597941
122
Verklein
Vergroot
Pagina terug
1/138
Pagina verder
122
Displays
Something is wrong with
the time code display.
The time code display may not register a regular count if a tape is
played in the reverse slow mode. This is normal.
The remaining tape display
differs from the actual
amount of tape remaining.
The remaining tape is not displayed accurately if you shoot
continuously for periods of less than 30 seconds.
The display may show 2 to 3 minutes less than the actual time
remaining on the tape.
Playback
Cannot play even when I
press the play button.
Make sure the MCR/VCR lamp is on (press the mode button).
No kind of playback operation can be performed unless this lamp is
on.
P 63, 64
Cannot play back P2 cards
or tapes.
Make sure the MEDIA switch is in the correct position.
If not, set it to the P2 or TAPE position.
P 63, 64
Mosaic-like noise appears
when I cue or review a tape.
This noise is inherent to digital video technology. This is normal.
Images do not appear on
the television even though
I have connected the
camera-recorder properly.
Make sure the input selector on your television is set to video input.
Read the television’s instructions carefully and select the correct
video input connector for the camera-recorder.
When a component video cable is connected, video signals are not
output from the VIDEO OUT and S-VIDEO OUT connectors.
P 80
The playback images are
not displayed clearly.
The camera-recorder’s heads may be dirty.
Images will not be displayed clearly if the heads are dirty.
Cannot hear any sound
from the camera-recorder’s
speaker.
You may have turned down the camera-recorder’s volume control
too far.
Adjust the volume level using the AUDIO MON/ VAR button+.
P 76
I can hear two sets of
sound.
You may have selected “MIX” as the 32K(12bit) AUDIO setting in
the PLAYBACK FUNCTION screen.
P 110
If you perform audio dubbing on a tape that was recorded with 32K
(12bit) selected as the AUDIO REC setting in the RECORDING
SETUP screen, you will hear the sound heard during recording
and that of the audio dubbing. You can also listen to each sound
separately.
P 107
When I performed audio
dubbing, the original sound
was erased.
If you perform audio dubbing on a tape that was recorded with 48K
(16bit) selected as the AUDIO REC setting in the RECORDING
SETUP screen, you will hear the sound heard during recording and
that of the audio dubbing. To leave the original sound intact, make
sure that 32K (12bit) is selected when you shoot.
P 107
Cannot perform hot swap
playback.
This unit does not support hot swap playback.
To replace one card with another during dubbing, stop the dubbing
first, and upon completing the replacement, resume it.
P 88
Before calling for service (continued)
122

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic AG-HVX 200AP bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic AG-HVX 200AP in de taal/talen: Engels als bijlage per email.

De handleiding is 16,62 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info