
We recommend attaching the shoulder strap when using the camera to prevent it from dropping.
Perform steps 1 to 4 and then attach the other side of the shoulder strap.
Use the shoulder strap around your shoulder.
Do not wrap the strap around your neck.
It may result in injury or accident.
Do not leave the shoulder strap where an infant can reach it.
It may result in an accident by mistakenly wrapping around the neck.
Changing the Lens
Attaching the lens
Attaching the Shoulder Strap
1
2
3
4
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 18 ページ 2012年10月25日 木曜日 午後5時25分
19
Preparation
(ENG) VQT4M51
The battery that can be used with this unit is DMW-BLF19E.
About the [CHARGE] indicator
The [CHARGE] indicator turns on:
The [CHARGE] indicator is turned on during charging.
The [CHARGE] indicator turns off:
The [CHARGE] indicator will turn off once the charging has completed without any
problem. (Disconnect the charger from the electrical socket and detach the battery after
charging is completed.)
Charging time
The indicated charging time is for when the battery has been discharged completely.
The charging time may vary depending on how the battery has been used. The charging
time for the battery in hot/cold environments or a battery that has not been used for a
long time may be longer than normal.
Charging the Battery
1 Connect the AC mains lead.
2 Attach the battery paying attention to the direction of the
battery until it clicks.
The [CHARGE] indicator A lights up and charging begins.
Charging time Approx. 220 min
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 19 ページ 2012年10月25日 木曜日 午後5時25分
20
Preparation
VQT4M51 (ENG)
Always use genuine Panasonic batteries (DMW-BLF19E).
If you use other batteries, we cannot guarantee the quality of this product.
Being careful about the battery orientation, insert all the way until you hear a locking sound and
then check that it is locked by lever A.
Pull the lever A in the direction of the arrow to remove the battery.
Push it securely all the way until you hear a “click” while being careful about the direction in
which you insert it.
To remove the card, push the card until it clicks, then pull the card out upright.
About cards that can be used with this unit
SD Memory Card (8 MB to 2 GB)
SDHC Memory Card (4 GB to 32 GB)
SDXC Memory Card (48 GB, 64 GB)
About the motion picture recording and SD speed class
Confirm the SD Speed Class (the speed standard regarding continuous writing) on a card
label etc. when you record a motion picture. Use a card with SD Speed Class with “Class 4”
or more for [AVCHD]/[MP4] motion picture recording, and use “Class 10” for [MOV].
Please confirm the latest information on the following website.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
Keep the Memory Card out of reach of children to prevent swallowing.
Inserting/Removing the Battery
Inserting/Removing the Card (Optional)
e.g.:
ロヰヤレ
ヰヱユワ
ロヰヤレ
ヰヱユワ
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 20 ページ 2012年10月25日 木曜日 午後5時25分
21
Preparation
(ENG) VQT4M51
Format the card before recording a picture with this unit.
Since data cannot be recovered after formatting, make sure to back up necessary
data in advance.
Select [Format] in the [Setup] menu. (P23)
Confirmation screen is displayed. It is executed when [Yes] is selected.
The clock is not set when the camera is shipped.
1 Turn the camera on.
The status indicator 1 lights when you turn this
unit on.
2 Press [MENU/SET].
3 Press 2/1 to select the items (year, month,
day, hour, minute), and press 3/4 to set.
4 Press [MENU/SET] to set.
5 Press [MENU/SET].
Formatting the card (initialisation)
Setting Date/Time (Clock Set)
ON
OFF
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 21 ページ 2012年10月25日 木曜日 午後5時25分
22
Preparation
VQT4M51 (ENG)
About the eye sensor automatic switching
When [LVF/Monitor Auto] of [Eye Sensor] in the
[Custom] menu is set to [ON] and your eye or an
object is brought close to the viewfinder, the display
automatically switches to the viewfinder display.
A [LVF]/[Fn5] button
B Eye sensor
Switching the Monitor/Viewfinder manually
Press [LVF].
Diopter adjustment
Adjust the diopter to suit your vision so that you
can see the characters displayed in the
viewfinder clearly.
C Diopter adjustment dial
Using the Viewfinder
[LVF]/[Fn5] button can be used in two ways, as [LVF] or as [Fn5] (function 5). At the
time of purchase, it is initially set to [LVF/Monitor Switch].
Refer to P25 for details about the function button.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 22 ページ 2012年10月25日 木曜日 午後5時25分
23
Preparation
(ENG) VQT4M51
Setting the Menu
1
Press [MENU/SET].
Setting menu items
Menu Description of settings
[Rec] (P83) This menu lets you set the aspect ratio, number of pixels and
other aspects of the pictures you are recording.
[Motion Picture]
(P85)
This menu lets you set the [Rec Mode], [Rec Quality], and
other aspects for motion picture recording.
[Custom] (P86) Operation of the unit, such as displaying of the screen and
button operations, can be set up according to your
preferences.
[Setup] (P88) This menu lets you perform the clock settings, select the
operating beep tone settings and set other settings which
make it easier for you to operate the camera.
You can also configure the settings of Wi-Fi related functions.
[Playback] (P90) This menu lets you set the Protection, Cropping or Print
Settings, etc. of recorded pictures.
2
Press 3/4 of the cursor button to select the
menu item and press 1.
3
Press 3/4 of the cursor button to select the
setting and press [MENU/SET].
Depending on the menu item, its setting may not appear or it
may be displayed in a different ways.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 23 ページ 2012年10月25日 木曜日 午後5時25分
24
Preparation
VQT4M51 (ENG)
Calling frequently-used menus instantly
(Quick Menu)
By using the Quick Menu, some of the menu settings can be easily found.
The features that can be adjusted using Quick Menu are determined by the mode or a display
style the camera is in.
1
Press [Q.MENU] to display the Quick
Menu.
2
Rotate the front dial to select the menu item.
A Item
3
Rotate the rear dial to select the setting.
4
Press [Q.MENU] to exit the menu once the
setting is complete.
You can close the menu by pressing the shutter button halfway.
Close the menu
Press [ ] or press the shutter button halfway.
Switching to other menus
e.g.: Switching to the [Setup] menu from [Rec] menu.
1 Press 2.
2 Press 3/4 to select [ ] or another of the menu toggle
icons A.
3 Press 1.
Select a menu item next and set it.
[Q.MENU]/[Fn2] button can be used in two ways, as [Q.MENU] or as [Fn2] (function 2).
At the time of purchase, it is initially set to [Q.MENU].
Refer to P25 for details about the function button.
A
ヲハヮユワヶ
ョㄏビ
AU
TO
602.8
0
AWB
AFS
AFS
A
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 24 ページ 2012年10月25日 木曜日 午後5時25分
25
Preparation
(ENG) VQT4M51
Assigning frequently used functions to the
buttons (function buttons)
You can assign recording functions, etc. to specific buttons and icons.
To use those functions, press [Fn1], [Fn2], [Fn3], [Fn4] or [Fn5] or touch [Fn6] or [Fn7].
1
Select the function buttons you want to assign the function from the
[Fn Button Set] in the [Custom] menu. (P23)
2
Press 3/4 to select the function you want to assign and then press
[MENU/SET].
Assign your favourite functions to each of the function buttons.
Exit the menu after it is set.
ロヷョ
ョㄏブ
ヲハヮユワヶ
ョㄏビ
ョㄏフ
ョㄏピ
Fn6
Fn7
Fn6Fn6Fn6Fn6
Fn7Fn7Fn7Fn7
ョㄏヒ
ヸㄊノョㄊ
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 25 ページ 2012年10月25日 木曜日 午後5時25分
26
Basic
VQT4M51 (ENG)
Taking a Still picture
Set the drive mode dial to [ ] (single).
1
Select the Recording Mode. (P34)
2
Press the shutter button halfway to focus.
A Aperture value
B Shutter speed
Aperture value and shutter speed are displayed. (It
will flash in red if the correct exposure is not
achieved, except when set to flash.)
When the image is correctly focused, the picture
will be taken, since the [Focus/Release Priority]
is set initially to [FOCUS].
3
Press the shutter button fully (push it in
further), and take the picture.
60
60
602.8
2.8
2.8
AB
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 26 ページ 2012年10月25日 木曜日 午後5時25分
27
Basic
(ENG) VQT4M51
Recording Motion Picture
This can record full high definition motion pictures compatible with the AVCHD format or
motion pictures recorded in MP4, MOV.
Audio will be recorded in stereo.
Maximum time to record motion pictures continuously with [AVCHD] is 29 minutes
59 seconds.
Maximum time to record motion pictures continuously with [MP4] is 29 minutes
59 seconds or up to 4 GB.
Maximum time to record motion pictures continuously with [MOV] is 29 minutes
59 seconds.
Though a [MOV] motion picture can be recorded continuously without a pause even
when its file size exceeds 4 GB, the recorded content is played back with multiple files.
Item Format
[AVCHD]
Select this format to record HD (high definition) video for playback on
your HDTV using an HDMI connection.
[MP4]
Select this format to record standard definition video for playback on your
PC.
[MOV]
Data format for image editing.
1
Start recording by pressing the motion
picture button.
A Elapsed recording time
B Available recording time
The recording state indicator (red) C will flash while
recording motion pictures.
If approximately 10 seconds elapses without an
operation being performed, part of the display will
disappear. Press [DISP.] or touch the monitor to
make the display reappear.
Release the motion picture button right after you
press it.
2
Stop the recording by pressing the motion
picture button again.
R
1
m
3737
sR
1
m
37
s
3s3s3s
A
B
C
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 27 ページ 2012年10月25日 木曜日 午後5時25分
28
Basic
VQT4M51 (ENG)
Switching the Information Displayed on the
recording screen
Press [DISP.] to change.
Screen will switch as follows:
(Example of monitor display)
A With information
B Without information
C With information (tilt sensor display)
D Without information (tilt sensor display)
E On-monitor recording information
¢1
F Turned off
¢1 It is displayed when the [Monitor Info. Disp.] of the [Custom] menu is set to [ON].
Settings can be adjusted directly by touching each of the items displayed on the screen.
If approximately 10 seconds elapses without an operation being performed, part of the display
will disappear. Press [DISP.] or touch the monitor to make the display reappear.
98
98
98
0
AFS
AFS
AVCHD
FHD
50i
989898
0
AFSAFS
AVCHD
FHD
50i
AFSAFS
98
AWB
0 0
0
Fn
ISO
AUTO
Wi-Fi
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 28 ページ 2012年10月25日 木曜日 午後5時25分
29
Basic
(ENG) VQT4M51
Playing Back Pictures/Motion Pictures
1
Press [(].
2
Press 2 or 1.
Playing Back Pictures
2: Play back the previous picture
1: Play back the next picture
Using the Playback Zoom
Rotate the rear dial right.
1k 2k 4k 8k 16k
You can move the enlarged part by pressing 3/4/2/1 of the
cursor button or dragging the screen. (P17)
You can also enlarge (2k) the image by double-touching the part
you want to enlarge. If you double-touch the enlarged image, the
magnification is reset to 1k.
You can also enlarge/reduce the image by pinching out/pinching
in (P17) on the part you want to enlarge/reduce.
1/981/98
1/98
1/98
2.0X2.0X2.0X2.0X
2.0X2.0X2.0X2.0X
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 29 ページ 2012年10月25日 木曜日 午後5時25分
30
Basic
VQT4M51 (ENG)
Displaying multiple screens (Multi Playback)
Rotate the rear dial left.
1 screen 12 screens 30 screens Calendar screen
display
It is possible to switch the playback screen by touching the
following icons.
[ ]: 1 screen
[ ]: 12 screens
[ ]: 30 screens
[ ]: Calendar screen display
Screen can be switched by dragging the slide bar up or down.
A Slide bar
B Number of the selected picture and the total number of
recorded pictures
Displaying Pictures by Recording Date (Calendar Playback)
1 Rotate the rear dial left to display the Calendar
screen.
2 Press 3/4/2/1 to select the date to be played back.
If there were no pictures recorded during a month, that
month is not displayed.
3 Press [MENU/SET] to display the images that are
recorded in selected date.
Rotate the rear dial left to return to the Calendar screen
display.
4 Press 3/4/2/1 to select a picture and then press
[MENU/SET].
CAL
1/96
A
B
2012
12
SUN MON TUE WED THU FRI SAT
56
14 15
19 20 21 22
4
11
18
25 26
7
12
1
10
17
24
3
29
8
13
9
16
23
31
30
2
27 28
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 30 ページ 2012年10月25日 木曜日 午後5時25分
31
Basic
(ENG) VQT4M51
This unit was designed to play motion pictures using the AVCHD, MP4, MOV and
QuickTime Motion JPEG formats.
In Playback Mode, select a picture with the motion
picture icon ([ ]), and then press 3 to play back.
A Motion picture icon
B The motion picture recording time
After playback starts, the elapsed playback time is displayed on the
screen.
Touching [ ] in the middle of the screen allows you to play back motion pictures.
Operations performed during Motion Picture Playback
Playing Back Motion Pictures
3 Play/Pause 4 Stop
2
Fast rewind
1
Fast forward
Frame-by-frame rewind
(while pausing)
Frame-by-frame forward
(while pausing)
Control
dial
(left)
Reduce volume level Control
dial
(right)
Increase volume level
12s12s12s12s
A
B
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 31 ページ 2012年10月25日 木曜日 午後5時25分
32
Basic
VQT4M51 (ENG)
Press [DISP.] to switch the monitor screen.
Screen will switch as follows:
A With information
¢1
B Detailed information display
C Histogram display
D Without information (Highlight display)
¢1, 2
E Without information
¢1 If approximately 10 seconds elapses without an operation being performed, part of the
display will disappear. Press [DISP.] or touch the monitor to make the display reappear.
¢2 This is displayed if [Highlight] in the [Custom] menu is set to [ON].
Changing the information displayed on the playback screen
60F2.8
0
AWB
AWB
1/98
98
1/98
2
00
100-0001
F2.8
60
P
s
RGB
AFS
200
0
WBWB
ISOISO
AWB
STD.STD.STD.
'(&
F2.8
60
1/98
ISO
200
0
100-0001
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 32 ページ 2012年10月25日 木曜日 午後5時25分
33
Basic
(ENG) VQT4M51
Deleting Pictures
Once deleted, pictures cannot be recovered.
¢ Picture groups are treated as a single picture. (All the pictures in the selected picture group
will be deleted.)
To delete a single picture
1
In Playback Mode, select the picture to delete
and then press [ ].
The same operation can be performed by touching
[].
