Caution
¡Check the connectors provided on your car (see pre-
caution below) before connecting the system.
¡To prevent damage to the unit, be sure to follow the
connection diagram.
¡Strip about 5 mm of the lead ends for connection
(only non-ISO connector cords).
¡Do not insert the power connector into the unit until
the wiring is completed.
Precautions (ISO Connector)
¡The pin arrangement of the power connector con-
forms to ISO standard.
¡The pin arrangement of ISO connectors in some cars
may differ from the ISO standard.
¡Please check that the pin arrangement of the connec-
tor in your car conforms to ISO standard.
¡For car types A and B, change the wiring of the red
and yellow leads as shown at below.
¡After connection, insulate the portions marked (C)
with insulating tape.
Note:
¡For cars other than types A and B, please consult
your local car shop.
A7: IGN or ACC switched 12 V supply
(Red)
(Yellow)
(Yellow)
(Red)
(Red)
(Yellow)
(Yellow)
(Red)
(Red)
(Yellow)
(Red)
(Yellow)
A4: IGN or ACC switched 12 V supply
A4: +12 V Battery (Permanent supply)
A7: +12 V Battery (Permanent supply)
A7: +12 V Battery (Permanent supply)
A4: No connection
A7
A4
Basic Connection
Antenna
Power Connector
ISO Antenna
Adapter
e
(If needed)
*Fuse (15 A) Refer fuse replacement
to your nearest authorized Panasonic
Service Centre. Do not try fuse replace-
ment by yourself.
CQ-D1703N
DVD Player/Receiver
VIDEO-OUT
(Yellow)
