PENTAGRAM Cerberus [P 6367]
WPS Settings
WPS (Wi-Fi Protected Setting) is an easy and quick way to establish the encrypted connection
between the wireless network clients and the device. Users only need to enter PIN code or
press WPS button on the side panel to configure it. In the WLAN Settings menu, click WPS
settings to enter the configuration interface.
WPS Settings: To enable or disable WPS function.
WPS mode: Provide two simple WPS ways: PBC (Push-Button Configuration) and PIN code.
• PBC: Select the PBC and click Save or press the WPS/RESET button on the side panel of the
device for about one second, at the same time enable client’s WPS/PBC to establish
connection.
Operation process: Press the button for about one second and WPS indicator will be flashing
for 2 minutes, which means the WPS is enabled. During the flashing time, you can enable
the WPS/PBC of the wireless client for them to negotiate. Two minutes later, the WPS
indicator will be off, which means the WPS connection is completed. Repeat the above
steps to add more clients. At present, the WPS supports up to 32 clients
• PIN: If this option is enabled, you need to enter a PIN code matching with the one in the
wireless client.
WPS Summary: It displays the current status of Wi-Fi protected setting, including authentication
mode, encryption type, default key and other information.
WPS Current Status: Idle means WPS is in idle state. Start MSC process means the process has
been started and is waiting for being connected. Configured means the negotiation between
server and clients is successful.
WPS Configured: Yes means WPS feature is enabled and goes into effect. No means it doesn’t
takes effect. Usually when the AP-security has been enabled, it displays No.
WPS SSID: It displays the main SSID set by WPS. WPS only takes effect in main SSID
WPS Auth. Mode: The authentication mode adopted by WPS, usually it is WPA/WPA2-Personal
mode.
WPS Encryption Type: The encryption type used by WPS, generally AES/TKIP.
WPS key: The effective key automatically generated by AP.
AP PIN: The PIN code used by default.
31