2
Press 3 to select [Delete Single] and then
press [MENU/SET].
Confirmation screen is displayed.
Pictures are deleted by selecting [Yes].
To delete multiple pictures (up to 100
¢
) or all the pictures
1
In Playback Mode, press [ ].
2
Press 3/4 to select [Delete Multi] or [Delete All] and then press
[MENU/SET].
[Delete All] Confirmation screen is displayed.
Pictures are deleted by selecting [Yes].
It is possible to delete all pictures except the ones set as favourite when [All Delete
Except Favorite] is selected with the [Delete All] set.
3
(When [Delete Multi] is selected) Press 3/4/2/1
to select the picture, and then press [MENU/SET]
to set. (Repeat this step.)
[] appears on the selected pictures. If [MENU/SET] is
pressed again, the setting is cancelled.
4
(When [Delete Multi] is selected) Press 2 to select [OK], and then
press [MENU/SET] to execute.
Confirmation screen is displayed.
Pictures are deleted by selecting [Yes].
ョㄏフ
'HOHWH6LQJOH
'HOHWH0XOWL
'HOHWH$OO
2.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 33 ページ 2012年10月25日 木曜日 午後5時25分
34
Recording
VQT4M51 (ENG)
Selecting the Recording Mode
Select the mode by rotating the
mode dial.
Rotate the mode dial slowly to select the
desired mode A.
Programme AE Mode (P35)
Records at the aperture value and shutter speed set by the camera.
Aperture-Priority AE Mode (P36)
The shutter speed is automatically determined by the aperture value you set.
Shutter-Priority AE Mode (P36)
The aperture value is automatically determined by the shutter speed you set.
Manual Exposure Mode (P37)
The exposure is adjusted by the aperture value and the shutter speed which are
manually adjusted.
Creative Video Mode (P56)
Allows you to set the aperture value and shutter speed and record motion pictures with
slow and quick effects.
¢ You cannot take still pictures.
Custom Mode (P42)
Use this mode to take pictures with previously registered settings.
Scene Guide Mode (P38)
This allows you to take pictures that match the scene being recorded.
Creative Control Mode (P39)
Record while checking the image effect.
Intelligent Auto Mode (P40)
The subjects are recorded using settings automatically selected by the camera.
Intelligent Auto Plus Mode (P41)
Allows you to adjust the brightness and colour hue when in Intelligent Auto Mode.
3
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 34 ページ 2012年10月25日 木曜日 午後5時25分
35
Recording
(ENG) VQT4M51
Taking Pictures with Your Favourite Settings
(Programme AE Mode)
Recording Mode:
The camera automatically sets the shutter speed and the aperture value according to the
brightness of the subject.
You can take pictures with greater freedom by changing various settings in the [Rec]
menu.
1
Set the mode dial to [ ].
2
Press the shutter button halfway and display the
aperture value and shutter speed value on the
screen.
3
While the values are displayed (about 10 seconds), perform
Programme Shift by rotating the rear dial or front dial.
Rotate the front/rear dial to display [Expo.Meter] B.
The Programme Shift indication A appears on the screen.
To cancel Programme Shift, turn off this unit or rotate the front/rear dial until the
Programme Shift indication disappears.
In Programme AE Mode, you can change the preset aperture value and shutter speed
without changing the exposure. This is called Programme Shift.
You can make the background more blurred by decreasing the aperture value or record a
moving subject more dynamically by slowing the shutter speed when taking a picture in
Programme AE Mode.
Programme Shift
604.0
2
00
250 15
4.02.8 5.6 8.0
3060125
0
SSSS
F
BA
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 35 ページ 2012年10月25日 木曜日 午後5時25分
36
Recording
VQT4M51 (ENG)
Taking Pictures by Specifying the Aperture/
Shutter Speed
Recording Mode:
Set the aperture value to a higher number when you want a sharp focus background. Set
the aperture value to a lower number when you want a soft focus background.
1
Set the mode dial to [ ].
2
Set the aperture value by rotating the rear dial or
the front dial.
A Aperture value
B Exposure meter
The effects of the set aperture value will not be visible on the
recording screen. To check on the recording screen, please
use [Preview]. (P38)
When you want to take a sharp picture of a fast moving subject, set with a faster shutter
speed. When you want to create a trail effect, set to a slower shutter speed.
1
Set the mode dial to [ ].
2
Set the shutter speed by rotating the rear dial or
the front dial.
A Shutter speed
B Exposure meter
The effects of the set shutter speed will not be visible on the
recording screen. To check on the recording screen, please
use [Preview]. (P38)
Aperture-Priority AE Mode
Shutter-Priority AE Mode
SSSS
F
60 4
4.0 5.6 8.0 11 16
81530
8.0
A B
SSSS
F
60
11 8.0 5.6 4.0 2.8
250 500 1
000
125
250
BA
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 36 ページ 2012年10月25日 木曜日 午後5時25分
37
Recording
(ENG) VQT4M51
Determine the exposure by manually setting the aperture value and the shutter speed.
The Manual Exposure Assistance appears on the lower portion of the screen to indicate
the exposure.
1
Set the mode dial to [ ].
2
Rotate the rear dial to set the shutter speed, and
rotate the front dial to set the aperture value.
A Exposure meter
B Aperture value
C Shutter speed
D Manual Exposure Assistance
Manual Exposure Assistance
About [B] (Bulb)
If you set the shutter speed to [B], the shutter stays open while the shutter button is
pressed fully (up to approximately 60 minutes).
The shutter closes if you release the shutter button.
Use this when you want to keep the shutter open for a long time to take pictures of
fireworks, a night scene etc.
When you take pictures with the shutter speed set to [B], noise may become visible. To avoid
picture noise, we recommend setting [Long Shtr NR] in the [Rec] menu to [ON] before taking
pictures.
The Manual Exposure Assistance does not appear.
This cannot be used when [Electronic Shutter] is set to [ON].
It can only be used with Manual Exposure Mode.
Constant preview
In Manual Exposure Mode, when [Constant Preview] in the [Custom] menu is [ON], you
will be able to confirm the effects of aperture and shutter speed on the screen. (P38)
Close the flash.
It can only be used with Manual Exposure Mode.
Manual Exposure Mode
The exposure is adequate.
Set to faster shutter speed or larger aperture value.
Set to slower shutter speed or smaller aperture value.
SSSS
F
1258
5.64.02.8 8.0 11
603015
305.6
00
-
3
-
3
A
D
CB
000
++
30
+
30
00
0
3
3
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 37 ページ 2012年10月25日 木曜日 午後5時25分
38
Recording
VQT4M51 (ENG)
Applicable modes:
1 Set [Fn Button Set] in the [Custom] menu to [Preview]. (P25)
The following step is an example in which [Preview] is assigned to [Fn4].
2 Switch to confirmation screen by pressing [Fn4].
Screen is switched every time [Fn4] is pressed.
Taking Pictures that match the Scene being
recorded
(Scene Guide Mode)
Recording Mode:
If you select a scene to suit the subject and recording conditions with reference to the
example images, the camera will set optimal exposure, colour, and focus, allowing you to
record in a manner appropriate to the scene.
1
Set the mode dial to [ ].
2
Press 2/1 to select the scene.
You can also select the scene by dragging the example images.
3
Press [MENU/SET] to set.
To enjoy a variety of picture effects
Press [DISP.] or touch [ ] on the scene selection screen to display explanations etc.
for picture effects to suit the scene. To take full advantage of the picture effects, we
recommend that you read the explanations and try recording pictures.
Confirm the Effects of Aperture and Shutter Speed (Preview Mode)
Normal recording
screen
Effects of Aperture
Effects of Shutter
Speed
DISP.
DISP.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 38 ページ 2012年10月25日 木曜日 午後5時25分
39
Recording
(ENG) VQT4M51
Taking Pictures with different image effects
(Creative Control Mode)
Recording Mode:
This mode records with additional image effects. You can set the effects to add by
selecting example images and checking them on the screen.
The strength and colours of the effects can be easily adjusted to fit your preferences.
Select the colour to leave in
1 Press 3 to display the setting screen.
2 Select the colour you want to leave by moving the frame with 3/4/2/1.
3 Press [MENU/SET] to set.
1
Set the mode dial to [ ].
2
Press 3/4 to select the image effects (filters).
You can also select the image effects (filters) by touching
the example images.
Press [DISP.] or touch [ ] to display the explanation
for the selected image effect.
3
Press [MENU/SET] to set.
Adjust the effect to fit your preferences
1 Press [ ].
2 Rotate the rear dial to adjust.
The items that can be set differ depending on which Creative
Control Mode is currently set.
When making the effect setting, [ ] is displayed on the
screen.
If you cannot change the settings, select the centre
(standard).
Press [ ] again to return to the recording screen.
[One Point Color]
DISP.
DISP.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 39 ページ 2012年10月25日 木曜日 午後5時25分
40
Recording
VQT4M51 (ENG)
Taking Pictures using the Automatic Function
(Intelligent Auto Mode)
Recording Mode:
In this mode, the camera makes the optimal settings for the subject and scene, so we
recommend it when you wish to leave the settings to the camera and record without
thinking about them.
1
Set the mode dial to [¦].
The camera will switch to either the most recently used of Intelligent Auto Mode or
Intelligent Auto Plus Mode. (P41)
At the time of purchase, the mode is set to Intelligent Auto Plus Mode.
2
Align the screen with the subject.
When the camera identifies the optimum scene, the icon of the
scene concerned is displayed in blue for 2 seconds, after which
its colour changes to the usual red.
When the subject is touched, AF Tracking function works. It is also possible by pressing
[ ], and then pressing the shutter button halfway.
You can easily set the blurriness of the background while checking the screen.
1 Press [Fn4].
2 Set the blurriness by rotating the rear dial.
If you press [MENU/SET], you can return to the recording screen.
(To end the Defocus Control function, press [Fn4].)
Taking a picture with a blurred background (Defocus Control)
AVCHD
FHD
50i
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 40 ページ 2012年10月25日 木曜日 午後5時25分
41
Recording
(ENG) VQT4M51
Recording Mode:
This mode enables you to change the brightness and colour tone to your preferred
settings from the ones set by the camera in Intelligent Auto Mode.
1 Press [ ].
2 Rotate the rear dial to adjust colour.
This will adjust the colour of the image from a reddish colour to
a bluish colour.
Press [ ] again to return to the recording screen.
Recording images by changing the brightness or colour tone
(Intelligent Auto Plus Mode)
1
Press [MENU/SET] when in Intelligent Auto
Mode.
2
Press 1 to select [ ] and then press
[MENU/SET].
Press [DISP.] or touch [ ] to display the description
of the selected mode.
When the menu does not appear, select the [¦] tab on
the menu screen.
Setting brightness
1 Press [ ].
2 Rotate the rear dial to adjust brightness.
Press [ ] again to return to the recording screen.
Setting colour
DISP.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 41 ページ 2012年10月25日 木曜日 午後5時25分
42
Recording
VQT4M51 (ENG)
Registering your preferred settings
(Custom Mode)
Recording Mode:
You can register the current camera settings as custom settings. If you then record in
Custom Mode, you can use the registered settings.
Initial setting of the Programme AE Mode is registered as the custom settings initially.
To allow recording using the same settings, up to 5 sets of current camera settings can be
registered using [Cust.Set Mem.]. ( , , , , )
1
Select [Cust.Set Mem.] in the [Custom] menu. (P23)
2
Press 3/4 to select the custom set to register and then press
[MENU/SET].
Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
You can easily call up the settings you have registered using [Cust.Set Mem.].
1
Set the mode dial to [ ], [ ] or [ ].
If you set the mode dial to [ ], the camera calls a custom setting registered to
[ ], [ ] or [ ]. The last custom setting you used is called.
To change the custom setting
> step
2, 3
2
Press [MENU/SET] to display the menu.
3
Press 2/1 to select the custom setting you want to use, and then
press [MENU/SET].
Changing the settings
Registered contents do not change when the menu setting is changed temporarily with the
mode dial set to , or . To change the registered settings, overwrite the
registered content using [Cust.Set Mem.] on the [Custom] menu.
Registering Personal Menu Settings (Registering custom settings)
Preparations: Set in advance the Recording Mode you wish to save and select the
desired menu settings on the camera.
Recording using registered custom set
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 42 ページ 2012年10月25日 木曜日 午後5時25分
43
Recording
(ENG) VQT4M51
Taking Pictures with the Zoom
Applicable modes:
Types of zooms and recording magnification
¢1 When a picture size of [S] (4 M), aspect ratio of [X] is selected.
The magnification level differs depending on [Picture Size] and [Aspect Ratio] setting.
¢
2 When recording quality setting [FHD/25p], [FHD/24p], [FHD/25p/ ] or [FHD/24p/ ] is selected:
Taking pictures by using the flash
Applicable modes:
Open/Close the built-in flash
Taking a picture using the flash becomes
possible by opening the built-in flash.
A To open the built-in flash
Turn the camera on, and press the flash
open button.
B To close the built-in flash
Press the built-in flash until it clicks.
Forcibly closing the flash can damage the camera.
Be sure to close the built-in flash when not in use.
Feature Optical Zoom
Extra Tele Conversion
(EX) (P84, 85)
Digital Zoom (P84)
Recording
magnification
Different depending on
the lens used.
When taking still
pictures: Max. 2k
¢1
When recording motion
pictures: 2.4k
¢2
When selecting [2k]
When selecting [4k]
Picture quality No deterioration No deterioration
The higher the
magnification level, the
greater the deterioration.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 43 ページ 2012年10月25日 木曜日 午後5時25分
44
Recording
VQT4M51 (ENG)
Applicable modes:
Set the built-in flash to match the recording.
Open the flash.
1 Select [Flash] in the [Rec] menu. (P23)
2 Press 3/4 to select [Flash Mode] and then press [MENU/SET].
3 Press 3/4 to select the item and then press [MENU/SET].
Compensating the Exposure
Applicable modes:
Use this function when you cannot achieve appropriate exposure due to the difference in
brightness between the subject and the background.
1
Press [ ].
2
Rotate the rear dial to compensate the exposure.
A Exposure Compensation value
B Flash Adjust
You can switch the functions between the rear dial and the
front dial by pressing [DISP.].
Select [n0] to return to the original exposure.
3
Rotate the front dial to adjust the flash output.
Only available when [Auto Exposure Comp.] in [Flash] in the [Rec] menu is set to [ON],
and [Firing Mode] in [Flash] is set to [TTL] or [WIRELESS].
4
Press [ ] to set.
