01 / 2010 C2000Page 148
Operation
Pull back the metal slide on the battery charger‘s plug and
disconnect the battery charger from the power wheelchair.
6.
Turn on the controls. The power wheelchair is ready for
driving.
Fig.22 Connectingthebatterychargertothepowerwheelchair
1 Charging receptacle
The battery charger indicates the following states:
Display Function
Yellow LED is lit Battery is charging
Yellow LED flashes Battery is charged to 90 %
Green LED is lit Battery is fully charged
Red LED is lit Incorrect polarity (unplug the
battery charger from the wall
socket)
Red LED flashes Battery is defective, or charging
time has been exceeded
Tab.5 Batterycapacityindicatoronthebatterycharger
If none of the LEDs are lit, there is no power supply.
6.7 SeatFunctions
WARNING
Riskofpinchingorcrushingintheelectricseatadjustment
range. When operating the seat height adjustment, back
angle adjustment (optional) or seat tilt (optional), there are
pinch and shear points in the area between the seat frame
and wheelchair frame caused by the construction.