637408
94
Verklein
Vergroot
Pagina terug
1/96
Pagina verder
USER MANUAL
READ CAREFULLY BEFORE OPERATION
®
Blu-ray Disc Player BDP-103D (EU)
i
Table of Contents
IMPORTANT INFORMATION
.......................................................1
Important Safety Instructions .................................................................................... 1
Precautions ................................................................................................................. 2
CE Statement .............................................................................................................. 2
Trademarks ................................................................................................................. 3
Compatible Disc Types ............................................................................................... 3
Discs that cannot be played ............................................................................................................. 4
Notes about BD-ROM compatibility ................................................................................................. 4
Disc care and handling .................................................................................................................... 4
Copyright Protection ................................................................................................... 4
Cinavia Notice ............................................................................................................. 4
Gracenote Notice ........................................................................................................ 5
Region management information ............................................................................... 5
Accessories ................................................................................................................. 5
INSTALLATION ...........................................................................6
Front Panel Controls ................................................................................................... 6
Front Panel Display Windows ..................................................................................... 6
Rear Panel Connectors ............................................................................................... 7
Remote Control ........................................................................................................... 8
Remote Control Buttons................................................................................................................... 8
Back Side ......................................................................................................................................... 9
Battery Installation ........................................................................................................................... 9
Using the Remote Control................................................................................................................ 9
Changing the Remote Code .......................................................................................................... 10
Changing the Backlight Method ..................................................................................................... 10
Common Connection Methods ...................................................................................11
Connecting to an A/V Receiver via HDMI ...................................................................................... 11
Connecting to a TV and A/V Receiver via Dual HDMI ................................................................... 12
Connecting to a TV via HDMI ........................................................................................................ 13
Connecting to Two TVs via HDMI .................................................................................................. 14
Connecting to a TV via DVI............................................................................................................ 15
Alternate Audio Connections .....................................................................................16
Connecting to an A/V Receiver or Amplifier via Analogue Outputs ............................................... 16
Connecting to an A/V Receiver or Amplifier via S/PDIF (Coaxial / Optical) ................................... 17
HDMI / MHL INPUT to BDP-103D...............................................................................18
Connecting to the Internet .......................................................................................19
Internet connection through Ethernet cable ................................................................................... 19
ii
Custom Installation ...................................................................................................21
External IR (Infrared Remote) Installation ......................................................................................21
RS232 Control ................................................................................................................................21
Quick Start Guide ......................................................................................................22
Power On and Play ........................................................................................................................22
Select the Best Output Resolution .................................................................................................22
Determine the Display Aspect Ratio ..............................................................................................23
BASIC OPERATIONS ................................................................ 24
Disc Playback ............................................................................................................24
OPTION Menu .............................................................................................................24
Fast Playback ............................................................................................................25
Pause and Frame-by-Frame .......................................................................................25
Slow Playback ............................................................................................................26
Blu-ray Disc Menu Playback ......................................................................................26
DVD Menu Playback ...................................................................................................26
On-Screen Display ......................................................................................................27
Volume Control ..........................................................................................................27
Mute ............................................................................................................................28
Audio Language/Track Selection ..............................................................................28
Subtitle Selection ......................................................................................................28
HDMI / MHL INPUT Selection ....................................................................................29
Audio Return Channel (ARC) Selection .....................................................................29
BD-Live .......................................................................................................................30
ADVANCED OPERATIONS ........................................................ 31
Output Resolution ......................................................................................................31
Zooming and Aspect Ratio Control ...........................................................................32
Zoom Levels for HDMI Output .......................................................................................................32
Subtitle Shift ..............................................................................................................34
Repeat Playback ........................................................................................................34
Repeat a Selected Section ........................................................................................35
Shuffle and Random Playback ..................................................................................35
Playback by Chapter or Track Number .....................................................................35
Playback from a Specific Location ...........................................................................36
DVD and Blu-ray Discs ..................................................................................................................36
CD and SACD Discs .......................................................................................................................37
Memory and Automatic Resume ...............................................................................38
Viewing Pictures on DVD-Audio Discs ......................................................................38
Pure Audio Mode ........................................................................................................38
Internet connection through wireless adaptor ................................................................................ 20
iii
Playback from USB Flash Drive ................................................................................ 40
In-home Network Media Sharing .............................................................................. 41
Internet Streaming on HOME Menu .......................................................................... 42
Playing Music Files ................................................................................................... 43
Playing Movie Files ................................................................................................... 45
Viewing Photo Files .................................................................................................. 46
Adding Background Music ........................................................................................ 47
SETUP MENU OPTIONS .......................................................... 48
Using the Setup Menu System .................................................................................. 48
Playback Setup ......................................................................................................... 51
Video Setup ............................................................................................................... 53
Picture Adjustment ......................................................................................................................... 57
HDMI Options ................................................................................................................................ 61
Audio Format Setup .................................................................................................. 63
Audio Signal Reference Chart ....................................................................................................... 65
Recommended Audio Format Options .......................................................................................... 66
Audio Processing Setup ............................................................................................ 68
Speaker Configuration ................................................................................................................... 68
Other Audio Processing Settings ................................................................................................... 72
Device Setup ............................................................................................................. 74
Network Setup .......................................................................................................... 78
REFERENCES ........................................................................... 82
Useful Notes .............................................................................................................. 82
Troubleshooting ........................................................................................................ 82
Specifications ........................................................................................................... 84
User Manual Updates Online .................................................................................... 84
Language Code List .................................................................................................. 85
Gracenote Terms of Use ............................................................................................86
LIMITED WARRANTY ................................................................89
OPPO Digital UK Ltd. Limited Two Years Warranty ................................................. 89
DARBEEVISION, INC.LICENSE AGREEMENT .............................................................87
MEDIA FILE PLAYBACK ........................................................... 40
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operation and maintenance (servicing)
instruction in the literature accompanying the appliance.
1
WARNING:
CAUTION:
This label is located on the laser protective housing inside the
product.
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or
pinched, particularly at plug, receptacle, and the point
where it exits from the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the
cart/apparatus combination to avoid
injury from tip-over.
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
15) Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the
like.
IMPORTANT INFORMATION
DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. REPLACE ONLY WITH THE SAME OR
EQUIVALENT TYPE.
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS
OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE
PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN
THE CABINET. REFER SERVICING TO QUALIFIED
PERSONNEL ONLY.
THE APPARATUS SHALL NOT BE EXPOSED TO
DRIPPING OR SPLASHING AND THAT NO OBJECTS
FILLED WITH LIQUIDS, SUCH AS VASES SHALL BE
PLACED ON THE APPARATUS.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to
the presence of uninsulated “dangerous voltage”
within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
2
I M P O R T A N T I N F O R M A T I O N
Precautions
Before connecting the AC power cord to the appliance,
make sure the voltage designation of the appliance
corresponds to the local electrical supply. If you are
unsure of your power supply, contact your local power
company. The acceptable power input range is AC ~
100V-240V, 50/60Hz.
The apparatus with CLASS I construction shall be
connected to a MAINS socket outlet with a protective
earthing connection.
The player is still receiving power from the AC power
source as long as it is connected to the wall outlet,
even if the player itself has been turned off.
Unplug the power cord if you are not going to use the
product for an extended period of time. Hold the power
plug when unplugging. Do not pull on the cord.
The main plug is used as the mechanism for cutting off
power, therefore make sure it is easy to unplug.
CE mark
This product compiles with European Low Voltage
(2006/95/EC), Electromagnetic Compatibility (2004/108/EC)
and Environmentally-friendly design of Energy-related
Products (2009/125/EC) Directives when used and installed
according to this instruction manual.
To ensure proper ventilation around this product, do not
place this product on a sofa, bed or rug. When installing
this product on a wall or bookshelf, you need to provide
appropriate space.
High temperature will lead to abnormal operat
ion of this
unit. Do not expose this unit or batteries to direct sunlight
or near other heating objects.
When moving the player from a cold location to a warm
one, or vice versa, moisture may condense on the laser
pickup unit inside the player. Should this occur, the
player may not operate properly. In such a case please
turn the unit on for 1-2 hours (without a disc) to facilitate
moisture evaporation.
WEEE symbol
Correct Disposal of This Product. (Waste Electrical
& Electronic Equipment) Applicable in the European
Union and other European countries with separate
collection systems.
This marking on the product, accessories or literature
indicates that the product and its electronic accessories (e.g.
remote handset) should not be disposed of with other
household waste at the end of their working life. To prevent
possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from
other types of ho
usehold waste and recycle them responsibly
to promote the sustainable reuse of material resources. Users
should contact either the retailer where they purchased this
product, or OPPO Digital UK Ltd , for details of where and how
they can arrange for environmentally safe recycling.
I M P O R T A N T I N F O R M A T I O N
3
Trademarks
“Blu-ray Disc”, “Blu-ray 3D”, “BONUSVIEW” and “BD-
Live” are trademarks of Blu-ray Disc Association.
Java and all Java-based trademarks and logos are
trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and other
countries.
DVD Logo is a trademark of DVD Format/Logo Licensing
Corp., registered in the U.S., Japan and other countries.
Super Audio CD, SACD and the SACD logo are joint
trademarks of Sony Corporation and Philips Electronics
N.V. Direct Stream Digital (DSD) is a trademark of Sony
Corporation.
“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.
Designed for Windows Media, Microsoft, HDCD, and the
HDCD logo are trademarks or registered trademarks of
Microsoft Corporation in the United States and/or other
countries.
Manufactured under license under U.S. Patent Nos:
5,956,674; 5,974,380; 6,226,616; 6,487,535;
7,212,872; 7,333,929; 7,392,195; 7,272,567 & other
U.S. and worldwide patents issued & pending. DTS-
HD, the Symbol, & DTS-HD and the Symbol together
are registered trademarks & DTS-HD Master Audio is
a trademark of DTS, Inc. Product includes software.
© DTS, Inc. All Rights Reserved.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered tradema
rks of
HDMI Licensing LLC.
“Pandora” is trademark of Pandora, Inc.
“Gracenote” is trademark of Gracenote, Inc.
“Cinavia” is trademark of Verance Corporation.
All other trademarks are the properties of their
respective owners.
Compatible Disc Types
nocI launaM serutaeF ogoL
BD: Supports Blu-ray with Bonus View and BD-Live content, including Blu-ray
3D discs. A 3D-capable display with compatible glasses is required for 3D
playback. BD-R/RE, both single- and dual-layer are also supported.
DVD: Plays commercially-released DVDs, as well as finalized DVD±R/RW.
DVD-A: High-resolution stereo or multi-channel audio. Some DVD-Audio discs
also contain a DVD-Video portion.
DVD-A
SACD: High-resolution stereo or multi-channel audio. Note: some SACDs use
a hybrid format with both a CD and a high resolution DSD layer.
SACD
CD: Supports standard Red Book CDs, as well as HDCD and CD-R/RW.
AVCHD: High-definition digital video camera format, often in the form of a
DVD±R or flash memory.
“Netflix” is a registe
red trademark of Netflix, Inc.
“480i/480p/720p/1080i/1080p” up-converting arrow logo,
“Source Direct” and “True 24p” logos are trademarks of
OPPO Digital, Inc.
“Darbee” and “Darbee Visual Presence” are trademarks
of Darbee Vision, Inc.
“VRS ClearView” and “Video Reference Series” are
trademarks of Silicon Image, Inc.
I M P O R T A N T I N F O R M A T I O N
4
Discs that cannot be played
BDs with cartridge
DVD-RAMs
HD-DVDs
Data portion of CD-Extras
DVDs / Blu-Rays with a region code other than 2 or B
Some Dual-Discs: A Dual-Disc is a two-sided disc with
DVD-video on one side and digital audio on the other
side. The digital audio side does not meet the technical
specifications of the Red Book CD format so playback is
not guaranteed.
Audio discs with copy-protection may not be playable.
Notes about BD-ROM compatibility
Since the Blu-ray Disc specifications are new and evolving, some discs may not play properly depending on the disc type, version
and encoding. It is possible that a Blu-ray Disc manufactured after the player uses new features of the Blu-ray Disc specifications.
To ensure the best possible viewing experience, the player may n
eed a firmware or software update from time to time. Please visit
OPPO Digital UK Ltd web site www.oppodigital.co.uk to check if updates are available
Disc care and handling
To keep the disc clean from scratches or fingerprints,
handle the disc by its edge. Do not touch the recorded
surface.
Blu-ray Discs record data in very high density and the
recorded layer is very close to the disc surface. For this
reason, Blu-ray Discs are more sensitive to dust and
fingerprints than DVD. Should you encounter playback
problems and see dirty spots on the disc surface, clean
the disc with a cleaning cloth. Wipe the disc from the
centre out along the radial direction. Do not wipe the
disc in a circular motion.
Do not use record cleaning sprays or solvents such as
benzene, thinner and anti-static spray.
Do not attach labels or stickers to discs as this may
cause the disc to warp or become too thick, resulting in
playback issues and a potentially stuck disc.
Avoid exposing the discs to direct sunlight or heat
source
s.
Do not use the following discs:
o Discs with exposed adhesive from removed stickers
or labels. The disc may get stuck inside the player.
o Warped or cracked discs.
o Irregularly shaped discs, such as heart or business
card shapes.
Copyright Protection
Cinavia Notice
This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced film and videos and their
soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be
interrup
ted.
More information about Cinavia technology is provided at the Cinavia Online Consumer Information Centre at http://www.cinavia.com
. To
request additional information about Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer Information Centre,
P.O. Box 86851, San Diego, CA, 92138, USA.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights of Rovi
Corporation. The use of Rovi Corporation's copyright protection technology in the product must be authorized by Rovi Corporation. Reverse
engineering and disassembly are prohibited.
I M P O R T A N T I N F O R M A T I O N
5
Region management information
This player is designed and manufactured to respond to the region management information. If the region number of a BD-Video or
DVD disc does not correspond to the region number of this player, this player cannot play the disc.
BD-Video: This player plays Blu-Ray Discs with marks containing the region code B.
DVD-Video: This player plays DVDs with marks containing the region code 2 and ALL.
Accessories
Please check that the following parts are included in your BDP-103D package:
User Manual HDMI 1.4 Cable, about 183cm
USB Wireless-N Adapter (up to 150Mbps,
802.11b/g/n compatible, 2.4GHz)
USB Extension Cable, about 137cm
Power Cable, about 137cm
Remote Control with AA Batteries
Music and Video recognition technology and related data are provided by Gracenote
®
. Gracenote is the industry standard in music
and video recognition technology and related content delivery. For more information visit www.gracenote.com.
CD, DVD, Blu-ray Disc, and music and video-related data from Gracenote, Inc., copyright © 2000 to present Gracenote. Gracenote
Software, copyright © 2000 to present Gracenote. One or more patents owned by Gracenote may apply to this product and service.
See the Gracenote website for a non-exhaustive list of applicable Gracenote patents. Gracenote, CDDB, MusicID, the Gracenote
logo and logotype, and the "Powered by Gracenote" logo are either registered trademarks or trademarks of Gracenote in the United
States and/or other countries.
Gracenote Notice
6
INSTALLATION
Front Panel Controls
1 32 4 5 6 7 8 10 119
1. POWER Button
2. POWER Status
Indicator
3. Front Panel Display
Window
4. Disc Tray
5. OPEN/CLOSE Tray
Button (with backlight)
6. IR Sensor Window
7. USB 2.0 Input
8. 3D Output Active
Indicator
9. 4K x 2K Output
Active Indicator
10. MHL-Compatible
HDMI Input
11. Playback Control
and Navigation
Buttons
Front Panel Display Windows
3
5 6
7 8
9
13
12
10
11
21
13
4
1. Mute Icon – Indicates that the audio is muted
2. Audio Type Indication – Indicates the type of audio
tracks being played
3. Disc Type Indication – Indicates the currently
playing disc type
4. Main Display – Text messages and numeric display
5. Title – When illuminated, the displayed time applies to
a title
6. Group – When illuminated, the displayed time applies
to a group
7. Chapter – When illuminated, the displayed time
applies to a chapter
8. Track – When illuminated, the displayed time applies to
a track
9. Audio Channel Indication – Indicates whether the audio
being played is 2ch stereo or multi-channel surround
10. Remaining – When illuminated, the displayed time is
the remaining play time
11. Playback Status – Indicates playback status such as
Play, Pause, Repeat, Repeat All, and Random Mode
12. Ethernet – Indicates that an active Ethernet cable is
attached
13. Wireless – Indicates that the player
is connected to a
wireless network
I N S T A L L A T I O N
7
Rear Panel Connectors
1
3
2
4
5
6
7
8 10
12
9
11
1. Ethernet LAN Port
2. HDMI Input (Back)
3. Diagnostic Video Output
4. Coaxial Digital Audio Output
5. Optical Digital Audio Output
6. HDMI 2 Output (3D Compatible)
7. HDMI 1 Output (3D Compatible)
8. USB 2.0 Input
9. USB 2.0 Input
10. IR (Infrared) Signal Input
11. RS-232C Serial Control Port
12. 7.1CH / 5.1CH / Stereo Analogue
Audio Outputs
In addition to the above connectors, the AC power inlet is also located on the rear panel. The inlet is the IEC60-
320 C14 type. Only the included AC power cord or an approved power cord with an IEC60-320 C14 type plug
should be used.
8
I N S T A L L A T I O N
Remote Control
Remote Control Buttons
1. POWER: Toggle power
STANDBY and ON
2. NETFLIX: Netflix access
button
3. PURE AUDIO: Turn
off/on video
4. NUMBER Buttons:
Enter numeric values
5. CLEAR: Clear numeric
input
6. TOP MENU: Show BD
top menu or DVD title
menu
7. ARROW and ENTER
Buttons: Navigate menu
selection
8. OPTION: Brings up the
context-related menu
9. COLOUR Buttons:
Function varies by
content
10. PLAY: Start playback
11. STOP: Stop playback
12. REV: Fast reverse play
13. PREV: Skip to pr
evious
14. AUDIO: Change audio
language or channel
15. SUBTITLE: Change
su
btitle language
16. SETUP: Enter the
player Setup Menu
17. A-B REPLAY: Repeat
play the selected
section
18. RESOLUTION: Switch
output resolution
19. OPEN: Open/close the
disc tray
20. INPUT: Select the input
source
21. VUDU: VUDU access
button (USA only)
22. MUTE: Mute audio
23. VOLUME +/-:
Increase/Decrease
volume
24. HOME: Go to Home
Menu to select media
source
25. PAGE UP/DOWN:
Show the previ
ous/next
page
26. INFO: Show/hide the
On-Screen Display
27. GOTO: Play from a
specified location
28. POP-UP MENU: Show
BD pop-up menu or
DVD menu
29. RETURN: Retu
rn to the
previous menu or mode
30. PAUSE: Pause
playback
31. FWD: Fast forward play
32. NEXT: Skip to the next
33.
DIMMER: Dim the front
panel display
34. ZOOM: Zoom in/out
and adjust aspect ratio
35.
DARBEE: Show Darbee
adjustment menu (details
on Page 59)
36. REPEAT: Repeat play
37. LIGHT: Activate the
back light for the
remote control
NOTE
When a button is pressed but its function is invalid or unavailable at the moment, the TV screen
displays a circle with a diagonal line:
1
2
3
4
5
6
7
8
10
11
2
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
9
DARBEE
I N S T A L L A T I ON
9
Back Side
1
2
3
4
5
With Battery Cover Battery Cover Removed
1. Index Finger Notch 1: When your index finger is
placed at this notch while holding the remote control,
your thumb is within easy reach of the navigation
buttons (ARROW, ENTER, TOP MENU and POP-UP
MENU).
2. Index Finger Notch 2: When your index finger is
placed at this notch while holding the remote control,
your thumb is within easy reach of the playback
control buttons (STOP, PLAY, PAUSE, PREV, NEXT,
REV, FWD).
3. Battery Cover: Remove to replace batteries or set
remote code.
4. Batterie
s: Use 2 AA or LR6 batteries.
5. Remote Code Switch: Adjust the position of the
switch to set the remote control to use the indicated
remote code (see details on page 10).
Battery Installation
1. Remove the battery
compartment cover
2. Insert batteries 3. Replace the battery
compartment cover
Using the Remote Control
When using the remote control, the front window of the remote control should be pointed to the infrared sensor
on the front panel within an angle of ±30° and a range of about 26 ft.
Within about 26ft
BDP-103D
I N S T A L L A T I O N
10
Changing the Remote Code
The remote control contains three OPPO remote codes. The default is “Code 1”. If you have other OPPO
products placed close to the BDP-103D, they may inadvertently respond to the BDP-103D remote control.
To prevent this, you can select a different remote code.
To select a new remote code, open the battery compartment cover of the remote control, and then use a ball
point pen to flip the switch to one of the positions marked as1”,2”, or “3”. Close the battery compartment
Remote Code Switch
Battery Compartment
Changing the Backlight Method
The remote control supports one of two backlight methods. By default, pressing the LIGHT button will
turn on the backlight, and pressing any other button within 10 seconds will keep the backlight on. The
alternative method will activate the backlight whenever any button is pressed; in this mode, the light will
stay on for 10 seconds, and pressing any other button will keep the backlight on. To switch between
these two backlight methods, press and hold the LIGHT button for 5 seconds.
CAUTION
Never drop the remote control or expose it to moisture.
Never expose the infrared remote sensor on the front panel to direct sunlight or other
strong light sources.
Remote may not operate consistently when batteries become low. Replace them if
operation deteriorates.
If the remote control will not be used for a long time, please remove the batteries.
Use the batteries correctly to avoid possible leakage and corrosion. Do not leave the
batteries exposed to direct sunlight or in a high temperature environment for a long period
of time. Do not heat or expose to flame. Do not mix old and new batteries. Do not use
batteries of different types at the same time. Do not attempt to recharge the batteries.
