523541
47
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
Cerberus Wi-Fi Lite (P6381-0)
47
Remote Secure Gateway Enter the IP address of the remote VPN gateway with which the
Wireless-G Router sets up a VPN connection.
Remote IP Address/ Network – Enter the destination IP address of the remote host/network.
For example, 192.168.1.10.
Remote Subnet Mask Enter the subnet mask for the remote host/network. For example,
255.255.255.0.
Local/Peer ID Configure the fields below to set the ID type and content to identify the local
and remote VPN endpoints.
Local ID Type Select the ID type the Wireless-G Router uses. Choices are IP, DNS or
Email.
Local ID – Specify the ID to identify the Wireless-G Router.
If you select IP in the Local ID Type field, the Wireless-G Router uses the IP address
you specify in the Local IP Address/Network as the local ID.
If you select DNS in the Local ID Type field, enter a domain name.
If you select Email in the Local ID Type field, enter an email address.
Remote ID Type – Select the ID type the remote VPN endpoint uses. Choices are IP, DNS or
Email.
Remote ID – Specify the ID to identify the remote VPN gateway.
If you select IP in the Remote ID Type field, the Wireless-G Router uses the IP address
you specify in the Remote IP Address/Network as the peer ID.
If you select DNS in the Remote ID Type field, enter a domain name.
If you select Email in the Remote ID Type field, enter an email address.
Key Management
IKE – Select this option to set the Wireless-G Router to automatically generate the encryption
keys for the VPN tunnel. Clear this option to manually set the authentication and encryption
keys.
Advanced This button is applicable when you select IKE. Click Advanced to configure IKE
authentication and encryption settings.
Connection Type Select Initiator to set the Wireless-G Router is to initiate a VPN
connection to the remote VPN gateway. Select Responder to set the Wireless-G Router to
allow VPN connection from a remote location.
Connect This button is applicable when you select Responder in the Connection Type
field. Click Connect to establish a VPN connection to the remote location.
Disconnect This button is applicable when you select Initiator in the Connection Type
field and the connection is up. Click Disconnect to terminate the VPN connection.
ESP – Set the fields below to configure ESP (Encapsulating Security Payload) settings.
(Encryption Algorithm) Specify the encryption algorithm for this VPN rule. Choices are
3DES and AES128 (faster). Select NULL to set up phase 2 tunnel (for key exchange) without
encryption.
(Authentication Algorithm) – Specify the encryption algorithm for this VPN rule. Choices are
MD5 and SHA1 (more secure).
PreShared Key This field displays when you select IKE. Enter the pre-shared key for IKE
authentication. The key length varies depending on the authentication algorithm.
For MD5, enter 16 characters for the key.
For SHA1, enter 20 characters for the key.
Remote RSA Key This field displays when you select IKE. Enter the public RSA key of the
remote VPN gateway to authenticate with a certificate.
Status This field displays whether this VPN tunnel is up (Connected) or not
(Disconnected).
Apply Changes Click Apply Changes to save the changes. The Wireless-G Router will
reboot to make the changes take effect.
Reset – Click Reset to clear the settings in the fields.
Refresh – Click Refresh to update this screen.
47

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw PENTAGRAM Cerberus Wi-Fi Lite P 6381-0 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van PENTAGRAM Cerberus Wi-Fi Lite P 6381-0 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info