You can also press the shutter button halfway to set.
Changing Flash Mode
+1+1
+1+1 +2+2 +3+3 +4+4 +5+5
-
5
-
5
-
4
-
4
-
3
-
3
-
2
-
2
-
1
-
100
0
A B
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 44 ページ 2012年10月25日 木曜日 午後5時25分
45
Recording
(ENG) VQT4M51
Setting the Light Sensitivity
Applicable modes:
This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure
enables pictures to be taken even in dark places without the resulting pictures coming out
dark.
1
Press [ ].
2
Rotate the rear dial to select the ISO sensitivity.
A ISO sensitivity
B ISO Limit Set
You can switch the functions between the rear dial and the
front dial by pressing [DISP.].
3
Rotate the front dial to set the upper limit of ISO
sensitivity.
It will work when the [Sensitivity] is set to [AUTO] or [ ].
4
Press [ ] to set.
You can also set by pressing the shutter button halfway.
¢1 When [ISO Limit Set] is set to [OFF].
When [ISO Limit Set] is set to [400], [800], [1600], [3200], [6400] or [12800], the camera
optimises the ISO sensitivity according to the brightness of the subject within the range not
exceeding the selected upper limit.
¢2 Only available when [Extended ISO] is set.
ISO sensitivity Settings
AUTO
The ISO sensitivity is automatically adjusted according to the
brightness.
Maximum [ISO3200] (With the flash on [ISO1600])
¢1
(Intelligent)
The ISO sensitivity is adjusted according to the movement of
the subject and the brightness.
Maximum [ISO3200] (With the flash on [ISO1600])
¢1
The shutter speed is not fixed when the shutter button is
pressed halfway. It is continuously changing to match the
movement of the subject until the shutter button is pressed
fully.
L.125
¢2
/200/400/800/1600/
3200/6400/12800/H.25600
¢2
The ISO sensitivity is fixed to various settings.
When the [ISO Increments] in [Rec] menu is set to [1/3 EV],
items of ISO sensitivity that can be set will increase.
ISOISO
LIMITLIMIT
OFFOFFAUTOAUTO
2
00
2
00
4040
ISO
ISOISOISOISOISOISOISOISOISOISOISO
AUTOAUTO
B
A
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 45 ページ 2012年10月25日 木曜日 午後5時25分
46
Recording
VQT4M51 (ENG)
Adjusting the White Balance
Applicable modes:
In sunlight, under incandescent lights or in other such conditions where the colour of white
takes on a reddish or bluish tinge, this item adjusts to the colour of white which is closest
to what is seen by the eye in accordance with the light source.
1
Press [ ].
2
Rotate the rear dial or front dial to select the White
Balance.
Setting can also be performed by rotating the control dial.
3
Press 4, and then press 2/1 or 3/4 to make fine
adjustments to the White Balance.
You can also make fine adjustments by touching the White Balance graph.
To reset, press [DISP.].
4
Press [ ] to set.
You can also press the shutter button halfway to set.
¢It will operate as [AWB] during motion picture recording.
2 : A (AMBER: ORANGE)
1 : B (BLUE: BLUISH)
3 : G (GREEN: GREENISH)
4 : M (MAGENTA: REDDISH)
Item Recording conditions
[AWB] Automatic adjustment
[V] When taking pictures outdoors under a clear sky
[Ð] When taking pictures outdoors under a cloudy sky
[î] When taking pictures outdoors in the shade
[Ñ] When taking pictures under incandescent lights
[]
¢
When taking pictures with the flash only
[ ]/[ ]/[
]/[ ]
The manually set value is used
[] When using the preset colour temperature setting
AWBAWB
WBWBWBWBWBWBWBWBWBWBWB
1
2
3
4
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 46 ページ 2012年10月25日 木曜日 午後5時25分
47
Recording
(ENG) VQT4M51
Bracket setting is performed based on the adjustment values for the White Balance fine
adjustment, and 3 pictures with different colours are automatically recorded when the
shutter button is pressed once.
1 Press [ ].
2 Rotate the rear dial or front dial to select the White
Balance, and then press 4.
3 Rotate the control dial to set the bracket.
Rotating the control dial to the right: Horizontal ([A] to [B])
Rotating the control dial to the left: Vertical ([G] to [M])
You can also set the bracket by touching [ ]/[ ].
To reset, press [DISP.].
4 Press [MENU/SET].
Set the White Balance value. Use to match the condition when taking photographs.
1 Press [ ].
2 Rotate the rear dial or front dial to select [ ], [ ], [ ], or [ ], and then
press 3.
3 Aim the camera at a sheet of white paper etc. so that the
frame in the centre is filled by the white object only and
then press [MENU/SET].
You can set the colour temperature manually for taking natural pictures in different lighting
conditions. The colour of light is measured as a number in degrees Kelvin. As the colour
temperature increases, the picture becomes more bluish. As the colour temperature
decreases, the picture becomes more reddish.
1 Press [ ].
2
Rotate the rear or front dial to select [ ], and then press
3
.
3 Press 3/4 to select the colour temperature and then
press [MENU/SET].
You can set a colour temperature from [2500K] to [10000K].
White Balance Bracket
Setting the White Balance manually
Setting the colour temperature
GGGGGG
AAAAAABBBBBBB
MMMMMM
1 2
3
4
6500K
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 47 ページ 2012年10月25日 木曜日 午後5時25分
48
Recording
VQT4M51 (ENG)
Taking Pictures with Auto Focus
Applicable modes:
This allows the focusing method that suits the positions and number of the subjects to be
selected.
Also, it is possible to set the focus to the subject specified on the touch screen.
(Set the [Touch AF] of the [Touch Settings] in the [Custom] menu to [ON].)
1
Set the focus mode lever to [AFS/AFF] or
[AFC] (P49).
2
Press [].
3
Press 2/1 to select AF Mode and then press
[MENU/SET].
AF area selection screen is displayed when 4 is pressed while
[š], [ ], [Ø], or [ ] is selected.
[ ]/[Fn3] button can be used in two ways, as [ ] (AF Mode) or as [Fn3] (function 3).
At the time of purchase, it is initially set to
[AF Mode].
Refer to P25 for details about the function button.
AFC
AFS/
AFF
MF
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 48 ページ 2012年10月25日 木曜日 午後5時25分
49
Recording
(ENG) VQT4M51
¢ In [AFS/AFF] of the [Custom] menu, you can assign [AFS] or [AFF] to the [AFS/AFF] of the
focus mode lever.
The camera automatically detects the person’s face. The focus and exposure can then be
adjusted to fit that face no matter what portion of the picture it is in. (max. 15 areas)
When the camera detects a person’s face, the AF area is displayed.
Yellow:
When the shutter button is pressed halfway, the frame turns green when the camera is
focused.
White:
Displayed when more than one face is detected. Other faces that are the same distance
away as faces within the yellow AF areas are also focused.
About the focus mode (AFS/AFF/AFC)
Item
The movement of the
subject and the scene
(recommended)
Description of settings
AFS
¢
Subject is still
(Scenery, anniversary
photograph, etc.)
“AFS” is an abbreviation of “Auto Focus Single”.
Focus is set automatically when the shutter button is
pressed halfway. Focus will be fixed while it is pressed
halfway.
AFF
¢
Movement cannot be
predicted
(Children, pets, etc.)
“AFF” is an abbreviation of “Auto Focus Flexible”. In
this mode, focusing is performed automatically when
the shutter button is pressed halfway.
If the subject moves while the shutter button is pressed
halfway, the focus is corrected to match the movement
automatically.
AFC
Subject is moving
(Sport, trains, etc.)
“AFC” is an abbreviation of “Auto Focus Continuous”.
In this mode, while the shutter button is pressed
halfway, focusing is constantly performed to match the
movement of the subject. When the subject is moving,
the focusing is performed by predicting the subject
position at the time of recording. (Movement prediction)
MF
Set the focus manually. (P51)
Type of the Auto Focus Mode
About [ ] ([Face Detection])
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 49 ページ 2012年10月25日 木曜日 午後5時25分
50
Recording
VQT4M51 (ENG)
Focus and exposure can be adjusted to a specified subject. Focus and exposure will keep
on following the subject even if it moves. (Dynamic tracking)
When operating buttons
Place the subject in the AF tracking frame, and press the shutter
button halfway to lock the subject.
A AF tracking frame
AF area will turn green when the camera detects the subject.
The AF area turns yellow when the shutter button is released.
Lock is cancelled when [MENU/SET] is pressed.
Up to 23 points for each AF area can be focused. This is effective when the subject is not
in the centre of the screen.
(AF area frame will be same as image aspect ratio setting)
The camera focuses on the subject in the AF area on the centre of the screen.
You can achieve a more precise focus on a point that is smaller than [Ø].
Setting up position of the AF area
Perform the operation after cancelling the touch shutter function.
1 Select [ ] and press 4.
2 Press 3/4/2/1 to set the focus position and then press
[MENU/SET].
The assist screen is enlarged to approximately 5 times original
size.
The assist screen can also be displayed by touching the subject.
3 Press 3/4/2/1 to align the subject on the cross point of the crosshair in the
centre of the screen.
The focus position
can also be set by dragging the screen.
Press [DISP.] to return the focus position to the centre of the screen.
On the assist screen, it is also possible to record a picture by touching [ ].
Setting up [ ] ([AF Tracking])
About [ ] ([23-Area])
About [ ] ([1-Area])
About [ ] ([Pinpoint])
A
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 50 ページ 2012年10月25日 木曜日 午後5時25分
51
Recording
(ENG) VQT4M51
Taking Pictures with Manual Focus
Applicable modes:
Use this function when you want to fix the focus or when the distance between the lens
and the subject is determined and you do not want to activate Auto Focus.
1
Set the focus mode lever to [MF].
2
Rotate the focus ring on the lens to focus on the subject.
A Approximate indicator of (infinity)
When the focus ring is rotated, display is switched to the assist
screen and the image is enlarged (MF Assist B). You can
change the display method of the MF Assist at [MF Assist] in
the [Custom] menu.
MF guide C is displayed on the screen when the focus ring is
rotated if the [MF Guide] in the [Custom] menu is set to [ON].
You can check the direction of rotation of the focus ring is
toward the near side or the far side.
Displaying the MF Assist
It is displayed by rotating the focus ring or touching the screen. (In the Creative Control Mode
[Miniature Effect], MF Assistance cannot be displayed by touching the screen)
It can also be displayed by pressing [ ] to display the setup screen for the enlarged area,
deciding the area to enlarge using the cursor button, and then pressing [MENU/SET].
It will switch to the setting screen for the enlarged area by pressing the cursor button when the
[Direct Focus Area] in the [Custom] menu is set to [ON].
Changing the display of the MF Assist
You can switch the magnification factor between approx. 4 times, 5 times and 10 times. In
the case of 4 times magnification, the central region is magnified. In the case of 5 and 10
times magnification, the whole screen is magnified.
To change the magnification, rotate the rear dial or touch [ ]/[ ].
Moving the enlarged area
The enlarged area can be moved by dragging the screen (P17), or pressing the cursor button.
The following will return the MF assistance to the original position.
When the [Focus Mode] is set to other than [MF]
Changing [Aspect Ratio] or [Picture Size]
Turning the camera off
Pressing [DISP.] when the setting screen for determining the area to be enlarged is displayed.
Closing the MF Assist
It will close when the shutter button is pressed halfway.
You can also close MF Assist by pressing [MENU/SET] or touching [Exit].
When displayed by rotating the focus ring, it is closed approximately 10 seconds after the
operation is stopped.
MF ASSIST
B
A
C
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 51 ページ 2012年10月25日 木曜日 午後5時25分
52
Recording
VQT4M51 (ENG)
Fixing the Focus and the Exposure (AF/AE Lock)
Applicable modes:
This is useful when you want to take a picture of a subject outside the AF area or the
contrast is too strong and you cannot achieve appropriate exposure.
1
Align the screen with the subject.
2
Press and hold [AF/AE LOCK] to fix the focus or exposure.
If you release [AF/AE LOCK], AF/AE Lock is cancelled.
Only the exposure is locked in the default setting.
3
While pressing [AF/AE LOCK], move the camera as
you compose the picture and then press shutter
button fully.
A AE Lock indication
When [AE LOCK] is set, after pressing the shutter button halfway to focus, press the
shutter button fully.
AF/AE Lock
Locking of the focus and exposure can be set in [AF/AE Lock] in the [Custom] menu.
Item
Settings
[AE LOCK]
Only the exposure is locked.
[AEL], aperture value, the shutter speed light when the exposure is set.
[AF LOCK]
Only the focus is locked.
[AFL], the focus indication, aperture value, the shutter speed light when the
subject is focused.
[AF/AE LOCK]
Both focus and exposure are locked.
[AFL], [AEL], the focus indication, aperture value and the shutter speed light
when the subject is focused and the exposure is set.
[AF-ON]
Auto Focus Mode is activated.
AEL
AEL
602.8
A
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 52 ページ 2012年10月25日 木曜日 午後5時25分
53
Recording
(ENG) VQT4M51
Taking Pictures using Burst Mode
Applicable modes:
Pictures are taken continuously while the shutter button is pressed.
Pictures taken with a burst speed of [SH] will be recorded as a single burst group.
1
Set the drive mode dial to [ ].
2
Focus on the subject and take a picture.
A When Burst Mode is set to high speed [H].
Hold down the shutter button fully to activate the Burst Mode.
Changing the burst speed
1 Select [Burst Rate] in the [Rec] menu. (P23)
2 Press 3/4 to select the burst speed and then press [MENU/SET].
[SH]
(Super high
speed)
[H]
(High speed)
[M]
(Middle
speed)
[L]
(Low speed)
Burst speed
(pictures/second)
20642
Live View during Burst
Mode
None None Available Available
¢1
With RAW files
18
¢2, 3
Without RAW files Max. 80
Depends on the capacity of the card
¢3
¢1 Number of recordable pictures
¢2 Depending on the recording conditions, the number of frames in a burst may be
reduced. (For example, when [i.Resolution] of the recording menu is set to
[EXTENDED], the number of frames in a burst may be reduced)
¢3 Pictures can be taken until the capacity of the card becomes full. However the burst
speed will become slower halfway. The exact timing of this depends on the aspect
ratio, the picture size, the setting for the quality and the type of card used.
AFSAFS
H
A
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 53 ページ 2012年10月25日 木曜日 午後5時25分
54
Recording
VQT4M51 (ENG)
Focusing in Burst Mode
¢1 When the subject is dark or the burst speed is set to [SH], the focus is fixed on the first
picture.