If battery leakage occurs, do not touch the liquid with bare hands. Wipe out any liquid inside
the battery compartment, and insert new batteries.
cover. Make sure that the BDP-103D player is turned on and that the disc tray is ejected. Aim the remote
control at the player. Press and hold the ENTER button for 5 seconds. The player will start using the new
remote code.
I N S T A L L A T I ON
11
Common Connection Methods
Connecting to an A/V Receiver via HDMI
HDMI Cable
HDMI Cable
(to HDMI 1 or 2)
HDMI In
Rear Panel
HDMI INHDMI OUT
AUDIO/VIDEO MULTI- CHANNEL
RECEIVER
If you have an HDMI-capable receiver that can support HDMI audio, you can simply run an HDMI
cable from the player to your receiver and enable HDMI audio on the receiver (see your receiver’s
owner’s manual for more information). The receiver usually has an HDMI output that you can
connect to your TV to pass the video signal.
NOTE
HDMI (High-Definition Multimedia Interface) is a single cable that can transport both audio and
video from your player to your display. Be aware, however, that HDMI is an evolving standard, and
there may be compatibility issues. A receiver that supports audio input over HDMI is required.
Some receivers offer HDMI ports solely for video switching. If your receiver does not have audio
input capability, please read the following sections regarding other connection methods.
In order to play multi-channel audio for all formats, the receiver must support HDMI v1.1 or later.
For Blu-ray Discs, a receiver that supports HDMI v1.4 with decoding capability for Dolby TrueHD
and DTS-HD Master Audio is preferred. Please check the specifications of your receiver to ensure
that it meets these requirements.
The HDMI outputs on the BDP-103D are HDMI v1.4, which are compatible with HDMI v1.3
and earlier versions.
Either of the two HDMI output terminals (HDMI 1 OUT and/or HDMI 2 OUT) on the rear panel of the
BDP-103D can be connected to your receiver. Preference should be given to the HDMI 1 output for
video since it is the only output to benefit from the superior Darbee Visual Presence and Silicon
Image VRS ClearView video processors.
I N S T A L L A T I O N
12
Connecting to a TV and A/V Receiver via Dual HDMI
HDMI IN
HDMI Cable 1
HDMI Cable 2
Rear Panel
AUDIO/VIDEO MULTI-CHANNEL
RECEIVER
HDMI IN
The BDP-103D provides a “Dual HDMI” connection to make sure you can enjoy the highest
possible video quality and resolution, in addition to high bit rate audio content. You can use the
included HDMI cable to connect the HDMI 1 output to your HDTV and use another HDMI cable
(not included) to connect the HDMI 2 output to your receiver by setting the Dual HDMI Output
option in the Setup Menu to Split A/V (see page 53 for details). In this way you can utilize the
dedicated video processor available for the HDMI 1 output, and allow your receiver which has
no HDMI 1.4 inputs to work without any loss to
the digital audio signals.
This configuration is recommended when you have a 3D-compatible display, but your receiver is
not 3D-compatible. This allows you to send the video signal (3D, in this case) directly to the TV and
the audio signal to the receiver to be distributed to your speakers as it normally would.
NOTE
Please refer to the notes on HDMI connections available on page 11.
If your receiver does not have HDMI audio input capability, please try the alternate
connection methods discussed on pages 16 and 17.
I N S T A L L A T I ON
13
Connecting to a TV via HDMI
HDMI Cable (to HDMI 1 or 2)
HDMI In
Video In
Rear Panel
Composite Cable (Optional)
If your TV has an HDMI input, you can use the included HDMI cable to connect the player directly to
the TV. This connection method delivers both video and audio in a pure digital format via a single
cable. The HDMI output of the player allows for the highest possible video quality and audio
resolution.
You may remove the HDMI cable and connect the DIAG (diagnostic) output to the TV through a
regular composite video cable (not included) when there is a problem with HDMI video. Only the
Setup Menu will be
visible on the TV when using this connection, so it is limited to troubleshooting
purposes only.
NOTE
This connection method will output sound via the TV’s speakers. For optimal sound
quality, it is recommended that audio be transferred from the BDP-103D to an
A/V receiver with connected speakers.
If your A/V receiver does not accept audio via HDMI, or if your receiver does not have
HDMI inputs at all, see pages 16 and 17 for instructions on how to output audio to a
receiver using different connection types.
There are two HDMI output terminals (HDMI 1 OUT and HDMI 2 OUT) on the rear panel of BDP-103D,
both of which can be connected to your TV. We recommend using HDMI 1 OUT since it benefits from
the dedicated Darbee Visual Presence and Silicon Image VRS ClearView video processors.
I N S T A L L A T I O N
14
Connecting to Two TVs via HDMI
HDMI In
HDMI In
Rear Panel
HDMI Cables
TV 1
TV 2
We recommend that you connect your main TV (the one with larger screen size or the one that you
would watch more often) to HDMI 1 OUT in order to benefit from the dedicated video processor, and
set the Dual HDMI Output option in the Setup Menu to Dual Display to make sure that the HDMI 2
OUT can
also send out audio an
d video signals (see more details on page 53).
You may connect the DIAG (diagnostic) output to one of your TVs for troubleshooting purposes.
Refer to page 13 for more details.
TThe two HDMI outputs (HDMI 1 OUT and HDMI 2 OUT) available on the rear panel of BDP-103D
be connected to two TVs at the same time, and each output can deliver both digital video and
audio signals.
15
I N S T A L L A T I O N
Connecting to a TV via DVI
HDMI (from HDMI 1 or 2) - DVI Cable
Rear Panel
Audio Cable
DVI
Audio
DVI
If your TV has a DVI input that supports HDCP, you can purchase an HDMI-DVI cable to connect the
player to the TV. This connection method delivers digital video to the TV without any signal
degradation. We recommend that you use HDMI 1 OUT since it benefits from the dedicated video
processor.
Please use Red/White audio cables (not included) to connect the FL (Front Left) and FR (Front Right)
terminals of the player to the TV. Make sure the audio cables are connected to the
sam
e input
terminal group on the TV as the DVI input. Usually, the input terminals are marked as “DVI Audio” or
“PC Audio”. On some TVs you may need to use an RCA-3.5mm Mini-Jack adapter cable to connect
the audio.
You may connect the DIAG (diagnostic) output to one of your TVs for troubleshooting purpose. Refer
to page 13 for more details.
NOTE
HDCP stands for High-bandwidth Digital Content Protection. The HDMI outputs of the BDP-103D
use HDCP to encrypt the digital audio and video content. The TV must support HDCP in order to
decrypt and properly display the content.
I N S T A L L A T I O N
16
Alternate Audio Connections
Connecting to an A/V Receiver or Amplifier via Analogue Outputs
Audio Interconnect Cables
Rear Panel
AUDIO/VIDEO MULTI-CHANNEL
RECEIVER
Receiver/Amplifier with 7.1ch Audio Input
FRONT SURROUND SUBWOOFER S. BACK
L
R
L
R
L
R
CENTRE
Please use up to 8 RCA-style audio interconnect cables (not included) to connect the FL (Front Left),
FR (Front Right), SL (Surround Left), SR (Surround Right), C (Centre), SW (SubWoofer), SBL
(Surround Back Left) and SBR (Surround Back Right) analogue output terminals of the BDP-103D to
the corresponding multi-channel analogue audio input jacks of your A/V receiver or amplifier.
If the A/V receiver or amplifier only has 5.1ch audio inputs, do not connect the SBL (Surround Back
Left) and SBR (Surround Back Right) te
rminals, and
set the Down Mix option in the Setup Menu to
5.1 to make sure that any 7.1 channel signals are converted to 5.1 channels (refer to Down Mix Mode
on page 69).
If your audio system offers only stereo audio inputs, or if you would like to connect a dedicated stereo
audio system in addition to the surround audio system which is already connected to the HDMI or
S/PDIF outputs, you can connect the dedicated stereo audio system to the FL (Front Left) and FR
(Front Right) terminals of the player.
For the stereo outpu
ts,
if the audio system you are connecting to does not have surround speakers,
set the Down Mix option in the Setup Menu to Stereo. If the audio system has surround speakers
and Dolby Pro Logic or other surround audio decoding capabilities, set the down mix mode to “LT/RT”.
(For more information, refer to “Down Mix Mode” on page 69).
I N S T A L L A T I ON
17
Connecting to an A/V Receiver or Amplifier via S/PDIF (Coaxial / Optical)
Rear Panel
AUDIO/VIDEO MULTI-CHANNEL
RECEIVER
Receiver/Amplifier with Dolby Digital or DTS Decoder
Coaxial In
Optical In
Connect one of these cables:
Optical Digital Audio Cable
Coaxial Digital Audio Cable
Please use either a 75-Ohm coaxial digital audio cable with RCA-style connectors or an S/PDIF
optical digital audio cable to connect one of the digital audio outputs to the corresponding input
terminal on your A/V receiver. For detailed setup of coaxial/optical signals, refer to page 64.
NOTE
Due to bandwidth limitations, high resolution audio formats such as Dolby Digital Plus, Dolby
TrueHD, DTS-HD High Resolution and DTS-HD Master Audio cannot be sent through the
coaxial or optical digital audio output. A reduced resolution version of the same audio track
will be output instead. To listen to high resolution audio formats in their best quality, please
use the HDMI connection if you have a receiver that handles HDMI audio (see page 11) or
use the multi-channel analogue outputs if you do not (see page 16).
Due to copyright restrictions, SACD audio cannot be sent through the coaxial or optical
digital audio output. To listen to SACDs, please use the HDMI or analogue audio connections.
Due to copyright restrictions and bandwidth limitations, full resolution audio from DVD-Audio
discs cannot be sent through the coaxial or optical digital audio output. To listen to DVD-
Audio in full resolution, please use the HDMI or analogue audio connections.
I N S T A L L A T I O N
18
HDMI / MHL INPUT to BDP-103D
HDMI Cable
Front Panel Rear Panel
Audio/Video Source
HDMI Cable
or HDMI/MHL Cable
The BDP-103D provides two HDMI input ports, located on the front panel and the back panel separately,
both of which can accept up to 1080p high-definition video and digital audio. You can use the included
HDMI cable to connect a source device such as a digital TV box, mobile phone or camcorder to the
HDMI IN port(s). You can use the INPUT button on the OPPO remote to open the Input Source Menu,
which allows you to select the corresponding HDMI IN port.
Keep in mind that the HDMI IN port on the front panel is MHL (Mobile High-definition Link) compatible,
which means if it is connected to another MHL
-enabled device (like a smartphone) through a MHL
cable or adaptor (not included), then this port is not only capable of accepting high-resolution digital
signals, but can also simultaneously charge the connected device.
I N S T A L L A T I ON
19
Connecting to the Internet
The BDP-103D has significantly improved its internet streaming capabilities compared to its predecessors.
Currently, it supports Netflix and VUDU, as well as in-home network media sharing via My Network which
is capable of connecting with DLNA and SMB/CIFS clients. Additional online streaming applications may
also be added with future firmware updates.
The BDP-103D also supports the BD-Live feature offered on some Blu-ray Disc titles. BD-Live offers extra
downloadable content and additional online interactive programs. Content available o
n BD-Live varies by disc
and studio, and may include additional subtitles, commentaries, movie trailers, games, and online chat.
Connecting the player to the Internet will also allow the player to obtain firmware updates. (See pages 4 and 74
for more information regarding firmware updates.)
In order to utilize the BD-Live feature or to update the firmware via the Internet, the player needs to be
connected to a broadband Internet connection. It is not necessary to connect to the Internet if you do not inten
d
to use the network streaming, BD-Live or online firmware update features.
The BDP-103D provides two network connection methods: through Ethernet cable or through the external
wireless adaptor included with the player. For the fastest and most stable network connection, we recommend
using an Ethernet cable whenever possible.
Internet connection through Ethernet cable
Broadband Internet
Connection
WAN 1 2 LAN 3 4
Internet
Network Cable
(Ethernet)
Broadband Router/Modem
Rear Panel
Plug one end of a network cable (Category 5/5E straight Ethernet cable) into the LAN port on the
back of the BDP-103D.
Plug the other end of the network cable into a LAN port on the broadband router or modem.
After physically connecting the player to a broadband Internet connection, some network
configuration may be required. Refer to the Network Setup section on page 78 for details.
I N S T A L L A T I O N
20
Refer to the operating instructions supplied with the broadband router or modem, or contact the
Internet service provider for questions related to setting up the router or modem.
NOTE
Only connect the LAN port of the player to an Ethernet port that supports 10BASE-T or
100BASE-TX. Connecting to any other ports or jacks, such as a phone jack, can damage the
player.
Internet connection through wireless adaptor
Broadband Internet
Connection
Internet
Wireless Router/Access Point
Rear Panel
Internet 1 2 LAN 3 4
WiFi
Wireless Dongle
USB IN
The wireless adaptor included in the BDP-103D package has been pre-configured to work with your
player. It is compatible with 802.11B, G, and N (2.4GHz) wireless networks.
Make sure a broadband Internet connection is available and the Wi-Fi function on your wireless router
or access point has been turned on, and plug the adaptor into one of the three USB ports available on
your BDP-103D(one on the front panel, two on the back).
After connecting the adaptor, some network configuration is req
uired. Refer to the Network Setup
section on page 78 for details.
A USB extension cable is also included in the package. Connect it between the USB port on the player
and your wireless adaptor if needed.
Streaming services may require membership and may also be limited to service in the USA
only.
I N S T A L L A T I O N
21
Custom Installation
External IR (Infrared Remote) Installation
The BDP-103D features an IR IN port on its back panel. If the player is to be installed in an equipment cabinet
where direct line-of-sight is not available for the remote control, you can purchase an external IR Remote
Sensor and plug it into the IR IN port. Place the sensor head at a location where there is direct line-of-sight to
ensure reliable operation.
3.5mm Mono Cable
Rear Panel
External IR Remote Signal
IR IN Signal Identifications
Tip: IR carrier signal
Sleeve: Ground
3.5mm Mono Plug
NOTE
When an external IR sensor is plugged in, the original IR sensor window on the front panel
will be disabled.
The IR port on the BDP-103D is NOT compatible with the prior generation of external IR
Remote Sensor (IR-ES1) which is used on BDP-83.
OPPO cannot guarantee that the IR IN port will be compatible with devices that are not
manufactured by OPPO. Connecting the IR IN port to an incompatible device may result in
damage to the connected device or the player.
Please contact OPPO customer support if you plan to integrate the player into an IR
distribution system. Customer support can provide recommendations on how to properly
connect the control signals.
RS232 Control
The BDP-103D has an RS232 control port and can be integrated into most custom home theatre control systems.
Please ask your custom installer to contact OPPO for the RS232 control protocol, or check the OPPO Digital UK
web site (www.oppodigital.co.uk ) for the latest version of RS-232 protocol document.
Ltd
I N S T A L L A T I O N
22
Quick Start Guide
Power On and Play
The BDP-103D is pre-configured with settings that have been optimized for most home theatre systems, so it
can fit into your audio/video system without any additional adjustment. To begin, please follow these steps:
1. Connect the OPPO player into your system.
2. Turn on the TV and/or receiver/amplifier, and then turn on the player.
3. Switch the input selection on your TV or receiver so that the TV
displays the signal from the
player.
Within a few seconds, the player w
ill load the factory default settings and you will see the Home Menu with an
OPPO logo. The player is now ready for use. Enjoy your new OPPO Blu-ray Disc Player!
Please follow the rest of the user manual for information on basic and advanced operations.
Select the Best Output Resolution
One of the major advantages of the BDP-103D is its ability to play high-definition Blu-ray video and also up-
convert standard definition video stored on DVD discs to high definition. The sophisticated video processor
inside the player ensures that the video will have the best possible colour, detail and motion. The player offers
several standard and high definition video output resolutions. For best results, it is important to select an output
resolution that best matches your TV or display.
The rule of thumb when selecti
ng an output resolution is to match the “native resolution” of your TV or display
as closely as possible. The native resolutionis the resolution of the actual display component in the TV, such
as the Plasma panel, LCD panel, or DLP™ chip. The TV may accept input signals with lower
or higher
resolutions than its native resolution. In such cases, the electronics in the TV will upscale or downscale the
video to fit its display
component. Unfortunately, many TVs on the market only do an average job of scaling the
video. On the other hand, if you set the BDP-103D to output a resolution that matches or is very close to the
native resolution of the TV, you are more likely to get a great picture.
For most new displays on the market, the best output resolution will be 1080p. A few early model “1080p
displays did not accept a 1080p signal. For these display
s, the b
est output resolution is 1080i. For small screen
digital TVs this will likely be 720p. For even earlier CRT tube or rear projection TVs this will likely be 1080i. For
EDTV displays (very rare if they have HDMI or DVI) this will be 480p (NTSC) or 576p (PAL). These are general
recommendations that work for most users, but there can be exceptions. Advanced users may want to try all
supported resolutions and choose the one that provides the best result visually.
The BDP-103D supports a special Source Direct mode through its HDMI outputs. This resolution is
recommended for use with
external video processors or high-end TVs. In Source Direct mode, the player
works as atransport”. It decodes video from the discs and then sends the raw video signal in its native
resolution and format, without extra processing, to the external video processor or TV. The actual output
resolution varies by content:
noituloseR tuptuO tceriD ecruoS tnetnoC
i084 DVD CSTN
i675 DVD LAP
Most Blu-ray Movies (film-source) 1080p 23.976Hz or 1080p 24Hz
Most Blu-ray TV shows or Concerts
(video-source)
1080i
SACD and DVD-Audio 1080p
I N S T A L L A T I O N
23
For both HDMI outputs, the following output resolutions are available: 4Kx2K, Auto, 1080p, 1080i, 720p,
480p/576p, 480i/576i, and Source Direct. If Auto is selected, the player will determine the output resolution
based on the best signal resolution that the TV can display.
To change the output resolution, press the RESOLUTION button on the remote to bring the Resolution Menu,
then press the UP/DOWN ARROW buttons to highlight the
desired one, and press the ENTER button to
confirm and return. If your TV does not support the selected resolution,
you may see a black screen or an error
message. In this case, try a different resolution that your TV can support.
Determine the Display Aspect Ratio
Standard Definition, or 4:3 TV Wide screen, or 16:9 TV
The TV Aspect Ratio is the proportional ratio of a TV screen’s width and height. Older television sets generally
have a 4:3 aspect ratio the width is 4/3 (or 1.33) times the height. Newer wide screen television sets have a
16:9 aspect ratio the width is 16/9 (or 1.78) times the height. For best performance, the video output of your
player needs to match the screen aspect ratio of your TV. S
ince most Blu-ray discs and many DVD discs are
released in the wide screen format, it is highly recommended to use
a wide screen TV with the BDP-103D
The Aspect Ratio selections are 16:9 Wide and 16:9 Wide/Auto. Depending on your selection and the video
format recorded on the discs, image appearance on the TV screen can be one of the following:
Original Content
TV Screen Appearance
16:9
4:3
16:9
Wide Wide/Auto
If you have a widescreen (16:9) display, select one of these options:
16:9 Wide – 16:9 (widescreen) sources will be displayed in their native aspect ratio, and 4:3
sources will be horizontally stretched.
16:9 Wide/Auto – 16:9 (widescreen) as well as 4:3 sources will be displayed in their native aspect
ratio. Please note that in this mode, 4:3 sources will be displayed with black borders on both left
and right sides to maintain the correct 4:3 aspect ratio.
24
BASIC OPERATIONS
Disc Playback
NEPOREWOP
YALPPOTS
1 Press the POWER button to turn on the player.
2 Press the OPEN/CLOSE button to eject the disc tray.
3 Place the disc with the label side facing up and the recorded
side facing down.
4 Press the OPEN/CLOSE button again to retract the tray.
5 The player will read the disc information and begin playback.
6 Depending on the content of the disc, a menu or navigation
screen may appear. Use the navigation ARROW and SELECT
buttons to select the content to play.
7 To stop playback, press the STOP button.
8 To turn off the player, press the POWER button.
DVD-A
SACD
OPTION Menu
OPTION
1. During media file navigation and playback, press the OPTION
button on the remote to open the OPTION MENU, which allows
you to conveniently access various settings and playback
features.
2. When the OPTION MENU is displayed, press the LEFT/RIGHT
ARROW buttons on the remote to highlight a particular item, then
press the ENTER button to confirm.
The OPTION MENU selections may differ depending on content type. A summary of the selections and
their functionality is described as follows:
DVD-A
SACD
Within Disc Playback (CD, DVD, BD):
Disc info: Searches the Gracenote online database and display the available disc information (an
active internet connection is required).
Within Music File Playback:
Music info: As with “Disc info”; searches and displays available music information from Gracenote.
Add to playlist: Add the highlighted music file to the Playlist. This function is only available when
accessing external USB storage.
Goto playlist: Access the music files added to the Playlist.
Song Location: Return to the MUSIC interface and highlight the music file that is now playing.
Program Play: Play the audio tracks in a preferred sequence (only available in CD playback).
Repeat: Repeat the track or all tracks. See details on page 34.
Shuffle/Random: Activate Shuffle or Random mode. See details on page 35.
Gapless Play: Enable Gapless Playback mode. This is an experimental feature and only supports
APE and WAV files stored on external USB storage.
B A S I C O P E R A T I O N S
25
Within Photo File playback:
Zoom: Displays the image at different zoom levels.
Rotate – Left / Right / Mirror / Flip: Rotates the image on the screen.
Within HDMI INPUT playback:
3D: Enable 2D->3D conversion or bring the 3D adjustment menu. See details on page 54.
Fast Playback
You may fast forward or reverse during playback.
1. Pressing the FWD button on the remote control to start fast
forwarding playback. Each press of the FWD button increases
the playback speed in the following increments:
2. Pressing the
REV button on the remote control starts fast reverse playback. Each press of the REV
button reverses the playback speed in the following i
ncrements:
NOTE
Certain Blu-ray Discs utilizing BD-Java technology may have their own fast forwarding and
reversing control. The actual speed varies by disc, and a progress scale may be displayed by
the disc.
