99987
26
Verklein
Vergroot
Pagina terug
1/134
Pagina verder
26
<Notes>
If the PRE REC MODE items is set to OFF, recording
starts about 0.4 seconds after pressing the REC START
button when the VTR SAVE/STBY switch is set to either
SAVE or STBY position.
If the PRE REC MODE item is set to ON, video signals
for the time set in the PRE REC TIME item before starting
are recorded.
The data contained in the storage memory becomes
unstable immediately after the power is turned on,
immediately after the PRE REC MODE item setting is
selected or its set time has been changed, and
immediately after playback or rec-review has been
performed. Immediately after any of these operations,
therefore, the video and audio signals will not be pre-
recorded for the duration set when recording is started by
pressing the REC START button or VTR button on the
lens.
The video data and audio data are not stored in the
storage memory while playback or rec-review is being
performed. This means that the pre-recording will not
include the video and audio signals supplied during a
playback or rec-review operation.
When recording has been started, the time code (TCG)
display may remain in the hold status until it is possible for
the time code (TCR) on the tape to be read.
3-4 To record video signals of a few
seconds before starting recording
(PRE-RECORDING function)
By always storing a few seconds worth (maximum of 7
seconds) of audio and video data shot by the camera, it is
possible to record video and audio signals a few seconds
before recording is actually started by pressing the REC
START button or the VTR button on the lens in the built-in
memory.
In order for this function to be used, it is necessary to open
the <REC FUNCTION> screen from the SYSTEM SETTING
page and set the data storage time in memory using the PRE
REC MODE item and the PRE REC TIME item using the
menu operation.
PRE REC MODE
ON: PRE RECORDING function is activated.
OFF: Recording starts about 0.4 seconds after pressing
the REC START button or the VTR button on the
lens.
If you stop recording by pressing the REC START
button or the VTR button on the lens, the message
TAPE ¢S will be displayed on the viewfinder
screen.
PRE REC TIME
From 0 to 7 seconds:
A value from 0 to 7 seconds is set as the length of time
for which the video and audio signals can be recorded
before the REC START button or the VTR button on
the lens is pressed.
Chapter 3 Recording and playback
(continued)
A
A
B
B
C
Real-time video signals
Real-time audio signals
What is recorded on the
tape
Previous cut
PRE-REC time set
REC start
(recording start)
REC pause
Recorded section D
Pause for
replaying
Pause for
recording
Rec-review
For details, refer to 3-7 To
check the last few seconds of the
recording (Rec-review function).
Stopped
O Time code regeneration
O Time code regeneration
O Rewound for 2 seconds
and then played back
Pause for
replaying
Pause for
recording
Stopped
No recorded section is available.
O Rewinding for 5 seconds
No recorded section is available.
O Rewinding for 5 seconds
No recorded section is available.
O Rewinding for 5 seconds
If the recorded section is found
O Rewound to the recorded part
O Time code regeneration
O Rewound for 2 seconds and then
played back
Section not recorded (B, C)
Transitions with the jump operation
01.AJ-HDX900_P_E(VQT0X86)_E 06.6.22 12:52 PM ページ26
26

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic AJ-HDX900 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic AJ-HDX900 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info