597937
153
Verklein
Vergroot
Pagina terug
1/166
Pagina verder
153
Chapter 9 Maintenance and Inspections
Warning and Error Display for Thumbnail Operation and USB HOST MODE
Item Message Description Measure
Thumbnails
CANNOT ACCESS!
Data cannot be accessed because it is
corrupted or for other reasons.
Restore media and clips to normal state
before access.
CANNOT CHANGE!
Any thumbnails that cannot be produced
on the AVC-Intra 100 or AVC-Intra 50 and
displayed in gray cannot be changed at the
text memo position.
Set SYSTEM MODE according to the clips.
CANNOT COPY! Images cannot be copied. Check the conditions for copying.
CANNOT DELETE !
P2 card contains contents version
mismatches or bad clips.
Match devices and contents versions, and
repair bad clips.
CANNOT FORMAT! P2 card problem prevents formatting. Check P2 card.
CANNOT
RECONNECT!
A clip that does not span multiple P2 cards
cannot be reconnected.
Check selected content.
CANNOT REPAIR!
Data cannot be repaired since content that
cannot be repaired is selected.
Check selected content.
CANNOT REPAIR IN
SELECTION!
Some of the selected clip could not be
repaired.
CARD FULL! The P2 or SD card is full. Insert media with sufficient capacity.
INVALID VALUE! Entered data was invalid. Enter data in a valid range.
LACK OF REC
CAPACITY!
There is not enough recording capacity left
on the card.
Insert a card with sufficient recording
capacity.
MISSING CLIP!
A shot mark will be added to the clips
recorded on multiple P2 cards when all P2
cards are not inserted yet.
Insert all P2 cards with recorded clips,
and confirm that the
!
incomplete clip
indicators disappear, and then add shot
marks.
NO CARD! No P2 or SD card is inserted. Insert compatible media.
NO COPY TO SAME
CARD!
A clip cannot be copied to the card storing
the original clip.
Copy the selected clip to a card that does
not contain the original clip.
NO FILE! The designated file is not found. Check the file.
NO SD CARD! No SD card is inserted. Insert an SD card.
SAME CLIP IS
SELECTED!
The clip cannot be copied because a clip
that has already been copied and the original
clip have been selected.
Confirm the selected clip and release
either the source clip or the destination
clip and then execute the copy operation.
TOO MANY CLIPS! Too many clips are selected. Reduce the number of selected clips.
UNKNOWN
CONTENTS FORMAT!
P2 card contains contents version
mismatches or corrupted content.
Match devices and contents versions, and
repair bad clips.
UNKNOWN DATA! The metadata character code is invalid.
Use UTF-8 for the metadata character
code. Use the viewer to enter correct
characters.
USER CLIP NAME
MODIFIED!
Characters in the clip name had to be
deleted in adding the counter value.
The user clip name plus the counter
value can only contain up to 100
bytes. Characters in the clip name are
automatically deleted when the total
exceeds 100bytes.
WRITE PROTECTED! The P2 or SD card is write protected. Insert write-enabled media.
Soft
keyboard
CANNOT CHANGE!
[PERSON] will be entered while the text
memo is not available.
Enter [TEXT] before entering [PERSON].
CANNOT SET! INVALID
VALUE!
The entered value is incorrect. Change the value.
(Continued on the next page)
153

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic AG-HPX 300P bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic AG-HPX 300P in de taal/talen: Engels als bijlage per email.

De handleiding is 12,69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info