7
Chapter 7 Menu description tables
89
Item/
Data storage
Variable
range
Remarks
DETAIL ON
OFF
For selecting ON or OFF for DTL (H, V).
2D LPF ON
OFF
For selecting ON or OFF for the 2-
dimensional LPF that reduces cross color.
HIGH COLOR ON
OFF
For selecting ON or OFF for the mode in
which the dynamic range of the colors is
expanded.
TEST SAW ON
OFF
For selecting ON or OFF for the test signals.
FLARE ON
OFF
For selecting ON or OFF for the flare
compensation.
H-F COMPE. ON
OFF
For selecting ON or OFF for the mode in
which the wide-band DTL is increased.
7-3-12 CAMERA SETTINGS
ECU MENU DISP. ON
OFF
For selecting ON or OFF for displaying the
MENU on the viewfinder when the ECU is
connected.
50M INDICATOR
SDC905
ON
OFF
For selecting ON or OFF for the displays
during 50M recording.
7-4 VF
7-4-1 VF DISPLAYS
Item/
Data storage
Variable
range
Remarks
DISP CONDITION NORMAL
HOLD
NORMAL: The statuses are displayed at all
times.
HOLD: The statuses are displayed only
when the MODE CHECK switch is
pressed.
DISP MODE 1
2
3
For performing the DISP MODE setting. This
item is used to select the camera’s warning or
message displays. For details, refer to “4-7-4
Display modes and setting changes/
adjustment result messages.”
VF OUT Y
NAM
R
G
B
For selecting the VF output.
Y: Luminance signal
NAM: The signal with the highest level among
the R, G and B signals is output.
R: R channel signal
G: G channel signal
B: B channel signal
VF DTL 0
:
3
:
5
For performing the VF DTL selection. This
item is used to further emphasize the DTL of
the VF signals. If 0 is set, the DTL will be the
same as that of the main line signals.
ZEBRA1 DETECT 0%
:
70%
:
109%
For setting the ZEBRA1 detection level (IRE
level).
ZEBRA2 DETECT 0%
:
85%
:
109%
For setting the ZEBRA2 detection level (IRE
level).
ZEBRA2 ON
SPOT
OFF
For selecting ON or OFF for ZEBRA2 or
selecting SPOT.
LOW LIGHT LVL OFF
10%
15%
20%
25%
30%
35%
For setting how much lower the camera’s
input light quantity should be in order for
“LOW LIGHT” to be displayed.
MARKER/
CHAR LVL
50%
60%
70%
80%
90%
100%
For setting the brightness of the markers and
characters displayed in the viewfinder.
Zebra pattern display
Video level
