99987
39
Verklein
Vergroot
Pagina terug
1/134
Pagina verder
39
4
Chapter 4 Adjustments and settings for recording
(continued)
CAMERA
MODE
User bits
User bit memory function
The user bit settings (except for the actual time) are
automatically saved in the memory and retained even after
the power is turned off.
Tape continuity with the user bits
(Only when the recording format is 1080-50i or 1080-59.94i)
Selecting REGEN for the UB MODE item on the <TC/UB>
screen by performing menu operations will call up the user
bits recorded on the tape, making it possible to continue
recording from that value. However, it is not possible to
record the contents that were set.
Camera shooting information
In the unit, the frame rate information (camera shooting
mode) indicating the shooting rate and the active frame
information (update frame information) indicating the first
frame of which frame images are switched are automatically
stored as the cameras shooting information into the user bits
of LTC (when the recording format is 720-50P or 720-
59.94P) or the user bits of VITC (when the recording format
is 1080-59.94i and the video method is 24P or 24PA).
These kinds of information will be output from the TC OUT
connector rather than recorded on tape. It will also be
overlaid with the HD SDI signals output from the MON OUT
connector and VIDEO OUT connector.
The active frame information (update frame information) is
stored in the lowest digit of the user bits, while the frame rate
information (camera shooting mode) is stored in the lower
3rd and 4th digits. To store the camera shooting information
into the user bits of LTC and the user bits of VITC in other
shooting modes, open the <TC/UB> screen from the VTR
MENU page by performing menu operations and select
FRM RATE in the UB MODE item and the VITC UB MODE
item.
5
O To record the user bits of LTC, open the <TC/UB>
screen from the VTR MENU page by performing
menu operations and select USER in the UB MODE
item.
(When the recording format is 720-50P or 720-
59.94P, set the OUTPUT/AUTO KNEE switch to the
BARS position in order to record the user bits of
LTC in a mode for recording built-in color bar signals.)
O To record the user bits of VITC, select USER/EXT in
the VITC UB MODE item.
<Notes>
O The time code/user bits are also recorded in the VIDEO
AUX area of the units memory.
The time code (VITC) is the same value as the sub code
areas time code (LTC). The user bits (VITC user bits)
can be selected by menu operations using the VITC UB
MODE item on the <TC/UB> screen which is accessed
from the VTR MENU page, and it can be used for different
applications from the LTC.
O The number of digits that can record user bits may vary
with the recording format.
O When the recording format is 720-50P or 720-59.94P,
operations where FRM RATE or REGEN is selected in the
UB MODE item will be the same when USER is selected.
Furthermore, operations where TIME is selected in the
VITC UB MODE item will be the same when FRM RATE
or REGEN is selected.
O When only the upper 6 digits of the user bits can be
recorded, the remaining lower 2 digits are not recorded. In
this case, the user setting value and the lower 2 digits of
the time code generator that are selected in the UB
MODE item and VITC UB MODE item cannot be
recorded.
24P
24PA
LTC UB
All 8 digits can be recorded
(In accordance with the settings in the UB
MODE item)
VITC UB
Camera shooting information is recorded
automatically.
60i
50i
30P
25P
LTC UB
All 8 digits can be recorded
(In accordance with the settings in the UB
MODE item)
VITC UB
All 8 digits can be recorded
(In accordance with the settings in the
VITC UB MODE item)
When the recording format is 1080-50i or 1080-59.94i
OUTPUT/AUTO
KNEE switch
CAMERA MODE:
60P/50P/30P/25P/24P
BARS
(Built-in color
bar signals)
LTC UB
Upper 6 digits can be recorded.
(In accordance with the settings in the UB
MODE item)
VITC UB
Upper 6 digits can be recorded.
(In accordance with the settings in the
VITC UB MODE item)
CAM
(Camera video
image signals)
LTC UB
User bits information is recorded
automatically.
VITC UB
Upper 6 digits can be recorded.
(In accordance with the settings in the
VITC UB MODE item)
When the recording format is 720-50P or 720-59.94P
01.AJ-HDX900_P_E(VQT0X86)_E 06.6.22 12:52 PM ページ39
39

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic AJ-HDX900 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic AJ-HDX900 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info