731541
9
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
Manual
9
c) To exit the memory record function, press and hold the "REC" button for at least 2 seconds. The
display will revert to the current reading.
LCD Backlight ON/OFF
After turning the power ON, the "LCD Backlight" will be activated automatically. During the measurement,
press the "Backlight Button" (4-2) once to turn OFF the "LCD Backlight". Press the "Backlight Button"
once again to turn ON the"LCD Backlight" again.
6 Datalogger
Preparation before using the datalogger function
a. Insert an SD card (1 GB to 16 GB, optional) into the "SD card socket" (4-18). The front side of the SD
card should face the bottom of the case.
b. If you use the SD card with the meter for the first time, it is recommended to take care of the "SD card
Format" first.
c. Time setting
When the meter is used for the first time, the clock time should be set exactly.
d. Decimal format setting
The numerical data structure of the SD card is decimal by default, for example "20.6" "1000.53".
However, in certain countries (Europe ...) the "," is used as the decimal point, for example " 20, 6 "
"1000,53". Under these circumstances, the decimal character should be changed first.
Auto datalogger (Set sampling time 1 second)
a. Start the datalogger
Press the "REC Button (4-4) once. The LCD will show the text "REC". Then press the "Logger Button" (4-
8); " REC " will flash and the beeper will sound. At the same time, the measuring data along with the time
information will be saved to the memory circuit.
b. Pause the datalogger
When using the datalogger function, when you press the "Logger Button" (4-8) once, the datalogger
function will be paused ( stop to save the measuring data into the memory circuit temporarily). "REC" will
stop flashing.
Note: If you press the "Logger Button" (4-8) once again, the datalogger function will be carried out again
and the text "REC" will flash.
c. Finish the datalogger
When pausing the datalogger, press and hold the "REC Button" (4-4) for at least two seconds, the "REC"
indication will disappear and the datalogger function will be finished.
Manual datalogger (Set sampling time = 0 seconds)
a. Set sampling time to 0 seconds
Press the "REC Button (4-4) once. The LCD will show the text "REC", then press the "Logger Button" (4-
8) once, "REC" will flash once and the beeper will sound once. At the same time, the measuring data
along with the time information and the position no. will be saved to the memory circuit.
Note:
* For the 4-channel measurement, the lower right display area will show the position/location no.
(P1, P2... P99) and the T4 measurement value alternately.
* During execution of the manual datalogger function, use the "▲ Button" (4-5) or the "▼ Button"
(4-6) to set the measuring position (1 to 99, for example room 1 to room 99) to identify the
measurement location.
b. Finish the Datalogger
Press the "REC Button" (4-4) continuously for at least two seconds. The "REC" indication will disappear
and the datalogger will be finished.
Check time information
During normal measurement (no datalogger), when you press the "Time check Button" (4-
7) once, the lower LCD display will present the time information Year/Month, Date/Hour, Minute/Second.
Check sampling time information
During normal measurement (no datalogger), when you press the "Sampling Button" (4-8) once , the
lower LCD display will present the sampling time information in the second unit.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw PCE instruments PCE-T 390 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van PCE instruments PCE-T 390 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van PCE instruments PCE-T 390

PCE instruments PCE-T 390 Gebruiksaanwijzing - Nederlands - 15 pagina's

PCE instruments PCE-T 390 Gebruiksaanwijzing - Deutsch - 14 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info