597929
15
Verklein
Vergroot
Pagina terug
1/42
Pagina verder
Before using
15
Setting date and time
If the screen shows the incorrect date/time, then adjust it.
Set to Tape Recording Mode.
1 Set [BASIC] >> [CLOCK SET] >> [YES].
2 Press the [2] or [1] button in order to select the item to
be set. Then press the [3] or [4] button to set the
desired value.
The year will change as follows:
2000, 2001, ..., 2089, 2000, ...
The 24-hour clock is used.
3 Press the [ENTER] button to determine the setting.
The clock function starts at [00] seconds.
ª
About date/time
The date and time function are driven by a built-in lithium
battery.
Make sure to check the time before recording because the
built-in clock is not very accurate.
ª
Recharging the built-in lithium battery
If [0] or [--] is indicated when the camera is turned on, then
the built-in lithium battery runs down. Connect the AC adapter
to the camera or place the battery on the camera, and the
built-in lithium battery will be recharged. Leave the camera as
is for approx. 24 hours, and the battery will drive the date and
time for approx. 6 months. (Even if the [OFF/ON] switch is set
to [OFF], the battery is still being recharged.)
Adjusting LCD monitor/viewfinder
ª Adjusting the brightness and color level
1 Set [SETUP] >> [LCD SET] or [EVF SET] >> [YES].
2 Press the [3] or [4] button in order to select the item to
be adjusted.
[LCD SET]
: Brightness of the LCD monitor
: Color level of the LCD monitor
[EVF SET]
: Brightness of the viewfinder
3 Press the [2] or [1] button to move the bar indication
representing the brightness.
4 Press the [MENU] or [ENTER] button to complete the
settings.
In order to adjust the brightness of the viewfinder, close the
LCD monitor, and the viewfinder will be activated.
When the LCD monitor is rotated by 180° towards the lens,
the brightness of the LCD monitor cannot be adjusted.
These settings will not affect the images actually recorded.
ª
In order to increase the brightness of the entire
LCD monitor
1
Press the [POWER LCD] button.
The [POWER LCD] lamp lights up.
If the [POWER LCD] button is pressed, the entire LCD
monitor will become approx. twice as bright as the normal.
Press this button again, and the lamp will go off and the
brightness will revert back to the original brightness.
This will not affect the images to be recorded.
If you turn on the camera when the AC adapter is used, the
[POWER LCD] function will not be activated.
EVF
POWER
LCD
DVC20_Eng.book 15 ページ 2006年4月6日 木曜日 午前10時10分
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic AG-DVC 20p bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic AG-DVC 20p in de taal/talen: Engels als bijlage per email.

De handleiding is 3,95 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info