EN-22
Connecting an S-Video source device
Examine your Video source device to determine if it has an unused S-Video
output socket available:
If so, you can continue with this procedure.
If not, you will need to reassess which method you can use to connect to
the device.
To connect the projector to an S-Video source device:
1. Take an S-Video cable and connect one end to the S-Video output
socket of the Video source device.
2. Connect the other end of the S-Video cable to the S-VIDEO socket on
the projector.
Important
If the selected video image is not displayed after the projector is turned on and the
correct video source has been selected, check that the Video source device is turned
on and operating correctly. Also check that the signal cables have been connected
correctly.
If you have already made a Component Video connection between the projector and
this S-Video source device using Component Video connections, you need not
connect to this device using an S-Video connection as this makes an unnecessary
second connection of poorer picture quality. See “Connecting Video source devices”
on page 20 for details.
Connecting a composite Video source device
Examine your Video source device to determine if it has a set of unused
composite Video output sockets available:
If so, you can continue with this procedure.
If not, you will need to reassess which method you can use to connect to
the device.
To connect the projector to a composite Video source device:
1. Take a Video cable and connect one end to the composite Video output
socket of the Video source device.
2. Connect the other end of the Video cable to the VIDEO socket on the
projector.
Important
If the selected video image is not displayed after the projector is turned on and the
correct video source has been selected, check that the Video source device is turned
on and operating correctly. Also check that the signal cables have been connected
correctly.
You need only connect to this device using a composite Video connection if
Component Video and S-Video inputs are unavailable for use. See “Connecting Video
source devices” on page 20 for details.