Pause and Frame-by-Frame
1. During playback, pressing the PAUSE button temporarily pauses
the program. In this mode, a PAUSE icon will appear on the TV
screen.
2. While a DVD or Blu-ray Disc is paused, pressing the PREV or
NEXT button reverses or advances the video frame-by-frame.
3. Pressing the PLAY button resumes normal playback.
DVD-A
SACD
DVD-A
SACD
1 2 3 4 5
Within Video Discs (DVD, BD) and Video File Playback:
3D: Enable 2D->3D conversion or bring the 3D adjustment menu. See details on page 54.
Zoom: Opens the image zoom level menu. See details on page 32.
Angle: Changes the viewing angle. This function is only available when the DVD/BD is recorded
with multiple angles.
Subtitle Adjustment: Set the subtitle display options.
Colour : Set subtitle text colour (only available on external subtitle files).
Outline colour: Set the outline colour for subtitle text (only available on external subtitle files).
Size: Set subtitle text size (only available on external subtitle file).
Position: Set subtitle display position.
Defaults: Reset all subtitle options to their default values.
o
o
o
o
o
REV FWD
DARBEE
3D: Enable 2D->3D conversion or open the 3D adjustment menu. See details on page 54.
PREV
NEXT
YALP ESUAP
B A S I C O P E R A T I O N S
26
Slow Playback
To play the video in slow-motion, follow these steps:
1. Press the PAUSE button on the remote control to pause
playback.
2. Press the FWD button to select a forward slow playback speed.
Each press of the FWD button increases the playback speed in
the following increments:
1/16 1/8
1/41/2
3. Press the REV button to select a reverse slow playback speed. Each press of the REV button
reverses the playback speed in the following increments:
1/16 1/8
1/41/2
4. To exit the slow playback mode, press the PLAY button.
NOTE
Certain Blu-ray Discs utilizing BD-Java technology may not support slow playback.
Blu-ray Disc Menu Playback
TOP
MENU
POP-UP
MENU
ENTER
ARROW
BUTTONS
COLOUR
BUTTONS
1. Blu-ray Discs usually contain a Top Menu and a Pop-up
Menu. The Top Menu normally appears at the beginning of
playback, after the previews and copyright messages. The
Pop-up Menu can be accessed during the movie without
interrupting playback.
2. During playback, press the POP-UP MENU button to
access the Pop-up Menu. Press the TOP MENU button to
access the Top Menu.
3. Navigate the menu using the ARROW buttons, and then
press the ENTER button to
make a selection.
4. Some menus make use of the COLOUR buttons. You c
an
select menu functions by pressing the corresponding
COLOUR button on the remote control.
DVD Menu Playback
TOP
MENU
(TITLE)
POP-UP
MENU
(MENU)
ENTER
RETURN
ARROW
BUTTONS
1. Some DVDs contain title menu or chapter menu functions.
2. During playback, press the TOP MENU button to return to
the disc title menu. Press the POP-UP MENU button to
display the chapter menu. Depending on the disc, one or
both menus may not exist.
3. Navigate the menu using the ARROW buttons, and then
press the ENTER button to make the selection.
4. Press the RETURN button to return to the previous menu.
The return location varies by disc.
DVD-A
PLAY
PAUSE
REV
FWD
B A S I C O P E R A T I O N S
27
On-Screen Display
1. During the playback of a DVD or Blu-ray Disc, press the
INFO button on the remote control to show its status
information. For CDs and SACDs, the status information is
shown automatically.
2. When the status information is shown, press the PAGE
UP/DOWN buttons to scroll through several different display
formats. The playback time information displayed on the
front panel changes together with the on-screen display.
3. Press the INFO button again to hide the on-screen display.
The playback time info
rmation display on the front panel
will
remain in the selected format.
The following display formats are available:
DVD and Blu-ray Disc:
- Title elapsed time
- Chapter elapsed time
- Title remaining time - Chapter remaining time
CD and SACD:
- Track elapsed time - Disc elapsed time
- Track remaining time - Disc remaining time
In addition to the playback time, the on-screen display may also contain the following information about
the content currently playing:
Playback status: an icon indicating play, pause, and fast forward/reverse status.
Bit rate meter: an indication of the bit rate of the audio and video stream.
Current and total title numbers. (DVD and Blu-ray Discs)
Current and total chapter numbers of the current title. (DVD and Blu-ray Discs)
Current and total
tracks. (CDs and SACDs)
Aud
io information: current and total available number of audio tracks, language, format, and
channels.
Subtitle information: current and total available number of subtitle tracks and language.
Video format information: encoding type, frame rate and original aspect ratio.
Volume Control
VOL -
VOL +
1. On the BDP-103D, the volume control only affects the analogue
audio output. It does not apply to digital audio output (HDMI,
Coaxial and Optical) either in bitstream format or in
LPCM
format.
2. The VOL +/- buttons on the player remote control are
provided as an alternative way of controlling the audio
volume. It is recommended that you use this control to make
the audio volume from the player the same as from other
sources, such as TV programs or a VCR.
Press the VOL – button to decrease the vol
ume.
Press the VOL + button to increase the volume.
DVD-A
SACD
DVD-A
SACD
HDMI output information: connection status, video resolution, frame rate, colour space, audio
format and channels.
B A S I C O P E R A T I O N S
28
Mute
MUTE
1. Press the MUTE button on the remote control during
content playback to turn off audio output. The TV screen
displays a mute icon. The front panel MUTE indicator will
also light up.
2. Press the MUTE button again to resume audio output.
NOTE
Check the MUTE status on the front panel display of the player when there is no audio output. You
may also press the MUTE button to verify the MUTE status.
1. To select the audio language or track, press the AUDIO button on
the remote control during playback.
2. Repeat pressing the AUDIO button or use the UP/DOWN
ARROW buttons to choose from all available language or audio
tracks.
NOTE
Availability of languages and audio channels varies by disc. Some DVD-Audio discs allow audio
track selection with the AUDIO button, while others require the user to choose from the audio setup
menu of the disc. When playing an SACD with both multi-channel and stereo contents, the AUDIO
button can be used to switch between the two formats.
DVD-A
SACD
DVD-A
SACD
Audio Language/Track Selection
Subtitle Selection
1. When playing a DVD, Blu-ray Disc or other video programs
recorded with subtitles, press the SUBTITLE button on the
remote control to select the desired subtitle.
2. Repeatedly press the SUBTITLE button or use the UP/DOWN
ARROW buttons to choose from all available subtitles.
3. To turn off subtitles, select Off from the list.
AUDIO
DARBEE
SUBTITLE
DARBEE
B A S I C O P ERA T IONS
29
HDMI / MHL INPUT Selection
1. When sending external media sources to the BDP-103D
through the front and back HDMI IN ports, press the INPUT
button on the remote to bring the “Input Sourcemenu.
2. Use the UP/DOWN ARROW buttons to choose the required
HDMI input port.
3. You can always select the BLU-RAY PLAYER to return to
OPPO HOME menu.
NOTE
The front HDMI IN port is MHL (Mobile High-definition Link) compatible. Please refer to page 18
for more details. A dedicated MHL cable or adapter is required (not included) and some
configuration may be required on the mobile device.
Audio Return Channel (ARC) Selection
1. When sending a digital audio signal from the TV back to the
BDP-103D through an HDMI connection, press the INPUT
button on the remote to bring the Input Source menu.
2. Use the UP/DOWN ARROW buttons to choose the required
ARC channel.
3. You can always select BLU-RAY PLAYER to return to OPPO
HOME menu.
NOTE
Audio Return Channel (ARC) is a feature introduced in HDMI v1.4, which allows you to send
digital audio signals from the television back to the player or receiver. Instead of listening
through TV speakers, ARC allows the sound to be processed and produced by the home
theatre audio system.
A HDMI 1.4 cable is required (included) and you need to make sure the HDMI input port on
the TV is ARC capable. Usually, ARC has to be enabled in the TV’s settings.
B A SIC O PER A T I ONS
30
BD-Live
Some Blu-ray Disc titles are released with the BD-Live feature. BD-Live offers extra
downloadable content and additional online interactive programs. BD-Live content varies by
disc and studio, and may include additional subtitles, commentaries, preview trailers, games,
and online chat. A Broadband internet connection is required to enjoy BD-Live content (see page 19).
Depending on how the studios organize their BD-Live content, some Blu-ray Discs may start downloading BD-
Live content when playback starts, have a BD-Live selection on the m
ain menu, show a prompt asking whether
you would like to start downloading, or ask you to sign up for a membership or account. Please follow the
instructions that come with the disc to enjoy BD-Live contents.
Your Internet connection speed and the capacity of the BD-Live content servers can all affect how fast BD-Live
content is downloaded. If you encounter slow downloading or intermittent playback, please play the disc without
accessing the BD-Live features, or try again at a different time.
When you use the
BD-Live feature, the player or disc ID and your IP (Internet Protocol) address may be sent to
the content provider via the Internet. Generally, no personally identifiable information is sent. However
technologies exist to match your IP address to a certain geographical area or service provider. Your Internet
service provider also has the knowledge of who is using a particular IP address. If the BD-Live content provider
requires you to log in using a membership or account, the content provider will have access to your
membership or account information. Check with your I
nternet service provider and the BD-Live content
providers for their privacy policy.
You can choose to restrict BD-Live Network Access in the Setup Menu (details on page 78).
31
ADVANCED OPERATIONS
Output Resolution
If you would like to change the output resolution, you may do so by
pressing the RESOLUTION button on the remote.
1. Make sure the HDMI cable is properly connected.
2. Turn on the TV and adjust the TV to use its HDMI input port.
3. Make sure that the player is turned on. Although the ou
tput resolution can be changed while a disc is
playing, it is recommended that you stop playback and take out the disc before changing the ou
tput
resolution. Press the RESOLUTION button. The Resolution Menu appears on the TV screen. If the
TV does not support the current resolution and you cannot see the Resolution Menu, the current
resolution is also displayed on the player’s front panel.
4. Use the UP/DOWN ARROW buttons to select the new output resolution. You may also press the
RESOLUTION button multiple times to c
ycle through the available output resolutions.
5. Press the ENTER button to apply the selected output resolution. If you do
not want to change the
output resolution, press the RETURN button to exit and return.
The following output resolutions are available:
NTSC output:
4Kx2K
Auto 1080p(60Hz/24Hz) 1080i 60Hz 720p 60Hz 480p 480i Source Direct
PAL output:
4Kx2K
Auto 1080p(50Hz/24Hz) 1080i 50Hz 720p 50Hz 576p 576i Source Direct
NOTE
Some TV sets may not support one or more output resolutions. If an incompatible output
resolution is selected, you will get a blank screen or an error message. If this occurs, please
select an output resolution that is supported by the TV.
If you cannot get a picture using HDMI, please remove the HDMI cable and connect the
player’s DIAG (diagnostic) output to the TV using a regular composite video cable, and then
use the Setup Menu to adjust the player settings.
and sold going forward will not be able to pass high definition video (720p, 1080i, or 1080p)
via Component Video outputs. Because of this, we have removed the Component and
The BDP-103D supports multiple output resolutions. For a
detailed discussion on how to choose the best output resolution,
please refer to the Select the Best Output Resolution section
on page 22 of this manual.
Due to the “Analogue Sunset” provision, as of January 1, 2011 all Blu-ray Disc players made
RESOLUTION
DARBEE
ADVANCE D O P E RAT I ONS
32
Composite video outputs on the BDP-103D, and only kept a standard definition DIAG video
output for troubleshooting purposes.
Zooming and Aspect Ratio Control
This feature zooms in and out of the displayed frame and also
changes the aspect ratio (image width vs. height).
To change the zoom level, press the ZOOM button on the remote
control. Each press of the ZOOM button will switch the zoom level in
sequence.
Zoom Levels for HDMI Output
The available zoom levels depend on the TV Aspect Ratio setting in the Setup Menu and the encoded
aspect ratio on the BD/DVD Disc:
1:1 (No zoom), Stretch/Compress, Full Screen, Under Scan, 1.2X, 1.3X, 1.5X, 2X, 1/2X
The zoom level is reset to 1:1 when the disc is ejected, or when the player is turned off.
The following zoom levels may be useful for specific applications:
1) Playing 16:9 BD or DVD when TV Aspect Ratio is set to 16:9 Wide or 16:9 Wide/Auto
StretchThe image is vertically stretched 1.33 times. For movies with 2.35:1 aspect ratio, this zoom
level cuts off the black borders at the top and bottom of the image. Users of a projector with an
anamorphic lens may find this mode helpful.
Original 2.35:1
Widescreen Movie
“Stretch” Zo
om Projected through
an Anamorphic Lens
Full Screen – The image is stretched by 1.33 times for both vertical and horizontal directions. For
movies with 2.35:1 aspect ratio, this zoom level cuts off the black borders at the top and bottom of the
image while maintaining the correct aspect ratio. The left/right sides of the image are slightly cropped.
Original 2.35:1 Widescreen Movie “Full Screen” Zoom
ZOOM
DARBEE
ADV A N C E D O P E R A T I ONS
33
2) Playing 4:3 BD or DVD when TV Aspect Ratio is set to 16:9 Wide
1:1 – The image fills up the entire 16:9 screen but is horizontally stretched. Figures may look shorter
and wider than they should be.
Compress – The player maintains the correct 4:3 aspect ratio and adds borders to the left and right
sides of the image.
Full ScreenThis zoom level maintains the correct aspect ratio but crops the top and bottom slightly
in order to fit the 4:3 image to the 16:9 screen.
mooZ neercS lluF mooZ sserpmoC 1:1
3) Playing 4:3 BD or DVD when TV Aspect Ratio is set to 16:9 Wide/Auto
1:1 – The player maintains the correct 4:3 aspect ratio and adds borders to the left and right sides of
the image.
Stretch – The image is horizontally stretched 1.33 times. This zoom level fills up the 16:9 screen, but
figures may look shorter and wider than they should be.
Full ScreenThis zoom level maintains the correct aspect ratio but crops the top and bottom slightly
in order to fit the 4:3 image to the 16:9 screen.
mooZ neercS lluF mooZ hctertS 1:1
The “Under Scan” zoom level shrinks the image by 5%. This zoom level may be used to compensate for
TVs that over scan, so the viewer can see the entire image area with no cropping. All other zoom levels
are indicated by their respective zoom ratio.
NOTE
Some early DVD titles (released from 1997 until early 2000’s) use a 4:3 non-anamorphic
widescreen aspect ratio. When played on a 16:9 display, the content is shown in a small window
with black borders on all four sides. The top and bottom borders are encoded into the video. The
left and right borders are added by the player to maintain the correct aspect ratio. For these types
of discs, the Full Screen zoom mode can be used to eliminate the borders.
The ZOOM feature may not be available when certain DVD or Blu-ray Discs are played if the
disc’s author has chosen to disable ZOOM.
ADVANCE D O P E RAT I ONS
34
Subtitle Shift
For customers using a 2.35:1 “Constant Image Height” video
projection system, subtitles may get cut off because they are
positioned outside of the active video area.
The Subtitle Shift feature can be used to shift subtitles up or down so
they are displayed within the active video area.
To shift the display position of subtitles, please follow these steps:
1. When playing a DVD, Blu-ray Disc or other video programs recorded with subtitles, select the desired
subtitle from the disc menu or by using the
remote. (Refer to page 28 for more information.)
2. Press and hold the SUBTITLE button on the remote control until the Shift Subtitle Position prompt
appears on the screen.
3. Wait until subtitle text is shown on the screen, and then use the UP/DOWN ARROW buttons to move
the subtitle text to the desired position.
4. Press the ENTER button to set the subtitle display position.
Once the Subtitle Shift position is set, it is saved by the player in the Video Setup > Display Options >
Subtitle Shift setup menu option. The setting will be applied to subtitles of all future DVD and Blu
-ray
Di
scs. You can also change the setup menu item directly. Refer to the Video Setup section beginning on
page 53 for more information.
Repeat Playback
To repeat a certain chapter, title, track or disc, press the REPEAT button
on the remote control.
Each press of the REPEAT button changes the repeat mode using the
following sequence:
DVD and DVD-Audio:
Repeat Chapter Repeat Title Repeat OffRepeat All
Blu-ray Disc:
Repeat Chapter Repeat Title Repeat Off
CD and SACD:
Repeat One Repeat All Repeat Off
NOTE
Certain Blu-ray Discs may prohibit repeat operations.
DVD-A
SACD
SUBTITLE
DARBEE
REPEAT
DARBEE
ADV A N C E D O P E R A T I ONS
35
Repeat a Selected Section
To repeatedly play a specific section, please follow these steps:
1. During normal playback, press the AB REPLAY button on
the remote at the desired beginning point (Point A) for the
repeat play. The TV screen displays “A-”.
2. When playback reaches the desired ending point (Point B)
for the repeat play, press the AB REPLAY button again.
The player now repeatedly plays back the specified section
(A-B). The TV screen displays “A-B”.
3. Press the AB REPLAY button for the third time to resume normal playback.
NOTE
Not available for all disc formats or content. Certain Blu-ray Discs may prohibit repeat operations.
Shuffle and Random Playback
BLUE
When playing a CD or SACD, press the BLUE button on the remote
control to activate the Shuffle and Random modes. Each press of the
BLUE button switches the playback mode in the following sequence:
Shuffle Random Normal
In normal playback mode, each track is played back in sequential order. As the name implies, the
Random playback mode randomly selects a track to play. The Shuffle mode also plays back the tracks
in random order, but it ensures that each track is played only once.
Selecting the Shuffle or Random mode cancels any Repeat mode you may be using. Similarly,
selecting a Repeat mode cancels any Shuffle or Random mode.
Playback by Chapter or Track Number
NUMBER
BUTTONS
During the playback of a disc, you can use the NUMBER buttons on
the remote control to directly jump to a specified chapter or track
number. For example:
To select the seventh track, press the [7] button.
To select the 16
th
track, press [1] followed by [6] in quick
succession:
+
NOTE
Certain DVD-Audio and Blu-ray Discs may not allow for direct chapter selection.
DVD-A
SACD
SACD
DVD-A
SACD
AB REPLAY
DARBEE
ADVANCE D O PERAT I ONS
36
Playback from a Specific Location
DVD and Blu-ray Discs
During the playback of a DVD or Blu-ray Disc, you may specify a
location to start playback by entering the title, chapter or time
directly. Press the GOTO button to bring up the on-screen display.
1 / 7 5 / 25 00:22:14 00:40:06
On top of the video screen, the on-screen display information has
the following components (from left to right): Playing Status, Title,
Chapter, Time Counter, Progress Indicator, and Total Time. After
pressing the GOTO button for the first time, the cursor will be
positioned at the Time Counter. This is the Time Search mode.
Each subsequent press of the GOTO button will switch the search
mode in the following sequence:
(Title or Chapter) Time Search Chapter Search
Title Search
On-Screen Display
1. Title time search. Searches for a specific time within the currently playing title.
Press the GOTO button to bring up the on-screen display. The cursor will be positioned at the
Time Counter. Use the NUMBER or ARROW buttons to enter the hours, minutes and seconds for
your specific search and press the ENTER button.
1 / 7 5 / 25 00:22:14 00:40:06
2. Chapter time search. Searches for a specific time within the currently playing chapter.
Press the INFO button to bring up the on-screen display. Use the PAGE UP or PAGE DOWN
button to switch the display to Chapter Time mode (note the icon placed on the left of the Time
Counter changes from the Title icon to the Chapter icon). Press the GOTO button to position the
cursor at the Time Counter, then use the NUMBER or ARROW buttons to enter the hours,
minutes and seconds for your specified search and press the
ENTER button.
1 / 7 5 / 25 00:06:48 00:08:33
3. Chapter search. Allows you to search for a particular chapter.
Repeatedly press the GOTO button until the cursor is positioned at the Chapter location. Use the
NUMBER or ARROW buttons to enter or select the chapter number and press the ENTER button.
1 / 7 5 / 25 00:22:14 00:40:06
4. Title search. Allows you to search for a particular title.
Repeatedly press the GOTO button until the cursor is positioned at the Title location. Use the
NUMBER or ARROW buttons to enter or select the title number and press the ENTER button.
DVD-A
SACD
1 / 7 5 / 25 00:22:14 00:40:06
ADV A N C E D O P E R A T I ONS
37
NOTE
Some discs may prohibit the search operation. You will not be able to select a search location,
or you may get an “invalid operation” icon after specifying a search location.
Some Blu-ray Discs feature their own search function. Follow the on-screen instructions to use
the search function provided by such discs.
CD and SACD Discs
You may specify a point to start playback by entering the disc elapsed time, track elapsed time or track
number directly. When playing CDs and SACDs, the on-screen display automatically shows on the TV
screen:
1 / 8 00:08:16 00:12:33
The on-screen display has the following components (from left to right): Playing Status, Track Number,
Time Counter, Progress Indicator, and Total Time.
To specify a playback location using one of the following search modes, press the GOTO button. Each
press of the GOTO button switches the search mode in the following sequence:
(Track or Disc)Time Search Track Search
On-screen Display
1. Track time search. Searches for a specific time within the currently playing track.
Press the GOTO button to place the cursor on the track Time Counter. Use the NUMBER or
ARROW buttons to enter the hours, minutes and seconds for your specified search and press the
ENTER button.
33:21:008 / 1 00:08:16
2. Disc time search. Navigates you to a particular timestamp.
While the on-screen display is shown, press the PAGE UP or PAGE DOWN button to switch the
Time Counter to Disc Time mode. Press the GOTO button to place the cursor at the Disc Time
Counter. Use the NUMBER or ARROW buttons to enter the hours, minutes and seconds for your
specified search and press the ENTER button.
33:20:108 / 5 00:40:46
3. Select a track. To navigate to a particular track:
Repeatedly press the GOTO button until the cursor is placed on the Track Number position. Use
the NUMBER or ARROW buttons to enter or select the track number and press the ENTER button.
