1
Connect the AC Mains Lead to the AC Adaptor
and the AC mains socket.
2
Connect the DC Input Lead to the [DC IN]
Socket U on the Camera Recorder.
3
Connect the DC Input Lead to the AC Adaptor.
OBefore connecting or disconnecting the power
supply, set the [OFF/ON] Switch on the Camera
Recorder to [OFF] and make sure that
[CAMERA/VCR] Lamps is not lit.
$ Using the Battery
Before use, fully charge the Battery.
OFor other notes concerning this item, see -42-.
1
Attach the Battery to the AC Adaptor and
charge it.
OSince the Battery will not be charged when the
DC Input Lead is connected to the AC Adaptor,
disconnect it from the AC Adaptor.
OThe [CHARGE] Lamp lights up, and charging
starts.
OWhen the [CHARGE] Lamp goes off, charging is
completed.
2
Attach the charged Battery to the Camera
Recorder.
Disconnecting the Power Source
Set the [OFF/ON] Switch b to [OFF] and, disconnect
the DC Input Lead or remove the Battery.
OWhile pressing the [PUSH] Button S with your
index, remove the battery by pushing it up with your
thumb.
O Do not bring metal objects (such as
necklaces or hairpins) into contact with the
battery terminals. The terminals may short
circuit and generate heat, and touching them
in this condition may cause severe burns.
O The battery heats up during operation and during
charging, as does the camera recorder body.
O If recording and stop operations are repeated
more than is necessary, the recording time will
be less than the values given in the above table.
O Store the battery only when it is fully discharged.
It is recommended that the battery be charged
once a year when it is being stored long-term
and that it be placed back in storage after it has
been fully discharged using the camera recorder.
O When the temperature of the battery unit has
risen to an extremely high level or dropped to an
extremely low level or when the battery is not
used for prolonged periods of time has become
fully discharged, the “CHARGE” lamp flashes
several times, and charging commences
automatically.
O If the “CHARGE” lamp continues to flash even
though the battery temperature is normal, consult
your dealer as a problem may have developed
within the battery or AC adapter.
O When the battery is warm, it takes longer than
usual for the battery to be charged.
O When the AC adapter is used near a radio, the
radio sound may be distorted. Use the adapter
at a distance of at least one meter from the radio.
O Noise may be heard while the AC adapter is in
use; however, this is normal and not indicative of
any malfunctioning.
O The battery cannot be charged while supplying
power from the AC adapter to the camera
recorder.
CAUTION:
This unit will operate on 110/120/220/240V AC.
An AC plug adapter may be required for voltages
other than 120V/AC.
If a conversion plug is required, consult with your
dealer as to which one is to be purchased.
