682694
20
Verklein
Vergroot
Pagina terug
1/88
Pagina verder
20
To avoid hand injuries, do not grip between rear wheel and wheel lock while maneuvering your mobility
base with seating shell.
Be careful with your fingers when using the mobility base with seating shell or during adjustment and
assembly works (risk of injuries).
Be sure to re-tighten the screws after all adjustments.
Maximum load including seating shell is 120 kg.
Your hands may become warm due to slowing down from high speed or on longer slopes. This is es-
pecially true if the push rings are aluminum.
When using your mobility base with seating shell outdoors, wear leather gloves. Gloves provide you with
a better grip and protect your fingers from dirt and hot metal.
Using your Otto Bock Product as a Seat in Motor Vehicles
We recommend that, wherever and whenever possible, users transfer to the seats installed in the mo-
tor vehicle and use the corresponding vehicle restraint systems, because this is the only way to ensure
optimum protection of the passengers in case of an accident.
It is, however, possible to use your Otto Bock product Dino® 3 as a seat in a motor vehicle, provided
that the Otto Bock safety elements and appropriate restraint systems are used. For more information,
please refer to our instructions for use: “Using your wheelchair/ mobility base with seating shell
or buggy as a seat in motor vehicles”, article number: 646D158.
Exchanging / Shifting the Interface Adapters
By loosening the screw connection (Fig. 1, item 1) to the frame (Fig. 1, item 2), the interface adapter (Fig. 1, item 3)
can be shifted or exchanged. At the moment, interface adapters for the following seating systems are available:
• Type “Trapez” • Shape/Moss
• Type “Parallel” • Type “R82/Ato Form”
• Type “Interco” • Type “Dräger”
Mounting of Seating Systems
When using seating systems of other manufacturers, please observe the corresponding manufacturer’s instructions
for use.
Otto Bock will assume no liability for combinations of interface adapters which are not mentioned above.
Removing and mounting seating systems being equipped with the “Parallel” seating shell interface (Fig. 2)
The seat can be easily removed from the mobility base to lessen the weight of the chair during transport.
This also allows for easy transfer between indoor and outdoor mobility bases.
Position yourself on the right side (when in the forward direction) of the seating unit. Hold the head area of the back
part of the seat with one hand.
Now reach beneath the seat and pull the angled disengaging lever towards the footrest assembly to release the seat
attachment. Tilt the seat back to over 45° and remove it by lifting upwards.
To remount the seat onto the mobility base, hold the seat as described above and first put the locking unit at an angle
of approx. 45° on the posterior tube of the seat adapter. Press the anterior seat edge onto the mobility base until the
seat audibly snaps in place. Make sure it’s secure by giving the seat a few short tugs.
Removing and mounting seating systems that have a Trapez seating shell interface (Fig. 4)
For transport in a car or to distribute the weight into two, more manageable loads, the seat can be easily removed
from the mobility base. This also allows for easy transfer of the seat between indoor and outdoor mobility bases.
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Otto Bock Dino 3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Otto Bock Dino 3 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Zweeds als bijlage per email.

De handleiding is 0,91 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info