00:12:3300:08:161 / 8
ADVANCE D O P E RAT I ONS
38
Memory and Automatic Resume
POWER
OPEN
YALPPOTS
1. The player automatically saves the current position when playback
is interrupted. Operations such as OPEN, and POWER cause the
player to save the current playing position.
2. This position is saved even after turning off the unit or changing
the disc.
3. The next time a disc with a saved playing position is inserted, the
player will resume playback from that point. If you wish to cancel
the automatic resume and start playback from the beginning, you
must press the STOP button when prompted.
4. The pl
ayer can save the playback position for up to 5 discs. When
the position from the sixth disc is saved, the oldest saved position
is replaced.
NOTE
Some Blu-ray Discs do not support resuming and will always play from the beginning.
Viewing Pictures on DVD-Audio Discs
PAGE
UP/DOWN
Some DVD-Audio discs contain static pictures, such as photos of the
band as well as album narration. When a DVD-Audio track is playing,
you may use the PAGE UP button to select the previous picture or the
PAGE DOWN button to select the next picture.
NOTE
Availability of static pictures depends on the DVD-Audio disc.
Pure Audio Mode
You can enjoy higher quality audio by turning off the video processing and
output. The Pure Audio mode reduces any potential interference between
the video and audio signals.
1. Press the PURE AUDIO button on the remote control to turn off
video and enter Pure Audio mode. Video output will cease, the
power light will dim and the front panel displays will turn off.
2. Press the PURE AUDIO button again to resume video and
cancel Pure Audio mode.
DVD-A
SACD
DVD-A
DVD-A
SACD
ADV A N C E D O P E R A T I ONS
39
NOTE
Pure Audio mode is automatically canceled when the unit is switched off or when playback is
stopped.
Because HDMI carries audio together with video, the HDMI video signal cannot be completely
turned off. A black screen is transmitted instead to minimize any potential interference.
40
MEDIA FILE PLAYBACK
In addition to playing standard disc-based formats such as Blu-ray, DVD, CD and SACD, the BDP-103D
can play media files. You can enjoy digital music, movies and photos stored on a data disc (recordable
CD, DVD or Blu-ray) or an external USB drive. Due to the variation of media, encoding software and
techniques used, compatibility cannot be guaranteed for all user-created or downloaded content.
Support for such content is on a best effort basis.
Playback from USB Flash Drive
USB
Device
USB
Device
The BDP-103D is equipped with three USB ports: one on the front panel and two on the back. You may use
any of the available USB ports to plug in a USB drive.
The USB ports are rated to provide a maximum of 5V, 1000mA power to the USB drive. It is sufficient for USB
thumb drives and flash memory card readers, but may not be sufficient for USB hard disks. It is recommended
to check with your drive manufacturer for power requirements, or use an external power supply.
NOTE
This unit supports USB Mass Storage Class Bulk-Only Transport” devices only. Most USB
thumbs drives, portable hard disk drives and card readers conform to this device class. Other
USB devices such as MP3 players, digital cameras, and mobile phones may not be compatible.
Supported USB drives can be formatted with the FAT (File Allocation Table), FAT32 or NTFS
(New Technology File System) file system.
In some cases, an incompatible USB device may cause the player to stop responding. If this
occurs, simply turn off the power, remove the USB device, and turn the player back on.
To improve the user experience when navigating media files, the player may cache some of the
media information on the USB drive (details on page 76). To prevent the player from writing
anything to the USB drive, turn off the“Cache Media Info” option in the Setup Menu. However,
we recommend keeping this setting enabled and not deleting the cached media data.
M E D I A F I L E P LAY BACK
41
In-home Network Media Sharing
(Network Attached Storage) and install and configure software which is functionally equivalent to DLNA or
SMB/CIFS (a network file sharing protocol) client. Set the My Network selection to On in the Setup Menu
(details on page 78), press the HOME button on the remote to bring the Home Menu, select the Network
icon and press ENTER button to show the list of available servers. In some case, you might need to
disable the firewall on the hardware to allow BDP-103D to see the server.
The BDP-103D player can perform network s
haring in one of the following three ways:
As a digital media player (DMP): the player can actively search, access and pull content from
local media servers which is functionally equivalent to DLNA.
As a digital media renderer (DMR): the player plays content received (“pushed”) from a digital
media controller (DMC). A DMC-capable media server is required. Refer to the server’s
respective user instructions for correct configuration and operation.
Accessing a SMB/CIFS client: the player can directly access files shared through SMB/CIFS
clients ove
r the network, as if accessing an external USB hard drive. Most computers, especially
those installed with Windows, already have an SMB client embedded. Please refer to respective
OS instructions to set up the SMB/CIFS shared file/folder.
NOTE
NAS is a networked appliance that provides file-based data storage services to other devices
on the network. Commercial products are available on the market.
SMB (Server Message Block) or CIFS (Common Internet File System) is mostly known as
Microsoft Windows Network. It does not require an extra media server or perform any media
format transcoding, which reduces the processing load and keeps the original content quality.
Compatibility with local network sharing hardware/software is on a best effort basis with no
guarantee, due to variations in NAS devices, media servers and their configurations.
The BDP-103D can remotely play back music, photo, and video files stored on media devices that are
connected to the same home network. You will need to prepare hardware such as a computer or NAS
M E D I A F I L E P L A Y B A C K
42
Internet Streaming on HOME Menu
The BDP-103D presents a Home Menu to assist you in navigating and playing media files from an inserted
optical disc, USB flash drive, external hard drive, home network sharing and internet streaming. Basically, the
Home Menu is the starting point for accessing media files.
You can bring up the Home Menu with the HOME button on the remote control. Currently there a
re
seventeen
selections:
Disc enables the player to start playback of an inserted optical disc.
Music, Movie
and Photo allow you to access corresponding type of media files from a
connected USB drive and inserted data disc.
Network enables the player to stream audio, video and photos from media servers on the home
network. Capable hardware and software may be required.
Setup brings the player’s Setup Menu, just like
pressing the SETUP button on the remote.
Netflix connects you to your Netflix account and provides online movie streaming capabilities.
VUDU connects you to your VUDU HD Movies account and provides o
nline movie and TV Show
rental, purchasing and streaming capabilities. (This service is only available in the USA)
CinemaNow connects you to your CinemaNow account and provides online movie and TV episode
rental, purchasing and streaming capabilities. (This service is only available in the USA)
HOME
HOME
YouTube provides an uninterrupted stream of HD videos from YouTube as though you were
watching a normal television channel.
Pandora connects you to your Pandora account and provides personalized internet radio
services. (This service is only available in the USA)
Picasa connects you to your Picasa account and provides online photo viewing and sharing
capabilities.
Rhapsody connects you to your Rhapsody account and provides personalized internet music
services. (This service is only available in the USA)
BBC iPlayer provides internet television and radio services developed by the BBC (currently
only available in the United Kingdom).
Berliner Philharmoniker connects you to the Digital Concert Hall service. Watch and listen to
classical music's finest conductors and soloists performing with the Berliner Philharmoniker-live
as it happens or on-demand as it suits you.
Photo Network SetupMovie
CinemaNowPicasa
PandoraBBC SPORT
BD Music
M E D I A F I L E P L A Y B A C K
43
NOTE
The Network feature is not officially supported due to the variation in hardware and
software configurations. OPPO does not offer technical support via email or phone for this
feature. The OPPO Wiki located at wiki.oppodigital.com
can be a useful resource to learn
about this feature.
Playing Music Files
To play digital music files stored on an optical
disc or USB drive, select Music from the Home
Menu. A file browser will appear to assist you in
navigating the files and folders.
The first step is to select the Data Disc or USB
device that contains the music files. The player
will take a moment to read the media and list the
folders and music files.
In the music browser, you can perform the
following operations:
Press the UP/DOWN ARROW or PAGE
UP/DOWN buttons to move the cursor and
select music files.
Press the OPTION button to gain access
to features such as music information.
Details can be found on page
24.
Different internet streaming applications may have different function mappings on the
BDP-103D remote control. To exit Netflix, YouTube, Rhapsody and BBC iPlayer press
HOME button. To exit VUDU, Berliner Philharmoniker or Picasa, either press HOME
button or repeatedly press RETURN button until the Home Menu appears. To exit
press HOME button or select Exit Pandora in Pandora’s Menu
selection. To exit CinemaNow, either press HOME button or select Exit in CinemaNow’s
Menu selection. Please contact OPPO customer support if you need assistance.
Pandora, either
M E D I A F I L E P L AYBA C K
44
Press the TOP MENU button to move the cursor to the category menu in the top of the screen. This
menu contains the following choices:
o Source – Allows you to switch between different connected storage devices.
o View – Allow
s you to switch between List View and Folder View modes.
o SortLists music files/folders by different categories, such as Song name, Artist, Album and
Genre.
When a music file is highlighted by the cursor, press the ENTER or PLAY button to start play
back.
NOTE
When a data disc or USB drive is inserted, the player automatically starts to index files and
build a database in the background. Depending on the number and size of files, this process
could take up to several minutes. Customers can only access the Category list (Artist, Album
and Genre) when the database has been built, otherwise, a warning message will appear.
If a music file starts playing and there is no other user operation, the Now Playing screen will appear
after a few seconds. You can also get to this screen by pressing the OPTION button and then selecting
Now Playing. This screen provides the following information:
Shows playback status: Play,
Display and change playback mode: Shuffle/Random, Repeat One/All.
Music information: Displays information like album art and tags, either embedded in the original
file or found online from the
Grace
note database.
The following operations are available while
the Now Playing screen is shown:
Normal playback control: PLAY, STOP,
PAUSE, PREV/NEXT, REV, and FWD
Special playback modes: REPEAT and
Shuffle/Random (BLUE colour button)
Press the OPTION button to access the
Option menu. (More details on page 24)
Return to the Browser without stopping
the music: RETURN
Stop playback and return to the
Browser: Press STOP
Pause, Track and Time.
M E D I A F I L E P LAY BACK
45
Playing Movie Files
To play movie files stored on an optical disc or USB
drive, select Movie from the Home Menu. A file
browser will appear to assist you in navigating through
the files and folders.
The first step is to select the Data Disc or USB device
that contains the movie files. The player will take a
moment to read the media and list the folders and
movie files.
In the movie browser, you can perform the following
operations:
Press the UP/DOWN ARROW or PAGE
UP/DOWN buttons to move the cursor and
select movie files.
Press the OPTION button to access
features like video information. Details can
be found on page 24.
Press the TOP MENU button to move the
cursor to the category menu in the top of
the screen. This menu functions the same
as the one discussed in Playing Music
Files on page 43.
When a movie file is highlighted by the cursor, press
the ENTER or PLAY buttons to start
playback.
On
ce a movie file starts playing, the normal playback control functions are available:
To stop the movie and return to the file browser, press the STOP button. You can also press
the HOME button at any time to stop the playback and return to the Home Menu.
Press the OPTION button to access features such as Video Information, Subtitle Adjustment,
3D settings and Picture Zooming
and Angle. Details can be found on page 25.
M E D I A F I L E P L AYBA C K
46
Viewing Photo Files
To view digital photo files stored on an optical
disc or USB drive, select Photo from the Home
Menu. A file browser will appear to assist you in
navigate the files and folders.
The first step is to select the Data Disc or USB
device that contains the photo files. The player
will take a moment to read the media and list
the folders and photo files.
In the photo browser, you can perform the
following operations:
When a photo file is highlighted by the cursor, press the ENTER or PLAY button to play back
the photos as a full screen slideshow.
The following operations are available during the photo slideshow:
Display the help
screen: INFO
Normal playback controls: PLAY, STOP, PAUSE, and PREV/NEXT
Adjust slideshow speed: REV and FWD
Zoom: ZOOM. Once zoomed in, the ARROW buttons can be used to p
an around the photo.
Reflect (flips the photo horizontally to make it upside-down): UP ARROW
Mirror (flips the photo vertically to make it a mirror image): DOWN ARROW
Rotate left (counterclockwise): LEFT ARROW
Rotate right (clockwise): RIGHT ARROW
Repeat: REPEAT
Show EXIF information: GREEN
Play in random sequence: BLUE
Change slideshow transition effect: YELLOW
Press the OPTION button to access to features like Image Zooming and Image Rotation.
Details can be found on page 24.
colour button.
colour button.
col
our button.
Press the UP/DOWN ARROW or PAGE
UP/DOWN buttons to move the cursor and
select photo files.
Press the TOP MENU button to move the
cursor to the category menu in the top of
the screen.
Switch between view modes: Red colour button
M E D I A F I L E P LAY BACK
47
Adding Background Music
You can also add background music to the photo slideshow. To do so, you will need to prepare digital music
files. The music files can be stored on the same disk as the photos, or on a different USB drive. Start music
playback first by selecting Music from the Home Menu. Once the music is playing, press the HOME button to
get back to the Home Menu, and start the photo slideshow by selecting Photo in the usual manner.
48
SETUP MENU OPTIONS
Using the Setup Menu System
Like many other sections listed in this guide, the players Setup Menu allows you to make adjustments to
match your specific audio/video configuration. When performing menu adjustments, we will use the following
terminology to indicate the location of the desired function:
Setup Menu Section > Menu Item > Selection
Menu Item is the parameter to be adjusted which appears in the centre col
umn of the Setup Menu. Once you
enter a Setup Men
u Section, the list of Menu Items and their current value are displayed in a box.
Selection is the actual numeric or descriptive element that represents the change being made to the selected
parameter. It is the item located to the right of its corresponding Menu Item.
A Scroll Mark appears at the top or bottom of the menu when there are more Menu Items or Se
lections than
what can fit in a screen. You may use the UP and DOWN AR
ROW buttons to scroll the display in order to
access additional items.
The preceding diagram should give a good description of the various elements and their context. In this screen
we could, for example, instruct you to set the Auto Play Mode parameter to Off in the Playback Setup section.
To indicate where we were, you would see the following: Playback Setup > Auto Play Mode > Off.
The Setup Menu of the BDP-103D presents many setup and configuration options. For most users, the
default configuration will be sufficient and you will not require any changes to the settings. However, if
you need to configure the player to perfectly match your home theatre setup and viewing preferences,
please refer to the following sections for details about each configuration option.
Setup Menu Section is the uppermost Setup Menu level. Within the BDP-103D, there are six Setup
Menu sections listed in the left column of the Setup Menu: Playback Setup, Video Setup, Audio
Format Setup, Audio Processing, Device Setup, and Network Setup.
Power On Input
S E T U P M E NU O PTIONS
49
NOTE
It is possible that some setup items may be grayed-out and inaccessible. This can be caused
by a disc being played back or having changed a prerequisite setup item. Please stop
playback or eject the disc before trying to change these setup items. If you still cannot access
the setup item, please check for configuration conflicts and consistency. For example, if Video
Setup > 3D Output is set to Off, the 3D Setting menu item will be grayed-out. Setting 3D
Output to Forced (or Auto) will enable the 3D Setting menu.
To access the player’s Setup Menu simply press the SETUP button on the remote control. Since some Setup
Menu options can become inaccessible when a disc is being played, it is recommended that you operate the
Setup Menu when playback is fully stopped or when there is no disc in the player.
1. Press the SETUP button on the remote control, and the TV screen displays the following:
2. Press the UP/DOWN ARROW buttons to
select the section. Press the ENTER
button or the RIGHT ARROW button to
enter the selected section.
3. Press the UP/DOWN ARROW buttons to
select the setup item to be changed, and
press the ENTER or RIGHT ARROW
button to change the setting. When the
scroll icon is shown at the top or bottom of
the Setup Menu, it indicates that there are
more menu items that can be accessed by
scrolling with the UP/DOWN ARROW
buttons.
For example, in the Playback Setup
section, you may us
e t
he UP/DOWN
ARROW buttons to select the Auto Play
Mode setup item, and press the ENTER
button to change the Auto Play Mode
setting.
Power On Input
Blu-ray
Power On Input
Blu-ray
Set the auto play mode for disc
S E T U P M E N U O P T I O N S
50
4. To select a value from the list of available
settings, press the UP/DOWN ARROW
buttons and then press the ENTER button
to confirm.
For example, to select Off for Auto Play
Mode, use the UP/DOWN ARROW
buttons to highlight the Off selection and
press the ENTER button.
5. To exit the Setup Menu at any time, press
the SETUP button on the remote control or
select Exit from the Setup Menu sections.
Settings are permanently saved when the player is turned off using either the front panel power button or
the remote control. If the AC power is interrupted before the player enters s
tandby, the settings will not
be saved. To ensure that the settings are saved, please turn off the pl
ayer and turn it back on after you
make major changes to the Setup Menu options.
Power On Input
S E T U P M E N U O PTI O N S
51
Playback Setup
The Playback Setup section is designed to configure playback preferences. The setup items in this section are:
1. SACD Priority: Select which audio layer to play for SACD (Super Audio CD).
Multi-Channel – Play the high resolution multi-channel surround audio layer
Stereo – Play the high resolution 2-channel stereo audio layer
CD Mode – Play the CD layer of a hybrid SACD disc
2. DVD-Audio Mode: Select which portion of a DVD-Audio disc to play.
DVD-Audio – Play the DVD-Audio portion of the disc with high-resolution audio
DVD-Video – Play the DVD-Video portion of the disc with
Dolby Digital or DTS audio
3. Auto Play Mode: Select whether the player will start playing a CD, SACD, DVD or Blu-ray disc
automatically.
On – The disc starts
playing upon insertion into the player.
Off – The player waits for the user to start playback by pressing the PLAY button.
4. Auto Resume: Select whether disc playback will start from the previously saved point or not.
This setting applies to CDs, SACDs, DVDs and certain Blu-ray Discs.
On – Playback automatically starts from the previousl
y saved point.
Off – Playback starts from the beginning.
6. Parental Control: Sets parental control ratings in order to prevent minors from watchin
g
inappropriate content. This function depends on whether the disc has been properly rated and
encoded.
Press the ENTER button to bring up the rating selection menu.
Adjust the parental control settings by entering the current parental control password. If you
have not yet set a parental control password, default
the password is “0000”.
The Parental Control Menu contains the following sub-items:
5. Power On Input: Allows you to set the initial input source after power on. It is recommended
that you set this option only if you plan to use the player as a dedicated processor or pre-amplifier.
Last Input – Power on with the last input source. Depending on the availability of the input
device, you may experience a blank screen on the display or “No signal” warning message.
Blu-Ray (default) – Power on with the regular Blu-ray Home Menu. This choice is
recommended for regular use.
Power On Input
Blu-ray
(default)
(default)
(default)
(default)
S E T U P M E N U O P T I O N S
52
selected rating and above will be blocked, and any rating below will be allowed. If Off is
selected, all discs are allowed to play.
Area Code – Some Blu-ray Discs may have different parental control ratings for different
geographical areas. At this time the player only supports parental control ratings used in
the United States.
Change Password – To change the parental control password, enter a 4-digit number
as the new password. Enter the new password again to confirm. If the two entries match,
the new password replaces the old parental control password.
7. Language: Configure
s language preferences. This menu contains the following sub-items:
Player Language – Allows you to choose the language for the player’s Setup Menu and the
on-screen display. Currently the player supports 11 languages.
Disc Menu Language – Allows you to choose the preferred language for displaying DVD
and Blu-ray Disc menus. If a disc menu of the selected language is available, that menu will
be shown instead of the default disc menu.
Audio Language – Allows you to choose the preferred audio language for DVD and Blu-ray
Discs
. If an audio track of the selected language is available on the disc, the audio track will
be played back.
Subtitle Language – Allows you to choose the preferred subtitle language for DVDs. If a
subtitle of the selected language is available, it will be displayed. When Auto is selected, the
subtitle display is determined by the disc.
NOTE
If your preferred language is not listed in the Audio, Subtitle or Disc Menu options, select
“Other” and enter the Language Code found on page 85 of this manual.
BD Ratings – Press the UP/DOWN ARROW buttons to select the rating allowed for Blu-
ray Discs. Off means no ratings control and all discs are allowed to play. Numbers 1 to
21 corresponds to the age limit. Discs encoded with an age limit that is less than the
selected age will be allowed, and any rating equal to or above the selected age will be
blocked.
DVD Ratings – Press the UP/DOWN ARROW buttons to select the rating to allow for
DVDs. The available ratings are Kid, G, PG, PG-13, PGR, R, NC-17, Adult and Off. The
S E T U P M E N U O PTI O N S
53
Video Setup
The Video Setup section of the Setup Menu allows you to configure video output options.
3. 3D Output: Allows you to choose the video output mode for 3D content.
Auto – Outputs 3D if supported both by both the disc content and the display.
The
player automatically checks for the existence of 3D content on the disc and the 3D
the TV or projector. If both criteria are met, the player sends 3D video from its
HDMI output terminals; otherwise, only 2D video is sent out. 3D glasses (which are not sold
by OPPO) are required to enjoy the 3D movie o
n your TV.
Off – Always output 2D video format, even when 3D video exists on the disc. This
guarantees the video quality if your TV is not 3D compatible, or if some necessary
components (such as the 3D glasses) are missing.
Forced – Always output 3D video format for 3D Blu-ray Discs. You may experience a black
screen (no video output) if your TV is not 3D compatible.
1. Picture Adjustment: Adjusts picture
control settings. The BDP-103D provides a wide array of
pi
cture controls. Please refer to the Picture Adjustment section on page 57 for details about
each control.
2. Dual HDMI Output: Allows you to select the output mode when both HDMI Output ports are in
use. If only one HDMI Output is active, this selection will not apply.
Dual Display – Send digital audio and video signals to both HDMI Outputs simultaneously.
This setting is only recommended when two HDMI disp
lays are required, since the surround
sound audio signal may be down-mixed to stereo and the original audio quality may be
lost.
Split A/V (recommended) Use HDMI 1 OUT as the dedicated video output port and
HDMI 2 OUT as the dedicated audio output port. This setting will ensure the best possible
picture quality and the highest possible audio resolution.
