Radio Basics
8
3
E
N
G
L
I
S
H
CQ-RD152/RD142/RD132N
r Mono/Local Selection (MONO/LOC)
MONO : Noise is significantly decreased when weak signals are
received from an FM broadcast station.
LOCAL : Only strong signals of stations are searched for in seek
tuning, while at the LOCAL OFF setting, relatively weak
signals are also searched for.
e Manual Tuning
[}TUNE] : Higher frequency
[{TUNE] : Lower frequency
Seek Tuning
Press and hold for more than 0.5
seconds then release.
[}TUNE] : Higher frequency
[{TUNE] : Lower frequency
Tuning will automatically stop when
the signals of the next broadcast
station are received.
FM1
FM2
FM3
AM (LW/MW)
w Band
Press [BAND] to change the
bands.
FM stereo indicator
Band
q Mode Selection
You can switch to the radio mode as shown below.
From: Eject a tape.
Press [BAND].
FM broadcasts
Press and hold [PTY] (MONO/
LOC) to change the mode.
Release when at the desired point.
MONO OFF / LOCAL OFF
LOCAL OFF
MONO ON / LOCAL OFF
MONO ON / LOCAL ON
MONO OFF / LOCAL ON
LOCAL ON
AM broadcast
Press and hold [PTY] (MONO/LOC)
to switch LOCAL mode on and off.