¢2 The burst speed may become slower because the camera is continuously focusing on the
subject.
¢3 Burst speed takes priority, and focus is estimated within possible range.
Taking Pictures using Auto Bracket
Applicable modes:
Maximum of 7 pictures will be recorded with different exposure settings following the
Exposure Compensation range every time the shutter button is pressed.
1
Set the drive mode dial to [ ].
2
Focus on the subject and take a picture.
A Auto Bracket indication
If you press and hold the shutter button, the number of pictures that
you set is taken.
The Auto Bracket indication blinks until the number of pictures that you set is taken.
The picture count is reset to [0] if you change the Auto Bracket setting or turn the
camera off before all the pictures that you set are taken.
Changing the settings for [Single/Burst Settings], [Step] and [Sequence] in Auto
Bracket
1 Select [Auto Bracket] in the [Rec] menu. (P23)
2 Press 3/4 to select [Single/Burst Settings], [Step] or [Sequence] and then
press 1.
3 Press 3/4 to select the setting and then press [MENU/SET].
Exit the menu after it is set.
Focus Mode
Focus/Release
Priority
Focus
AFS
[FOCUS]
At the first picture
[RELEASE]
AFF/AFC
¢1
[FOCUS]
Normal focusing
¢2
[RELEASE]
Predicted focusing
¢3
MF Focus set with Manual Focus
AFS
AFS
A
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 54 ページ 2012年10月25日 木曜日 午後5時25分
55
Recording
(ENG) VQT4M51
Taking Pictures with the Self-timer
Applicable modes:
1
Set the drive mode dial to [ ].
2
Press the shutter button halfway to focus and then
press it fully to take the picture.
A When self-timer is set to [ ].
Changing the time setting for the self-timer
1 Select [Self Timer] in the [Rec] menu. (P23)
2 Press 3/4 to select the mode and then press [MENU/SET].
Exit the menu after it is set.
Recording Motion Picture
During HDMI output, you can record while monitoring motion pictures on the TV, etc.
Refer to P76 on how to connect with TV by using HDMI mini cable (optional).
You can record motion pictures while hearing the sounds that are being recorded by
connecting a commercially available headphones to this unit.
Do not use the headphone cables with the length of 3 m (9.8 feet) or more.
Excessive sound pressure from earphones and headphones can cause hearing loss.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
Item Settings
Picture is taken 10 seconds after shutter is pressed.
After 10 seconds the camera takes 3 pictures at about 2 seconds intervals.
Picture is taken 2 seconds after shutter is pressed.
Recording while monitoring camera images
Checking the sound while recording motion pictures
A
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 55 ページ 2012年10月25日 木曜日 午後5時25分
56
Recording
VQT4M51 (ENG)
Recording still pictures while recording motion
pictures
Applicable modes:
Still pictures can be recorded even while recording a motion picture. (Simultaneous
recording)
Recording motion pictures with manually set
aperture value/shutter speed
(Creative Video Mode)
Recording Mode:
It is possible to manually change the aperture and shutter speed and record motion
pictures.
1
Set the mode dial to [ ].
2
Select [Exposure Mode] in the [Motion Picture] menu. (P23)
3
Press 3/4 to select [P], [A], [S] or [M], and then press [MENU/SET].
The operation for changing the aperture value or shutter speed is the same as the
operation for setting the mode dial to , , or .
4
Start recording.
Press the motion picture button or the shutter button to start recording a motion picture.
(Still pictures cannot be taken.)
5
Stop recording.
Press the motion picture button or the shutter button to stop recording a motion picture.
During motion picture recording, press the shutter
button fully to record a still picture.
Simultaneous recording indicator A is displayed while recording still
pictures.
Recording with the Touch Shutter function is also available.
282828
A
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 56 ページ 2012年10月25日 木曜日 午後5時25分
57
Recording
(ENG) VQT4M51
Change the number of frames recorded and record motion pictures in slow and fast motion.
1 Select [Frame Rate] in the [Motion Picture] menu. (P23)
2 Press 3/4/2/1 to select the item and then press [MENU/SET].
For example, when a motion picture is recorded for 10 seconds with [ ], the length of
the recorded motion picture will be 5 seconds.
Exit the menu after it is set.
The operational sound of the zoom or button operation may be recorded when it is
operated during the recording of a motion picture.
Using touch icons allows silent operation while recording motion pictures.
Set [Silent Operation] in the [Motion Picture] menu to [ON].
1
Start recording.
2
Touch [ ].
3
Touch icon to display the setting screen.
4
Drag the slide bar to set.
The speed of the zoom operation varies depending on
the position you touch.
5
Stop recording.
Motion pictures in slow and fast motion
Item Settings
[OFF]
// Records 0.4 times, 0.48 times, and 0.8 times slower
// Records 1.6 times, 2.0 times, and 3.0 times faster
Minimizing operational sounds during motion picture recording
Zoom (When an interchangeable lens compatible with power
zoom is used)
Aperture value
Shutter speed
Exposure Compensation
ISO sensitivity
Mic level adjustment
[ ]/[ ] changes the setting slowly
[ ]/[ ] changes the setting quickly
40%
48%
80%
160%
200%
300%
200
%
F
SS
ISO
P
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 57 ページ 2012年10月25日 木曜日 午後5時25分
58
Recording
VQT4M51 (ENG)
Setting the recording method of time code
Applicable modes:
Time code represents the recording time by the units of hour,
minute, second and frame, and can be used as a time scale for
editing motion pictures. This unit automatically records time code
during motion picture recording.
Time codes are not recorded on motion pictures recorded when the
[Rec Mode] is set to [MP4].
1
Select [Time Code] in the [Motion Picture] menu. (P23)
2
Press 3/4 to select the item and then press [MENU/SET].
Settings Description of settings
[Time Code
Display]
[ON]/[OFF]
[Count Up]
[REC RUN]:
Counts the time code only when recording motion pictures.
[FREE RUN]:
Counts the time code even when not recording (including
when this unit is turned off).
[Time Code Value]
[Reset]:
Sets to 00:00:00:00 (hour: minute: second: frame)
[Manual Input]:
Manually input hour, minute, second and frame.
[Current Time]:
Sets hour, minute and second to current time and sets frame
to 00.
989898
TCTC 00:01:30:00TC 00:01:30:00
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 58 ページ 2012年10月25日 木曜日 午後5時25分
59
Wi-Fi
(ENG) VQT4M51
What you can do with the Wi-Fi
R
function
Linking with the Wi-Fi compatible equipment allows you to remotely operate the camera,
or share pictures with people in distant places even during recording or playing back.
[Remote Shooting] (P60) [Playback on TV] (P66)
Linking with a smartphone/tablet enables
the following:
Remote recording (P61)
Playing back the pictures in the camera (P62)
Saving the pictures in the camera to the
smartphone/tablet, or sending them to WEB
services. (P62)
Sending the acquired location information to
the camera. (P62)
By linking with the DLNA compatible TV,
you can display pictures on TV right
after taking them or display them on TV
later by playing them back on the
camera.
[Send Images While Recording] (P67) [Send Images Stored in the Camera] (P71)
Every time you take a picture, the picture
can be automatically sent to a specified
location. You can play back the picture on
the smartphone/tablet, or save and edit it
on PC.
Send to:
[Smartphone]/[PC]/[Cloud Sync. Service]/
[Web service]/[AV device]
You can select and send recorded images.
Send to:
[Smartphone]/[PC]/[Cloud Sync. Service]/
[Web service]/[AV device]/[Printer]
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 59 ページ 2012年10月25日 木曜日 午後5時25分
60
Wi-Fi
VQT4M51 (ENG)
[Remote Shooting]
You can remotely operate the camera using a smartphone/tablet.
You need to install “LUMIX LINK” on your smartphone/tablet.
The “LUMIX LINK” is an application provided by Panasonic that allows your smartphone/
tablet to perform the following operations of a Wi-Fi-compatible LUMIX.
The service may not be able to be used properly depending on the type of smartphone/tablet
being used. For compatible devices, see the following support site.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
When downloading the app on a mobile network, high packet communication fees may be
incurred depending on the details of your contract.
¢ To connect to this unit with [Wi-Fi Direct], Android OS 4.0 or above is required.
1 Press [Wi-Fi].
Installing the smartphone/tablet app “LUMIX LINK”
For Android
TM
apps For iOS apps
Version 2.1 (As of October 2012)
OS Android 2.2~Android 4.0
¢
iOS 4.3~iOS 6.0
Installation
procedure
1 Connect your Android device
to a network.
2 Select “Google Play
TM
Store”.
3 Enter “LUMIX LINK” into the
search box.
4 Select “LUMIX LINK” and
install it.
The icon will be added to the
menu.
1 Connect the iOS device to the
network.
2 Select “App Store
SM
”.
3 Enter “LUMIX LINK” into the
search box.
4 Select “LUMIX LINK” and
install it.
The icon will be added to the
menu.
Connecting to a smartphone/tablet
Preparations:
Install the “LUMIX LINK” in advance. (P60)
[Wi-Fi]/[Fn1] button can be used in two ways, as
[Wi-Fi] or as [Fn1] (function 1). At the time of
purchase, it is initially set to [Wi-Fi].
Refer to P25 for details about the function button.
ョㄏヒ
ヸㄊノョㄊ
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 60 ページ 2012年10月25日 木曜日 午後5時25分
61
Wi-Fi
(ENG) VQT4M51
2 Press 3/4 to select [New Connection], and then press
[MENU/SET].
When connecting with the setting you used before, you can
select the connection destination from [Select a destination from
History] (P62) or [Select a destination from Favorite] (P62).
3 Press 3/4 to select [Remote Shooting], and then press
[MENU/SET].
The information (SSID and password) required for directly
connecting your smartphone/tablet to this unit is displayed.
Select [ ] on the smartphone/tablet.
Motion pictures are recorded by timer recording. Set
the recording time in advance.
You cannot stop motion picture recording halfway from a
smartphone/tablet. To stop the recording, operate the camera.
A motion picture is not displayed on the screen of the
smartphone/tablet during while its recording is taking place.
The recorded images are saved in the camera.
Some settings are not available.
The screen differs depending on the operating system.
On your smartphone/tablet
(The default connection method is set to [Manual Connection].)
4 On the setting menu of your smartphone/tablet, turn on the Wi-Fi function.
5 Select the SSID that matches the one displayed on the sceen of this unit, and
then enter the password.
6 Start “LUMIX LINK” on your smartphone/tablet. (P60)
When the connection is complete, live images being captured by the camera are
displayed on the smartphone/tablet.
Taking pictures via a smartphone/tablet (remote recording)
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 61 ページ 2012年10月25日 木曜日 午後5時25分
62
Wi-Fi
VQT4M51 (ENG)
Select [ ] on a smartphone/tablet.
You can save pictures on the smartphone/tablet.
You can send pictures to a WEB service, etc.
The screen differs depending on the operating system.
Select [ ] on a smartphone/tablet.
The screen differs depending on the operating system.
If you want to make a Wi-Fi connection with the setting you used before, you can select it
from the history, and connect.
The number of settings that can be saved in the history is limited. It is recommended that you
save frequently used Wi-Fi connection settings in [Select a destination from Favorite].
Performing [Reset Wi-Fi Settings] clears the history and the contents saved in [Select a
destination from Favorite].
1 Press [Wi-Fi].
2 Press 3/4 to select [Select a destination from History], and then press [MENU/
SET].
3 Select the desired connection setting with 3/4, and then press [MENU/SET].
To display the connection detail, press [DISP.].
1 Press [Wi-Fi].
2 Press 3/4 to select [Select a destination from Favorite], and then press
[MENU/SET].
3 Select the desired connection setting with 3/4, and then press [MENU/SET].
To display the connection detail, press [DISP.].
Playing back pictures in the camera
Sending location information to the camera from a smartphone/tablet
[Select a destination from History]
[Select a destination from Favorite]
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 62 ページ 2012年10月25日 木曜日 午後5時25分
63
Wi-Fi
(ENG) VQT4M51
Selecting the connection method
You can select whether to connect via a wireless access point or connect directly.
Press 3/4 to select connection method, and then press [MENU/SET].
¢ WPS refers to a function that allows you to easily configure the settings related to the
connection and security of wireless LAN devices. To check if the wireless access point you
are using is compatible with WPS, refer to the manual of the wireless access point.
1 Press 3/4 to select the wireless access point you are connecting to, and press
[MENU/SET].
2 Enter the PIN code displayed on the camera screen into the wireless access
point.
3 Press [MENU/SET].
Refer to the wireless access point instruction manual for details.
Connecting via a wireless access point
Connection method Description of settings
[WPS (Push-Button)]
¢
Save push button type wireless access point that is
compatible with Wi-Fi Protected Setup
TM
with a WPS mark.
P63
[WPS (PIN code)]
Save PIN code type wireless access point that is
compatible with Wi-Fi Protected Setup with a WPS mark.
P63
[Manual Connection]
Select this option when you are not sure about the
WPS compatibility, or when you want to search for and
connect to a wireless access point.
P64
When connecting with [WPS (Push-Button)]
Press the wireless access point WPS button until it
switches to WPS Mode.
Refer to the wireless access point instruction manual for details.
e.g.:
When connecting with [WPS (PIN code)]
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 63 ページ 2012年10月25日 木曜日 午後5時25分
64
Wi-Fi
VQT4M51 (ENG)
Search for available wireless access points.
Confirm encryption key of the selected wireless access point if the network authentication is
encrypted.
When connecting by [Manual Input], confirm SSID, encryption type, encryption key of the
wireless access point you are using.
1 Press 3/4 to select the wireless access point you are
connecting to, and press [MENU/SET].
Touching [DISP.] will search for a wireless access point again.
If no wireless access point is found, refer to When connecting
with [Manual Input]
on P64.
2 (If network authentication is encrypted)
Enter the encryption key.
When connecting with [Manual Input]
1 On the screen displayed in step 1 of “If you are not sure
about the WPS compatibility (connecting by [Manual
Connection])”, select [Manual Input] by pressing 3/4, then press [MENU/SET].
2 Enter the SSID of the wireless access point you are connecting to, then select
[Set].
3 Press 3/4 to select the network authentication type, and press [MENU/SET].
For information on network authentication, see the manual of the wireless access point.
4 Press 3/4 to select the encryption type, and press [MENU/SET].
The type of settings that can be changed may vary depending on the details of network
authentication settings.
5 (When an option other than [No Encryption] is selected)
Enter the encryption key and select [Set].