NOTE
The player can automatically adjust the resolution of digital audio and video signals depending
on the capabilities of the connected television and receivers.
In Split A/V mode, HDMI 1 OUT has video only with no audio, but HDMI 2 OUT will have audio
and possibly video. This is because HDMI embeds audio into video data so there must always
be a video signal, even if it’s only a blank screen, to carry audio through.
For HDMI 1 OUT, the dedicated Darbee Visual Presence and Silicon Image VRS ClearView
video processors will be used unless Source Direct is selected, in which case the Darbee and
Silicon Image video processors are bypassed.
/Auto
-
(default)
compatibility of
S E T U P M E N U O P T I O N S
54
4. 3D Setting: Adjusts the playback settings for better 3D visual quality.
2D->3D Depth – Adjusts the 3D depth perception when performing 2D-to-3D conversion
(also called “simulated 3D”). The default value is 8.
3D TV Size – Allows you to enter the diagonal screen size of the 3D HDTV. This option
applies to 3D mode only. Use the number buttons on the remote to enter the actual diagonal
size of the TV screen, and then press the ENTER button to confirm. The default value is 46
inches.
5. TV Aspect Ratio: Sets the asp
ect ratio of the player’s output image.
16:9 Wide – Choose when the display is widescreen 16:9. 16:9
material will be displayed in
its native aspect ratio, and 4:3 materials will be stretched horizontally.
16:9 Wide/Auto – Choose when the display is widescreen 16:9. 16:9 material will be
displayed in its native aspect ratio, and 4:3 materials will be displayed with black borders on
both sides in order to maintain the original 4:3 aspect ratio.
For a detailed description on how to choos
e a proper TV Aspect Ratio, please refer to the
Determine the Display Aspect Ratio section on page 23 of this manual.
6. TV System: Allow
s you to choose the output video system or broadcast standard (PAL/NTSC) to
match the type of TV.
NOTE
DO NOT select Multi-system if your TV does not support both NTSC and PAL systems. The
TV display may become a black screen when you insert a disc encoded in a different system
than your TV supports. Should this happen, you can press the OPEN button to eject the disc
tray, and then use the Setup Menu to correct the TV System setting.
7. Output Resolution: Allows you to choose the output resolution that best matches your
television’s native resolution. For a detailed description on how to choose a proper output
resolution, please refer to the Select the BestOutput Resolution section on page 22 of this
manual.
8. 1080p24 Output: Allows you to set the 1080p 24Hz output options. This option only applies to
the HDMI output at 1080p resolution. Many Blu-ray Discs of theatrical movies are encoded usin
g
24Hz frame rate, the same number of frames per second
as the original theatrical film. If the TV
Blank HDMI 2 (Yes/No) – Allows you to force HDMI 2 OUT to output a blank 2D screen when
HDMI 1 OUT outputs 3D video. During 3D movie playback, when HDMI 1 is connected to a
3D display and HDMI 2 is connected to a non-3D receiver which is in turn connected to the
same 3D display, you may encounter an issue where there is no audio coming from the
receiver. Setting this option to "Yes" can resolve this issue.
PAL – When playing PAL-encoded discs, no system conversion is performed.
NTSC-encoded content is converted to PAL output. Blu-ray Discs encoded with a 24Hz
frame rate are converted to a 50Hz frame rate if neither 1080p24 Output nor Source Direct
output resolution is enabled.
Multi-system (default) – No system conversion is performed. The output video system is
the same as that encoded on the disc. Blu-ray Discs encod
ed with a 24Hz frame rate are
converted to a 60Hz frame rate if neither
the 1080p24 Output nor Source Direct output
resolution is enabled. Requires a TV that supports both NTSC and PAL systems.
NTSC – When playing NTSC-encoded discs, no system conversion is performed.
PAL-encoded content is converted to NTSC output. Blu-ray Discs encoded at a 24Hz frame
rate are converted to a 60Hz frame rate if neither 1080p24 Output
nor Source Direct output
resolution is enabled.
(default)
S E T U P M E N U O P T I O N S
55
properly supports 1080p 24Hz, smoother motion can be achieved by enabling 1080p24 Output
for these discs.
Auto (default) – Video encoded at a 24Hz frame rate will be output as 1080p 24Hz if the TV
informs the player that it can support the 1080p24 signal.
Forced – Video encoded at a 24Hz frame rate will be output as 1080p 24Hz without regard to
whether the TV can support the 1080p24 signal or not. This is useful if the TV can actually
support 1080p24 but does not properly state its capability
. Please note that if the TV cannot
support 1080p24, selecting this option will result
in no video.
Off – Video encoded at a 24Hz frame rate will be converted to 60Hz (NTSC) or 50Hz (PAL)
9.
On – Converts DVD to 24Hz frame rate when possible. Remember that motion errors may
be observed if the DVD is not suitable for such conversion.
Off (default) – Does not convert DVD to 24Hz frame rate.
10. 4Kx2K Output: Allows you to set the 4Kx2K resolution options. This option only applies to the
HDMI output at 4Kx2K resolution.
Auto
(default)
Output 4Kx2K if the resolution is supported by the display and the content is
suitable for 4K up-scaling. The player automatically checks for 4K compatibility of the TV or
projector. If the display is compatible and the content being played has a 24Hz (or 23.976Hz)
frame rate, the player sends 4Kx2K video from its HDMI output terminal; otherwise, the HDMI
video is sent out at 1080p resolution or less depending on the display’s capability.
Forced Always output 4Kx2K video format regardless of whet
her the TV or projector
supports it, or whether the content being played is suitable for 4K up-scaling. You may
experience a black screen (no video output) if the display is not 4K compatible. For content
that has a 50Hz or 60Hz (59.95Hz) frame rate, the output will be 4Kx2K at 25Hz or 30Hz
(29.97Hz), and video quality may not be optimal due to frame rate conversion.
DVD 24p Conversion: Allows you to enable 24Hz frame rate conversion for DVD. This option is
only available when 1080p
24 Output is enabled (set to Auto or Forced ). Many DVDs that
originate from theatrical movies are encoded with a technique called “3:2 telecine” in order to
convert the 24 frames per second film to 60Hz video signal. The player can convert the 60Hz video
signal back to 24 frames per second film and output as 1080P/24Hz. Smoother motion may be
achieved by enabling this option, if both the TV and the DVD disc meet the conver
sion conditions.
The available options are:
Auto (50/60Hz) This option is similar to “Auto”, except that if the source video frame
rate is 50 or 60 Hz and the TV or projector supports the video format of 4Kx2K at 50 or 60 Hz
4:2:0 colour space, then the video con
tent will be up-converted to this format through
1 OUT.
Forced (50/60Hz) This option is similar to “Forced”, except that if the source video frame rate
is 50 or 60 Hz, then it will always be up-converted to 4Kx2K at 50 or 60 Hz with YCbCr 4:2:0
colour space through the HDMI 1 OUT.
11. HDMI Options: Configures video options that apply only to the HDMI output. This item
contains
a sub-menu with multiple configuration options. Please refer to the HDMI Options section on
page 61 of this manual for details of each option.
with YCbCr
the HDMI
S E T U P M E N U O P T I O N S
56
OSD Position – Allows you to set the display position for the on-screen display (OSD).
When the OSD Position is set to 0, the OSD is shown at the top and bottom of the video
screen. When it is set at a value between 1 and 5, the OSD is shifted towards the centre of
the video screen.
Similar to the subtitle shift setting above, the OSD Position feature is helpful for customers
using a 2.35:1 “Constant Image Height” video projection system.
OS
D Mode – Allows you to select how long the on-screen displa
y (OSD) information, such
as playback operation icons (PAUSE, STOP, SKIP, etc.), stays on the TV screen.
Normal – OSD information stays on the TV screen until the user cancels it.
Minimal – OSD information stays on the TV screen for a few seconds and then
disappears. The front panel display still maintains the selected display information.
Remaining – OSD inform
ation stays on the TV screen until the user cancels it. By
default, displays remaining time instead of elapsed time.
Off – No OSD information shows on the TV screen unless the user presses the INFO
button. This mode is not recommended for daily use.
Angle Mark (On/Off) – Turns on/off the display of the angle icon when a DVD or Blu-ray
Disc with multiple angles is played. Keeping the angle mark off avoids distraction from
normal movie watching.
Screen Saver – Allows you to turn on/off the screen saver function. The screen saver is
designed to minimize burn-in concerns for plasma and CRT display devices.
On (recommended)After about 3 minutes of inactivity, the player will show an
animat
ed OPPO logo moving on a black background. This allows most areas of the
screen time to rest and gives all
areas an equal opportunity to refresh.
Off – The screen saver will not be activated. Only use this option if your TV does not
have any burn-in issues.
Energy Saver – Video output will be turned off after 3 minutes of inactivity. Many
projectors and LCD TVs will go into a standby or sleep mode and turn o
ff their projection
lamp or LCD backlight lamp, thus saving energy and prolonging the lamp life. When you
press any button on the OPPO remote control or the play
er’s front panel, the screen
saver will be canceled and video output will be restored. If your TV is already in standby
or sleep mode, you may need to wake up the TV by pressing a button on its remote or
control panel.
12. Display Options: Configures the options for displaying on-screen information.
Subtitle Shift – Sets the display position for subtitles.
When the Subtitle Shift is set at 0 (default), subtitles are displayed at the original position as
specified on the disc. When it is set at a value between 1 and 10, subtitles are shifted up.
When it is set at a value between -1 and -10, subtitles
are shifted down.
This feature is h
elpful for customers using a 2.35:1 “Constant Image Height” video projection
system. Subtitles can be shifted to the active video area so they do not get cut off. You can
also press and hold the SUBTITLE button for 3 seconds to activate this selection.
S E T U P M E N U O P T I O N S
57
Picture Adjustment
Picture Adjustment is a special section of the Video Setup menu. It allows you to fine tune many picture
control parameters in order to achieve optimal picture quality. To enter the Picture Adjustment menu, press
the SETUP button on the remote control to enter the player’s Setup Menu and choose Video Setup > Picture
Adjustment and select the video output to be adjusted:
Use the LEFT/RIGHT ARROW to select the video output, and press the ENTER button to bring up the Picture
Adjustment menu. Depending on the selected video output, the Picture Adjustment menu may be slightly
different:
Picture Adjustment Menu for HDMI 1
Picture Adjustment Menu for HDMI 2
HDMI 2
Mode 1
Picture Mode
Brightness
Contrast
Hue
Saturation
Sharpness
Noise Reduction
-16
-16
-16
-16
0
0
0
0
0
0
0
0
+16
+16
+16
+16
+16
+3
Exit
Mode 1
Picture Mode
Brightness
Contrast
Hue
Saturation
HDMI 1
-16
-16
-16
-16
-16
0
0
0
0
0
0% 120%
0
0
+16
+16
+16
+16
+3
+16
+16
+4
Noise Reduction
Demo Mode
0
0 -16
00
Darbee Mode
Darbee Level
Demo Mode
Detail Enhancement
Edge Enhancement
Video Smoothing
Exit
S E T U P M E N U O P T I O N S
58
To change a picture adjustment parameter, use the UP/DOWN ARROW buttons to highlight the
parameter, and use the LEFT/RIGHT ARROW buttons to change its value.
To aid in the adjustment of picture control parameters, the picture adjustment menu will be reduced to
only show the parameter being adjusted once you press the LEFT/RIGHT ARROW buttons (except the
Picture Mode, which you will directly see the mode name switches between Mode 1, 2 and 3, and all the
other parameters are adjusted automatically to the stored value). The reduced m
enu will be
positioned
near the bottom of the screen.
You can continue adjusting the current parameter by pressing the LEFT/RIGHT ARROW buttons. To
select another parameter, press the UP/DOWN ARROW buttons. Press the ENTER button to return to
the main Picture Adjustment menu.
To exit the Picture Adjustment menu and return to the Setup Menu, either select Exit in the menu, or
press the RETURN button.
The following picture adjustment controls are available for both HDMI 1 and 2:
1. Picture Mode: Allows you to choose a customized picture mode saved by you. The BDP-
103D
allows yo
u to save up t
o three customized modes. Press the LEFT/RIGHT ARROW buttons to
switch the mode and all parameters will be automatically adjusted to their stored values.
Changes to the current parameter values will be stored automatically when you exit the Picture
Adjustment screen or switch to another Picture Mode.
2. Brightness: Allows you to adjust the brightness (black level) of the video output.
3. Contrast: Allows you to adjust the contrast (white level) of the video output.
NOTE
Proper brightness and contrast settings are necessary for a quality video output. If you do not
have the correct black and white levels, your images can appear washed out or can lose detail
in shadows when watching darker scenes. Televisions have brightness (black level) and
contrast (white level) controls; however, it may require a combination of tweaking both the
player and your television to get the optimal result. We recommend using a calibration disc
such as the Spears & Munsil™ High Definition Benchmark Blu-ray Edition or Digital Video
Essentials HD Basics as aids for adjusting. First adjust the television’s picture controls for the
best possible picture. Once that is done, try changing the player’s settings to further refine the
picture to the optimal result.
4. Hue: Allows you to adjust the hue (tint) of the video output.
5. Saturation: Allows you to adjust the saturation (colour intensity level) of the video output.
S E T U P M E N U O P T I O N S
59
The following picture adjustment controls are only available for the HDMI 1 video output:
7.
Darbee Mode: Allows you to select the appropriate Darbee Visual Presence Viewing Modes.
Depending on the video content, the available options are:
8.
9.
Hi-Def – This mode works with Blu-ray and other high quality video sources (720p, 1080i, or
1080p). It preserves the original look of the video while imparting startling clarity and depth,
providing the video with an elegant and refined feeling of enhanced realism.
Gaming – This mode works with video games, Computer-Generated Imagery (CGI) for movies
and other clean video sources. It imparts a stronger degree of depth, separation and clarity
that video game enthusiasts appreciate. This mode is recommended when you connect a video
game console via the HDMI input of the player.
Full Pop – This mode works with low-resolution or low-quality video sources.It imparts the
strongest sense of depth and realism, but you may notice some possible visible artifacts with
text.
Off (default) – The Darbee Visual Presence is completely bypassed and the input video is not
processed. In this mode, the Darbee Level and Demo Mode (Darbee) cannot be adjusted.
Darbee Level: Allows you to adjust the level of Darbee Visual Presence processing to whichever
level is best for your TV and viewing conditions, according to your personal preference.You may
use the LEFT/RIGHT ARROW buttons on the remote to decrease/increase the level. The level
can be adjusted in 1% steps and within the range of 0 to 120%. A level of 0 is bypassed, the
same as having Darbee Mode “Off ”.
Demo Mode (Darbee Visual Presence): Allows you to enable a special split-screen mode for the
demonstration of Darbee Visual Presence video processing technology. It can also be used as an
aid for setting picture adjustments for Darbee Mode and Darbee Level. It should NOT be used for
normal movie watching. The available options are:
Split Screen – The video screen will be split in half. The left side demonstrates the result of the
Darbee Visual Presence video processing, and the right side shows video without the help of
Darbee Visual Presence processing.
Swipe Screen – This mode is similar to Split Screen mode, except the divider bar will move
continuously from left to right indicating which portion of the video is being processed.
Off (default) – Normal viewing mode.
6. Noise Reduction: Allows you to select whether the player will apply video noise reduction
processing. The default is level 0, which turns off noise reduction. When this level is increased,
the player adjusts the picture quality by applying video noise reduction, The higher the level, the
more aggressively noise reduction functions are applied.
Remember that excessive noise reduction may cause a loss of detail. We recommend using the
noise reduction function only when you encounter poorly encoded or compressed video that has
apparent noise artifacts.
Noise reduction is handled by the video decoder, and this setting applies to both HDMI 1 and
HDMI 2 outputs. As a result, the adjustment made here will be reflected on HDMI 2 as well.
NOTE
The DARBEE button on the remote control provides direct access to the Darbee Adjustment
Menu. In the menu, you can use the UP/DOWN ARROW buttons to select the Darbee Mode,
the LEFT/RIGHT ARROW buttons to adjust the Darbee Level, and the Colour buttons(RED,
GREEN, BLUE) to switch Darbee Demo Modes.
S E T U P M E N U O PTI O N S
60
NOTE
If the source content is properly produced, we generally recommend leaving these controls
at level 0.
Detail Enhancement and Edge Enhancement produce similar results, but there are subtle
differences. Detail Enhancement works best when the source material is “clean” and free
from noise. Edge Enhancement works well for less pristine sources. It produces a
sharpening effect without making noise more visible.
The Detail Enhancement and Edge Enhancement methods are additive, so the results of both
sharpening methods are combined. An example of this would be to use general sharpening to
increase detail in the entire image. If object edges are over enhanced, then negative edge-
qualified sharpening is applied to reduce the over enhancement of the edges. If general
sharpening is applied to a noisy image, the increase in noise may be objectionable. In that
case, positive edge-qualified sharpening should be applied to sharpen object edges, but not
increase the noise level.
Video Smoothing: Allows you to remove the rough edges in an image, such as the staircase
appearance of a diagonal line drawn on the screen (called the “stair stepped effect”). This smoothing
technology provided by the VRS ClearView video processor creates the effect of a high-resolution
image without softening the entire image. The video smoothing level can be set between 0 and +4.
The default is level 0, which turns off video smoothing.
12.
Demo Mode (VRS ClearView): Allows you to enable a special split-screen mode for the demonstration
of VRS ClearView video processing technology. It can also be used as an aid for setting picture
adjustments for Detail Enhancement, Edge Enhancement, Video Smoothing and Noise Reduction. It
should NOT be used for normal movie watching. The available options are:
13.
On The video screen will be split in half. The left side demonstrates the result of the
VRS Clear
View video processing, and the right side shows video without the help of VRS ClearView processing.
Off (default) Normal viewing mode.
Sharpness: Allows you to set the sharpness level for video output. Sharpness is a video processing
function that can control the image sharpness but at the same time may cause unwanted artifacts. For
HDMI 2 output, the sharpness level can be set between 0 and +16. with the default level being 0. The
higher the level, the sharper the video details are. However, too high a sharpness level may cause white
lines or halo-like effects to appear around objects.
14.
The following picture adjustment control is only available for the HDMI 2
video output:
10. Detail Enhancement: Allows you to set the sharpness level for video output (also called General
Sharpening). The enhancement level can be set between -16 and +16. with the default level being
0. Level 0 turns off detail enhancement. The negative levels may be used to reduce or eliminate
overly sharpened video, though the picture may become soft. The positive levels increase fine
detail. The higher the level, the sharper the video details are. However, too high of a sharpness
level may cause white line etching around objects. Detail Enhancement can be used together with
Edge Enhancement to achieve an optimal result.
Edge Enhancement
: Allows you to set the sharpness of object edges in the video (also called Edge
-Qualified Sharpening). The enhancement level can be set between -16 and +16. with the default
level being 0. Level 0 turns off edge enhancement. The negative levels reduce or eliminate overly
enhanced edges. The positive levels sharpen object edges. Edge Enhancement can be used
together with Detail Enhancement to achieve an optimal result.
11.
S E T U P M E N U O P T I O N S
61
HDMI Options
HDMI Options is a sub-menu of the Video Setup menu. It allows you to configure some video settings that are
unique to the HDMI output. To enter this sub-menu, select HDMI Options from the Video Setup menu. To exit
this sub-menu, press the RETURN button or the LEFT ARROW key. The following HDMI options are available:
1. Colour Space (HDMI 1) Allows you to select the colour space for the HDMI 1 ou
tput. The
available options are:
Auto (recommended) – The player checks with the display device to automatically
determine what colour sp
ace to use. If the display device supports YCbCr 4:4:4, then it will be
used to avoid extra colour space conversion.
RGB Video Level The HDMI output uses RGB colour s
pace and normal signal range
suitable for video displays.
RGB PC Level – The HDMI output uses RGB colour space and expands the signal range.
The expan
ded signal range is suitable for personal computer (PC) displays. Some TVs are
designed to be used as a PC monitor, and expect signal in expanded RGB range when the
DVI input is selected. For these d
isplays if the video signal uses the normal RGB range, the
black-white contrast will be reduced. You can set the player to use the RGB PC Level output
and restore proper contrast.
YCbCr 4:4:4 The HDMI output uses YCbCr 4:4:4 colour space
.
YCbCr 4:2:2 The HDMI output uses YCbCr 4:2:2 colour space. Generally this is the colour
space that is closest to the colour space encoded on the discs. (All discs are encoded in
YCbCr 4:2:0 colour space, and the video decoder decodes it into YCbCr 4:2:2.)
2. Colour Space (HDMI 2) Allows you to select the
colour space for the HDMI 2 output. The
available options are the same as those for Colour Space (HDMI 1).
3. Deep Colour (HDMI 1) Allows you to se
lect the Deep Colour mode for the HDMI 1 output. Deep
Colour is an option for some TVs or projectors that feature HDMI v1.3 or higher input. Normally,
each pixel of the video image is transmitted using 24-bit data (8-bit per channel for R, G, B or Y,
Cb, Cr). If Deep Colour is support , ed each pixel of the video image can be transmitted using 30-bit
(10-bit per channel
) or 36-bit (12-bit per channel) data. The increased bit depth should res
ult in
smoother colour transitions and better gradients.
36 Bits Uses the 36-bit per pixel Deep Colour mode.
30 Bits (Dithered) Uses the 30-bit per pixel Deep Colour mode with dithering technique.
30 Bits Uses the 30-bit per pixel Deep Colour mode.
Off (Dithered) Does not use Deep Colour, but applies the dithering technique.
Off (default) – Does not use Deep Colour.
4. Deep Colour (HDMI 2) – Allows you to select the Deep Colour mode for the HDMI 2 output. The
available options are the same as those fo
r HDM
I D
eep Colour (HDMI 1).
