~ 65 ~
6. Press the button « START / PAUSE » to start the selected drying programme.
The display indicates the remaining duration of the drying process in hours and
minutes; based on the selected programme, the maximum load allowed and the
required drying level.
7. When the drying programme is finished, an acoustic signal sounds, if the signal
has been switched on; s. chapter 4.5 END OF A DRYING PROGRAMME and see also
chapter 4.4.2 THE ADDITIONAL DRYING FUNCTIONS / FUNCTION: « SIGNAL ».
8. When the drying programme is finished, turn the rotary knob for the programme
selection back to « OFF » to switch off the appliance completely.
It is possible that the current run time of the selected drying programme
(depending on the drying situation) will be adjusted automatically so that it may
vary from the drying time which is indicated on the display.
If the set drying programme cannot be combined with the set drying function(s),
the error code « ErS (error) » is indicated on the display. Cancel the selected
function and / or select another one.
4.4.1 Drying programmes « TIME 30' / 60' / 90' »
❖ If you set one of the drying programmes « TIME 30' / 60' / 90' », you can select
a drying time of 30, 60 or 90 minutes.
❖ Due to the selectable drying time, this programme is very suitable for drying thick
or multi-layered textiles, e.g. terry towels, or for drying individual pieces of
laundry or smaller quantities of laundry.
The drying programme « TIME 30' » is suitable for synthetic fabrics.
The drying programmes « TIME 60' » and « TIME 90' » are suitable for cotton
fabrics.
Thick or multi-layered textiles, e.g. bed linen, jeans, jackets, etc. are not easy to
dry. If they are not completely dry at the end of a drying programme, we
recommend using one of these programmes (30, 60 or 90 minutes) afterwards to
dry the laundry completely by setting an individual drying time.
