2. Place the disc (with label side facing users) to the door and the unit will draw in the disc
automatically.
1. Power on and switch signal source to DVD mode and the unit begins to work.
3. Press [PLAY] button
to begin playing disc.
4. Press [STOP] button to stop playing.
6. When finishing playing, switch signal source to other working state and press [STANDBY]
button to make the unit enter standby state. Please pull
out the power plug from power
socket when not using the unit for a long time.
PLAYBACK
The unit begins to read disc information.
CDDVD
MPEG4
5. Press [EJECT] button to take out disc or quickly change to DVD mode from one of other
modes.
1.
If the TV system is PAL, press [P/N] button to select PAL system and TV screen
displays:
""
PAL
SELECT TV SYSTEM
According the connected TV set's color system, set the system of this unit to match to the TV set.
2. If the TV system is NTSC, press [P/N] button to select NTSC s ystem and TV screen
displays:
""
NTSC
DVD
MPEG4
When the unit is playing a disc, press [STOP] button the first time and the unit enters pre-stop state,
while press [STOP] button again and the unit enters stop state.
At the pre-stop state, if you press [PLAY] or
[OK] button, the unit will continue to play from the
stopped point.
At the stop state, if you press [PLAY] or [OK] button, the unit will play from the beginning point of
the disc.
Press [STOP] button when playing MPEG4 discs and the unit enters stop state directly.
DVD OPERATION
22
EJECT
STANDBY
PLAY
STOP