NOTE
Since the Deep Colour feature is optional and may not be supported by all TVs, enabling
Deep Colour
video.
while connected to a TV without this feature may result in no effect or no
At this time, no disc is encoded with Deep Colour. Enabling Deep Colour will not magically
make colour s richer, but will help preserve the maximum precision as a result of video
processing and picture control adjustment.
Dithering is a technique to improve the image colour depth with limited colour quantization.
SET U P M E NU O P T I ONS
62
Film – De-interlaces video originally shot with a film camera. The mode may improve film
mode detection in some cases.
Video – De-interlaces video originally shot with a video camera. Use this setting only if you
are certain the disc is not made from footage originally shot with a film camera.
5.
Auto (default) – Automatically selects the de-interlacing mode depending on the video type.
This is the recommended setting as it sets the player to optimally process a variety of signal
types.
De-interlacing Mode – Allows you to select the algorithm that the player should use to convert
interlaced video on a DVD or Blu-ray Disc to progressive output. Selecting the proper de-interlacing
mode will ensure the output video matches the original content and is free of de-interlacing artifacts.
The available options are:
S E T U P M E N U O PTI O N S
63
Audio Format Setup
The Audio Format Setup section of the Setup Menu allows you to configure preferences for audio output
formats.
1. Secondary Audio: Allows you to set the Secondary Audio Program mixing option. Some Blu-ray
Discs contain a secondary audio and video program, such as a director’s commentary. Some
Blu-ray Discs have a sound effect when you make menu choices. This Setup Menu item allows
you to decide whether to mix the Secondary Audio Program and menu
sounds into the primary
audio.
On – The Secondary Audio Program and menu sounds
are mixed into the primary audio.
Usually this will cause the primary audio volume to be slightly reduced.
2. HDMI Audio: Allows you to select the digital audio output format from the HDMI port. The
options are:
Auto (default)The player checks with the device connecting to the HDMI output to
automatically determine which audio format to use.
LPCMDigital audio output via HDMI will be in the multi-channel Linear PCM format. When
this option is selected, compressed audio bit streams will be decoded by th
e player. This
setting is recommended when connecting the HDMI output directly to a TV or to a receiver
without advanced audio decoding capa
bilities.
Bitstream – Digital audio output via HDMI will be in bitstream format. This option is
recommended when connecting the HDMI output to an A/V receiver or processor that
supports advanced audio decoding, such as Dolby TrueHD and DTS-HD Master Audio.
Off – No digital audio output via HDMI.
Off (default) – The Secondary Audio Program and menu sounds are not mixed into the primary
audio and yo
u cannot hear the secondary audio or menu sounds.
This setting is recommended
since it preserves the highest possible audio quality for the primary audio.
48kHz). If you play high resolution audio content at the 480p/576p resolution, you may get
reduced audio resolution, incomplete audio channels, or even no audio/video output at all.
Choosing a higher output resolution such as 720p or above allows enough bandwidth for all
high sample rate audio channels.
NOTE
If you use HDMI to connect audio to an HDMI A/V receiver or audio processor, it is important
that you choose 720p or higher HDMI output resolution when playing high resolution audio
content (DVD-Audio, SACD, Dolby TrueHD and DTS-HD Master Audio). According to the HDMI
specification, the bandwidth available for audio is proportional to the total bandwidth used by
video. At 480p/576p resolution, the HDMI specification can only support 2 channels of audio
with high sample rate (up to 192kHz), or 8 channels of audio with standard sample rate (up to
PCM
S E T U P M E N U O P T I O N S
64
3. Coaxial/Optical Output: Allows you to set the audio format and the upper sample rate limit for
coaxial/optical (S/PDIF) digital outputs. The upper sample rate limit is used to decide whether the
player will down-sample audio (the player does not up-sample audio to higher sample rates).
48k LPCM – Forces down-mixed 2-channel, linear PCM (LPCM) digital audio format, and sets
the maximum sample rate to 48kHz. This is supported by most receivers/amplifiers.
96k LPCM – Forces down-mixed 2-channel, linear PCM (
LPCM) digital audio format and sets
the maximum sample rate to 9
6kHz. It can result in better audio quality but ensure the
receiver/amplifier can support it.
192k LPCM – Forces down-mixed 2-channel, linear PCM (LPCM) digital audio format and sets
the maximum sample rate to 192kHz. It can result in better audio quality but ensure the
receiver/amplifier can support it.
Bitstream – Passes audio as compressed bitstream format to the recei
ver/amplifier. Choose
this setting if your receiver/amplifier is capable of decoding Dolby Digital and/or DTS.
4. SACD Output: Allows you to select the audio output format for SACD playback.
PCM – SACD data is converted into multi-channel, high-resolution PCM data. The
converted PCM data is then output through HDMI or the internal DAC (Digital to Analogue
Converter) for the analogue audio output ports. If you use a receiver that supports HDMI v1.1
listen to SACD, please select this option. You may also want to select this option if you pre
fer
quality of the DSD-to-PCM conversion.
DSD – SACD Direct Stream Digital (DSD) data is output over HDMI without any conversion.
For the analogue audio outputs, DSD data is converted into an analogue signal directly by the
internal DAC. If you use a receiver that supports HDMI v1.2a with DSD over HDMI, or you
prefer the sound quality of straight DSD to analogue, please select this option.
Auto – The player checks with the device connected to the HDMI output to automatically
determine which audio format (DSD or PCM) to use for SACD playback.
the sound
to
(default)
NOTE
Due to copyright restrictions and bandwidth limitations, SACD audio cannot be sent through the
coaxial/optical audio output, and the high resolution audio on DVD-Audio and Blu-ray discs will
be sent out at reduced resolution. Details can be found on page 17.
5. HDCD Decoding: Allows you to set the audio decoding option for HDCD (High Definition
Compatible Digital) discs.
On – HDCD is decoded by the player. You can enjoy expanded dynamic range and improved
audio resolution.
Off – HDCD is treated as regular CD. This is useful when the player is connected to
an HDCD- capable A/V receiver via a digital audio output link (Coaxi
al, Optical, or HDMI)
so the A/V receiver can perform HDCD decoding.
(default)
NOTE
If your receiver is capable of HDCD decoding, it is recommended that you set the HDCD
Decoding setting to Off on the BDP-103D in order to avoid decoding HDCD twice. This will
prevent the occasional pop or crackle sounds that occur when HDCD is decoded twice.
SET U P M E NU O P T I ONS
65
Audio Signal Reference Chart
Blu-ray Discs may contain many types of audio signal formats, some of which are high resolution types such as
Dolby TrueHD and DTS-HD Master Audio. Blu-ray Discs also have many optional audio components such as
the Secondary Audio Program and menu clicking sound. The player’s Audio Format setup menu allows you to
configure the audio output to meet your specific preference. The following chart provides a reference to what
type of audio signal can be expected.
When Secondary Audio is set to Off:
Output Ports tuptuO lacitpO/laixaoC
Analogue
Multi-Channel
Output
Setting Source
Format
Bitstream LPCM Bitstream LPCM
LPCM 2ch
LPCM 2ch LPCM 2ch LPCM 2ch LPCM 2ch 2ch
LPCM 5.1ch
LPCM 5.1ch LPCM 5.1ch LPCM 2ch LPCM 2ch 5.1ch
LPCM 7.1ch
LPCM 7.1ch LPCM 7.1ch LPCM 2ch LPCM 2ch 7.1ch
Dolby Digital
Dolby Digital LPCM 5.1ch Dolby Digital LPCM 2ch 5.1ch
Dolby Digital
Plus
Dolby Digital
Plus
LPCM up to 7.1ch Dolby Digital LPCM 2ch Up to 7.1ch
Dolby TrueHD
Dolby TrueHD
LPCM up to 192kHz
24-bit 7.1ch
Dolby Digital LPCM 2ch Up to 7.1ch
DTS
DTS LPCM up to 7.1ch DTS LPCM 2ch Up to 7.1ch
DTS-HD High
Resolution
DTS-HD High
Resolution
LPCM up to 7.1ch DTS (core) LPCM 2ch Up to 7.1ch
DTS-HD Master
Audio
DTS-HD
Master Audio
LPCM up to 96kHz
24-bit 7.1ch or 192kHz
24-bit 2ch
DTS (core) LPCM 2ch Up to 7.1ch
When Secondary Audio is set to On and the player encounters a disc with a secondary audio track or menu
sounds:
tuptuO lacitpO/laixaoC tuptuO IMDH stroP tuptuO
Analogue
Multi-Channel
Output
Setting Source
Format
Bitstream LPCM Bitstream LPCM
LPCM 2ch
LPCM 2ch LPCM 2ch LPCM 2ch LPCM 2ch 2ch
LPCM 5.1ch
LPCM 5.1ch LPCM 5.1ch LPCM 2ch LPCM 2ch 5.1ch
LPCM 7.1ch
LPCM 7.1ch LPCM 7.1ch LPCM 2ch LPCM 2ch 7.1ch
Dolby Digital
Dolby Digital* LPCM up to 5.1ch Dolby Digital* LPCM 2ch 5.1ch
Dolby Digital
Plus
Dolby Digital* LPCM up to 7.1ch Dolby Digital* LPCM 2ch Up to 7.1ch
Dolby TrueHD
Dolby Digital*
LPCM up to 192kHz
24-bit 7.1ch
Dolby Digital* LPCM 2ch Up to 7.1ch
DTS
DTS* LPCM up to 7.1ch DTS* LPCM 2ch Up to 7.1ch
DTS-HD High
Resolution
DTS* LPCM up to 7.1ch DTS* LPCM 2ch Up to 7.1ch
DTS-HD Master
Audio
DTS* LPCM up to 7.1ch DTS* LPCM 2ch Up to 7.1ch
Note: All audio output signals are mixed with primary, second audio and menu sounds. “Dolby Digital*and
“DTS*” denote mixed audio re-encoded into the original bitstream audio format.
HDMI Output
S E T U P M E NU O PTIONS
66
Recommended Audio Format Options
Depending on your specific audio/video connection method, the audio format options of the BDP-103D may
need to be adjusted to match your configuration. Refer to the video and audio connection methods described
previously in this guide and the following audio setup guidelines.
Audio Connection Directly to TV
If the player is connected directly to the TV through HDMI (as described on page 13) or through DVI and
analogue L/R audio cables (as described on page 15), it is recommended that you
use the following audio format
options:
o Secondary Audio: On
o HDMI Audio: LPCM
o SACD Output: PCM
o HDCD Decoding: On
o Coaxial/Optical Output: (any – not in use)
Multi-Channel Digital Audio to Receiver through HDMI
If the player is connected to an A/V receiver or processor with HDMI inputs (as described on page 11), you can
send all current audio formats to your receiver in pure digital form. To get the best possible audio via HDMI, you
may need to set the following options on the player’s Audio Format setup menu:
If
your receiver supports HDMI v1.3 with decoding capability for high resolution lossless audio
formats such as Dolby TrueHD and DTS-HD Master Audio, please use the following audio format
options:
o Secondary Audio: Off (or On if you need secondary audio)
o HDMI Audio: Bitstream
o SACD Output: PCM (or DSD if the receiver supports DSD over HDMI)
o HDCD Decoding: On (or Off if the receiver can decode HDCD)
o Coaxial/Optical Output: (any – not in use)
If your receiver supports HDMI v1.1/1.2 Multi-Channel PCM audio, but not high resolution
lossless audio formats such as Dolby TrueHD
and DTS-HD Master Audio, please use the
following audio format options:
o Secondary Audio: Off (or On if you need secondary audio)
o HDMI Audio: LPCM
o SACD Output: PCM (or DSD if the receiver supports DSD over HDMI)
o HDCD Decoding: On (or Off if the receiver can decode HDCD)
o Coaxial/Optical Output: (any – not in use)
Multi-Channel Analogue Audio to Receiver
If the player is connected to an A/V receiver through the 7.1ch or 5.1ch analogue audio jacks using 8 or 6 RCA
cables (as described on page 16), you can play all supported audio formats and listen to
them with your A/V
receiver and surround sound systems. The following audio format setup options are recommended:
o Secondary Audio: Off (or On if you need secondary audio)
o
HDMI Audio: Off
o SACD Output: PCM or DSD (depending on your listening preference)
SET U P M E NU O P T I ONS
67
o HDCD Decoding: On
o Coaxial/Optical Output: (any – not in use)
Also set the Speaker Configuration in the Audio Processing menu:
Set Down Mix to 7.1Ch or 5.1Ch.
Set the speaker size and subwoofer according to your actual audio hardware. (see page 70)
Enable or select the multi-channel analogue inputs on your receiver
Coaxial or Optical Digital Audio to Receiver
If the player is connected to an A/V receiver with Coaxial/Optical inputs (as described on page 17), and the A/V
receiver supports Dolby Digital and DTS de
coding, the following audio format setup options are recommended:
o Secondary Audio: Off (or On if you need secondary audio)
o HDMI Audio: Off
o SACD Output: (any – SACD is not available through optical/coaxial
output)
o HDCD Decoding: On (or Off if the receiver can decode HDCD)
o Coaxial/Optical Output: Bitstream
Stereo Analogue Audio to Receiver
If you primarily listen to stereo content or if your receiver only offers stereo audio connections, please use the
analogue RCA-style cables to connect the FL (Front Left) and FR (Front Right) terminals of the player to your
receiver
(as described on page 16). The following audio format options are recommended:
o Secondary Audio: Off (or On if you need secondary audio)
o HDMI Audio: Off
o SACD Output: PCM or DSD (depending on your listening preference)
o HDCD Decoding: On
o Coaxial/Optical Output: (any – setting to 192k LPCM may help to get the best
analogue audio quality)
S E T U P M E N U O PTI O N S
68
Audio Processing Setup
Speaker Configuration
In the Speaker Configuration menu you can configure speaker settings such as down-mix mode,
number of speakers, their distance, size and trim level. The Speaker Configuration menu shows an
illustration of speaker placement to assist you in properly configuring your speakers.
Down Mix
Test Tone
Exit
The Audio Processing section of the Setup Menu allows you to configure how the player will process audio
signals before sending them to the output. In this section, all of the settings only affect the analogue audio outputs,
with a few exceptions listed in the “Note” section below.
Upon entering this menu, the cursor is positioned on the front left speaker. You may use the LEFT/RIGHT
ARROW buttons to move the cursor. The RIGHT ARROW button moves the cursor clockwise, and the
LEFT ARROW button moves the cursor counterclockwise. When the cursor is over the Down Mix, Test
Tone or Exit options, you can also use the UP/DOWN ARROW buttons to highlight these options.
NOTE
Dynamic Range Control (DRC) and A/V Sync also affect the HDMI, coaxial, and optical outputs.
Speaker Configuration mainly applies to the multi-channel analogue audio outputs. However,
when Coaxial/Optical Output is set to LPCM in the Setup Menu, its signal becomes a
down-mixed stereo version of the multi-channel signal that is sent to the multi-channel analogue
audio outputs. As a result, the LPCM signal from the coaxial and optical output is affected by the
settings in Speaker Configuration.
HDMI is unaffected by the settings in Speaker Configuration, and the coaxial and optical outputs
are also unaffected by these settings when Coaxial/Optical Output is set to Bitstream.
Maximum Volume 100
Power On Volume
Last
Fixed
S E T U P M E N U O P T I O N S
69
Down Mix Mode
Downmixing is the process of converting multi-channel audio to a lesser number of channels. For
example, converting a 5.1ch source to stereo or converting a 7.1ch source to 5.1ch. Downmixing allows
the audio output from the player to match the exact number of speakers available in your home theatre.
The current down mix mode is displayed in the lower right corner of the speaker placement illustration.
To change the audio down mix setting, press the ENTER button while the cursor is over the Down Mix
option. The follo
wing down mix modes are available:
LT/RT – Left Total/Right Total. The centre and surround channels are mixed into the two front
channels according to the LT/RT matrix. A Dolby Pro Logic receiver will decode the two-channel
audio into surround audio.
Stereo - This mode down mixes multi-channel audio to 2-channel stereo output. For original
stereo content the output will not change. For original multi-channel content the surround and
centre channels will be mixed with the left and right front channels. This is recommended for use
with TV sets or stereo rece
iver/amplifiers.
5.1Ch – This mode enables 5.1ch decoded audio o
utput. The number of actual output channels
depends on the disc. If the source content has more channels, the surround back channels will
be mixed into the surround channels.
7.1Ch – This mode enables 7.1ch decoded audio output. The number of actual output channels
depends on the disc. For 6.1ch contents, the left and right surround back speakers will both
output the same surround back audio channel.
Test Tone
Test tones are artificially-created sounds that
are used to test your audio speaker system and help to identify
any wiring faults. By
default the Test Tone is set to Off, with the status displayed in the lower left corner of the
screen.
Please note these test tones only work with the multi-channel analogue audio outputs and are only suitable for
channel identification purposes. For comprehensive speaker configuration, we recommend using the dedicated
test tones found on professional audio calibration discs.
To begin the test, press the ARROW buttons to highlight the Test Tone option, and press the Enter button to
change the test tone status to On. Press the ARROW buttons to select a speaker, and you will hear the t
est
sounds. To stop the test process, press the ARROW buttons to highlight the Test Tone option and press the
Enter button to switch the status back to Off.
S E T U P M E N U O PTI O N S
70
Speaker Settings
You can set the size, distance and trim level for each speaker by using the LEFT/RIGHT ARROW
buttons to move the cursor to highlight the speaker and then press the ENTER button. The Speaker
Settings menu on the right side of the screen will be activated. In Speaker Settings, use the UP/DOWN
ARROW buttons to select a parameter, and then press the ENTER button to change it. To exit the
Speaker Settings menu and return to the Speaker Configuration illustration, press the LEFT ARROW
button or select the
Exit option. You can also move on to configure the next speaker by selecting
the
Next Speaker option.
The following speaker parameters can be configured:
1. Size: The following speaker size parameters control bass filtering for the speakers.
Large – All audio content is passed to the appropriate speaker.
Small – All audio content, except for bass frequencies, is passed to the appropriate speaker.
The purpose is to reduce possible distortion. If a subwoofer is available, bass frequencies are re-
directed to the subwoofer, otherwise, they are discarded. The bass freq
uency upper limit is set
by the Crossover Frequency selection in the Setup Menu (see
page 72 for details).
Off – Speaker for the corresponding position does not exist. Audio for the missing speaker is
redirected to other speakers or discarded if redirection is not possible.
On (for Subwoofer only) – Specifies that a subwoofer is available.
NOTE
The Size for Front, Surround and Surround Back speakers is configured in pairs. Changes to
the size of one speaker will automatically change the other of the pair.
2. Distance: The speaker distance parameters set delay control for the corresponding audio channel.
The delay is to compensate for the audio propagation time difference caused by the placement of
speakers.
Speaker distance compensation is not required if the A/V receiver has the capability to adjust
channel delay and compensate for speaker distance differences. However, if your receiver does not
have such functions (most receivers do not offer these functions for their multi-channel analogue inp
ut),
you may adjust them through the player. Speaker distance delay is only a
pplied if the player is
decoding multi-channel audio. If you use bitstream audio output to your A/V receiver, the bitstream
audio is not adjusted for speaker distance delay.
Down Mix
Test Tone
Exit
SET U P M E NU O P T I ONS
71
A typical 7.1-channel speaker layout and their speaker distance measurements are displayed as
below:
FL
FR
C
SW
SL
SR
SBL SBR
Speaker Icons:
FL - Front Left
FR - Front Right
C - Centre
SW - Subwoofer
SL - Surround Left
SR - Surround Right
SBL - Surround Back Left
SBR - Surround Back Right
1
2
3
Distances:
1 - Listener to Front
2 - Listener to Centre
3 - Listener to Surround Left
In the above diagram, measure the distance (in feet) from the primary listening position to the Front
Left or Front Right Speaker. Enter the distance of the Front Speakers (
in the above picture) into
the Speaker Configuration menu.
Next, measure the distance (in feet) from centre speaker (
) to the listening position. Move the
cursor to highlight the Centre speaker in the Channel Delay setup page, and enter the distance (as
close as possible) in feet. Repeat for each speaker in the system (Centre, Surround Left, Surround
Right, Surround Back Left, Surround Back Right and Subwoofer) as available. The player will insert
appropriate delay to make sure sound waves from different speakers arrive at the listener at the
same time.
It is possible to independently set distances for each speaker. Speaker distances can be set to the
actual spatial distance
of the speakers.
If the channel delay settings cannot match your speaker configuration, please set all distances to the
same and use your receiver/amplifier to set the channel delay.
3. Trim: The speaker trim level parameters sets the volume of each individual channel. Channel trim
is generally not required since most A/V receivers have the capability to adjust channel trim and
compensate for speaker sensitivity differences. However, if your receiver does not have such
functions (many receivers do not support ch
annel trim for their multi-channel analogue inputs), you
may adjust channel trim through the player. For most accurate results, it is recommended that you
use test tones from a calibration disc, such as Digital Video Essentials HD Basics , and a SPL
(Sound Pressure Level) meter. The trim level can be set to +/- 10dB in 0.5dB increments.
NOTE
Increasing the Trim Level above 0dB may result in distortion if the original audio level is
already high. When this occurs the waveform becomes clipped and audible distortion can
be heard. In this situation, it is necessary to reduce the Trim Level until the distortion is
removed. When using the Trim Level for speakers, it is recommended that you set the
least sensitive speaker’s Trim Level to 0dB, and set other speakers’ Trim Level to
negative values.
The Test Tone can be used in conjunction with the player’s trim control. Each speaker
can be set to independent trim levels and there is no linked pair limitation.
S E T U P M E N U O PTI O N S
72
Other Audio Processing Settings
In addition to Speaker Configuration, Crossover Frequency and Dynamic Range Control are audio
processing settings that can be configured:
1. Crossover: Allows you to set the Bass Management kick-in frequency for all speakers. When the
speaker size is set to Small in Speaker Configuration (see page 70), bass information below this
frequency is not passed to the speakers to reduce possible distortion, and if the subwoofer is
available, bass information will be re
directed to the subwoofer. When all speaker sizes
are set to
Large, there is no Bass Management.
