GB
Thank you for purchasing a Group 0+ car seat. If this seat does not give
you full satisfaction, if you would like to change an accessory or obtain
any help with regard to this product, you can contact our customer
services department (details on the back of this guide).
SAFETY INSTRUCTIONS
WARNING: Read these instructions carefully before use and keep this
guide in case you need to refer to it in the future. Failure to follow these
instructions may affect your child’s safety. To avoid any risk of falling,
ensure that the handle of your Group 0+ is correctly locked and that
your child’s safety harness is always fastened. Only install your Group
0+ seat on a forward facing seat fitted with a 3 point safety belt (1).
DO NOT USE THIS CHILD SEAT ON A PASSENGER SEAT FITTED WITH
AN AIRBAG.
• Rigid elements and plastic parts of the child restraint device must be
positioned and installed so that they do not, under normal vehicle us-
age conditions, become jammed under a moveable seat or in the vehicle
door.
• Keep all straps used to attach the restraint device to the vehicle taut,
and adjust the straps used to restrain the child. It is also important that
the the straps are not twisted.
• Replace the device when it has been subjected to violent stresses in
an accident.
• It is dangerous to modify or add to the device in any way without ap-
proval of the competent authority. It is also imperative to follow meticu-
lously the instructions provided by the manufacturer concerning instal-
lation of the child restraint device.
• Keep the seat sheltered from sunlight, so that the child cannot get
burned.
• Do not leave children unsupervised while in a child restraint device.
• Make sure that luggage and other objects likely to cause injuries to the
occupant of the seat if impact occurs are firmly secured.
• Do not use the child restraint device without the seat cover.
• Do not replace the seat cover with a cover other than the one recom-
mended by the manufacturer, as it directly influences the behaviour of
the restraint device.
• If you are in any doubt about installation and proper use of your seat,
please contact the manufacturer of the child restraint device.
• Install your child restraint system at the seating positions arranged
in the ‘Universal’ category in the users’ manual, using the primary path
of the belt.
• Do not use load-bearing contact points other than those described in
the instructions and marked on the restraint system.
• Always give preference to rear seats, even if the highway code allows
installation at the front.
• Always make sure that the car seatbelt is fastened.
• Always check that there is no food debris or other such matter in the
buckle.
• In winter take care not to secure the child in with clothes that are too
bulky.
Your Group 0+ (2)
1. Shell
2. Cover
3. Shoulder strap
4. Ergonomic handle
5. Sun canopy
6. Support pillow
7. Belt pad
8. Lap belt guide (x2)
9. Harness buckle
10. Harness release button
11. Crotch strap
12. Adjustment strap
13. Diagonal belt guide
In-car installation
WARNING ! Do not install your Group 0+ seat on the front seat of a ve-
hicle fitted with an AIRBAG. Always position your Group 0+ seat facing
rearwards.
Place the child seat on the front or back seat of your vehicle, always fac-
ing rearwards, with the handle in the vertical position (3).
Buckle the belt (4).
Pull out the seat belt and pass the lap section through the side guides
(5) (6). Pull and pass the diagonal section of the belt behind the car seat,
and slide it into the guide at the back of the shell (7) (8). Ensure that the
belt is not twisted and stretch it as tightly as possible (9).
