Checking the system operations (cont.)
Turning on the power
3
Press the part marked “PUSH” and close the
cassette holder.
When the holder is closed properly, the
cassette holder is retracted automatically.
4
Close the cassette cover after the cassette
holder has been completely retracted.
O Do not take hold of the cassette cover alone
to insert or remove tapes.
Insert and remove cassette tapes after
putting the camera-recorder down on a
stable, flat surface or hold it with both hands
to keep it stable.
O Do not forcibly push the cassette holder into
place as this may cause malfunctioning.
O Wait until the cassette holder is completely
retracted before closing the cassette cover.
Hold down the white button and turn the
POWER lever to the ON position.
The CAMERA (red) lamp lights, and the
camera-recorder switches to shooting pause
mode.
POWER lever
Inserting the cassette tape
1
Slide the OPEN/EJECT lever in the direction
of the arrow, and open the cassette cover.
When the cover is fully opened, the cassette
holder pops out automatically.
2
Insert the cassette tape.