If you are not sure about the WPS compatibility (connecting by [Manual
Connection])
Network authentication type Encryption types that can be set
[WPA2-PSK]/[WPA-PSK] [TKIP]/[AES]
[Common Key] [WEP]
[Open] [No Encryption]/[WEP]
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 64 ページ 2012年10月25日 木曜日 午後5時25分
65
Wi-Fi
(ENG) VQT4M51
Directly connect this unit to the device you are using as a wireless access point. You can
connect this unit and your device in a method supported by your device.
Press 3/4 to select connection method, and then press [MENU/SET].
Connecting directly
Connection method Description of settings
[Wi-Fi Direct]
TM
1 Set the device to Wi-Fi Direct mode.
2 Press 3/4 to select [Wi-Fi Direct] and then press
[MENU/SET].
3 Press 3/4 to select the device to connect to, and then
press [MENU/SET].
Read the operating instructions of your device for details.
[WPS Connection]
[WPS (Push-Button)]
1 Press 3/4 to select [WPS (Push-Button)] and then press
[MENU/SET].
2 Set the device to WPS mode.
You can wait longer for a connection by pressing the [DISP.]
button on this unit.
[WPS (PIN code)]
1 Press 3/4 to select [WPS (PIN code)] and then press
[MENU/SET].
2 Enter the PIN code of the device into this unit.
[Manual Connection]
Enter the SSID and password into the device. The SSID and
password are displayed on the connection waiting screen of this
unit.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 65 ページ 2012年10月25日 木曜日 午後5時25分
66
Wi-Fi
VQT4M51 (ENG)
[Playback on TV]
1 Press [Wi-Fi].
2 Press 3/4 to select [New Connection], and then press
[MENU/SET].
When connecting with the setting you used before, you can
select the connection destination from [Select a destination from
History] (P62) or [Select a destination from Favorite] (P62).
3 Press 3/4 to select [Playback on TV], and then press
[MENU/SET].
4 Press 3/4 to select connection method, and then press
[MENU/SET].
5 Press 3/4 to select a device you want to connect, and then press [MENU/SET].
When the connection is established, the screen is displayed.
6 Take or play back pictures on this unit.
To change the setting or disconnect, press [Wi-Fi].
Displaying the picture on TV right after taking it/Displaying the picture
on TV by playing it back on the camera
Preparations:
Set the TV to DLNA waiting Mode.
Read the operating instructions for your TV.
[Via Network]
When you want to connect to your TV via an wireless access point. (P63)
[Direct]
When you want to directly connect your TV to this unit with [Wi-Fi
Direct], [WPS Connection], or [Manual Connection]. (P65)
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 66 ページ 2012年10月25日 木曜日 午後5時25分
67
Wi-Fi
(ENG) VQT4M51
[Send Images While Recording]
A picture can be automatically sent to a specified device every time you take it.
Since the camera gives priority to recording, sending may take longer during the recording
of Burst pictures or motion pictures.
Motion pictures cannot be sent.
If you turn off this unit or the Wi-Fi connection before sending is complete, unsent pictures will
not be resent.
You may not be able to delete files or use the playback menu while sending.
When sending images on a mobile network, high packet communication fees may be incurred
depending on the details of your contract.
1 Press [Wi-Fi].
2 Press 3/4 to select [New Connection], and then press [MENU/SET].
When connecting with the setting you used before, you can select the connection
destination from [Select a destination from History] (P62) or [Select a destination from
Favorite] (P62).
3 Press 3/4 to select [Send Images While Recording], and then press [MENU/
SET].
4 Press 3/4 to select [Smartphone], and then press [MENU/SET].
5 Select the connection method.
6 Press 3/4 to select a device you want to connect, and then press [MENU/SET].
When the connection is complete, the screen is displayed. To change the send setting,
press [DISP.].
7 Take pictures.
The pictures are sent automatically after taking them.
To change the setting or disconnect, press [Wi-Fi].
You cannot change the settings while sending pictures. Wait until sending is complete.
When sending images to smartphone/tablet
Preparations:
Install the “LUMIX LINK” in advance. (P60)
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 67 ページ 2012年10月25日 木曜日 午後5時25分
68
Wi-Fi
VQT4M51 (ENG)
1 Press [Wi-Fi].
2 Press 3/4 to select [New Connection], and then press [MENU/SET].
When connecting with the setting you used before, you can select the connection
destination from [Select a destination from History] (P62) or [Select a destination from
Favorite] (P62).
3
Press
3
/
4
to select [Send Images While Recording], and then press [MENU/SET].
4 Press 3/4 to select [PC], and then press [MENU/SET].
5 Press 3/4 to select connection method, and then press [MENU/SET].
6
Press
3
/
4
to select the PC you want to connect to, and then press [MENU/SET].
7 Press 3/4 to select the folder you want to send, and then press [MENU/SET].
When the connection is complete, the screen is displayed. To change the send setting,
press [DISP.].
8 Take pictures.
To change the setting or disconnect, press [Wi-Fi].
You cannot change the settings while sending pictures. Wait until sending is complete.
When sending images to PC
Preparations:
Turn the computer on.
Prepare folders for receiving images on the PC before sending a picture to the PC.
[Via Network]
When you want to connect to your PC via a wireless access point. (P63)
[Direct]
When you want to directly connect your PC to this unit with [Wi-Fi
Direct], [WPS Connection], or [Manual Connection]. (P65)
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 68 ページ 2012年10月25日 木曜日 午後5時25分
69
Wi-Fi
(ENG) VQT4M51
1 Press [Wi-Fi].
2 Press 3/4 to select [New Connection], and then press [MENU/SET].
When connecting with the setting you used before, you can select the connection
destination from [Select a destination from History] (P62) or [Select a destination from
Favorite] (P62).
3
Press
3
/
4
to select [Send Images While Recording], and then press [MENU/SET].
4 Press 3/4 to select [Cloud Sync. Service], and then press [MENU/SET].
5 Press 3/4 to select connection method, and then press [MENU/SET]. (P63)
6 Check the send setting.
When the connection is complete, the screen is displayed. To change the send setting,
press [DISP.].
7 Take pictures.
To change the setting or disconnect, press [Wi-Fi].
You cannot change the settings while sending pictures. Wait until sending is complete.
1 Press [Wi-Fi].
2 Press 3/4 to select [New Connection], and then press [MENU/SET].
When connecting with the setting you used before, you can select the connection
destination from [Select a destination from History] (P62) or [Select a destination from
Favorite] (P62).
3
Press
3
/
4
to select [Send Images While Recording], and then press [MENU/SET].
4 Press 3/4 to select [Web service], and then press [MENU/SET].
5 Press 3/4 to select connection method, and then press [MENU/SET]. (P63)
6 Press 3/4/2/1 to select a WEB service you want to connect, and then press
[MENU/SET].
When the connection is complete, the screen is displayed. To change the send setting,
press [DISP.].
7 Take pictures.
To change the setting or disconnect, press [Wi-Fi].
You cannot change the settings while sending pictures. Wait until sending is complete.
When sending images to [Cloud Sync. Service]
Preparations:
You need to register to “LUMIX CLUB” and configure the Cloud Sync. setting to send a
picture to a Cloud Folder.
When sending images to WEB Service
Preparations:
You need to register to “LUMIX CLUB” to send a picture to a WEB service.
When sending images to WEB services, such as Facebook or YouTube, the WEB service
being used must be registered with the “LUMIX CLUB”. Registering multiple WEB
services will send images to all services simultaneously.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 69 ページ 2012年10月25日 木曜日 午後5時25分
70
Wi-Fi
VQT4M51 (ENG)
1 Press [Wi-Fi].
2 Press 3/4 to select [New Connection], and then press [MENU/SET].
When connecting with the setting you used before, you can select the connection
destination from [Select a destination from History] (P62) or [Select a destination from
Favorite] (P62).
3 Press 3/4 to select [Send Images While Recording], and then press [MENU/
SET].
4 Press 3/4 to select [AV device], and then press [MENU/SET].
5 Press 3/4 to select [Home] or [External], and then press [MENU/SET].
6 Press 3/4 to select connection method, and then press [MENU/SET].
When [External] is selected, the screen for setting a wireless access point is displayed.
(P63)
7 Press 3/4 to select a device you want to connect, and then press [MENU/SET].
When the connection is complete, the screen is displayed. To change the send setting,
press [DISP.].
8 Take pictures.
To change the setting or disconnect, press [Wi-Fi].
You cannot change the settings while sending pictures. Wait until sending is complete.
When sending images to AV device
Preparations:
When sending a picture to [Home], set your device to DLNA waiting mode.
Read the operating instructions of your device for details.
When sending images to [External], the following are required:
Registration to “LUMIX CLUB”.
Address number and access number acquired by the destination External AV device.
[Via Network]
When you want to connect to an AV device via a wireless access
point. (P63)
[Direct]
When you want to directly connect an AV device to this unit with
[Wi-Fi Direct], [WPS Connection], or [Manual Connection]. (P65)
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 70 ページ 2012年10月25日 木曜日 午後5時25分
71
Wi-Fi
(ENG) VQT4M51
[Send Images Stored in the Camera]
When sending images on a mobile network, high packet communication fees may be incurred
depending on the details of your contract.
Details of the playback menu [Favorite] or [Print Set] settings will not be sent.
Some images taken with a different camera may not be able to be sent.
Images that have been modified or edited with a computer may not be able to be sent.
1 Press [Wi-Fi].
2 Press 3/4 to select [New Connection], and then press [MENU/SET].
When connecting with the setting you used before, you can select the connection
destination from [Select a destination from History] (P62) or [Select a destination from
Favorite] (P62).
3 Press 3/4 to select [Send Images Stored in the Camera], and then press
[MENU/SET].
4
Press
3
/
4
to select [Smartphone], and then press [MENU/SET].
5 Select the connection method.
6 Press 3/4 to select a device you want to connect, and then press [MENU/SET].
When the connection is complete, the screen is displayed. To change the send setting,
press [DISP.].
7
Press
3
/
4
to select [Single Select] or [Multi Select] and then press [MENU/SET].
To change the setting or disconnect, press [Wi-Fi].
8 Select and send the images.
When sending images to smartphone/tablet
Preparations:
Install the “LUMIX LINK” in advance. (P60)
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 71 ページ 2012年10月25日 木曜日 午後5時25分
72
Wi-Fi
VQT4M51 (ENG)
1 Press [Wi-Fi].
2 Press 3/4 to select [New Connection], and then press [MENU/SET].
When connecting with the setting you used before, you can select the connection destination
from [Select a destination from History] (P62) or [Select a destination from Favorite]. (P62)
3
Press
3
/
4
to select [Send Images Stored in the Camera], and then press [MENU/SET].
4 Press 3/4 to select [PC], and then press [MENU/SET].
5 Press 3/4 to select connection method, and then press [MENU/SET].
6 Press 3/4 to select a PC you want to connect, and then press [MENU/SET].
7 Press 3/4 to select the folder you want to send, and then press [MENU/SET].
When the connection is complete, the screen is displayed. To change the send setting,
press [DISP.].
8
Press
3
/
4
to select [Single Select] or [Multi Select] and then press [MENU/SET].
To change the setting or disconnect, press [Wi-Fi].
9 Select and send the images.
1 Press [Wi-Fi].
2 Press 3/4 to select [New Connection], and then press [MENU/SET].
When connecting with the setting you used before, you can select the connection destination
from [Select a destination from History] (P62) or [Select a destination from Favorite]. (P62)
3
Press
3
/
4
to select [Send Images Stored in the Camera], and then press [MENU/SET].
4 Press 3/4 to select [Cloud Sync. Service], and then press [MENU/SET].
5 Press 3/4 to select connection method, and then press [MENU/SET]. (P63)
6 Check the send setting.
When the connection is complete, the screen is displayed. To change the send setting,
press [DISP.].
7
Press
3
/
4
to select [Single Select] or [Multi Select] and then press [MENU/SET].
To change the setting or disconnect, press [Wi-Fi].
8 Select and send the images.
When sending images to PC
Preparations:
Turn the computer on.
Prepare folders for receiving images on the PC before sending a picture to the PC.
[Via Network]
When you want to connect to your PC via a wireless access point. (P63)
[Direct]
When you want to directly connect your PC to this unit with [Wi-Fi
Direct], [WPS Connection], or [Manual Connection]. (P65)
When sending images to [Cloud Sync. Service]
Preparations:
You need to register to “LUMIX CLUB” and configure the Cloud Sync. setting to send a
picture to a Cloud Folder.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 72 ページ 2012年10月25日 木曜日 午後5時25分
73
Wi-Fi
(ENG) VQT4M51
1 Press [Wi-Fi].
2 Press 3/4 to select [New Connection], and then press [MENU/SET].
When connecting with the setting you used before, you can select the connection
destination from [Select a destination from History] (P62) or [Select a destination from
Favorite]. (P62)
3 Press 3/4 to select [Send Images Stored in the Camera], and then press
[MENU/SET].
4 Press 3/4 to select [Web service], and then press [MENU/SET].
5 Press 3/4 to select connection method, and then press [MENU/SET]. (P63)
6 Press 3/4/2/1 to select a WEB service you want to connect, and then press
[MENU/SET].
When the connection is complete, the screen is displayed. To change the send setting,
press [DISP.].
7 Press 3/4 to select [Single Select] or [Multi Select] and then press [MENU/
SET].
To change the setting or disconnect, press [Wi-Fi].
8 Select and send the images.
When sending images to WEB Service
Preparations:
You need to register to “LUMIX CLUB” to send a picture to a WEB service.
When sending images to WEB services, such as Facebook or YouTube, the WEB service
being used must be registered with the “LUMIX CLUB”. Registering multiple WEB
services will send images to all services simultaneously.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 73 ページ 2012年10月25日 木曜日 午後5時25分
74
Wi-Fi
VQT4M51 (ENG)
1 Press [Wi-Fi].
2 Press 3/4 to select [New Connection], and then press [MENU/SET].
When connecting with the setting you used before, you can select the connection
destination from [Select a destination from History] (P62) or [Select a destination from
Favorite]. (P62)
3 Press 3/4 to select [Send Images Stored in the Camera], and then press
[MENU/SET].
4 Press 3/4 to select [AV device], and then press [MENU/SET].
5
Press
3
/
4
to select [Home] or [External], and then press [MENU/SET].
6 Press 3/4 to select connection method, and then press [MENU/SET].
When [External] is selected, the screen for setting a wireless access point is displayed.
