492720
6
Verklein
Vergroot
Pagina terug
1/35
Pagina verder
© Calibre UK Limited Issue 2.00 30 March 2012, W: www.calibreuk.com
T:+44 1274 394125 F: +44 1274 730960 E: techsupport@calibreuk..com 2
INTRODUCTION
1.1.
General Introduction
HQView-5xx is a very flexible image scaler developed specifically for driving large screen displays and
multiple screen applications from video or graphics sources.
HQView-5xx features state of the art digital image processor which provides market leading HD& SD
per-pixel multiple Iow-angle motion-adaptive de-interlacing and automatic film pull-down correction for
3:2 and 2:2, significantly outperforming the capabilities of benchmark competitor products. HQView-5xx
features excellent image processing algorithms for the very best scaling, film and video noise reduction
and MPEG artefact reduction.
HQView-5xx uses a very flexible high performance video input front end including true component
video support in analog YPbPr and RGBS formats and 3GSDI/HDSDI/SDI digital formats as well as
composite (CVBS) and YC/S-Video inputs. A very high performance video decoder is utilised with 4x
oversampling and 3D Y/C separation for outstanding video image clarity. HDMI and DVI video with
HDCP encryption is also supported, as are computer graphics inputs in SVGA analogue and HDMI/DVI
digital formats.
The output format can be set to I/O Lock mode where it locks the output frame rate to the input frame
rate dynamically without frame rate conversion so as to reduce system latency, or it can be set to a
fixed output frame rate for driving basic screens which are not 50Hz-compatible. A Low latency mode
with non-motion adaptive reduced processing is available to further reduce latency. The output format
can also be set to lock to an externally provided synchronization signal.
Outputs are available in VGA analog and DVI digital formats as well as 3GSDI serial digital formats
which are useable simultaneously so that one output can drive the screen while the other runs a local
monitor. Note that not all PC output formats are supported by 3GSDI standards in which case the
3GSDI output is disabled. Also note that if an HDCP encrypted signal is connected to the HDMI or DVI
input, the DVI output signal will be similarly HDCP encrypted and the VGA analog output as well as the
3GSDI output will be disabled.
Interlaced outputs are supported and can be run through a vertical temporal filter greatly reducing
interlace flicker.
HQView-5xx supports Pan, Zoom and Tilt to select a part of the input image, fill the screen and pan
within it.
HQView-5xx can be operated with different firmware. At time of issuing this document three firmware
options are available. Each firmware provides different feature sets controlled through the OSD. Thus,
the OSD menu systems of the firmware options may deviate from each other. Special emphasize is
given in the discussion of the OSD menu system in the corresponding chapters.
In the basic configuration HQView-500S used for single display installations Picture in Picture
functionality is provided.
The next stage is the HQView-510 for multi screen or multi projector installations. Picture in Picture is
replaced by Auto Zoom and Edge Blend with elaborate Black Level Uplift. Edge Blend allows to
electronically reduce the brightness level of certain image regions to match the brightness of
overlapping areas. Auto Zoom automatically crops and zooms the input video image to display the
section of the total image on the corresponding projector or screen. Also embedded warp allowing to
adjust the image in a projection scenario to match a rotated, tilted or curved screen is provided. For
9:16 portrait mode signage special predefined warp maps are available to rotate and stretch a video
image to fill a +/-90° rotated display panel.
HQView-520/530 adds free form warp capability for certain non-flat screens in a multi projector
installation. Warp maps created with the PC tool “Warp Generator” can be uploaded into HQView-
520/530 and processed accordingly.
System control is via an OSD controlled by keys on the front panel or through the inbuilt TCP/IP web
server. HQView-530 also features a front panel LCD menu and a jog wheel instead of keys for easier
and faster set-up.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Optoma HQView-500 Series bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Optoma HQView-500 Series in de taal/talen: Engels als bijlage per email.

De handleiding is 1,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info