40Hz / 50Hz / 60Hz / 70Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 130Hz / 140Hz / 150Hz
/160Hz / 200Hz / 250Hz
– These are the available crossover frequencies. You can press the
UP/DOWN ARROW buttons and the ENTER buttons to select it. This option applies to all
speakers (centre, front, surround, and surround back speakers). By default the crossover
frequency is 80Hz.
2. Dynamic Range Control: Allows you to set
the Dynamic Range Compression (DRC). DRC can
smooth out the sonic peaks and valle
ys common with wide-range digital audio. Enabling DRC may
make low level audio more audible during low-level listening. Turning off DRC restores the sonic
energy present in the original recording.
Auto – Plays at the dynamic range specified by the disc. This option applies to certain
Blu- ray Discs only, which have DRC instructions encoded in the Dolby TrueHD audio tracks.
On – Turn on DRC for all Dolby a
nd DTS audio formats. This option applies to all DVD and
Blu-ray Discs.
Off – Turn off DRC.
NOTE
Dynamic Range Compression is applied to the analogue audio output and digital audio outputs
(HDMI,Coaxial and Optical) when the audio format is set to PCM.
3. DTS Neo:6 Mode: Allows you to enable DTS Neo:6 audio processing and select the listening mode.
DTS Neo:6 is a digital signal processing that can expand the original stereo source to 7.0 (L, R, C, L
S
,
R
S
, L
R
, R
R
) or 7.1 (with Bass Management) surround.
Music – Enables DTS Neo:6 audio processing for stereo music sources.
Cinema – Enables DTS Neo:6 audio processing for digital TV box or stereo movie sources.
Off (default) – Turns off the DTS Neo:6 to keep the orig
inal audio quality.
4. Output
Volume: Allows you to enable or disable the analogue volume controls (also known as Variable
Audio). The available options are:
Variable – Enables the analogue volume control. Use the VOL+/- buttons on the remote to
increase/decrease the analogue audio output level (the maximum is 100).
Fixed Disables the analogue volume control. The VOL+/- buttons on the remote will
longer affect the analogue audio output, and the volume level
is fixed to 100.
5.
Power On Volume: Allows you to set the initial audio volume level after power on. This option will be
applied to the 7.1 audio outputs.
40 (Custom) – Power on with your preferred volume level. You may use the LEFT/RIGHT
ARROW buttons on the remote to decrease/increase the volume level. The default level is 40.
Last (default) – Power on with the previous volume level before the player was turned off. This
choice is recommended for regular use.
(default)
(default)
no
S E T U P M E N U O PTI O N S
73
A/V Sync: Allows you to add a slight delay to the audio so it is synchronized to the video. You may
use the LEFT/RIGHT ARROW buttons on the remote to decrease/increase the audio delay. The delay
can be adjusted in 10ms steps and within the range of -100ms to +200ms. The delayed time will be
applied to all output terminals including HDMI 1 and 2, Coaxial, Optical, and 7.1 outputs.
7.
NOTE
The actual audio delay effect might be different for each of the output terminals due to the
different audio process algorithms and signal paths used for each output. Please adjust this
setting based on the actual output terminal in use.
The negative adjustment values are for cancelling out the audio delay that the player
automatically applies. Depending on the video source and the time it takes to process the
video, the main decoder chip automatically applies an audio delay in order to optimize audio
video synchronization. The negative manual settings reduce the automatic audio delay, while
the positive manual settings apply additional delay. Any negative value setting beyond the
player's automatic delay will be treated as completely cancelling the automatic delay. For
example, if the "A/V Sync" value is manually set to -100ms and for the current video source
the player applies a 70ms automatic audio delay, the final result is that the 70ms audio delay
gets cancelled and the audio is not delayed at all. It is not possible to put audio
ahead of video
using this setting.
For content sent through HDMI IN, the "A/V Sync" adjustment only works with positive values.
6. Maximum Volume: Allows you to set the maximum volume level. This option will be applied to the
7.1 audio outputs. You may use the LEFT/RIGHT ARROW buttons on the remote to
decrease/increase the volume level. The default value is 100.
S E T U P M E N U O P T I O N S
74
Device Setup
The Device Setup section of the Setup Menu system allows you to configure additional player options related
to the hardware and control functions.
1. Firmware Information: Displays the currently installed firmware version.
2. Firmware Upgrade: Upgrades the player’s firmware. This operation is only available when the
playback is completely stopped or when there is no disc loaded.
The firmware is the system software that controls the features and functions of the player. Since the
Blu-ray Disc specifications are new and evolving, it is possible that a Blu-ray Disc manufactured after
th
e player was manufactured uses certain new features of the Blu-ray Disc specifications. To ensure
the best possible viewing experience, the player may need a firmware update from time to time.
Please visit the OPPO Digital UK Ltd web site www.oppodigital.co.uk to check for firmware updates
and
instructions on installing the updates.
There are three ways to upgrade the player’s firmware:
Via USB – You may download the firmware files from the OPPO Digital UK Ltd web site to
a USB drive and then use the USB drive to upgrade the player. Please follow the instructions
on the firmware download web page.
Via Disc – You may requests a firmware upgrade disc from OPPO Digital UK Ltd or download
a
disc image from the OPPO Digital UK Ltd web site and burn an upgrade disc. Please follow
the instr
uctions that come with the upgrade disc.
Via Network – If the player has a working Inte
rnet connection (see pages 19 and 78), you
may upgrade the player directly over the Internet. Please follow the instructions on your TV
screen.
3. Firmware Notification: Allows you to set whether the player should automatically check for new
firmware versions on the Internet server and notifies you about new firmware.
On – Checks for firmwa
re updates automatically and notifies the user about new
firmware. Requires a working network connection.
Off – Does not check for new firmware version a
utomatically.
4.
Energy EfficientStandby Mode
10XEU-xx-xxxx
Remote Control Code: The BDP-103D can respond to one of four sets of remote control codes.
The default is “Code 1”. If you have other OPPO products in the vicinity of the BDP-103D, the
other products may respond to the BDP-103D remote control. To prevent this, you can select a
different remote code. The available codes are:
Sleep Timer
(default)
S E T U P M E NU O PTIONS
75
Code 1OPPO disc player remote code is set to 1. This is the default remote code.
Code 2OPPO disc player remote code is set to 2. Use this code if you have other OPPO
products placed close to the BDP-103D.
Code 3OPPO disc player remote code is set to 3. Use this code if you have other OPPO
products placed close to the BDP-103D.
Alt. CodeAlternative remote code. The alternative remote control code enables users to
program their universal remote controls that come with TV, projector or A/V receiver to
operate the OPPO pl
ayer. If the universal remote control has a DVD player control function,
please program it with the code for Toshiba, Philips, Magnavox, Marantz or Zenith DVD
players. Since each brand of remote control may have several sets of codes, you may need
to try several times using different codes to find a working code.
If you have selected a new remote code, you must set the remote control handset to use the same code.
Please refer to the Changing the Remote Code section on page 10 of this manual for details. If you have
selected Alt. Code, the supplied handset will not operate
the player, and you must use a universal remote
control with the properly configured code set.
5. HDMI CEC: Allows you to set the HDMI Consumer Electronics Control (CEC) mode. CEC is an
optional HDMI feature that enables convenient remote control and automatic setup of consumer
electronics over the HDMI connection. The remote control function allows you to use a single remote
handset to operate multiple devices connected via HDMI. For example, you may use the TV remote
to control playback of the Blu-ray Disc player. The automatic setup function can
automatically turn on
the TV and change to the proper input when you start playing a disc in the Blu-ray Disc player. It can
also turn off the player automatically when you turn off the TV. The implementation and compatibility
of this feature varies by device manufacturer. Each may only implement part of the features or add
their own proprietary functions. The manufacturer-specific implementation of the HDMI CEC function
is often given a proprietary name of “…Link” or “…Sync”. The BDP-103D provides three HDMI CEC
function modes for each of its HDMI outputs:
HDMI 1 – HDMI CEC is enabled on HDMI 1 output. Use this mode if your other devices are
compatible with the player.
HDMI 1 (Limited) HDMI CEC is enabled on HDMI 1 output, but the BDP-103D will only
respond to playback control commands. It will not respond or issue power on/off and input
selection commands. Use this mode if you do not want the automatic setup function to turn
on/off your devices.
HDMI 2 – HDMI CEC is enabled on HDMI 2 output. Similar to HDMI 1.
HDMI 2 (Limited) HDMI CEC is enabled on HDMI 2 output, but the BDP-103D will only
respond to playback control commands. Similar to HDMI 1 (Limited).
Off (default) – HDMI CEC feature is turned off on both HDMI output terminals. The player will
not respond to HDMI CEC commands from other devic
es, nor will it setup other devices
automatically.
6.
Standby Mode: Allows you to choose between two standby modes. In Energy Efficient mode, the
player consumes a minimal amount of power but takes more time to get ready for operation after
being turned on. In Quick Start mode, the player can start up significantly faster at the expense of
additional power consumption during the standby period.
Energy Efficient (default) – The player will take slightly longer to start up, but will
consume less power in standby mode. This mode is recommended for regular use.
SET U P M E NU O P T I ONS
76
Quick Start – The player takes less time to start up but consumes more power in standby
mode. This mode is recommended if the player is used frequently, or if you need to supply
power to a device connected to the player’s MHL port during the standby period.
8. Front Panel Brightness: Allows you to control the display intensity of the front panel Vacuum
Fluorescent Display (VFD) information window and the OPEN/CLOSE tray button backlight. If you
feel that the display becomes a distraction to your enjoyment of the video, this option allows you to
dim it or turn it off.
Standard (default) - The VFD window and the OPEN/CLOSE tray button backlight are at full
brightness.
Dim - The VFD window and the OPEN/CLOSE tray button backlight are at reduced
brightness.
Off – The VFD window and the OPEN/CLOSE tra
y button backlight are turned off. In this
mode, the display and backlight will resume momentarily if there is any user operation.
10. Persistent Storage: Allows you to manage the persistent storage for BD-Video content. The
persistent storage is a data storage area that holds additional content for BonusView and BD-Live
features. The data will be kept even if you turn off the player. The following persistent storage
management options are available:
Storage DeviceAllows you to select which storage device should be used as the persistent
storage. The BDP-103D preserves about 1GB of internal flash memory that can be
used for
persistent storage. There are also three USB ports on the player that can accept a USB drive
to be used as the persistent storage. You may choose from the following:
Internal Flash – Uses the internal flash memory for persistent storage.
USB Drive Uses a USB drive for persistent storage. To meet the specification for
BD-Live, a USB flash drive of 1GB or larger is required. A USB hard drive is not
recommended.
7.
Off
(default) – The player will not turn itself off automatically.
30/45/60/90/120 Min – These are the available time increments (in minutes) you can choose
before the player automatically shuts itself down. You can press the UP/DOWN ARROW
buttons and the ENTER button to select the desired time. Once selected, the remaining
minutes will be displayed to the right of the “Sleep Timer” option.
9.
Off – The downloaded media file information is not saved. Retrieving the media information
from the internet may take some time and could slow down media file navigation.
Cache Media Info: Allows you to set the online media file information caching option. This option
can provide a better media file navigation experience by caching some of the media information
in an “OPPO_Media_Info” folder created on the root directory of the connected USB drive.
On (recommended) – The downloaded media information will be saved on the same USB hard
disk or thumb drive as the media files for faster navigation.
Sleep Timer: Allows you to specify the amount of time before the player automatically turns itself off.
S E T U P M E NU O PTIONS
77
15. Reset Factory Defaults: To reset all settings to the factory default value. This operation also set
BD-Live Network Access to be Off (details on page 78) and performs Erase Persistent Storage
(details on page 77). However, the remote control code will not be reset. This operation is only
available when the playback is completely stopped or when there is no disc loaded.
Erase Accounts and Settings (default) – Resets all settings to the factory default value and
remove all application activations and account information, such
as your Netflix and VUDU
accounts.
Erase Settings – Resets all settings to the factory default value, but keeps the application
activations and account information.
13. Settings Management: Allows you to backup or restore the player settings. This option affects the
settings in the Setup Menu. It does not export/import private information such as Wi-Fi password,
internet application activations, or account information.
Restore Settings – Restore the player’s settings from external USB storage. The player will
access the first detected USB storage device for the configuration file. To avoid any confusion,
we recommend only connect one USB storage device to the player at this time.
Backup Settings – Backup the player settings to the first detected USB storage device. The
player will create a new configuration file named “[player model].cfg”, such as “BDP103D.cfg”,
and the settings will be stored in binary format which can only be accessed by OPPO technical
support.
14. Auto Power Off: To allow the player to auto-shutdown after 30 minutes of inactivity. This can help
to reduce power consumption and increase player life.
OnEnable the Auto Power Off.
Off (default) – Disable the Auto Power Off.
NOTE
The new storage device choice becomes effective only after the player is restarted. Please
make sure that you turn off the player and then turn it back on after changing the Storage
Device option.
Space Used Displays the used space of the persistent storage. If too much space is used
and the available space becomes too low, some Blu-ray Discs may not play properly.
Erase Persistent Storage Erases the BD-Video data from the persistent storage or
initializes a USB drive so it can be used for persistent storage.
11. Netflix: Allows you to de-activate your Netflix account.
Netflix ESN – Displays the Netflix ESN (Electronic Serial Number) for your player.
De-activate Netflix – De-activates the Netflix account on your player. Once de-activated, you
have to go to the Home
Menu,
select Netflix, and go through the activation procedure again
to be able to access Netflix from your player.
12. VUDU: Allows you to de-activate your VUDU HD Movies account (USA only).
SET U P M E NU O P T I ONS
78
Network Setup
The Network Setup section of the Setup Menu system allows you to configure the player’s network
connection, test the connection, and enable or disable BD-Live access.
1. Connection Information: Displays the current internet connection information, such as connection
type, IP address, Ethernet MAC, Wireless MAC, etc.
3.
2.
BD-Live Network Access: Used to permit or restrict BD-Live content access.
On – BD-Live access is permitted.
Limited – BD-Live access is permitted only for content that has a valid content owner
certificate. Internet access is prohibited if the BD-Live contents does not have a certificate.
This option ensures that you are accessing only authentic content, although it may block
your access to smalle
r
independent content providers.
Off (recommended) – BD-Live access is prohibited.
4. My Network: Configures the My Network (in-home media sharing) client. My Network enables the
player to stream audio, video, and photos from media servers within the home network.
On (default) – Enables local network streaming. A broadband internet connection is required
(details on page 19), and special hardware/software configurations are required (see In-
home Network Media Shar
ing on
page 41). The available media servers are listed inside the
Network option of the Home Menu (details on page 42).
Off – Disables local network streaming. No media servers will be shown in the Network
menu, and a warning message will pop up once you try to enter the Network menu.
5. Gracenote Lookup: Allows you to access the Gracenote online database for additional media
information such as Disc Title, Genre, Year, Album, Artist and Cover Art.
On (default) – Enables the Gracenote service and allows the player to look up media
information and cover art from the Gracenote database. A broadband internet
connect
ion is
required (details on page 19).
OffDisables the Gracenote service.
Player Name OPPO BDP-103
Player Name: Enter and display the player’s identification name as it is displayed on local network
sharing products. To change it, press the ENTER button to bring the soft keyboard. The name can
contain maximum 12 characters including spaces.
Ethernet
S E T U P M E N U O PTI O N S
79
6. Internet Connection: Allows you to select the internet connection type.
Ethernet (default) – Connect to the internet through an Ethernet cable. Please refer to the
connection instructions on page 19. Selecting this will make the Wireless Setting option
gray and un-selectable.
Wireless – Connect to the internet through the external wireless adaptor. Please refer to the
connection instructions on page 20. Choosing Wireless will start the Wireless Setup
Assistant, and will also make the Wireless Setting option in the
next ro
w selectable.
Off – Internet access is prohibited. This will make all the remaining options in the Network
Setup screen gray and un-selectable.
7. Wireless SettingStart the Wireless Setup Assistant. You can start the Wireless Setup
Assistant by selecting the Wireless Setting option, or by selecting Wireless in Internet
Connection menu. The procedure is described as follows:
The player first searches for the last successful wireless settings. If they exist, a message
will pop up to remind you.
Use Previous – Uses the last successful wireless settings. A summary of the previous
wireless settings will display, showing information such as the SSID (network name),
Security Mode and Security Key (password).
After verifying the previous settings, the player will test the connection and display the
results.
Scan – Scans for an available wireless network. The player automatically scans for
any available wireless networks and displays the search results in a window. You
can press the UP/DOWN ARROW buttons to highlight a network and then press the
ENTER button to select it. If this network is secured, you will need to input the
security key using the remote control. The player will then test the connection and
display the results.
Start New – Creates a new wireless configuration. The BDP-103D supports three
wireless configuration methods:
SET U P M E NU O P T I ONS
80
ManualAllows you to manually enter the information for a wireless network. You
need to use the remote control to input the SSID, select the Security Mode and
input the Security Key. The player will then test the connection and display the
results.
WPS – Starts the Wi-Fi Protected Setup. The BDP-103D supports the WPS
standard to provide an easy and secure establishment of a wireless home network.
You may choose from the following setup options:
PIN Configures the WPS using a Personal Identification Number. The
BDP-103D will generate a PIN code and you will need to input it into
the software control panel of your wireless router or access point. Please
follow the on-screen instructions.
PBC Configures the WPS using Push Button Control. You need to push a
PBC button on your wireless router or access point to initiate the wireless
connection. Please follow the on-screen instructions.
NOTE
SSID is short for Service Set Identifier. It is an identifier for each wireless router or
access point, and is also referred as a network name.
WPS is short for Wi-Fi Protected Setup (WPS). It is the latest standard for easy and
secure wireless home network configuration. It is also named Wi-Fi Simple Config. To
use WPS, a WPS compatible router or access point is required.
8. IP Setting: Determines how the player obtains its IP address.
Auto (DHCP) The player automatically obtains its IP address information using DHCP
(Dynamic Host Configuration Protocol). This is the default setting. In most cases, automatic
IP configuration should be used.
ManualAllows you to manually enter the numeric IP address. Set the IP configuration
manually only when the router has no DHCP server functions or when the router’s DHCP
server function is disabled. For more information on how to manually configure the Internet
connection and
what values to use, please consult your broadband router/modem instruction
manuals or call your Internet service provider.
Internet Connection – Depending on the setting in Internet Connection, this can be
either “Wireless” or “Ethernet”.
IP Address – The Internet Protocol address of the player. When IP Setting is set to Auto
(DHCP) , the value displayed here is obtained using DHCP and cannot be changed.
S E T U P M E N U O PTI O N S
81
Subnet Mask: Each IP address has an associated subnet mask. It is used by the player
to decide whether to route network traffic through the router or directly to another device
on the same network. When IP Setting is set to Auto (DHCP), the value displayed here
is obtained using DHCP and cannot be changed.
Gateway: The IP address of the router. It is also called “default gateway” or “default
router”. When IP Setting is set to Auto (DH
CP), the value displayed here is obtained
using DHCP and cannot be changed.
DNS 1: The IP address of the primary DNS (Domain Name System) server. DNS is the
mechanism used to translate human-readable addresses (such as www.oppodigital.co.uk)
to numeric IP addresses. When IP Setting is set to Auto (DHCP), the value displayed
here is obtained using DHCP and cannot be changed.
DNS 2: The IP address of the secondary DNS server. When IP Setting is set to Auto
(DHCP), the value displayed here is obtained using DHCP and cannot be changed.
9. Proxy Setting: Allows you to configure the proxy server settings. The proxy server works as an
intermediary for network communication between clients and other servers,
which can provide
benefits like security, anonymity, or eve
n circumvention of regional restrictions.
On – Accesses the Internet via a proxy server.
Proxy Host: Input the proxy host name using the remote control.
Proxy Port: Input the proxy host port number using the remote control.
Off (default) – Disables the use of a proxy server.
We recommend keeping Proxy Setting set to Off, unless you have a working Proxy Host and
Proxy Port, and have to use the proxy
server in order to access the internet.
10. Connection Test: Allows you to test the Internet connection. It is recommended that you test the
connection when you initiall
y connect the player to the Internet, or whenever changes to Connection
Method, Wireless Setting, IP Setting and other network parameters are made.
82
REFERENCES
Useful Notes
In order to prolong the life of your player, it is recommended that you wait at least 30 seconds
before you power it on after switching it off.
Remove discs and turn the power off after operation.
Some functions of the player may not be applicable to certain discs.
Some discs with special features may not be fully supported by the player. This is not a
malfunction of the unit.
In the case of player malfunction, please turn it off, wait for 30 seconds and turn it back on. If the
problem still exists
, please follow the troubleshooting instructions or contact an OPPO service
centre.
Troubleshooting
Use this chart to resolve general operational problems. If there are any problems that you cannot resolve,
please contact your OPPO service centre.
Symptom Possible Cause Solution
Reference
Page
No sound
Audio cable is not properly
connected
Check audio cable, and then reconnect if necessary. 11
_
17
Mute is activated Press the MUTE button to cancel the mute. 28
Volume is too low Press the VOL + button to increase the volume to 100. 27
SACD is played and the audio
connection is coaxial or optical
digital audio
This is not supported due to copyright restrictions of
SACD. Please use the analogue or HDMI audio output.
Alternatively, you may set SACD Priority to CD mode
and the player will play the CD layer.
17, 51
DVD-Audio is played and the
audio connection is coaxial or
optical digital audio
This is not supported due to copyright restrictions of
DVD-Audio. Please use the analogue or HDMI audio
output. Alternatively, you may switch to the DVD-
Video playback mode.
17, 51
No picture
Video cable is not properly
connected
Check video cable; reconnect if necessary. 11
_
15
TV input is not correctly
selected
Select the input to which the player is connected.
