597960
15
Verklein
Vergroot
Pagina terug
1/116
Pagina verder
15
2
OUTPUT SEL (output signal selection) switch
Used to switch the signals output from the VIDEO OUT and
MON OUT connectors.
MEM: In EE (recording) mode, video from the camera is
output. In VV (playback) mode, playback signal
from a P2 card is output.
CAM: Video from the camera is output constantly.
OFF: Video is not output, and the video camera-
recorder operates in power-saving mode.
Note that the audio output is synchronised with the video.
For types of video outputs, see [4-9-2 Selecting Video
Output Signals].
REW (rewind) button and lamp
During pause, this button performs a fast-reverse playback
with the lamp blinking.
During playback, it performs an approximately 4C fast-
reverse playback with the PLAY and REW lamps blinking.
If this button is pressed when playback is paused, the start
of the clip being played back is located in pause mode.
FF (fast forward) button and lamp
During pause, this button is used to perform fast playback
with the lamp blinking.
During playback, it performs an approximately 4C fast
playback with the PLAY and FF lamps blinking.
If this button is pressed when playback is paused, the start
of the next clip is located in pause mode.
STOP button
This button stops playback.
PLAY/PAUSE button
This button is used to view playback using the viewfinder
screen or a color video monitor. The lamp comes on when
playback starts.
In playback mode, this button pauses (PLAY PAUSE)
playback with the lamp blinking.
REC button
Pressing this button starts recording, and pressing again
stops recording.
This button has the same function as the REC START/
STOP button and the VTR button at the lens.
It may be disabled with the recording protection button.
REC protection button
This button disables the REC button on the handle.
ON: The REC button is enabled.
OFF: The REC button is disabled.
P2 CARD STATUS LED
This LED indicates the recording and playback status of
each card.
Slide lock button
Used to open the slide-out door for inserting P2 cards. While
depressing this button, slide the door to the left.
USB 2.0 connector
A USB 2.0 cable is connected here. (To be supported in the
near future.)
GENLOCK IN connector
This connector is used to input a reference signal when the
camera unit is gen-locked, or when the time code is
externally locked. If VIDEO is selected for the menu option
REC SIGNAL, the connector can be used to record actual
signals. The menu option REC SIGNAL is found on the
SYSTEM MODE screen on the SYSTEM SETTINGS page.
<Notes>
z The reference input signal must be a standard VBS
(Video Burst Sync).
z If you need to synchronise the input signal with the AJ-
SPX800P when “VIDEO” is selected for the REC SIGNAL,
set the menu option GENLOCK to “EXT”. The option
GENLOCK is found on the GENLOCK screen, which is
accessible from the SYSTEM SETTING page.
MON OUT (monitor output) connector
This connector outputs the video signal to the monitor. The
video signals linked to the setting of the OUTPUT SEL
switch are output from here. Through an internal menu
option, the characters can be superimposed independently
of the VIDEO OUT connector. For more information, see [4-
9-2 Selecting Video Output Signals].
Connector cover
This cover must be removed in order to attach the optional
connector 1394. For directions on attaching the connector,
see the instruction manual for the optional connector 1394.
(To be supported in the near future.)
ECU REMOTE (remote control) connector
The extension control unit AJ-EC3P (optional accessory) is
connected here.
VIDEO OUT (video signal output) connector
This connector outputs video signals. The video signals
linked to the setting of the OUTPUT SEL switch are output
from here.
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic AJ-SPX 800P bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic AJ-SPX 800P in de taal/talen: Engels als bijlage per email.

De handleiding is 3,23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info