Make sure bike pod sensor is paired with the watch before cycling.
The setup mainly includes the following parts:
• Lap
• Interval
• Rest
• HR Zone
• Wheel size
Wheel size setup
1. In CYCLING mode, press top (1) button to enter, and
the paired sensor icons display on the screen. Press
bottom (3) button to skip if the sensor is added.
2. Press middle (2) button to enter setup mode.
3. Toggle middle (2) button until adjust Wheel size displays.
4. Press top (1) button to enter.
5. Press top (1) button again to increase the value or press bottom (3) button to decrease the value.
6. Press middle (2) button to confirm selection.
USEFUL REFERENCE
About Bike Wheel Size
Match the ETRTO or wheel size diameter printed on the wheel with the wheel size setting at the right hand column of the table below. Input the relevant wheel size setting
number after bike pod is paired.
ETRTO Wheel size diameter (inches) Wheel size setting (mm)
25-559 26 x 1.0 1884
23-571 650 x 23C 1909
35-559 26 x 1.50 1947
37-622 700 x 35C 1958
47-559 26 x 1.95 2022
20-622 700 x 20C 2051
52-559 26 x 2.0 2054
23-622 700 x 23C 2070
25-622 700 x 25C 2080
28-622 700 x 28 2101
32-622 700 x 32C 2126
42-622 700 x 40C 2189
47-622 700 x 47C 2220
Wheel sizes on the above table are for reference only as wheel size depends on the wheel type and air pressure.
VIEW EXERCISE RECORD DURING CYCLING
You could start cycling by following the steps below, and if you set up the Interval, the distance or timer will count down.
Make sure the watch has enough memory, otherwise no memory displays when you press button after CYCLING mode.
To view cycling records:
1. In CYCLING mode, press top (1) button to enter, and the paired sensor icons display on the screen. Press bottom (3) button to skip the searching mode if the sensor is added.