“Pure Audio” mode engaged Press the PURE button to cancel this mode. 38
Video output format is not
support by the TV
Select a proper output resolution that is supported by
your TV.
31
Video system is not supported
by the TV
When playback is completely stopped, set the correct
TV System in the Setup Menu.
54
No colour
Video system is not supported
by the TV
When playback is completely stopped, set the correct
TV System in the Setup Menu.
54
Saturation set too low Check the saturation setting on TV and player. 58
Incorrect video output port
If using “DIAG.” output, check that the cable is not
incorrectly plugged into a component video jack.
13
Incorrect colour Incorrect colour space setting
If using HDMI for video output, check the colour space
setting on the TV and player.
61
Picture rolling or
split picture
Video system is not supported
by the TV
When playback is completely stopped, set the correct
TV System in the Setup Menu.
54
“No Disc” or
“Unknown Disc”
error
No disc or incompatible disc
loaded in player
42 .kcehc dna csid tcejE
Dirty disc recording surface Eject the disc and clean any dirt or fingerprints. 4
Disc not properly loaded
Eject disc and make sure the label side is facing up
and the record side is facing down.
24
Condensation on the Laser
pick-up head
Turn on the player, eject the disc and leave the player
on for about an hour.
2
R E F E R E N C E S
83
Remote control
failure
Remote control is out of range Use the remote control within the effective range. 9
9 .seirettab eht ecalpeR yrettab woL
Incorrect remote control code
Open the disc tray. Aim the remote at the player. Press
and hold the ENTER button on the remote for 5
seconds to set the remote code.
10
Temporary
function failure
Scratched or damaged disc is
used
24 .csid eht ecalpeR
Some functions are not
available during playback
Stop playback completely, then try again. 24
Interference from other devices
Identify interference by turning off other devices, and
then relocate or replace the offending device
2
Some Setup
Menu items are
grayed out
Some setup options cannot be
changed while a disc is playing.
Some setup options may be
mutually exclusive with other
setup options.
Fully stop playback, eject the disc and try the Setup
Menu again.
49
“Connection
Test” fails
No internet connection.
Verify that your router has a connection to the internet.
Try power cycling the modem and router. Try a direct
Ethernet connection if possible.
19, 20, 79
“Network” shows
no server
No network connection. Media
server not properly configured.
Connected to wrong network.
Verify that other network features are functional on the
device (YouTube, Netflix, etc.) If the network issues
are isolated to the “Network” feature, consult your
media server’s documentation to ensure proper
configuration.
19, 41
Internet
streaming fails
Poor wireless signal. Incorrect
network settings.
19, 42
Verify that the player is communicating with the router
(Setup Menu > Network Setup > Connection
Information). Change the DNS server information
(Google Public DNS / OpenDNS). If connecting
wirelessly, verify that your connection strength is >
50%. If it is lower, connect via Ethernet or use the USB
extension cable to move the Wi-Fi adapter closer to
your router.
R E F E R E N C E S
84
Specifications
Designs and specifications are subject to change without notice.
* Compatibility with user-encoded contents or user-created discs is on a best effort basis with no guarantee due
to the variation of media, software and techniques used.
**Nominal specification.
User Manual Updates Online
An updated version of the User Manual may be available online at the OPPO Digital UK Ltd web site
(www.oppodigital.co.uk ). To read or download the latest online User Manual, Click on
the BDP-103D
product, and open its “Support” tab.
Occasional updates are needed to reflect new features added to the player since the User Manual was
printed. As future firmware updates bring in new features and functions, the online version of the User
Manual will be updated accordingly.
Disc Types*
BD-Video, Blu-ray 3D, DVD-Video, DVD-Audio, AVCHD, SACD, CD, HDCD,
Kodak Picture CD, CD-R/RW, DVD±R/RW, DVD±R DL, BD-R/RE
BD Profile BD-ROM Version 2.5 Profile 5 (also compatible with Profile 1 Version 1.0 and 1.1)
Internal Storage 1GB (Actual space available for persistent storage varies due to system usage)
Output
Input
Audio
Characteristics**
Frequency: 20Hz – 20kHz (±0.05dB), 20Hz – 96kHz (-4.5dB ~ +0.05dB)
Signal-to-Noise Ratio: >115dB (A-weighted)
THD+N: < 0.006% (1kHz at 0dBFS, 20kHz LPF)
General
Specification
Power Supply: ~100V – 240V, 50/60Hz AC
Power Consumption: 35W (Standby: 0.5W in Energy Efficient Mode)
Dimensions: 16.8 x 12.2 x 3.1 inches (430mm x 311mm x 79mm)
Mass: 10.8 lbs (4.9kg)
Operating
Temperature
41°F – 95°F
5°C – 35°C
Operating
Humidity
15% – 75%
No condensation
HDMI Audio: up to 5.1ch/192kHz or 7.1ch/96kHz PCM, Dolby Digital, Dolby Digital Plus, DTS,
AAC.
HDMI Video: 480i/480p/576i/576p/720p/1080i/1080p/1080p24/1080p25/1080p30, 3D
frame-packing 720p/1080p24.
MHL Audio: up to 5.1ch/192kHz PCM, Dolby Digital, Dolby Digital Plus, DTS.
MHL Video: 480i/480p/576i/576p/720p/1080i/1080p24/1080p25/1080p30, 3D frame-packing
720p/1080p24.
Analogue Audio: 7.1ch, 5.1ch, stereo.
Coaxial/Optical Audio: up to 2ch/192kHz PCM, Dolby Digital, DTS.
HDMI Audio: up to 7.1ch/192kHz PCM, up to 5.1ch DSD, Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, DTS, DTS-HD High Resolution, DTS-HD Master Audio.
HDMI Video: 480i/480p/576i/576p/720p/1080i/1080p/1080p24/4Kx2K, 3D frame-packing
720p/1080p24.
R E F E R E N C ES
85
Language Code List
Code Language Name
6565 Afar
6566 Abkhazian
6570 Afrikaans
6577 Amharic
6582 Arabic
6583 Assamese
6588 Aymara
6590 Azerbaijani
6665 Bashkir
6669 Byelorussian
6671 Bulgarian
6672 Bihari
6678 Bengali, Bangla
6679 Tibetan
6682 Breton
6765 Catalan
6779 Corsican
6783 Czech
6789 Welsh
6865 Danish
6869 German
6890 Bhutani
6976 Greek
6978 English
6979 Esperanto
6983 Spanish
6984 Estonian
6985 Basque
7065 Persian
7073 Finnish
7074 Fi jian
7079 Faroese
7082 French
7089 Frisian
7165 Irish
7168 Scots Gaelic
7176 Galician
7178 Guarani
7185 Gujarati
7265 Hausa
7273 Hindi
7282 Croatian
Code Language Name
7285 Hungarian
7289 Armenian
7365 Interlingua
7378 Indonesian
7383 Icelandic
7384 Italian
7387 Hebrew
7465 Japanese
7473 Yiddish
7487 Javanese
7565 Georgian
7575 Kazakh
7576 Greenlandic
7577 Cambodian
7578 Kannada
7579 Korean
7583 Kashmiri
7585 Kurdish
7589 Kirghiz
7665 Latin
7678 Lingala
7679 Laothian
7684 Lithuanian
7686 Latvian,Lettish
7771 Malagasy
7773 Maori
7775 Macedonian
7776 Malayalam
7778 Mongolian
7779 Moldavian
7782 Marathi
7783 Malay
7784 Maltese
7789 Burmese
7865 Nauru
7869 Nepali
7876 Dutch
7879 Norwegian
7982 Oriya
8065 Panjabi
8076 Polish
8083 Pashto, Pushto
Code Language Name
8084 Portuguese
8185 Quechua
8277 Rhaeto-Romance
8279 Romanian
8285 Russian
8365 Sanskrit
8368 Sindhi
8372 Serbo-Croatian
8373 Singhalese
8375 Slovak
8376 Slovenian
8377 Samoan
8378 Shona
8379 Somali
8381 Albanian
8382 Serbian
8385 Sundanese
8386 Swedish
8387 Swahili
8465 Tamil
8469 Telugu
8471 Tajik
8472 Thai
8473 Tigrinya
8475 Turkmen
8476 Tagalog
8479 Tonga
8482 Turkish
8484 Tatar
8487 Twi
8575 Ukrainian
8582 Urdu
8590 Uzbek
8673 Vietnamese
8679 Volapuk
8779 Wolof
8872 Xhosa
8979 Yoruba
9072 Chinese
9085 Zulu
86
This application or device contains software from Gracenote, Inc. of Emeryville, California (“Gracenote”).
The software from Gracenote (the “Gracenote Software”) enables this application to do disc or file
identification and obtain music-related information, including name, artist, track, and title information
(“Gracenote Data”) from online servers or embedded databases (collectively, “Gracenote Servers”) and to
perform other functions. You may use Gracenote Data only by means of the intended End-User functions
of this application or device.
This application or device may contain content belonging to Gracenote’s providers. If so, all of the
restrictions set forth herein with respect to Gracenote Data shall also apply to such content and such
content providers shall be entitled to all of the benefits and protections set forth herein that are available to
Gracenote.
You agree that you will use Gracenote Data, the Gracenote Software, and Gracenote Servers for your
own personal non-commercial use only. You agree not to assign, copy, transfer or transmit the
Gracenote Software or any Gracenote Data to any third party. YOU AGREE NOT TO USE OR EXPLOIT
GRACENOTE DATA, THE GRACENOTE SOFTWARE, OR GRACENOTE SERVERS, EXCEPT AS
EXPRESSLY PERMITTED HEREIN.
You agree that your non-exclusive license to use the Gracenote Data, the Gracenote Software, and
Gracenote Servers will terminate if you violate these restrictions. If your license terminates, you agree to
cease any and all use of the Gracenote Data, the Gracenote Software, and Gracenote Servers.
Gracenote reserves all rights in Gracenote Data, the Gracenote Software, and the Gracenote Servers,
including all ownership rights. Under no circumstances will Gracenote become liable for any payment to
you for any information that you provide. You agree that Gracenote may enforce its rights under this
Agreement against you directly in its own name.
The Gracenote service uses a unique identifier to track queries for statistical purposes. The purpose of a
randomly assigned numeric identifier is to allow the Gracenote service to count queries without knowing
anything about who you are. For more information, see the web page for the Gracenote Privacy Policy for
the Gracenote service.
The Gracenote Software and each item of Gracenote Data are licensed to you “AS IS.” Gracenote makes
no representations or warranties, express or implied, regarding the accuracy of any Gracenote Data.
Gracenote reserves the right to delete data from the Gracenote Servers or to change data categories for
any cause that Gracenote deems sufficient. No warranty is made that the Gracenote Software or
Gracenote Servers are error-free or that functioning of Gracenote Software or Gracenote Servers will be
uninterrupted. Gracenote is not obligated to provide you with new enhanced or additional data types or
categories that Gracenote may provide in the future and is free to discontinue its services at any time.
GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, TITLE, AND NON-INFRINGEMENT. GRACENOTE DOES NOT WARRANT THE RESULTS
THAT WILL BE OBTAINED BY YOUR USE OF THE GRACENOTE SOFTWARE OR ANY GRACENOTE
SERVER. IN NO CASE WILL GRACENOTE BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGES OR FOR ANY LOST PROFITS OR LOST REVENUES.
© 2012. Gracenote, Inc. All Rights Reserved.
Gracenote Terms of Use
DARBEEVISION, INC.
LICENSE AGREEMENT
NOTICE -- READ THIS BEFORE USING THE DEVICE
1.
2.
87
3.
License: This Program and the accompanying Documentation are licensed, not sold, to you by
Darbeevision, Inc. (“Licensor”). The term “Program” shall also include any updates of the Program
licensed to you by Licensor. Subject to the terms of this agreement, you have a non-exclusive and
nontransferable right to use the Program and Documentation for (e.g., not for resale or rental or the
like), educational, evaluation or personal purposes only. You may use the Program only as
incorporated into the integrated circuit that is part of the particular unit of the device that contains it.
You agree to use your best efforts to prevent and protect the contents of the Program and
Documentation from unauthorized disclosure or use. Licensor and its licensors reserve all rights not
expressly granted to you. Licensor’s licensees are the intended third party beneficiaries of this
agreement and have the express right to rely upon and directly enforce the terms set forth herein.
THE DEVICE THAT YOU PURCHASED INCLUDES PROPRIETARY FIRMWARE (HEREINAFTER,
THE “PROGRAM”) INCORPORATED INTO INTEGRATED CIRCUITS. YOU MAY NOT COPY,
MODIFY, REVERSE ENGINEER, CLONE OR TRANSFER THE PROGRAM OR THE PRODUCT’S
DOCUMENTATION EXCEPT AS EXPRESSLY PROVIDED IN THIS AGREEMENT.
USING THE DEVICE ACCOMPANYING THIS LICENSE INDICATES YOUR ACCEPTANCE OF
THESE TERMS AND CONDITIONS. READ ALL OF THE TERMS AND CONDITIONS OF THIS
LICENSE AGREEMENT PRIOR TO INSTALLING OR USING THE DEVICE. IF YOU DO NOT
ACCEPT THESE TERMS, YOU MUST RETURN THE DEVICE TO THE SELLER AND REFRAIN
FROM USING IT.
Limitation on Use: You may not rent, lease, sell or otherwise transfer or distribute copies of the
Program or Documentation to others. You may not modify or translate the Program or the
Documentation without the prior written consent of Licensor. You may not reverse assemble, reverse
compile or otherwise attempt to create the source code from the Program. You may not use Licensor’s
name or other trademarks or refer to Licensor or Licensor’s products directly or indirectly
in any
papers, articles, advertisements, sales presentations, news releases or releases to any third party
without the prior written approval of Licensor for each such use. You may not release the results of any
performance or functional evaluation of any Program to any third party without prior written approval
of Licensor for each such release. This product provides the ability to turn off DARBEE Visual
Presence (DVP™) processing, because the DVP technology processing feature in this product is not
intended for commercial broadcast or theatrical presentation applications. By using this product, you
accept that the DVP technology ingredient is intended for personal or small network use and should
be switched off if this video processor system is used to process video for commercial broadcast or
commercial theatrical viewing applications. An additional commercial license is available from
DarbeeVision, Inc. for larger video network, distribution, commercial applications.
Copyright: The Program and related Documentation are copyrighted by Licensor. You may not opy
the Program (or this license). You may make one copy of the Documentation and print one copy of
any on-line documentation or other materials provided to you in electronic form. Any and all other
opies of the Program and any copy of the Documentation made by you are in violation of this
license.
88
5.
6.
Term and Termination: This license is effective until terminated.
4.
Ownership: You agree that the Program and Documentation belong to Licensor. You agree that you
neither own nor hereby acquire any claim or right of ownership to the Program and Documentation or
to any related patents, copyrights, trademarks or other intellectual property. Licensor retains all right,
title and interest in and to the Documentation and all copies and the Program at all times, regardless
of the form or media in or on which the original or other copies may subsequently exist. This license
is not a sale of the original or any subsequent copy.
DISCLAIMER OF WARRANTY: LICENSOR PROVIDES THE PROGRAM, THE PROPRIETARY IC
AND THE DOCUMENTATION “AS IS” WITHOUT WARRANTY OF ANY KIND EITHER EXPRESS,
IMPLIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. All risk of quality and
performance of the Program, the device into which it is incorporated and the Documentation is with the
Licensee. Should any of the foregoing prove defective, you and not Licensor assume the entire cost of
any service and repair. This disclaimer of warranty constitutes an essential part of this agreement.
7.
8.
9.
LIMITATION OF REMEDIES: IN NO EVENT WILL BE LIABLE FOR ANY INDIRECT DAMAGES OR
OTHER RELIEF ARISING OUT OF YOUR USE OR INABILITY TO USE THE PROGRAM, THE
DEVICE INTO WHICH IT IS INCORPORATED OR THE DOCUMENTATION, INCLUDING, BY WAY
OF ILLUSTRATION AND NOT LIMITATION, LOST PROFITS, LOST BUSINESS OR
LOSTOPPORTUNITY, OR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL OR
EXEMPLARY DAMAGES, INCLUDING LEGAL FEES, ARISING OUT OF SUCH USE OR INABILITY
TO USE THE PROGRAM, EVEN IF LICENSOR OR AN AUTHORIZED LICENSOR DEALER,
DISTRIBUTOR OR SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES,
OR FOR ANY CLAIM BY ANY OTHER PARTY.
Applicable Law; Dispute Resolution: This license will be governed by the laws of the State of
California, without reference to conflicts of laws
principles. The United Nations Convention on
Contracts for the Sale of Goods does not apply to this license. All disputes hereunder shall be settled
in the state or federal courts located in Orange County, California.
Export Controls: The Program and the underlying information and technology may not be
downloaded or otherwise exported or reexported (i) into (or to a national or resident of) Cuba, North
Korea, Iran, Syria, Sudan or any other country to which the U.S. has embargoed goods; or (ii) to
anyone on the U.S. Treasury Department’s list of Specially Designated Nationals or the U.S.
Commerce Department’s Table of Deny Orders. By downloading or using the Program, you are
agreeing to the foregoing and you represent and warrant that you are not located in, under the control
of, or a national or resident of any such country or on any such list.
10.
11. No Other Agreements: This Agreement constitutes the entire agreement between the parties with
respect to the Program and the Documentation, and supersedes any other written or oral agreement.
U.S. Government End Users: Every sale, license, or other distribution of any Licensee Product to
a customer which is a department, division, or agency of the United States Government shall contain
the following provision, or a substantially equivalent provision: U.S. GOVERNMENT RESTRICTED
RIGHTS LEGEND. Use, duplication, or disclosure of this software by the Government is subject to the
conditions set forth in FAR 12.212 and DFARS 227.720 and/or in similar or successor clauses in the
FAR or Supplements to it. Any and all use, duplication, transfer for any reason is restricted in
accordance with the terms and conditions of the Licensor’s standard commercial license agreement
which is incorporated herein as though fully set forth. All other use, for any reason, is prohibited.
89
LIMITED WARRANTY
OPPO Digital UK Ltd. Limited Two Years Warranty
Your OPPO product has been manufactured to precise standards, and with rigid quality control
throughout every process of manufacturing. It is warranted by OPPO Digital UK Ltd against faulty materials
or workmanship for two (2) full years from the original date of purchase.
This warranty applies only to OPPO brand products purchased from OPPO Digital UK Ltd or an authorised
OPPO Digital UK Ltd retailer within the United Kingdom or other European country. The warranty provided
is only applicable to the country in which the product was purchased and the warranty does not apply to
any OPPO brand products sold by unauthorised OPPO Digital UK Ltd retailers, to any products purchased
outside the United Kingdom or other European countries or any products that are taken outside the
United Kingdom or other European country with
in which it was originally purchased.
During the warranty period OPPO Digital UK Ltd will, at its option, repair or replace the product free of
charge provided that:
1. the product has been registered at the website set out below;
2. the product is returned toOPPO Digital UK Ltd with evidence of the purchase date in accordance
with the claims procedure outlined below;
3. the product has been purchased by the user for domestic, non-commercial use and has not
been used for hire purposes or other purposes for which this product was not intended;
4. the product has not been misused or handled carelessly, deliberately damaged, neglected,
tampered with, incorrectly installed, used on a voltage supply other than that stamped on the
product or operated ot
herwise than in accordance with the operating and maintenance
instructions;
5. the product or the serial number have not been altered or, in the case of the serial number,
removed;
6. the product has not been damaged by any ancillary equipment not furnished or recommended
byOPPO Digital UK Ltd that is attached to or used in connection with the product;
7. and repairs have not been attempted other than by OPPO Digital UK Ltd or an OPPO Digital UK
Ltd authorised service centre and the warranty shall be invalidated if unauthorised persons carry
out any alterations and/or repairs.
This limited warranty does not cover cosmetic damage and/or non-functional parts which do not affect
the normal use of the product, consumer replaceable items including, but not limited to, batteries, cables,
light bulbs and
other consumables, and any damage caused by electrical fluctuations or surges, fire,
water, lightning or other acts of nature.
OPPO Digital UK Ltd does not warrant uninterrupted or error-free operation of the product. This limited
warranty shall not extend to anyone other than the original purchaser of the product. It is non-
transferable.
This warranty does not confer any rights other than those expressly set out herein and does not cover
any claims for consequential loss or damage. The warranty provides benefits which are additional to
and do not affect your statutory rights as a consumer in the country in which the product was purchased.
OPPO Digital UK Ltd provide the repair service without charge up to a cost equal to the original purchase
price paid
for the product and the liability of OPPO Digital UK Ltd or other OPPO Digital UK Ltd authorised
service centre is limited to the original purchase price paid for the product.
TO REGISTER YOUR PURCHASE FOR WARRANTY COVER, please visit the following Website:
http://www.oppodigital.co.uk
and visit the Customer Services area.
90
CLAIMS PROCEDURE, please follow these instructions:
Contact OPPO customer service via email at service@www.oppodigital.co.uk
or by phone at 0845
060 9395 with details of the defect claimed, product model, serial number, date and place of the
original purchase.
If it is determined by the OPPO customer services team that your product needs repairing or
replacing, a Return Merchandise Authorization (RMA) number will be issued to you along with
return instructions and address of an OPPO service centre.
The product should be packed securely, preferably in the original packaging, with your assigned
RMA number marked clearly on the outside of the package. Send the package carriage paid
and insured to the OPPO service centre together with evidence of the purchase date (preferably
a receipt or purchase invoice).
PLEASE NOTE that it is essential that any email or telephone call is received on the last day of
this warranty at the latest. Late claims will not be considered.
Thank you for choosing OPPO. Your satisfaction is our highest priority.
94

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Oppo BDP-103D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Oppo BDP-103D in de taal/talen: Engels als bijlage per email.

De handleiding is 36,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Oppo BDP-103D

Oppo BDP-103D Gebruiksaanwijzing - Français - 94 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info