25
7 Checking Static Stability before using the Mobility Base with Seating Shell
After mounting a seating system, the stability of the entire product must be checked.
If static stability is less than 10°, the EN 12183 standard stipulates that the user and/or attendant are informed
on this in a clear warning note to allow the user/ attendant to take corresponding precautions for the user's
safety.
8 Adjustment and Adaptation Possibilities
Seat Tilt
Figure 7 Figure 8
Inclined and Upright Position – You can tilt the seat of your mobility base with seating shell by approx. 35° to the– You can tilt the seat of your mobility base with seating shell by approx. 35° to the You can tilt the seat of your mobility base with seating shell by approx. 35° to the
rear (Fig. 8) by pressing the release lever (Fig. 7). This will cancel the blocking provided by the gas compression
spring. When the desired angle is reached, stop pressing the lever. When the desired angle is reached, stop pressing the lever.When the desired angle is reached, stop pressing the lever.
- Please note, that the seat may only be tilted with the anti-tipper in functional position.Please note, that the seat may only be tilted with the anti-tipper in functional position.
- When using 22" and 24" wheels, the inclination range is restricted (see 'Technical Data').When using 22" and 24" wheels, the inclination range is restricted (see 'Technical Data').
Figure 9 Figure 10
Transport
Minimizing the Dimensions – If your mobility base for seating shells and the seating shell used are equipped– If your mobility base for seating shells and the seating shell used are equipped If your mobility base for seating shells and the seating shell used are equipped
with an interface adapter system with a quick-release lock, you can make the mobility base with seating shell
more manageable e.g. to stow when traveling by car. First remove the seating system and the footrests from First remove the seating system and the footrests fromFirst remove the seating system and the footrests from
the mobility base. Pull the locking strap (Fig. 9, item A) and fold the back frame to the front until it rests on the Pull the locking strap (Fig. 9, item A) and fold the back frame to the front until it rests on thePull the locking strap (Fig. 9, item A) and fold the back frame to the front until it rests on the
seat tubes (Fig. 10). When unfolding, make sure that the stud (Fig. 9, item B) engages in the bore hole (Fig. 9, When unfolding, make sure that the stud (Fig. 9, item B) engages in the bore hole (Fig. 9,When unfolding, make sure that the stud (Fig. 9, item B) engages in the bore hole (Fig. 9,
item C) provided for this. Make sure that the back frame fully engages on both sides when unfolding it.
Safety in motor vehicles - The frame features four fixing eyelets (Fig. 10, item A). If you want to secure the If you want to secure theIf you want to secure the
mobility base with straps, use these attachment points only.
B
A
A
A
C
