01 / 2010 C2000Page 156
Operation
RemovingtheRecaro®SeatfromtheChassis
1.
Pull the release strap on the right and left side beneath
the seat bottom to the front. In this way, you loosen the
right and left bolt that serve to lock the seat to the frame.
2.
To release the posterior seat adapter from the retainer
bushings, slightly tilt the seat to the rear and slide back a
little.
3. Remove the Recaro® seat.
AttachingtheRecaro®SeattotheChassis
CAUTION
Riskofinjuryifthelockingboltsarenotengaged. Beim
When mounting the Recaro® seat, the seat adapter must
be securely attached to the retainer bushings. The anterior
locking bolts must have snapped into place up to the key
ring.
Place the posterior edge of the Recaro® seat on the end of
the seat frame.
1.
Slide the seat forward until the posterior seat adapter
hangs in the retainer bushings.
2.
Tilt the seat to the front until the locking bolts engage with
the seat frame up to the key ring.
6.7.5ContourSeat(Optional)
The C2000 power wheelchair can be equipped with a contour
seat of different sizes. This results in greater comfort and
allows for more adaptation possibilities.
INFORMATION
Only authorised personnel is allowed to mount a contour
seat to the power wheelchair.
Fig.29 Contourseat