(P63)
7 Press 3/4 to select a device you want to connect, and then press [MENU/SET].
When the connection is complete, the screen is displayed. To change the send setting,
press [DISP.].
8 Press 3/4 to select [Single Select] or [Multi Select] and then press [MENU/
SET].
To change the setting or disconnect, press [Wi-Fi].
9 Select and send the images.
When sending images to AV device
Preparations:
When sending a picture to [Home], set your device to DLNA waiting mode.
Read the operating instructions of your device for details.
When sending images to [External], the following are required:
Registration to “LUMIX CLUB”.
Address number and access number acquired by the destination External AV device.
[Via Network]
When you want to connect to an AV device via a wireless access
point. (P63)
[Direct]
When you want to directly connect an AV device to this unit with
[Wi-Fi Direct], [WPS Connection], or [Manual Connection]. (P65)
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 74 ページ 2012年10月25日 木曜日 午後5時25分
75
Wi-Fi
(ENG) VQT4M51
1 Press [Wi-Fi].
2 Press 3/4 to select [New Connection], and then press [MENU/SET].
When connecting with the setting you used before, you can select the connection
destination from [Select a destination from History] (P62) or [Select a destination from
Favorite] (P62).
3 Press 3/4 to select [Send Images Stored in the Camera], and then press
[MENU/SET].
4 Press 3/4 to select [Printer], and then press [MENU/SET].
5 Press 3/4 to select connection method, and then press [MENU/SET].
6 Press 3/4 to select a printer you want to connect, and then press [MENU/SET].
7 Select pictures, and then print. (P80)
To change the setting or disconnect, press [Wi-Fi].
When sending images to Printer
Preparations:
You can print out recorded pictures wirelessly from a PictBridge (wireless LAN-compatible)
¢
printer.
¢ Compliant with the DPS over IP standards.
See the following website for information on the PictBridge (wireless LAN-compatible) printer.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
[Via Network]
When you want to connect to your Printer via a wireless access
point. (P63)
[Direct]
When you want to directly connect your printer to this unit with
[Wi-Fi Direct], [WPS Connection], or [Manual Connection]. (P65)
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 75 ページ 2012年10月25日 木曜日 午後5時25分
76
Connecting to other equipment
VQT4M51 (ENG)
Playing Back Pictures on a TV Screen
1
Connect the camera and a TV.
Check the direction of the terminals and plug in/out straight holding onto the plug. (It
may result in malfunction by the deforming of the terminal if it is plugged in obliquely or
in wrong direction.)
2
Turn on the TV and select the input to match the connector in use.
3
Turn the camera on and then press [(].
Input of the TV will switch automatically and playback screen is displayed when
connected to a VIERA Link compatible TV using an HDMI mini cable with the [VIERA
Link] set to [ON].
Preparations: Turn this unit and the TV off.
To connect with an HDMI mini cable (optional)
Always use a genuine Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30: optional).
Part numbers: RP-CDHM15 (1.5 m) (5 feet), RP-CDHM30 (3.0 m) (10 feet)
To connect with an AV cable (optional)
Always use a genuine Panasonic AV cable (DMW-AVC1: optional).
A HDMI mini cable (optional)
B HDMI socket
C AV cable (optional)
D Yellow: to the video input socket
E White: to the audio input socket
F Align the marks, and insert.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 76 ページ 2012年10月25日 木曜日 午後5時25分
77
Connecting to other equipment
(ENG) VQT4M51
Saving still pictures and motion pictures on your
PC
PC that can be used
The unit can be connected to any PC capable of recognising a mass storage device.
PHOTOfunSTUDIO 8.5 PE (Windows XP/Vista/7)
This software allows you to acquire pictures to the PC, and also categorise these acquired
pictures by their recording date or the model name of the camera used.
SILKYPIX Developer Studio
(Windows XP/Vista/7, Mac OS X v10.4/v10.5/v10.6/v10.7/v10.8)
This is software to edit RAW format images.
LoiLoScope 30 day full trial version (Windows XP/Vista/7)
LoiLoScope is a video editing software where that draws out the full power of your PC.
This will only install a shortcut to the trial version download site.
Windows support: Windows 7/Windows Vista/Windows XP
Mac support: OS X v10.1 ~ v10.8
AVCHD motion pictures may not be imported correctly when copied as files or folder.
With Windows, always import AVCHD motion pictures using “PHOTOfunSTUDIO”, one of
the programmes on the CD-ROM (supplied).
With a Mac, AVCHD motion pictures can be imported using “iMovie’11”.
Note that motion pictures (AVCHD Progressive) recorded in [FHD/50p] of [AVCHD] cannot
be imported.
(For details about iMovie’11, please contact Apple Inc.)
About the supplied software
For details on how to use the SILKYPIX Developer Studio, refer to the “Help” or the
Ichikawa Soft Laboratory’s support website:
http://www.isl.co.jp/SILKYPIX/english/p/support/
For more information on how to use LoiLoScope, read the LoiLoScope manual
available for download at the link below.
Manual URL: http://loilo.tv/product/20
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 77 ページ 2012年10月25日 木曜日 午後5時25分
78
Connecting to other equipment
VQT4M51 (ENG)
Installing supplied software
Before inserting the CD-ROM, close all running applications.
1
Check the environment of your PC.
Operating environment of “PHOTOfunSTUDIO 8.5 PE
OS:
Windows
R
XP (32bit) SP3,
Windows Vista
R
(32bit) SP2,
Windows
R
7 (32bit/64bit) or SP1
CPU:
Pentium
R
III 500 MHz or higher (Windows
R
XP),
Pentium
R
III 800 MHz or higher (Windows Vista
R
),
Pentium
R
III 1 GHz or higher (Windows
R
7)
Display:
1024k768 pixels or more (1920k1080 pixels or more recommended)
RAM:
512 MB or more (Windows
R
XP/Windows Vista
R
),
1 GB or more (Windows
R
7 32bit),
2 GB or more (Windows
R
7 64bit)
Free hard disk space:
450 MB or more for installing software
Refer to the operating instructions of “PHOTOfunSTUDIO” (PDF) for further operating
environment.
For details on SILKYPIX Developer Studio 3.1 SE, please read the support site given on
P77.
2
Insert the CD-ROM with the supplied software.
When you insert the supplied CD-ROM, the install menu will start.
3
Click on the [Recommended Installation].
Proceed with installation according to messages appearing on the screen.
The software compatible with your PC will be installed.
PHOTOfunSTUDIO” is not compatible with Mac.
On the Mac, SILKYPIX can be installed manually.
1 Insert the CD-ROM with the supplied software.
2 Double-click on the automatically displayed folder.
3 Double-click the icon in the application folder.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 78 ページ 2012年10月25日 木曜日 午後5時25分
79
Connecting to other equipment
(ENG) VQT4M51
Transferring pictures to a PC
1
Connect the computer and camera with the USB connection cable
(supplied).
Please turn this unit on and your PC before connecting.
Turn the monitor toward you.
Check the directions of the connectors, and plug them straight in or unplug them
straight out. (Otherwise, the connectors may bend out of shape, which will cause a
malfunction.)
Do not use any other USB connection cables except the supplied one or a genuine
Panasonic USB connection cable (DMW-USBC1: optional).
A USB connection cable (supplied)
B Align the marks, and insert.
2
Press 3/4 to select [PC], and then press [MENU/SET].
If [USB Mode] is set to [PC] in the [Setup] menu in advance, the camera will be
automatically connected to the PC without displaying the [USB Mode] selection screen.
When the camera is connected to a PC while [USB Mode] is set to [PictBridge(PTP)], a
message may appear on the PC screen. In that case, close the message, and remove
the USB connection cable safely, and then set the
[USB Mode] to [PC].
3
Copy the images to a PC using “PHOTOfunSTUDIO.
Do not delete or move copied files or folders in Windows Explorer. When viewing in
PHOTOfunSTUDIO”, you will not be able to play back or edit.
Preparations: Install “PHOTOfunSTUDIO” to the PC.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 79 ページ 2012年10月25日 木曜日 午後5時25分
80
Connecting to other equipment
VQT4M51 (ENG)
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to
be printed out and instruct that printing be started on the camera’s monitor.
Grouped pictures are displayed individually.
Some printers can print directly from the card removed from the camera. For details, refer to
the operating instructions of your printer.
1
Connect the printer and camera with the USB connection cable
(supplied).
Turn the monitor toward you.
Check the directions of the connectors, and plug them straight in or unplug them
straight out. (Otherwise, the connectors may bend out of shape, which will cause a
malfunction.)
Do not use any other USB connection cables except the supplied one or a genuine
Panasonic USB connection cable (DMW-USBC1: optional).
A USB connection cable (supplied)
B Align the marks, and insert.
2
Press 3/4 to select [PictBridge(PTP)], and then press [MENU/SET].
1 Press 3.
2 Press 3/4 to select an item and then press [MENU/SET].
Preparations: Turn on the camera and the printer.
Perform the print quality and other settings at the printer before printing the
pictures.
Selecting a single picture and printing it
1 Press 2/1 to select the picture and then press [MENU/SET].
2 Press 3 to select [Print start] and then press [MENU/SET].
Disconnect the USB connection cable after printing.
Selecting multiple pictures and printing them
3 Press 3 to select [Print start] and then press [MENU/SET].
If the print check screen has appeared, select [Yes], and print the pictures.
Disconnect the USB connection cable after printing.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 80 ページ 2012年10月25日 木曜日 午後5時25分
81
Others
(ENG) VQT4M51
Monitor Display/Viewfinder Display
The following images are examples of when the display screen is set to [ ] (monitor
style) in the monitor.
In recording
Recording in Programme AE Mode [ ]
1 Recording Mode
2 Photo Style
3 Flash Mode
4 REC MODE (when recording motion
pictures)/Recording quality
5 Picture size
6 Quality
7 Focus Mode
8 AF Mode
9 : Single
¢1
:Burst
: Auto Bracket
:Self-timer
10 Battery indication
11
: Optical Image Stabiliser
¢2
/
: Jitter alert
12 Recording state (Flashes red.)/
Focus (Lights green.)
13 Touch tab
¢3
14 Touch zoom
¢3
15 Touch Shutter
¢3
16 Fn6 (Function button)
¢3
17 Fn7 (Function button)
¢3
18 Number of recordable pictures
¢4
19 Extra Tele Conversion (when taking still
pictures)
20 ISO sensitivity
21 Exposure compensation value/
Brightness/Manual Exposure
Assistance
22 Shutter speed
23 Aperture value
24 Metering Mode
25 Exposure meter
Focal distance display
Step zoom
26 AF area
27 Card (displayed only during recording)/
Elapsed recording time:
¢
5
¢1 Displayed only on the on-monitor recording
information screen.
¢2 Only available when a lens that supports
the Stabiliser function is attached.
¢3 Only displayed in the monitor.
¢4 It is possible to switch the display between
the number of recordable pictures and
available recording time with the
[Remaining Disp.] setting in the [Custom]
menu.
¢5 “m” is an abbreviation for minute and “s” for
second.
98
98
98
2
00
00
2
00
2
00
60
60
602.8
2.8
2.8
0
0
AFS
AFS
AFS
×
×
Fn7
Fn7
Fn7Fn7
12
13
18
21222324 1920
25
26
27
1 23 45 6 87 9 10
14
15
16
17
11
AVCHD
FHD
50i
Fn6
Fn6
Fn6Fn6
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 81 ページ 2012年10月25日 木曜日 午後5時25分
82
Others
VQT4M51 (ENG)
In playback Detailed information
display
Histogram display
1 Playback Mode
2 : Motion picture playback/
: Continuously Burst Picture
Group Playback
: Continuously [Time Lapse Shot]
Picture Group Playback
3 Protected picture
4 Number of prints
5Picture size
Recording mode (when recording
motion pictures)
: Recording quality
6Quality
7 Battery indication
8 Picture number/Total pictures
9 Number of pictures in burst/
Motion picture recording time:
¢1
10 Playback (Motion Picture, Group
pictures)
11 Multi Playback
12 Delete
13 Recording information
¢2
: Intelligent Dynamic Range Control
: HDR
: Intelligent Resolution
: [Shading Comp.]
14 Age
15 Burst Picture Group Display
: [Time Lapse Shot] Picture Group
Display
16 Name
¢3
/Location
¢3
/Title
¢3
17 Number of days that have passed since
the departure date
18 Currently retrieving information icon
19 Stamped with text indication
Elapsed playback time:
¢1
20 Favourites
Cable disconnection prohibit icon
21 Folder/File number
¢2
22 Colour space
¢4
23 Recorded date and time/World Time
24 Histogram
¢1 “m” is an abbreviation for minute and “s” for
second.
¢2 This is not displayed for motion pictures
recorded in [AVCHD].
¢3 It is displayed in order of [Title], [Location],
[Name] ([Baby1]/[Baby2], [Pet]), [Name]
([Face Recog.]).
¢4 This is not displayed for motion pictures
recorded in [AVCHD]/[MP4]/[MOV].
606060
F2.8F2.8F2.8
00
AWBAWBAWB
11
1/981/981/98
2
0000
2
00
2
00
67'$<67'$<67'$<67'$<
PRQWK GD\VPRQWK GD\VPRQWK GD\VPRQWK GD\V
9 pic.9 pic.9 pic.
1 2 4 5 6 73
8
11
12
10
9
1314
3s3s3s
20
19
16
15
17
18
100-0001
F2.8
60
P
s
RGB
AFS
200
0
WBWB
ISOISO
AWB
STD.STD.STD.
'(&
212265
13
23
F2.8
60
1/98
ISO
200
0
100-0001
21 13248
AVCHD
FHD
50i
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 82 ページ 2012年10月25日 木曜日 午後5時25分
83
Others
(ENG) VQT4M51
Menu list
This menu lets you set the aspect ratio, number of pixels and other aspects of the pictures
you are recording.
[Rec]
[Photo Style]
You can select effects to match the type of image you wish to
record. You can adjust the colour and image quality of the
effects.
[Aspect Ratio] Sets the aspect ratio of the image.
[Picture Size] Set the number of pixels.
[Quality] Set the compression rate at which the pictures are to be stored.
[Metering Mode] Sets the light metering method for measuring brightness.
[Burst Rate] Sets the burst speed for burst recording. (P53)
[Auto Bracket]
Sets single/burst recording, compensation range and recording
sequence for Auto Bracket recording. (P54)
[Self Timer]
Set the time delay for the self-timer recording. (P55)
[i.Dynamic] (Intelligent
dynamic range control)
Automatically corrects contrast and exposure.
