597937
145
Verklein
Vergroot
Pagina terug
1/166
Pagina verder
145
Chapter 8 Connecting to External Devices
Connections to the DVCPRO/DV Connector
Recording signals input to the
DVCPRO/DV connector
1
Connect a 1394 cable (DV cable).
For details, see [Precautions in 1394 Connections]
(page 146).
Make sure that the signal format of the camera
and the connected device is the same.
2
To route inputs via the IEEE 1394 interface, set
the menu option REC SIGNAL in the SYSTEM
SETUP screen to 1394.
To use HD (1080i, 720P) set the menu option
REC FORMAT in the SYSTEM SETUP screen to
DVCPRO HD/60i or DVCPRO HD/60P.
The AVC-Intra format and DVCPRO HD native
recording do not allow input via the IEEE 1394
interface.
NOTE
Signals that have the same format as that set in the menu
options SYSTEM MODE and REC FORMAT in the SYSTEM
SETUP screen should be input to the IEEE 1394 interface. A
signal in a different format will not be correctly recorded on
a P2 card. Video and audio recording and EE type video and
audio of signal inputs other than 1x speed playback signals
may not work.
For details, see [Warning and Error Display for Thumbnail
Operation and USB HOST MODE] (page 153).
Audio signal inputs are input signals from the DVCPRO/DV
connector.
32 kHz/4CH (12 bit) audio signals input via the IEEE1394
interface are recorded as 48 kHz/4CH (16 bit) on a P2 card.
It is not possible to use the GENLOCK IN connector to
synchronize to an external reference signal.
Signals output from the VIDEO OUT or AUDIO OUT
connectors differ from actual input signals. Use such signals
for monitoring.
The following functions do not operate.
Pre-recording function
Loop recording function
Interval recording and one-shot recording function
Time Code and User Bits
When input from the IEEE1394 interface is selected,
the time code or user bits input to the TC IN connector
cannot be recorded on a P2 card.
When input from the IEEE1394 interface is selected,
time code output from the TC OUT connector is not
synchronized to the video signal output from the VIDEO
OUT connector.
Subcode area time codes and user bits
When input from the IEEE 1394 interface is selected and
the TCG switch is set to F-RUN, the time code of the
subcode area input from the DVCPRO/DV connector can
be recorded on the P2 card.
To record user bits input from the DVCPRO/DV connector
on a P2 card, set the menu option UB MODE in
RECORDING SETUP to EXT.
VAUX area time codes and user bits
When input from the IEEE1394 interface is selected,
time code and user bits of the VAUX area input from
the DVCPRO/DV connector is recorded on a P2 card
regardless of camera menu settings and switch positions.
Recording UMID (Unique Material
Identifier) data
When input from the IEEE1394 interface is selected, UMID
data input via the DVCPRO/DV connector is recorded on
a P2 card. When no UMID data is available, the camera
generates and records such data.
UMID data is not recorded when the camera is operating in
the DV mode.
145

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic AG-HPX 300P bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic AG-HPX 300P in de taal/talen: Engels als bijlage per email.

De handleiding is 12,69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info