301030
28
Verklein
Vergroot
Pagina terug
1/31
Pagina verder
28
ENG
“When I press the phone button, I hear the busy tone.
You will hear a busy tone if the line is engaged with another handset that is registered to the same base
unit. Check the LCD display area for the EXT symbol. This symbol indicates that someone else is
already on the line.
“When I press the keys on my handset, nothing happens. The display is showing the
symbol.
The
symbol means that the keypad lock feature has been activated. Refer to page 23 for
instructions on how to unlock the keypad.
“When I press the keys on my handset, digits appear on the display but I cannot make an outside
call.
You may have inadvertently activated the call barring function on this handset, which prevents
calls from being placed.
The handset may be unable to find the base unit. Try moving closer to the base unit. If the
problem persists, try a different position for the base unit, following the instructions on page 6.
If you have registered additional handsets to the same base unit, make sure they are not already
on a call. The LCD display on your handset will display the EXT symbol if the line is engaged.
The dial mode setting may be incorrect. Refer to page 10 for instructions on how to set the dial
mode.
“My call was cut off when I went out of range of the base unit. Now I cannot use my handset.
Please move the handset closer to the base unit. You may want to consider moving the base unit to
achieve a greater transmission range. Refer to page 6 for instructions.
“I hear a tone while I am using my handset, and the battery symbol on the display looks empty.
The battery needs to be recharged. Put the handset into the charging cradle of the base unit until the
battery symbol looks full
. It may take up to 15 hours to fully recharge.
“I just recharged the batteries, but I still get a warning that they are not charged.
The batteries may need to be replaced. Rechargeable batteries gradually lose their ability to be
recharged as they get older. Replace the batteries with two rechargeable Ni-MH batteries (AAA size).
“The handset does not ring when a call comes in.
Check that you have not turned off the ringer volume level. Refer to page 11 for instructions.
Check that the total REN value of all equipment connected to your telephone line is not more than
4. You may need to disconnect one or more telephones to see if this helps.
“The caller display feature is not working”
You must subscribe for caller ID services through your telephone network provider for the caller ID to
display on your ThermoDECT telephone. Please check with your provider.
“The caller display works but the caller’s name does not display even when I am sure the caller is
using the same number that I entered in the phone book.
If the callers number does not exactly match what you have entered in your phone book, including the
STD code and any prefixes, the phone book cannot match the name to the caller ID. Check the phone
book to make sure the full number is stored there.
“I pressed the phone button several times, but keep getting the busy tone and cannot get the blue
LED light to display on the base unit.
Your handset may no longer be registered with the base unit. Unplug the AC power source from the
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Oregon Scientific td 339 dect bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Oregon Scientific td 339 dect in de taal/talen: Engels als bijlage per email.

De handleiding is 1,08 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info