[i.Resolution]
Records pictures with more defined outlines and sense of
clarity.
[HDR]
You can combine 3 pictures with different levels of exposure
into a single picture with rich gradation.
[Multi Exp.]
Gives an effect like multi exposure. (up to 4 times equivalent
per a single image)
[Time Lapse Shot]
You can set the recording start time, the recording interval and
the number of pictures, and automatically record subjects such
as animals and plants as time elapses.
[Electronic Shutter]
The electronic shutter can reduce the picture blur.
[Shutter Delay]
To reduce the influence of hand shake, shutter is released after
the specified time has passed.
[Flash] Sets the manner in which the flash works. (P44)
[Red-Eye Removal]
Automatically detects red-eye caused by the flash and corrects
the image data accordingly.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 83 ページ 2012年10月25日 木曜日 午後5時25分
84
Others
VQT4M51 (ENG)
[ISO Increments]
The ISO sensitivity settings values changes in steps of 1/3 EV
or 1 EV.
[Extended ISO]
Allows you to adjust the ISO from the minimum [ISO125] to the
maximum [ISO25600].
[Long Shtr NR]
You can eliminate the noise caused by recording with a slower
shutter speed.
[Shading Comp.]
If the screen periphery darkens as a result of lens
characteristics, the brightness in this region will be corrected.
[Ex. Tele Conv.]
When the number of pixels is set to anything other than [L], the
Tele effect is increased without degradation in image quality.
(P43)
[Digital Zoom]
Increases the Tele effect. The higher the level of magnification,
the greater the degradation in image quality. (P43)
[Color Space]
Set this when you want to correct the colour reproduction of the
recorded pictures on a PC, printer etc.
[Stabilizer]
When camera shake is sensed during recording, the camera
corrects it automatically.
[Face Recog.]
Sets the focus and exposure automatically prioritising
registered faces.
[Profile Setup]
If you set the name and birthday of your baby or pet in
advance, you can record their name and age in months and
years in the images.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 84 ページ 2012年10月25日 木曜日 午後5時25分
85
Others
(ENG) VQT4M51
This menu lets you set the [Rec Mode], [Rec Quality], and other aspects for motion picture
recording.
[Photo Style], [Metering Mode], [i.Dynamic], [i.Resolution] and [Digital Zoom] are common to
both the [Rec] menu and [Motion Picture] menu. Changing these settings in one of these
menus is reflected in other menu.
For details, refer to the explanation for the corresponding setting in the [Rec] menu.
[Motion Picture]
[Rec Mode]
Sets the file format for the motion pictures you record.
[Rec Quality]
This sets up the picture quality of motion pictures.
[Exposure Mode]
Select the method for setting the aperture value and shutter
speed in Creative Video Mode. (P56)
[Frame Rate]
Adds the slow/quick effect to motion pictures in Creative Video
Mode. (P57)
[Picture Mode]
Sets the recording method for still pictures during motion
picture recording.
[Continuous AF]
Continues to focus on the subject for which focus has been
achieved.
[Time Code]
Sets the time code. (P58)
[Rec Highlight]
White saturated areas appear blinking in black and white.
[Ex. Tele Conv.]
Increases the Tele effect. (P43)
[Flkr Decrease]
The shutter speed can be fixed to reduce the flicker or striping
in the motion picture.
[Silent Operation]
Enables touch operations to allow silent use while recording
motion pictures.
[Mic Level Disp.]
Set whether or not the mic levels are displayed on the screen.
[Mic Level Adj.]
Adjust the sound input level to 19 different levels.
[Special Mic.]
Sets the sound recording method when a stereo shotgun
microphone (optional) is connected.
[Headphone Sound]
Sets the sound output method when headphones (optional) are
connected.
[Wind Cut]
Reduces the wind noise effectively if there is wind noise when
recording sound.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 85 ページ 2012年10月25日 木曜日 午後5時25分
86
Others
VQT4M51 (ENG)
Operation of the unit, such as displaying of the screen and button operations, can be set
up according to your preferences. Also, it is possible to register the modified settings.
[Custom]
[Cust.Set Mem.]
Registers the current camera settings as custom set. (P42)
[AF/AE Lock]
Sets the fixed content for focusing and exposure when the AF/
AE lock is on. (P52)
[AF/AE Lock Hold]
This will set the operation of [AF/AE LOCK] button when taking
a picture with fixed focus or exposure.
[Shutter AF]
Set whether or not the focus is adjusted automatically when the
shutter button is pressed halfway.
[Half Press Release]
The shutter will immediately fire when the shutter button is
pressed halfway.
[AFS/AFF] Assigns [AFS] or [AFF] to [AFS/AFF] of the focus mode lever.
[Quick AF]
Speeds up the focusing that takes place when you press the
shutter button.
[Eye Sensor AF]
The camera automatically adjusts the focus when the eye
sensor is active.
[Pinpoint AF Time]
Sets the time for which the screen is enlarged when the shutter
button is pressed halfway with Auto Focus Mode set to [ ].
[AF Assist Lamp]
AF assist lamp will illuminate the subject when the shutter
button is pressed half-way making it easier for the camera to
focus when recording in low light conditions.
[Direct Focus Area]
Moves the AF area or MF assist using the cursor button when
recording.
[Focus/Release Priority]
It will set so no picture can be taken when it is out of focus.
[AF+MF]
You can set the focus manually after the automatic focus has
finished.
[MF Assist] Sets the display method of MF Assist (enlarged screen).
[MF Guide]
When you set the focus manually, an MF guide that allows you
to check the direction to achieve focus is displayed. (P51)
[Histogram]
This allows you to set either to display or not display the
histogram.
[Guide Line]
This will set the pattern of guide lines displayed when taking a
picture.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 86 ページ 2012年10月25日 木曜日 午後5時25分
87
Others
(ENG) VQT4M51
[Highlight]
When the Auto Review function is activated or when playing
back, white saturated areas appear blinking in black and white.
[Constant Preview]
You can check the effects of the chosen aperture and shutter
speed on the recording screen in Manual Exposure Mode.
[Expo.Meter] Set whether or not to display the exposure meter.
[LVF Disp.Style] This will set the display style of the Live Viewfinder.
[Monitor Disp. Style] This will set the display style of the monitor.
[Monitor Info. Disp.] Display the recording information screen. (P28)
[Rec Area]
This changes the angle of view during motion picture recording
and still picture recording.
[Remaining Disp.]
This will switch display between the number of recordable
pictures and available recording time.
[Auto Review]
Set the length of time that the picture is displayed after taking
the still picture.
[Fn Button Set]
You can assign various recording and other functions to the
function button. (P25)
[Q.MENU]
Switch the setting method of Quick Menu.
[Dial Set.] Changes the operation methods of the front dial and rear dial.
[Video Button]
Enables/disables the motion picture button.
[Power Zoom Lens]
Sets the screen display and lens operations when using an
interchangeable lens that is compatible with power zoom
(electrically operated zoom).
[Eye Sensor]
Enable or disable the eye sensor. You can also set the
sensitivity of the eye sensor. (P22)
[Touch Settings]
Enables/disables the Touch operation.
[Touch Scroll]
This allows you to set the speed of continuously forwarding or
rewinding pictures using touch operation.
[Menu Guide]
Set the screen that is displayed when the mode dial is set to
and .
[Shoot w/o Lens]
Sets whether or not the shutter can be released when no lens
is attached to the main body.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 87 ページ 2012年10月25日 木曜日 午後5時25分
88
Others
VQT4M51 (ENG)
This menu lets you perform the clock settings, select the operating beep tone settings and
set other settings which make it easier for you to operate the camera.
You can also configure the settings of Wi-Fi related functions.
[Setup]
[Clock Set]
Setting Date/Time. (P21)
[World Time]
Sets the times for the region where you live and your holiday
destination.
[Travel Date]
Departure date and return date of the trip as well as the name
of the travel destination can be set.
[Wi-Fi]
Configure the each setting for Wi-Fi functions.
[Beep]
Set the volume for electronic noises and the electronic shutter
noise.
[Speaker Volume]
Adjust the volume of the speaker to any of 7 levels.
[Headphone Volume]
Adjust the volume of when connected headphone (optional)
from 16 levels.
[Monitor Display]/
[Viewfinder]
Brightness, colour, or red or blue tint of the Monitor/Live
Viewfinder is adjusted.
[Monitor Luminance]
Set the monitor brightness to suit the amount of surrounding
light.
[Economy]
Suppresses the unit’s power consumption to prevent the
battery from being run down.
[Battery Use Priority]
When batteries are inserted to both this unit and the battery
grip, you can set that which battery should be used first.
[USB Mode]
Sets the communication method when connecting using the
USB connection cable (supplied).
[Output]
This sets how the unit connects to a television etc.
[VIERA Link]
Equipment that supports the VIERA Link will connect
automatically.
[3D Playback]
Set the output method for 3D pictures.
[Menu Resume]
Stores the location of the last-used menu item for each menu.
[Menu Background]
Set the background colour for the menu screen.
[Menu Information]
Descriptions of menu items or their settings are displayed on
the menu screen.
[Language] Set the language displayed on the screen.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 88 ページ 2012年10月25日 木曜日 午後5時25分
89
Others
(ENG) VQT4M51
[Version Disp.]
This enables the firmware versions of the camera and lens to
be checked.
[No.Reset]
Returns the image file number to 0001.
[Reset]
The [Rec] or [Setup]/[Custom] menu settings are reset to the
initial settings.
[Reset Wi-Fi Settings]
Reset all settings in the [Wi-Fi] menu to factory default settings.
(excluding [LUMIX CLUB])
[Pixel Refresh]
It will perform optimisation of imaging device and image
processing.
[Sensor Cleaning]
Dust reduction to blow off the debris and dust that have affixed
to the front of the imaging device is performed.
[Format] The card is formatted.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 89 ページ 2012年10月25日 木曜日 午後5時25分
90
Others
VQT4M51 (ENG)
This menu lets you set the Protection, Cropping or Print Settings, etc. of recorded pictures.
[Playback]
[2D/3D Settings] Switches the playback method for 3D images.
[Slide Show] Selects the type etc. of the images and plays back in order.
[Playback Mode]
Selects the type etc. of the images and plays back only
particular images.
[Location Logging]
The location information (longitude/latitude) acquired by the
smartphone/tablet can be sent to the camera and written in
images.
[Title Edit] Input texts (comments) on the recorded pictures.
[Text Stamp]
Stamps the recorded pictures with recording date and time,
names, travel destination, travel date, etc.
[Video Divide]
Splits the recorded motion picture in two.
[Resize]
Reduces the image size (number of pixels).
[Cropping]
Crops the recorded image.
[Rotate]
Rotate pictures manually in 90o steps.
[Rotate Disp.]
This mode allows you to display pictures vertically if they were
recorded holding the camera vertically.
[Favorite]
Marks can be added to images, and images can be set as
favourites.
[Print Set] Sets the images for printing and the number of prints.
[Protect] Protects images to prevent deletion by mistake.
[Face Rec Edit] Removes or changes information relating to personal identity.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 90 ページ 2012年10月25日 木曜日 午後5時25分
91
Others
(ENG) VQT4M51
Cautions for Use
Keep this unit as far away as possible from electromagnetic equipment (such as
microwave ovens, TVs, video games etc.).
If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be
disrupted by electromagnetic wave radiation.
Do not use this unit near cell phones because doing so may result in noise adversely affecting
the pictures and/or sound.
Recorded data may be damaged, or pictures may be distorted, by strong magnetic fields
created by speakers or large motors.
Electromagnetic wave radiation generated by microprocessors may adversely affect this unit,
disturbing the pictures and/or sound.
If this unit is adversely affected by electromagnetic equipment and stops functioning properly,
turn this unit off and remove the battery or disconnect AC adaptor (DMW-AC8E: optional).
Then reinsert the battery or reconnect AC adaptor and turn this unit on.
Do not use this unit near radio transmitters or high-voltage lines.
If you record near radio transmitters or high-voltage lines, the recorded pictures and/or sound
may be adversely affected.
Always use the supplied cords and cables. If you use optional accessories, use the
cords and the cables supplied with them.
Do not extend the cords or the cables.
Do not spray the camera with insecticides or volatile chemicals.
If the camera is sprayed with such chemicals, the body of the camera may be damaged and the
surface finish may peel off.
Do not keep rubber or plastic products in contact with the camera for a long period of time.
Before cleaning the camera, remove the battery or the DC coupler (DMW-DCC12:
optional), or disconnect the power plug from the outlet. Then wipe the camera with
a dry, soft cloth.
When the camera is soiled badly, it can be cleaned by wiping the dirt off with a wrung wet cloth,
and then with a dry cloth.
Wipe off any dirt or dust on the zoom ring and the focus ring with a dry, dustless cloth.
Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc., to clean the
camera, since it may deteriorate the external case or the coating may peel off.
When using a chemical cloth, be sure to follow the accompanying instructions.
Optimal use of the camera
Cleaning
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 91 ページ 2012年10月25日 木曜日 午後5時25分
92
Others
VQT4M51 (ENG)
About dirt on the image sensor
This camera features an interchangeable lens system so dirt may get inside the camera
body when changing lenses. Depending on the recording conditions, dirt on the image
sensor may appear on the recorded picture.
To prevent debris or dust adhering to internal parts of the body, avoid changing the lens in
a dusty environment and always fit the body cap or a lens when storing the camera.
Remove any dirt on the body cap before attaching it.
Removing dirt on the image sensor
The image sensor is very precise and delicate, so be sure to observe the following when
you do have to clean it yourself.
Blow off the dust on the surface of the image sensor with a commercially available blower
brush. Be careful not to blow too strongly.
Do not put the blower brush further inside than the lens mount.
Do not let the blower brush touch the image sensor as the image sensor may get scratched.
Do not use any objects except a blower brush to clean the image sensor.
If you cannot remove the dirt or dust with the blower, consult the dealer or Panasonic.
For care of the eye cup on the viewfinder
Always remove the battery after use.
Place the removed battery in a plastic bag, and store or keep away from metallic objects (clips,
etc.).
Bring charged spare batteries when going out.
Dust reduction function
This unit has a dust reduction function that will blow off the debris and dust that have
affixed to the front of the imaging device. This function will function automatically when
the camera is turned on, but if you see dust, perform the [Sensor Cleaning] in the
[Setup] menu.
If the eye cup becomes dirty, detach it from
the camera body, gently wipe off the dirt with
a soft, dry cloth, and then reattach it to the
camera body.
Be careful not to lose the eye cup.
Keep the eye cup out of reach of children to
prevent swallowing.
Battery
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 92 ページ 2012年10月25日 木曜日 午後5時25分
93
Others
(ENG) VQT4M51
Specifications
Specifications are subject to change without notice.
Digital Camera Body (DMC-GH3):
Information for your safety
Power Source: DC 8.4 V
Power Consumption: 2.9 W (When recording with Monitor)
[When the Interchangeable lens (H-HS12035) is used]
3.1 W (When recording with Monitor)
[When the Interchangeable lens (H-VS014140) is used]
2.0 W (When playing back with Monitor)
[When the Interchangeable lens (H-HS12035) is used]
2.3 W (When playing back with Monitor)
[When the Interchangeable lens (H-VS014140) is used]
Camera effective
pixels
16,050,000 pixels
Image sensor 4/3q Live MOS sensor, total pixel number 17,200,000 pixels,
Primary colour filter
Digital Zoom Max. 4k
Extra Tele Conversion When taking still pictures:
Max. 2k (When a picture size of [S] (4 M), aspect ratio of [4:3]
is selected.)
When recording motion pictures:
2.4k/3.6k/4.8k
Focus Auto Focus/Manual Focus,
Face Detection/AF Tracking/23-area-focusing/
1-area-focusing/Pinpoint (Touch focus area selection
possible)
Shutter system Focal-plane shutter
Burst recording
Burst speed 20 pictures/second (Super high speed),
6 pictures/second (High speed),
4 pictures/second (Middle speed),
2 pictures/second (Low speed)
Number of
recordable pictures
Max. 18 pictures (when there are RAW files)
Depends on the capacity of the card
(when there are no RAW files)
ISO sensitivity
(Standard Output
Sensitivity)
AUTO/ /125
¢
/200/400/800/1600/3200/6400/12800/25600
¢
(1/3 EV step change possible)
¢ Only available when [Extended ISO] is set.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 93 ページ 2012年10月25日 木曜日 午後5時25分
94
Others
VQT4M51 (ENG)
Minimum Illumination Approx. 6 lx (when i-Low light is used, the shutter speed is
1/25th of a second)
[When the Interchangeable lens (H-HS12035) is used]
Approx. 12 lx (when i-Low light is used, the shutter speed is
1/25th of a second)
[When the Interchangeable lens (H-VS014140) is used]
Shutter speed B (Bulb) (Max. approx. 60 minutes),
60 seconds to 1/4000th
of a second
Taking still pictures during motion picture recording
Motion picture priorities: 1/25th of a second to 1/16000th of a
second
Still picture priorities: B (Bulb) (Max. approx. 60 minutes),
60 seconds to 1/4000th of a second
Metering range EV 0 to EV 18
White Balance Auto White Balance/Daylight/Cloudy/Shade/Incandescent
lights/Flash/White set1/White set2/White set3/White set4/
White Balance K set
Exposure (AE) Programme AE (P)/Aperture-priority AE (A)/Shutter-priority
AE (S)/Manual exposure (M)/AUTO
Exposure Compensation (1/3 EV Step, j5EV to i5EV)
Metering Mode Multiple/Centre weighted/Spot
Monitor 3.0q OLED Monitor (3:2) (Approx. 610,000 dots)
(field of view ratio about 100%)
Touch screen
Viewfinder OLED Live Viewfinder (16:9) (Approx. 1,740,000 dots)
(field of view ratio about 100%)
(with diopter adjustment j4 to i4 diopter)
Flash Built-in pop up flash
GN 17.0 equivalent (ISO200·m)
[GN 12.0 equivalent (ISO100·m)]
Flash range:
Approx. 30 cm (0.98 feet) to 17.1 m (56.0 feet)
[When the Interchangeable lens (H-HS12035) is mounted,
WIDE, [ISO AUTO] is set]
Flash range:
Approx. 50 cm (1.6 feet) to 12.0 m (39.0 feet)
[When the Interchangeable lens (H-VS014140) is mounted,
WIDE, [ISO AUTO] is set]
AUTO, AUTO/Red-Eye Reduction, Forced ON, Forced ON/
Red-Eye Reduction, Slow Sync., Slow Sync./Red-Eye
Reduction, Forced OFF
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 94 ページ 2012年10月25日 木曜日 午後5時25分
95
Others
(ENG) VQT4M51
Flash synchronisation
speed
Equal to or smaller than 1/160th of a second
Microphone Stereo
Speaker Monaural
Recording media SD Memory Card/SDHC Memory Card
¢
/SDXC Memory
Card
¢
(¢ UHS-I-compatible)
Picture size
Still picture When the aspect ratio setting is [X]
4608k3456 pixels, 3264k2448 pixels, 2336k1752 pixels
When the aspect ratio setting is [Y]
4608k3072 pixels, 3264k2176 pixels, 2336k1560 pixels
When the aspect ratio setting is [W]
4608k2592 pixels, 3264k1840 pixels, 1920k1080 pixels
When the aspect ratio setting is [ ]
3456k3456 pixels, 2448k2448 pixels, 1744k1744 pixels
Recording quality
Motion pictures [AVCHD]
1920k1080/50p (28 Mbps)/1920k1080/50i (17 Mbps)/
1920k1080/50i
¢
(24 Mbps)/1920k1080/24p (24 Mbps)
(
¢Sensor output is 25 frames/sec.)
[MP4]
1920k1080/25p (20 Mbps)/1280k720/25p (10 Mbps)/
640k480/25p (4 Mbps)
[MOV]
1920k1080/50p [50 Mbps (IPB)]/
1920k1080/25p [72 Mbps (ALL-Intra)]/
1920k1080/25p [50 Mbps (IPB)]/
1920k1080/24p [72 Mbps (ALL-Intra)]/
1920k1080/24p [50 Mbps (IPB)]/
1280k720/50p [72 Mbps (ALL-Intra)]
When recording motion pictures in slow and fast motion:
1920k1080/24p [24 Mbps (IPB)]
Quality RAW/RAWiFine/RAWiStandard/Fine/Standard/MPOiFine/
MPOiStandard
Recording file format
Still Picture RAW/JPEG (based on “Design rule for Camera File system”,
based on “Exif 2.3” standard, DPOF corresponding)/MPO
Motion pictures AVCHD Progressive/AVCHD/MP4/MOV
Audio compression AVCHD Dolby
R
Digital (2 ch)
MP4 AAC (2 ch)
MOV LPCM (non-compression)
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 95 ページ 2012年10月25日 木曜日 午後5時25分
96
Others
VQT4M51 (ENG)
Interface
Digital “USB 2.0” (High Speed)
¢ Data from the PC can not be written to the camera using the
USB connection cable.
Analogue video/
audio
NTSC/PAL Composite (Switched by menu)
Audio line output (monaural)
Terminal
[REMOTE] φ 2.5 mm jack
[AV OUT/DIGITAL] Dedicated jack (8 pin)
[HDMI] MiniHDMI TypeC
[MIC] φ 3.5 mm jack
Headphone φ 3.5 mm jack
Flash synchro Available
Dimensions Approx. 132.9 mm (W)k93.4 mm (H)k82.0 mm (D)
[5.23q (W)k3.68q(H)k3.23q (D)]
(excluding the projecting parts)
Mass Approx. 550 g/1.21 lb
[with the card and battery]
Approx. 470 g/1.04 lb (camera body)
Approx. 855 g/1.88 lb
[with the Interchangeable lens (H-HS12035), card and battery]
Approx. 1010 g/2.23 lb
[with the Interchangeable lens (H-VS014140), card and battery]
Operating temperature 0 oC to 40 oC (32 oF to 104 oF)
Operating humidity 10%RH to 80%RH
Dust-proof and
splash-proof
Yes
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 96 ページ 2012年10月25日 木曜日 午後5時25分
97
Others
(ENG) VQT4M51
Wireless transmitter
Battery Charger (Panasonic DMW-BTC10E):
Information for your safety
Battery Pack (lithium-ion) (Panasonic DMW-BLF19E):
Information for your safety
Compliance standard IEEE 802.11b/g/n (standard wireless LAN protocol)
Frequency range used
(central frequency)
2412 MHz to 2462 MHz (11ch)
Encryption method Wi-Fi compliant WPA
TM
/WPA2
TM
Access method Infrastructure mode
Input: AC 110 V to 240 V, 50/60 Hz, 0.2 A
Output: DC 8.4 V, 0.65 A
Voltage/capacity: 7.2 V/1860 mAh
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 97 ページ 2012年10月25日 木曜日 午後5時25分
98
Others
VQT4M51 (ENG)
Interchangeable Lens H-HS12035
“LUMIX G X VARIO
1235 mm/F2.8 ASPH./
POWER O.I.S.”
H-VS014140
“LUMIX G VARIO HD
14140 mm/F4.05.8
ASPH./MEGA O.I.S.”
Focal length f=12 mm to 35 mm
(35 mm film camera
equivalent: 24 mm to 70 mm)
f=14 mm to 140 mm
(35 mm film camera
equivalent: 28 mm to
280 mm)
Aperture type 7 diaphragm blades/circular
aperture diaphragm
7 diaphragm blades/circular
aperture diaphragm
Aperture range F2.8 F4.0 (Wide) to F5.8 (Tele)
Minimum aperture
value
F22 F22
Lens construction 14 elements in 9 groups
(4 aspherical lenses/1 UED
Lens/1 UHR Lens)
17 elements in 13 groups
(4 aspherical lenses/2 ED
lenses)
Nano surface coating Yes None
In focus distance 0.25 m (0.82 feet) to (from
the focus distance reference
line)
0.5 m (1.6 feet) to (from the
focus distance reference line)
Maximum image
magnification
0.17k (35 mm film camera
equivalent: 0.34k)
0.2k (35 mm film camera
equivalent: 0.4k)
Optical Image
Stabiliser
Available Available
[O.I.S.] switch Available (Switching ON/
OFF)
Available (Switching ON/
OFF)
Mount “Micro Four Thirds Mount” “Micro Four Thirds Mount”
Angle of view 84x (Wide) to 34x (Tele) 75x (Wide) to 8.8x (Tele)
Filter diameter 58 mm (2.3 inch) 62 mm (2.4 inch)
Max. diameter Approx. 67.6 mm (2.7 inch) Approx. 70 mm (2.8 inch)
Overall length Approx. 73.8 mm (2.9 inch)
(from the tip of the lens to the
base side of the lens mount)
Approx. 84 mm (3.3 inch)
(from the tip of the lens to the
base side of the lens mount)
Mass Approx. 305 g/0.67 lb Approx. 460 g/1.01 lb
Dust-proof and
splash-proof
Yes None
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 98 ページ 2012年10月25日 木曜日 午後5時25分
99
(ENG) VQT4M51
This product incorporates the following software:
(1) the software developed independently by or for Panasonic Corporation,
(2) the software owned by third party and licensed to Panasonic Corporation and/or,
(3) open sourced software including the software developed by the OpenSSL Project for use
in the OpenSSL Toolkit (http://www.openssl.org/
), and the software written by Eric Young
(eay@cryptsoft.com
).
For the software categorised as (1) and (2), please view the information by pressing
[MENU/SET], displaying [Setup] > [Version Disp.], and then pressing [MENU/SET].
For the software categorised as (3), please refer to the applicable license terms in the
following “Operating Instructions for advanced features (PDF format)”.
G MICRO SYSTEM is a lens exchange type digital camera
system of LUMIX based on a Micro Four Thirds System
standard.
Micro Four Thirds™ and Micro Four Thirds Logo marks are
trademarks or registered trademarks of Olympus Imaging
Corporation, in Japan, the United States, the European
Union and other countries.
Four Thirds™ and Four Thirds Logo marks are trademarks
or registered trademarks of Olympus Imaging Corporation,
in Japan, the United States, the European Union and other
countries.
SDXC Logo is a trademark of SD-3C, LLC.
“AVCHD”, “AVCHD Progressive” and the
“AVCHD Progressive” logo are trademarks of Panasonic
Corporation and Sony Corporation.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
HDMI, the HDMI Logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
HDAVI Control™ is a trademark of Panasonic Corporation.
Adobe is a trademark or registered trademark of Adobe
Systems Incorporated in the United States and/or other
countries.
iMovie, Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other
countries.
App Store is a service mark of Apple Inc.
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 99 ページ 2012年10月25日 木曜日 午後5時25分
QuickTime and the QuickTime logo are trademarks or registered
trademarks of Apple Inc., used under license therefrom.
Windows and Windows Vista are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other
countries.
Android and Google Play are trademarks or registered trademarks of
Google Inc.
YouTube is a trademark of Google Inc.
Facebook
®
is a trademark of Facebook, Inc.
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
“Wi-Fi”, “Wi-Fi Protected Setup”, “Wi-Fi Direct”, “WPA” and “WPA2” are marks or registered
marks of the Wi-Fi Alliance.
DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification
marks of the Digital Living Network Alliance.
This product uses “DynaFont” from DynaComware Corporation. DynaFont is a registered
trademark of DynaComware Taiwan Inc.
Other names of systems and products mentioned in these instructions are usually the
registered trademarks or trademarks of the manufacturers who developed the system or
product concerned.
This product is licensed under the AVC patent portfolio license for the personal and non-
commercial use of a consumer to (i) encode video in compliance with the AVC Standard (“AVC
Video”) and/or (ii) decode AVC Video that was encoded by a consumer engaged in a personal
and non-commercial activity and/or was obtained from a video provider licensed to provide
AVC Video. No license is granted or shall be implied for any other use. Additional information
may be obtained from MPEG LA, LLC. See http://www.mpegla.com
.
EU
Panasonic Corporation
Web Site: http://panasonic.net
Panasonic Corporation 2012
DMC-GH3A&GH3H&GH3EB_VQT4M51_eng.book 100 ページ 2012年10月25日 木曜日 午後5時25分
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic DMC-GH3H bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic DMC-GH3H in de taal/talen: Engels als bijlage per email.

De handleiding is 5,83 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Panasonic DMC-GH3H

Panasonic DMC-GH3H Gebruiksaanwijzing - Nederlands - 319 pagina's

Panasonic DMC-GH3H Gebruiksaanwijzing - Nederlands - 96 pagina's

Panasonic DMC-GH3H Gebruiksaanwijzing - Deutsch - 319 pagina's

Panasonic DMC-GH3H Gebruiksaanwijzing - Deutsch - 96 pagina's

Panasonic DMC-GH3H Gebruiksaanwijzing - English - 319 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info